arm64: dts: rockchip: add rk3588 PCIe2 support

Add all three PCIe2 IP blocks to the RK3588 DT. Note, that RK3588
also has two PCIe3 IP blocks, that will be handled separately.

Co-developed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-neu6a, 6b
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

2 files changed, 153 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
index d2ae3760d5f8..5519c1430cb7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -187,6 +187,57 @@
 		};
 	};
 
+	pcie2x1l0: pcie@fe170000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x20 0x2f>;
+		clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
+			 <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
+			 <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
+				<0 0 0 2 &pcie2x1l0_intc 1>,
+				<0 0 0 3 &pcie2x1l0_intc 2>,
+				<0 0 0 4 &pcie2x1l0_intc 3>;
+		linux,pci-domain = <2>;
+		max-link-speed = <2>;
+		msi-map = <0x2000 &its0 0x2000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy1_ps PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
+		reg = <0xa 0x40800000 0x0 0x00400000>,
+		      <0x0 0xfe170000 0x0 0x00010000>,
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l0_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
 	gmac0: ethernet@fe1b0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1b0000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index c9f9dd2472f5..5544f66c6ff4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -1227,6 +1227,108 @@
 		reg = <0x0 0xfdf82200 0x0 0x20>;
 	};
 
+	pcie2x1l1: pcie@fe180000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x30 0x3f>;
+		clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
+			 <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
+			 <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
+				<0 0 0 2 &pcie2x1l1_intc 1>,
+				<0 0 0 3 &pcie2x1l1_intc 2>,
+				<0 0 0 4 &pcie2x1l1_intc 3>;
+		linux,pci-domain = <3>;
+		max-link-speed = <2>;
+		msi-map = <0x3000 &its0 0x3000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy2_psu PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
+		reg = <0xa 0x40c00000 0x0 0x00400000>,
+		      <0x0 0xfe180000 0x0 0x00010000>,
+		      <0x0 0xf3000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie2x1l2: pcie@fe190000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x40 0x4f>;
+		clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
+			 <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
+			 <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
+				<0 0 0 2 &pcie2x1l2_intc 1>,
+				<0 0 0 3 &pcie2x1l2_intc 2>,
+				<0 0 0 4 &pcie2x1l2_intc 3>;
+		linux,pci-domain = <4>;
+		max-link-speed = <2>;
+		msi-map = <0x4000 &its0 0x4000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy0_ps PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
+		reg = <0xa 0x41000000 0x0 0x00400000>,
+		      <0x0 0xfe190000 0x0 0x00010000>,
+		      <0x0 0xf4000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
 	gmac1: ethernet@fe1c0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1c0000 0x0 0x10000>;