diff options
| author | Stephan Gerhold <stephan@gerhold.net> | 2023-05-29 14:46:58 +0200 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2023-05-29 14:37:01 -0700 |
| commit | 41e22c2ff38eaea777f1158071539e659aa7980d (patch) | |
| tree | cba75067ec38286420d058ae1040ee0f1802bde3 /arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts | |
| parent | eaa53a85748d58c4398c5c9acaa8d01d92adbb67 (diff) | |
| download | lwn-41e22c2ff38eaea777f1158071539e659aa7980d.tar.gz lwn-41e22c2ff38eaea777f1158071539e659aa7980d.zip | |
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.
Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index a1ca4d883420..9068aa6f7b29 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -15,7 +15,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -28,7 +28,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -41,7 +41,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -67,7 +67,7 @@ compatible = "zinitix,bt541"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <540>; @@ -93,7 +93,7 @@ vdd3-supply = <®_panel_vdd3>; vci-supply = <&pm8916_l17>; - reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { @@ -120,7 +120,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; function = "gpio"; |