Merge branch 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)

 - conversion to use the i2c_8bit_addr_from_msg macro consistently

 - move includes to platform_data

 - core updates to allow the (still in review) I3C subsystem to connect

 - and the regular share of smaller driver updates

* 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
  i2c: qup: fix building without CONFIG_ACPI
  i2c: tegra: Remove suspend-resume
  i2c: imx-lpi2c: Switch to SPDX identifier
  i2c: mxs: Switch to SPDX identifier
  i2c: busses: make use of i2c_8bit_addr_from_msg
  i2c: algos: make use of i2c_8bit_addr_from_msg
  i2c: rcar: document R8A77980 bindings
  i2c: qup: Add command-line parameter to override SCL frequency
  i2c: qup: Correct duty cycle for FM and FM+
  i2c: qup: Add support for Fast Mode Plus
  i2c: qup: add probe path for Centriq ACPI devices
  i2c: robotfuzz-osif: drop pointless test
  i2c: robotfuzz-osif: remove pointless local variable
  i2c: rk3x: Don't print visible virtual mapping MMIO address
  i2c: opal: don't check number of messages in the driver
  i2c: ibm_iic: don't check number of messages in the driver
  i2c: imx: Switch to SPDX identifier
  i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
  i2c: mux: demux-pinctrl: use proper parent device for demux adapter
  i2c: mux: improve error message for failed symlink
  ...

3 files changed, 7 insertions, 3 deletions

diff --git a/Documentation/i2c/busses/i2c-mlxcpld b/Documentation/i2c/busses/i2c-mlxcpld
index 4e46c440b38d..925904aa9b57 100644
--- a/Documentation/i2c/busses/i2c-mlxcpld
+++ b/Documentation/i2c/busses/i2c-mlxcpld
@@ -20,6 +20,10 @@ The next transaction types are supported:
  - Write Byte/Block.
 
 Registers:
+CPBLTY		0x0 - capability reg.
+			Bits [6:5] - transaction length. b01 - 72B is supported,
+			36B in other case.
+			Bit 7 - SMBus block read support.
 CTRL		0x1 - control reg.
 			Resets all the registers.
 HALF_CYC	0x4 - cycle reg.
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index 9e1dfe7553ad..4e713f4cdb2f 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -18,7 +18,7 @@ Usage
 i2c-ocores uses the platform bus, so you need to provide a struct
 platform_device with the base address and interrupt number. The
 dev.platform_data of the device should also point to a struct
-ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
+ocores_i2c_platform_data (see linux/platform_data/i2c-ocores.h) describing the
 distance between registers and the input clock speed.
 There is also a possibility to attach a list of i2c_board_info which
 the i2c-ocores driver will add to the bus upon creation.
diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio
index 7a8d7d261632..893ecdfe6e43 100644
--- a/Documentation/i2c/muxes/i2c-mux-gpio
+++ b/Documentation/i2c/muxes/i2c-mux-gpio
@@ -30,12 +30,12 @@ i2c-mux-gpio uses the platform bus, so you need to provide a struct
 platform_device with the platform_data pointing to a struct
 i2c_mux_gpio_platform_data with the I2C adapter number of the master
 bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/i2c-mux-gpio.h for details.
+to control it. See include/linux/platform_data/i2c-mux-gpio.h for details.
 
 E.G. something like this for a MUX providing 4 bus segments
 controlled through 3 GPIO pins:
 
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
 #include <linux/platform_device.h>
 
 static const unsigned myboard_gpiomux_gpios[] = {