Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...

7 files changed, 100 insertions, 107 deletions

diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
index 26e542eb96df..43e580ef64ba 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
@@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or
 disables the access of Audio FIFOs to DDR on AXG based SoC.
 
 Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb'
+- compatible: 'amlogic,meson-axg-audio-arb' or
+	      'amlogic,meson-sm1-audio-arb'
 - reg: physical base address of the controller and length of memory
        mapped region.
 - clocks: phandle to the fifo peripheral clock provided by the audio
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index 00917d868d58..b3f57d81f007 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -16,6 +16,7 @@ properties:
       - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
       - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
+      - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
deleted file mode 100644
index 510c748656ec..000000000000
--- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Qualcomm AOSS Reset Controller
-======================================
-
-This binding describes a reset-controller found on AOSS-CC (always on subsystem)
-for Qualcomm SDM845 SoCs.
-
-Required properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,sdm845-aoss-cc"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the register
-	            space.
-
-- #reset-cells:
-	Usage: required
-	Value type: <uint>
-	Definition: must be 1; cell entry represents the reset index.
-
-Example:
-
-aoss_reset: reset-controller@c2a0000 {
-	compatible = "qcom,sdm845-aoss-cc";
-	reg = <0xc2a0000 0x31000>;
-	#reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For list of all valid reset indicies see
-<dt-bindings/reset/qcom,sdm845-aoss.h>
-
-Example:
-
-modem-pil@4080000 {
-	...
-
-	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
-	reset-names = "mss_restart";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
new file mode 100644
index 000000000000..e2d85a1e1d63
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm AOSS Reset Controller
+
+maintainers:
+  - Sibi Sankar <sibis@codeaurora.org>
+
+description:
+  The bindings describe the reset-controller found on AOSS-CC (always on
+  subsystem) for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7180-aoss-cc"
+          - const: "qcom,sdm845-aoss-cc"
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sdm845-aoss-cc"
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    aoss_reset: reset-controller@c2a0000 {
+      compatible = "qcom,sdm845-aoss-cc";
+      reg = <0xc2a0000 0x31000>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
deleted file mode 100644
index a62a492843e7..000000000000
--- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-PDC Global
-======================================
-
-This binding describes a reset-controller found on PDC-Global (Power Domain
-Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
-
-Required properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,sdm845-pdc-global"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the register
-	            space.
-
-- #reset-cells:
-	Usage: required
-	Value type: <uint>
-	Definition: must be 1; cell entry represents the reset index.
-
-Example:
-
-pdc_reset: reset-controller@b2e0000 {
-	compatible = "qcom,sdm845-pdc-global";
-	reg = <0xb2e0000 0x20000>;
-	#reset-cells = <1>;
-};
-
-PDC reset clients
-======================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For a list of all valid reset indices see
-<dt-bindings/reset/qcom,sdm845-pdc.h>
-
-Example:
-
-modem-pil@4080000 {
-	...
-
-	resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
-	reset-names = "pdc_reset";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
new file mode 100644
index 000000000000..d7d8cec9419f
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PDC Global
+
+maintainers:
+  - Sibi Sankar <sibis@codeaurora.org>
+
+description:
+  The bindings describes the reset-controller found on PDC-Global (Power Domain
+  Controller) block for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7180-pdc-global"
+          - const: "qcom,sdm845-pdc-global"
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sdm845-pdc-global"
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pdc_reset: reset-controller@b2e0000 {
+      compatible = "qcom,sdm845-pdc-global";
+      reg = <0xb2e0000 0x20000>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index ea005177d20a..e320a8cc9e4d 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -130,6 +130,7 @@ this layer. These clocks and resets should be described in each property.
 Required properties:
 - compatible: Should be
     "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
+    "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3
     "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
     "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
     "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
@@ -141,12 +142,12 @@ Required properties:
 - clocks: A list of phandles to the clock gate for the glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 - resets: A list of phandles to the reset control for the glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 
 Example: