diff options
| author | Dragan Simic <dsimic@manjaro.org> | 2024-10-14 22:21:57 +0200 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2024-10-22 16:10:27 +0200 |
| commit | f3c6526d6fb25b9627cb39cc63fec8f88ecf17b5 (patch) | |
| tree | 3587355720750988605381ce11c51d5304eb800f | |
| parent | e684f02492f99d6f6f037a35a613607339cf8e8f (diff) | |
| download | lwn-f3c6526d6fb25b9627cb39cc63fec8f88ecf17b5.tar.gz lwn-f3c6526d6fb25b9627cb39cc63fec8f88ecf17b5.zip | |
arm64: dts: rockchip: Convert dts files used as parents to dtsi files
Including a board dts file is not the right way to represent the hierarchical
nature of the board dts files and to create a dts file for another variant of
an ancestor board. However, a few boards and their variants (ab)used this
approach, so let's clean that up by converting the common ancestors into dtsi
files, and by adding separate board-variant dts files.
No functional changes are introduced, which was validated by decompiling and
comparing all affected board dtb files before and after these changes. In
more detail, the affected dtb files have some of their blocks shuffled around
a bit and some of their phandles have different values, as a result of the
changes to the order in which the building blocks from the parent dtsi files
are included, but they effectively remain the same as the originals.
The only perceivable introduced change is the turning of "roc-rk3328-cc" into
"ROC-RK3328-CC", which is the model name of one of the affected boards, which
was performed to match the styling of the official board name.
As a side note, due to the nature of introduced changes, this commit is best
viewed using "-B80%/80% -M20% -C5%" as the set of options for git-log(1).
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/f3d789c14fe34a53327cac03cd3837e530e21f5c.1728937091.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
22 files changed, 2197 insertions, 2066 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi new file mode 100644 index 000000000000..d6c90649d1fb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 David Bauer <mail@david-bauer.net> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "rk3328.dtsi" + +/ { + aliases { + ethernet0 = &gmac2io; + ethernet1 = &rtl8153; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clk: gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&reset_button_pin>; + pinctrl-names = "default"; + + key-reset { + label = "reset"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <50>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; + pinctrl-names = "default"; + + lan_led: led-0 { + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + label = "nanopi-r2s:green:lan"; + }; + + sys_led: led-1 { + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + label = "nanopi-r2s:red:sys"; + default-state = "on"; + }; + + wan_led: led-2 { + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + label = "nanopi-r2s:green:wan"; + }; + }; + + vcc_io_sdio: sdmmcio-regulator { + compatible = "regulator-gpio"; + enable-active-high; + gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdio_vcc_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_io_sdio"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <5000>; + regulator-type = "voltage"; + startup-delay-us = <2000>; + states = <1800000 0x1>, + <3300000 0x0>; + vin-supply = <&vcc_io_33>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc0m1_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io_33>; + }; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_5v_lan: vdd-5v-lan { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lan_vdd_pin>; + pinctrl-names = "default"; + regulator-name = "vdd_5v_lan"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "disabled"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc_io_33>; + pinctrl-0 = <&rgmiim1_pins>; + pinctrl-names = "default"; + snps,aal; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pmic_int_l>; + pinctrl-names = "default"; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vdd_5v>; + vcc2-supply = <&vdd_5v>; + vcc3-supply = <&vdd_5v>; + vcc4-supply = <&vdd_5v>; + vcc5-supply = <&vcc_io_33>; + vcc6-supply = <&vdd_5v>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io_33: DCDC_REG4 { + regulator-name = "vcc_io_33"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&io_domains { + pmuio-supply = <&vcc_io_33>; + vccio1-supply = <&vcc_io_33>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io_sdio>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io_33>; + vccio6-supply = <&vcc_io_33>; + status = "okay"; +}; + +&pinctrl { + button { + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac2io { + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lan { + lan_vdd_pin: lan-vdd-pin { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd { + sdio_vcc_pin: sdio-vcc-pin { + rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + pinctrl-names = "default"; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_io_sdio>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Second port is for USB 3.0 */ + rtl8153: device@2 { + compatible = "usbbda,8153"; + reg = <2>; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts index 16a1958e4572..3709ba30bbd4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts @@ -7,7 +7,8 @@ */ /dts-v1/; -#include "rk3328-nanopi-r2c.dts" + +#include "rk3328-nanopi-r2c.dtsi" / { model = "FriendlyElec NanoPi R2C Plus"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts index a07a26b944a0..e8ab773dc245 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts @@ -7,34 +7,10 @@ */ /dts-v1/; -#include "rk3328-nanopi-r2s.dts" + +#include "rk3328-nanopi-r2c.dtsi" / { model = "FriendlyElec NanoPi R2C"; compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328"; }; - -&gmac2io { - phy-handle = <&yt8521s>; - tx_delay = <0x22>; - rx_delay = <0x12>; - - mdio { - /delete-node/ ethernet-phy@1; - - yt8521s: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <3>; - - motorcomm,clk-out-frequency-hz = <125000000>; - motorcomm,keep-pll-enabled; - motorcomm,auto-sleep-disabled; - - pinctrl-0 = <ð_phy_reset_pin>; - pinctrl-names = "default"; - reset-assert-us = <10000>; - reset-deassert-us = <50000>; - reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dtsi new file mode 100644 index 000000000000..3b0457de2a98 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; + +#include "rk3328-nanopi-r2.dtsi" + +&gmac2io { + phy-handle = <&yt8521s>; + tx_delay = <0x22>; + rx_delay = <0x12>; + status = "okay"; + + mdio { + yt8521s: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts index cb81ba3f23ff..8ae9b7550816 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts @@ -7,7 +7,8 @@ */ /dts-v1/; -#include "rk3328-nanopi-r2s.dts" + +#include "rk3328-nanopi-r2s.dtsi" / { compatible = "friendlyarm,nanopi-r2s-plus", "rockchip,rk3328"; @@ -30,3 +31,20 @@ supports-emmc; status = "okay"; }; + +&gmac2io { + phy-handle = <&rtl8211e>; + tx_delay = <0x24>; + rx_delay = <0x18>; + + mdio { + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index a10847509bfe..8579f22a1942 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -5,406 +5,9 @@ /dts-v1/; -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include "rk3328.dtsi" +#include "rk3328-nanopi-r2s.dtsi" / { model = "FriendlyElec NanoPi R2S"; compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; - - aliases { - ethernet0 = &gmac2io; - ethernet1 = &rtl8153; - mmc0 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac_clk: gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_clkin"; - #clock-cells = <0>; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&reset_button_pin>; - pinctrl-names = "default"; - - key-reset { - label = "reset"; - gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <50>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; - pinctrl-names = "default"; - - lan_led: led-0 { - gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - label = "nanopi-r2s:green:lan"; - }; - - sys_led: led-1 { - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - label = "nanopi-r2s:red:sys"; - default-state = "on"; - }; - - wan_led: led-2 { - gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; - label = "nanopi-r2s:green:wan"; - }; - }; - - vcc_io_sdio: sdmmcio-regulator { - compatible = "regulator-gpio"; - enable-active-high; - gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&sdio_vcc_pin>; - pinctrl-names = "default"; - regulator-name = "vcc_io_sdio"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-settling-time-us = <5000>; - regulator-type = "voltage"; - startup-delay-us = <2000>; - states = <1800000 0x1>, - <3300000 0x0>; - vin-supply = <&vcc_io_33>; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&sdmmc0m1_pin>; - pinctrl-names = "default"; - regulator-name = "vcc_sd"; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_io_33>; - }; - - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vdd_5v_lan: vdd-5v-lan { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&lan_vdd_pin>; - pinctrl-names = "default"; - regulator-name = "vdd_5v_lan"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_5v>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&display_subsystem { - status = "disabled"; -}; - -&gmac2io { - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; - assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; - clock_in_out = "input"; - phy-handle = <&rtl8211e>; - phy-mode = "rgmii"; - phy-supply = <&vcc_io_33>; - pinctrl-0 = <&rgmiim1_pins>; - pinctrl-names = "default"; - rx_delay = <0x18>; - snps,aal; - tx_delay = <0x24>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - rtl8211e: ethernet-phy@1 { - reg = <1>; - pinctrl-0 = <ð_phy_reset_pin>; - pinctrl-names = "default"; - reset-assert-us = <10000>; - reset-deassert-us = <50000>; - reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&i2c1 { - status = "okay"; - - rk805: pmic@18 { - compatible = "rockchip,rk805"; - reg = <0x18>; - interrupt-parent = <&gpio1>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk805-clkout2"; - gpio-controller; - #gpio-cells = <2>; - pinctrl-0 = <&pmic_int_l>; - pinctrl-names = "default"; - system-power-controller; - wakeup-source; - - vcc1-supply = <&vdd_5v>; - vcc2-supply = <&vdd_5v>; - vcc3-supply = <&vdd_5v>; - vcc4-supply = <&vdd_5v>; - vcc5-supply = <&vcc_io_33>; - vcc6-supply = <&vdd_5v>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1450000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1450000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io_33: DCDC_REG4 { - regulator-name = "vcc_io_33"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_18: LDO_REG1 { - regulator-name = "vcc_18"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_emmc: LDO_REG2 { - regulator-name = "vcc18_emmc"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_10: LDO_REG3 { - regulator-name = "vdd_10"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - }; - }; -}; - -&io_domains { - pmuio-supply = <&vcc_io_33>; - vccio1-supply = <&vcc_io_33>; - vccio2-supply = <&vcc18_emmc>; - vccio3-supply = <&vcc_io_sdio>; - vccio4-supply = <&vcc_18>; - vccio5-supply = <&vcc_io_33>; - vccio6-supply = <&vcc_io_33>; - status = "okay"; -}; - -&pinctrl { - button { - reset_button_pin: reset-button-pin { - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - gmac2io { - eth_phy_reset_pin: eth-phy-reset-pin { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - leds { - lan_led_pin: lan-led-pin { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - sys_led_pin: sys-led-pin { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lan { - lan_vdd_pin: lan-vdd-pin { - rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sd { - sdio_vcc_pin: sdio-vcc-pin { - rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm2 { - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - disable-wp; - pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; - pinctrl-names = "default"; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vcc_io_sdio>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&u2phy { - status = "okay"; -}; - -&u2phy_host { - status = "okay"; -}; - -&u2phy_otg { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb20_otg { - status = "okay"; - dr_mode = "host"; -}; - -&usbdrd3 { - dr_mode = "host"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - /* Second port is for USB 3.0 */ - rtl8153: device@2 { - compatible = "usbbda,8153"; - reg = <2>; - }; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dtsi new file mode 100644 index 000000000000..308e526c2861 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * (C) Copyright 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + */ + +/dts-v1/; + +#include "rk3328-nanopi-r2.dtsi" + +&gmac2io { + phy-handle = <&rtl8211e>; + tx_delay = <0x24>; + rx_delay = <0x18>; + status = "okay"; + + mdio { + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 4237f2ee8fee..67c246ad8b8c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -7,7 +7,8 @@ */ /dts-v1/; -#include "rk3328-orangepi-r1-plus.dts" + +#include "rk3328-orangepi-r1-plus.dtsi" / { model = "Xunlong Orange Pi R1 Plus LTS"; @@ -18,10 +19,9 @@ phy-handle = <&yt8531c>; tx_delay = <0x19>; rx_delay = <0x05>; + status = "okay"; mdio { - /delete-node/ ethernet-phy@1; - yt8531c: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index 99499a0bab19..324a8e951f7e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -6,127 +6,20 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include "rk3328.dtsi" +#include "rk3328-orangepi-r1-plus.dtsi" / { model = "Xunlong Orange Pi R1 Plus"; compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; - - aliases { - ethernet0 = &gmac2io; - ethernet1 = &rtl8153; - mmc0 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac_clk: gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_clkin"; - #clock-cells = <0>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; - pinctrl-names = "default"; - - led-0 { - function = LED_FUNCTION_LAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-2 { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; - }; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&sdmmc0m1_pin>; - pinctrl-names = "default"; - regulator-name = "vcc_sd"; - regulator-boot-on; - vin-supply = <&vcc_io>; - }; - - vcc_sys: vcc-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vdd_5v_lan: vdd-5v-lan-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&lan_vdd_pin>; - pinctrl-names = "default"; - regulator-name = "vdd_5v_lan"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&display_subsystem { - status = "disabled"; }; &gmac2io { - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; - assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; - clock_in_out = "input"; phy-handle = <&rtl8211e>; - phy-mode = "rgmii"; - phy-supply = <&vcc_io>; - pinctrl-0 = <&rgmiim1_pins>; - pinctrl-names = "default"; - snps,aal; - rx_delay = <0x18>; tx_delay = <0x24>; + rx_delay = <0x18>; status = "okay"; mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - rtl8211e: ethernet-phy@1 { reg = <1>; pinctrl-0 = <ð_phy_reset_pin>; @@ -137,238 +30,3 @@ }; }; }; - -&i2c1 { - status = "okay"; - - rk805: pmic@18 { - compatible = "rockchip,rk805"; - reg = <0x18>; - interrupt-parent = <&gpio1>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk805-clkout2"; - gpio-controller; - #gpio-cells = <2>; - pinctrl-0 = <&pmic_int_l>; - pinctrl-names = "default"; - system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vcc_io>; - vcc6-supply = <&vcc_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1450000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1450000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-name = "vcc_io"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_18: LDO_REG1 { - regulator-name = "vcc_18"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_emmc: LDO_REG2 { - regulator-name = "vcc18_emmc"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_10: LDO_REG3 { - regulator-name = "vdd_10"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - }; - }; -}; - -&io_domains { - pmuio-supply = <&vcc_io>; - vccio1-supply = <&vcc_io>; - vccio2-supply = <&vcc18_emmc>; - vccio3-supply = <&vcc_io>; - vccio4-supply = <&vcc_io>; - vccio5-supply = <&vcc_io>; - vccio6-supply = <&vcc_io>; - status = "okay"; -}; - -&pinctrl { - gmac2io { - eth_phy_reset_pin: eth-phy-reset-pin { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - leds { - lan_led_pin: lan-led-pin { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - sys_led_pin: sys-led-pin { - rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - lan { - lan_vdd_pin: lan-vdd-pin { - rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm2 { - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - disable-wp; - pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&vcc_sd>; - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -&tsadc { - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&u2phy { - status = "okay"; -}; - -&u2phy_host { - status = "okay"; -}; - -&u2phy_otg { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb20_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbdrd3 { - dr_mode = "host"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - /* Second port is for USB 3.0 */ - rtl8153: device@2 { - compatible = "usbbda,8153"; - reg = <2>; - }; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi new file mode 100644 index 000000000000..1898ce66a244 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Based on rk3328-nanopi-r2s.dts, which is: + * Copyright (c) 2020 David Bauer <mail@david-bauer.net> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3328.dtsi" + +/ { + aliases { + ethernet0 = &gmac2io; + ethernet1 = &rtl8153; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clk: gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; + pinctrl-names = "default"; + + led-0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc0m1_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_5v_lan: vdd-5v-lan-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lan_vdd_pin>; + pinctrl-names = "default"; + regulator-name = "vdd_5v_lan"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "disabled"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-0 = <&rgmiim1_pins>; + pinctrl-names = "default"; + snps,aal; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pmic_int_l>; + pinctrl-names = "default"; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&io_domains { + pmuio-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_io>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + gmac2io { + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lan { + lan_vdd_pin: lan-vdd-pin { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd3 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Second port is for USB 3.0 */ + rtl8153: device@2 { + compatible = "usbbda,8153"; + reg = <2>; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 88bb95075b6f..1ea4b2a95a09 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -4,381 +4,24 @@ */ /dts-v1/; -#include "rk3328.dtsi" + +#include <dt-bindings/input/input.h> +#include "rk3328-roc.dtsi" / { - model = "Firefly roc-rk3328-cc"; + model = "Firefly ROC-RK3328-CC"; compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; - - aliases { - ethernet0 = &gmac2io; - mmc0 = &sdmmc; - mmc1 = &emmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac_clkin: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac_clkin"; - #clock-cells = <0>; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_pin>; - regulator-boot-on; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_io>; - }; - - vcc_sdio: sdmmcio-regulator { - compatible = "regulator-gpio"; - gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1>, - <3300000 0x0>; - regulator-name = "vcc_sdio"; - regulator-type = "voltage"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb20_host_drv>; - regulator-name = "vcc_host1_5v"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - - leds { - compatible = "gpio-leds"; - - power_led: led-0 { - label = "firefly:blue:power"; - linux,default-trigger = "heartbeat"; - gpios = <&rk805 1 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - user_led: led-1 { - label = "firefly:yellow:user"; - linux,default-trigger = "mmc1"; - gpios = <&rk805 0 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; -}; - -&analog_sound { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <150000000>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc18_emmc>; - status = "okay"; -}; - -&gmac2io { - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; - assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; - clock_in_out = "input"; - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_pins>; - snps,aal; - snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - snps,rxpbl = <0x4>; - snps,txpbl = <0x4>; - tx_delay = <0x24>; - rx_delay = <0x18>; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmiphy { - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - rk805: pmic@18 { - compatible = "rockchip,rk805"; - reg = <0x18>; - interrupt-parent = <&gpio1>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk805-clkout2"; - gpio-controller; - #gpio-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vcc_io>; - vcc6-supply = <&vcc_io>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-name = "vcc_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_18: LDO_REG1 { - regulator-name = "vcc_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_emmc: LDO_REG2 { - regulator-name = "vcc18_emmc"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_10: LDO_REG3 { - regulator-name = "vdd_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - }; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&i2s1 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - vccio1-supply = <&vcc_io>; - vccio2-supply = <&vcc18_emmc>; - vccio3-supply = <&vcc_sdio>; - vccio4-supply = <&vcc_18>; - vccio5-supply = <&vcc_io>; - vccio6-supply = <&vcc_io>; - pmuio-supply = <&vcc_io>; -}; - -&pinctrl { - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - usb20_host_drv: usb20-host-drv { - rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy { - status = "okay"; -}; - -&u2phy_host { - status = "okay"; -}; - -&u2phy_otg { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb20_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbdrd3 { - dr_mode = "host"; - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; }; -&usb_host0_ohci { - status = "okay"; +&rk805 { + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; }; -&vop { - status = "okay"; +&vcc_host1_5v { + gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; }; -&vop_mmu { - status = "okay"; +&vcc_sdio { + gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts index e3e3984d01d4..329d03172433 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts @@ -4,8 +4,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> - -#include "rk3328-roc-cc.dts" +#include "rk3328-roc.dtsi" / { model = "Firefly ROC-RK3328-PC"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi new file mode 100644 index 000000000000..116d2a6c4f7d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; + +#include "rk3328.dtsi" + +/ { + aliases { + ethernet0 = &gmac2io; + mmc0 = &sdmmc; + mmc1 = &emmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_pin>; + regulator-boot-on; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + + vcc_sdio: sdmmcio-regulator { + compatible = "regulator-gpio"; + states = <1800000 0x1>, <3300000 0x0>; + regulator-name = "vcc_sdio"; + regulator-type = "voltage"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&usb20_host_drv>; + regulator-name = "vcc_host1_5v"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + power_led: led-0 { + label = "firefly:blue:power"; + linux,default-trigger = "heartbeat"; + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + user_led: led-1 { + label = "firefly:yellow:user"; + linux,default-trigger = "mmc1"; + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&analog_sound { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <150000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; + tx_delay = <0x24>; + rx_delay = <0x18>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_sdio>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + usb20_host_drv: usb20-host-drv { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts index 60358ab8c7df..e091b20c2d1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts @@ -10,57 +10,14 @@ */ /dts-v1/; -#include "rk3399-nanopi4.dtsi" + +#include "rk3399-nanopi-m4.dtsi" / { model = "FriendlyElec NanoPi M4"; compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399"; - - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - }; - - vcc5v0_core: vcc5v0-core { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_core"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_5v>; - }; - - vcc5v0_usb1: vcc5v0-usb1 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb1"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb2: vcc5v0-usb2 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb2"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&vcc3v3_sys { - vin-supply = <&vcc5v0_core>; }; &u2phy0_host { phy-supply = <&vcc5v0_usb1>; }; - -&u2phy1_host { - phy-supply = <&vcc5v0_usb2>; -}; - -&vbus_typec { - regulator-always-on; - vin-supply = <&vdd_5v>; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dtsi new file mode 100644 index 000000000000..5cd69ddf9891 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPi M4 board device tree source + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2019 Arm Ltd. + */ + +/dts-v1/; + +#include "rk3399-nanopi4.dtsi" + +/ { + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2: vcc5v0-usb2 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb2"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_usb2>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts index 65cb21837b0c..d03ce6fa5bf6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts @@ -6,7 +6,8 @@ */ /dts-v1/; -#include "rk3399-nanopi-m4.dts" + +#include "rk3399-nanopi-m4.dtsi" / { model = "FriendlyElec NanoPi M4B"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts index a23d11ca0eb6..b76f98962076 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts @@ -1,7 +1,8 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; -#include "rk3399-nanopi-r4s.dts" + +#include "rk3399-nanopi-r4s.dtsi" / { model = "FriendlyElec NanoPi R4S Enterprise Edition"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts index fe5b52610010..ec3883f6221e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts @@ -1,133 +1,13 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * FriendlyElec NanoPC-T4 board device tree source - * * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd. - * (http://www.friendlyarm.com) - * - * Copyright (c) 2018 Collabora Ltd. - * - * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com> - * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com> - * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com> */ /dts-v1/; -#include "rk3399-nanopi4.dtsi" + +#include "rk3399-nanopi-r4s.dtsi" / { model = "FriendlyElec NanoPi R4S"; compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399"; - - /delete-node/ display-subsystem; - - gpio-leds { - pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; - - /delete-node/ led-0; - - lan_led: led-lan { - gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; - label = "green:lan"; - }; - - sys_led: led-sys { - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - label = "red:power"; - default-state = "on"; - }; - - wan_led: led-wan { - gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - label = "green:wan"; - }; - }; - - gpio-keys { - pinctrl-0 = <&reset_button_pin>; - - /delete-node/ key-power; - - key-reset { - debounce-interval = <50>; - gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; - label = "reset"; - linux,code = <KEY_RESTART>; - }; - }; - - vdd_5v: vdd-5v { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&emmc_phy { - status = "disabled"; -}; - -&i2c4 { - status = "disabled"; -}; - -&pcie0 { - max-link-speed = <1>; - num-lanes = <1>; - vpcie3v3-supply = <&vcc3v3_sys>; -}; - -&pinctrl { - gpio-leds { - /delete-node/ status-led-pin; - - lan_led_pin: lan-led-pin { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - sys_led_pin: sys-led-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - rockchip-key { - /delete-node/ power-key; - - reset_button_pin: reset-button-pin { - rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&sdhci { - status = "disabled"; -}; - -&sdio0 { - status = "disabled"; -}; - -&u2phy0_host { - phy-supply = <&vdd_5v>; -}; - -&u2phy1_host { - status = "disabled"; -}; - -&uart0 { - status = "disabled"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -&vcc3v3_sys { - vin-supply = <&vcc5v0_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi new file mode 100644 index 000000000000..f5f8b9c7c166 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPC-R4 board device tree source + * + * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * + * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com> + * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com> + * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; + +#include "rk3399-nanopi4.dtsi" + +/ { + /delete-node/ display-subsystem; + + gpio-leds { + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; + + /delete-node/ led-0; + + lan_led: led-lan { + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + label = "green:lan"; + }; + + sys_led: led-sys { + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + label = "red:power"; + default-state = "on"; + }; + + wan_led: led-wan { + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + label = "green:wan"; + }; + }; + + gpio-keys { + pinctrl-0 = <&reset_button_pin>; + + /delete-node/ key-power; + + key-reset { + debounce-interval = <50>; + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + }; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emmc_phy { + status = "disabled"; +}; + +&i2c4 { + status = "disabled"; +}; + +&pcie0 { + max-link-speed = <1>; + num-lanes = <1>; + vpcie3v3-supply = <&vcc3v3_sys>; +}; + +&pinctrl { + gpio-leds { + /delete-node/ status-led-pin; + + lan_led_pin: lan-led-pin { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rockchip-key { + /delete-node/ power-key; + + reset_button_pin: reset-button-pin { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdhci { + status = "disabled"; +}; + +&sdio0 { + status = "disabled"; +}; + +&u2phy0_host { + phy-supply = <&vdd_5v>; +}; + +&u2phy1_host { + status = "disabled"; +}; + +&uart0 { + status = "disabled"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_sys>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi new file mode 100644 index 000000000000..eef4851844bc --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi @@ -0,0 +1,760 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "rk3588s.dtsi" + +/ { + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Maskrom"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1800>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key1_pin>; + + button-user { + label = "User"; + linux,code = <BTN_1>; + gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; + debounce-interval = <50>; + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_led: led-0 { + label = "sys_led"; + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>; + }; + + wan_led: led-1 { + label = "wan_led"; + gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wan_led_pin>; + }; + + lan1_led: led-2 { + label = "lan1_led"; + gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lan1_led_pin>; + }; + + lan2_led: led-3 { + gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lan2_led_pin>; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_3v3_s0: vcc-3v3-s0-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwr>; + regulator-name = "vcc_3v3_sd_s0"; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_pcie20: vcc3v3-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_pcie20"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vcc5v0_usb_otg0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_host_20: vcc5v0-host-20-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host20_en>; + regulator-name = "vcc5v0_host_20"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + pinctrl-names = "default"; + tx_delay = <0x42>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6m0_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l1 { + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + status = "okay"; +}; + +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + status = "okay"; +}; + +&pinctrl { + gpio-key { + key1_pin: key1-pin { + rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + sys_led_pin: sys-led-pin { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan1_led_pin: lan1-led-pin { + rockchip,pins = + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan2_led_pin: lan2-led-pin { + rockchip,pins = + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host20_en: vcc5v0-host20-en { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211f { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + avdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "avdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "avdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host_20>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts index 497bbb57071f..ccc5e4627517 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts @@ -2,7 +2,7 @@ /dts-v1/; -#include "rk3588s-nanopi-r6s.dts" +#include "rk3588s-nanopi-r6.dtsi" / { model = "FriendlyElec NanoPi R6C"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts index 4fa644ae510c..9c3e0b0daaac 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts @@ -2,763 +2,13 @@ /dts-v1/; -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "rk3588s.dtsi" +#include "rk3588s-nanopi-r6.dtsi" / { model = "FriendlyElec NanoPi R6S"; compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s"; - - aliases { - ethernet0 = &gmac1; - mmc0 = &sdmmc; - mmc1 = &sdhci; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-maskrom { - label = "Maskrom"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <1800>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key1_pin>; - - button-user { - label = "User"; - linux,code = <BTN_1>; - gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; - debounce-interval = <50>; - }; - }; - - leds { - compatible = "gpio-leds"; - - sys_led: led-0 { - label = "sys_led"; - gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&sys_led_pin>; - }; - - wan_led: led-1 { - label = "wan_led"; - gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&wan_led_pin>; - }; - - lan1_led: led-2 { - label = "lan1_led"; - gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lan1_led_pin>; - }; - - lan2_led: led-3 { - label = "lan2_led"; - gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lan2_led_pin>; - }; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_1v1_nldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc_3v3_s0: vcc-3v3-s0-regulator { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3_s0"; - vin-supply = <&vcc_3v3_s3>; - }; - - vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&sd_s0_pwr>; - regulator-name = "vcc_3v3_sd_s0"; - regulator-boot-on; - regulator-max-microvolt = <3000000>; - regulator-min-microvolt = <3000000>; - vin-supply = <&vcc_3v3_s3>; - }; - - vcc_3v3_pcie20: vcc3v3-pcie20-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_pcie20"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3_s3>; - }; - - vcc5v0_usb: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&typec5v_pwren>; - regulator-name = "vcc5v0_usb_otg0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_host_20: vcc5v0-host-20-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host20_en>; - regulator-name = "vcc5v0_host_20"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; -}; - -&combphy0_ps { - status = "okay"; -}; - -&combphy2_psu { - status = "okay"; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&gmac1 { - clock_in_out = "output"; - phy-handle = <&rgmii_phy1>; - phy-mode = "rgmii-rxid"; - pinctrl-0 = <&gmac1_miim - &gmac1_tx_bus2 - &gmac1_rx_bus2 - &gmac1_rgmii_clk - &gmac1_rgmii_bus>; - pinctrl-names = "default"; - tx_delay = <0x42>; - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0m2_xfer>; - status = "okay"; - - vdd_cpu_big0_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big0_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_big1_s0: regulator@43 { - compatible = "rockchip,rk8603", "rockchip,rk8602"; - reg = <0x43>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big1_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c2 { - status = "okay"; - - vdd_npu_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_npu_s0"; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <2300>; - regulator-boot-on; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c6 { - clock-frequency = <200000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6m0_xfer>; - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&rtc_int>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - wakeup-source; - }; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-id001c.c916"; - reg = <0x1>; - pinctrl-names = "default"; - pinctrl-0 = <&rtl8211f_rst>; - reset-assert-us = <20000>; - reset-deassert-us = <100000>; - reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - }; -}; - -&pcie2x1l1 { - reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc_3v3_pcie20>; - status = "okay"; -}; - -&pcie2x1l2 { - reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc_3v3_pcie20>; - status = "okay"; -}; - -&pinctrl { - gpio-key { - key1_pin: key1-pin { - rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - gpio-leds { - sys_led_pin: sys-led-pin { - rockchip,pins = - <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wan_led_pin: wan-led-pin { - rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - lan1_led_pin: lan1-led-pin { - rockchip,pins = - <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - lan2_led_pin: lan2-led-pin { - rockchip,pins = - <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - hym8563 { - rtc_int: rtc-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdmmc { - sd_s0_pwr: sd-s0-pwr { - rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - typec5v_pwren: typec5v-pwren { - rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_host20_en: vcc5v0-host20-en { - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - rtl8211f { - rtl8211f_rst: rtl8211f-rst { - rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&saradc { - vref-supply = <&avcc_1v8_s0>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - mmc-hs200-1_8v; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - disable-wp; - max-frequency = <150000000>; - no-mmc; - no-sdio; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_sd_s0>; - vqmmc-supply = <&vccio_sd_s0>; - status = "okay"; -}; - -&spi2 { - status = "okay"; - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - num-cs = <1>; - - pmic@0 { - compatible = "rockchip,rk806"; - spi-max-frequency = <1000000>; - reg = <0x0>; - - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - - system-power-controller; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc5v0_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc5v0_sys>; - vcc13-supply = <&vcc_1v1_nldo_s3>; - vcc14-supply = <&vcc_1v1_nldo_s3>; - vcca-supply = <&vcc5v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl1"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_gpu_s0"; - regulator-enable-ramp-delay = <400>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_cpu_lit_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <750000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_log_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_vdenc_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vdd2_ddr_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_2v0_pldo_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vddq_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "avcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_1v8_s0: pldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "avdd_1v2_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - avcc_3v3_s0: pldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "avcc_3v3_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vccio_sd_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "pldo6_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - avdd_ddr_pll_s0: nldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "avdd_ddr_pll_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "avdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - avdd_0v85_s0: nldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "avdd_0v85_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy2 { - status = "okay"; -}; - -&u2phy2_host { - phy-supply = <&vcc5v0_host_20>; - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; }; -&usb_host0_ohci { - status = "okay"; +&lan2_led { + label = "lan2_led"; }; |