diff options
author | David Brownell <dbrownell@users.sourceforge.net> | 2008-06-19 17:52:07 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2008-07-21 15:15:59 -0700 |
commit | a7707adf9ee8de3c5b67e3793b98888f551ad00d (patch) | |
tree | 431137e4c39202f6395f64893966e3bdfa1349d2 | |
parent | c1dca562be8ada614ef193aa246c6f8705bcd6b9 (diff) | |
download | lwn-a7707adf9ee8de3c5b67e3793b98888f551ad00d.tar.gz lwn-a7707adf9ee8de3c5b67e3793b98888f551ad00d.zip |
usb gadget: use new serial core
Teach "gadget serial" to use the new abstracted (and bugfixed) TTY glue,
and remove all the orignal tangled-up code. Update the documentation
accordingly. This is a net object code shrink and cleanup; it should
make it a lot easier to see how the TTY glue should accomodate updates
to the TTY layer, be bugfixed, etc.
Notable behavior changes include: it can now support getty even when
there's no USB connection; it fits properly into the mdev/udev world;
and RX handling is better (throttling works, and low latency).
Configurations with scripts setting up the /dev/ttygserial device node
(with "experimental" major number) may want to change that to be a
symlink pointing to the /dev/ttyGS0 file, as a migration aid; else,
just switch entirely over to mdev/udev.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r-- | Documentation/usb/gadget_serial.txt | 35 | ||||
-rw-r--r-- | drivers/usb/gadget/Makefile | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/serial.c | 1392 |
3 files changed, 103 insertions, 1326 deletions
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt index 815f5c2301ff..9b22bd14c348 100644 --- a/Documentation/usb/gadget_serial.txt +++ b/Documentation/usb/gadget_serial.txt @@ -1,6 +1,7 @@ Linux Gadget Serial Driver v2.0 11/20/2004 + (updated 8-May-2008 for v2.3) License and Disclaimer @@ -31,7 +32,7 @@ Prerequisites ------------- Versions of the gadget serial driver are available for the 2.4 Linux kernels, but this document assumes you are using -version 2.0 or later of the gadget serial driver in a 2.6 +version 2.3 or later of the gadget serial driver in a 2.6 Linux kernel. This document assumes that you are familiar with Linux and @@ -40,6 +41,12 @@ standard utilities, use minicom and HyperTerminal, and work with USB and serial devices. It also assumes you configure the Linux gadget and usb drivers as modules. +With version 2.3 of the driver, major and minor device nodes are +no longer statically defined. Your Linux based system should mount +sysfs in /sys, and use "mdev" (in Busybox) or "udev" to make the +/dev nodes matching the sysfs /sys/class/tty files. + + Overview -------- @@ -104,15 +111,8 @@ driver. All this are listed under "USB Gadget Support" when configuring the kernel. Then rebuild and install the kernel or modules. -The gadget serial driver uses major number 127, for now. So you -will need to create a device node for it, like this: - - mknod /dev/ttygserial c 127 0 - -You only need to do this once. - Then you must load the gadget serial driver. To load it as an -ACM device, do this: +ACM device (recommended for interoperability), do this: modprobe g_serial use_acm=1 @@ -125,6 +125,23 @@ controller driver. This must be done each time you reboot the gadget side Linux system. You can add this to the start up scripts, if desired. +Your system should use mdev (from busybox) or udev to make the +device nodes. After this gadget driver has been set up you should +then see a /dev/ttyGS0 node: + + # ls -l /dev/ttyGS0 | cat + crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0 + # + +Note that the major number (253, above) is system-specific. If +you need to create /dev nodes by hand, the right numbers to use +will be in the /sys/class/tty/ttyGS0/dev file. + +When you link this gadget driver early, perhaps even statically, +you may want to set up an /etc/inittab entry to run "getty" on it. +The /dev/ttyGS0 line should work like most any other serial port. + + If gadget serial is loaded as an ACM device you will want to use either the Windows or Linux ACM driver on the host side. If gadget serial is loaded as a bulk in/out device, you will want to use the diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index e258afd25faf..16211435761f 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_USB_M66592) += m66592-udc.o # g_zero-objs := zero.o usbstring.o config.o epautoconf.o g_ether-objs := ether.o usbstring.o config.o epautoconf.o -g_serial-objs := serial.o usbstring.o config.o epautoconf.o +g_serial-objs := serial.o u_serial.o usbstring.o config.o epautoconf.o g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o gadgetfs-objs := inode.o g_file_storage-objs := file_storage.o usbstring.o config.o \ diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index fa019fa73334..64ce7e00e98a 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -1,15 +1,8 @@ /* - * g_serial.c -- USB gadget serial driver + * serial.c -- USB gadget serial driver * - * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com) - * - * This code is based in part on the Gadget Zero driver, which - * is Copyright (C) 2003 by David Brownell, all rights reserved. - * - * This code also borrows from usbserial.c, which is - * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2000 Peter Berger (pberger@brimson.com) - * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2008 by David Brownell * * This software is distributed under the terms of the GNU General * Public License ("GPL") as published by the Free Software Foundation, @@ -22,23 +15,20 @@ #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/usb/ch9.h> -#include <linux/usb/cdc.h> -#include <linux/usb/gadget.h> - +#include "u_serial.h" #include "gadget_chips.h" /* Defines */ -#define GS_VERSION_STR "v2.2" -#define GS_VERSION_NUM 0x2200 +#define GS_VERSION_STR "v2.3" +#define GS_VERSION_NUM 0x2300 #define GS_LONG_NAME "Gadget Serial" #define GS_SHORT_NAME "g_serial" -#define GS_MAJOR 127 -#define GS_MINOR_START 0 +#define GS_VERSION_NAME GS_LONG_NAME " " GS_VERSION_STR + /* REVISIT only one port is supported for now; * see gs_{send,recv}_packet() ... no multiplexing, @@ -58,23 +48,8 @@ #define GS_MAX_DESC_LEN 256 -#define GS_DEFAULT_READ_Q_SIZE 32 -#define GS_DEFAULT_WRITE_Q_SIZE 32 - -#define GS_DEFAULT_WRITE_BUF_SIZE 8192 -#define GS_TMP_BUF_SIZE 8192 - -#define GS_CLOSE_TIMEOUT 15 - #define GS_DEFAULT_USE_ACM 0 -/* 9600-8-N-1 ... matches init_termios.c_cflag and defaults - * expected by "usbser.sys" on MS-Windows. - */ -#define GS_DEFAULT_DTE_RATE 9600 -#define GS_DEFAULT_DATA_BITS 8 -#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY -#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS /* maxpacket and other transfer characteristics vary by speed. */ static inline struct usb_endpoint_descriptor * @@ -87,19 +62,6 @@ choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, } -/* debug settings */ -#ifdef DEBUG -static int debug = 1; -#else -#define debug 0 -#endif - -#define gs_debug(format, arg...) \ - do { if (debug) pr_debug(format, ## arg); } while (0) -#define gs_debug_level(level, format, arg...) \ - do { if (debug >= level) pr_debug(format, ## arg); } while (0) - - /* Thanks to NetChip Technologies for donating this product ID. * * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! @@ -112,63 +74,19 @@ static int debug = 1; #define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ #define GS_NOTIFY_MAXPACKET 8 - -/* circular buffer */ -struct gs_buf { - unsigned int buf_size; - char *buf_buf; - char *buf_get; - char *buf_put; -}; - -/* the port structure holds info for each port, one for each minor number */ -struct gs_port { - struct gs_dev *port_dev; /* pointer to device struct */ - struct tty_struct *port_tty; /* pointer to tty struct */ - spinlock_t port_lock; - int port_num; - int port_open_count; - int port_in_use; /* open/close in progress */ - wait_queue_head_t port_write_wait;/* waiting to write */ - struct gs_buf *port_write_buf; - struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ - u16 port_handshake_bits; -#define RS232_RTS (1 << 1) -#define RS232_DTE (1 << 0) -}; - /* the device structure holds info for the USB device */ struct gs_dev { struct usb_gadget *dev_gadget; /* gadget device pointer */ spinlock_t dev_lock; /* lock for set/reset config */ int dev_config; /* configuration number */ - struct usb_ep *dev_notify_ep; /* address of notify endpoint */ - struct usb_ep *dev_in_ep; /* address of in endpoint */ - struct usb_ep *dev_out_ep; /* address of out endpoint */ - struct usb_endpoint_descriptor /* descriptor of notify ep */ - *dev_notify_ep_desc; - struct usb_endpoint_descriptor /* descriptor of in endpoint */ - *dev_in_ep_desc; - struct usb_endpoint_descriptor /* descriptor of out endpoint */ - *dev_out_ep_desc; struct usb_request *dev_ctrl_req; /* control request */ - struct list_head dev_req_list; /* list of write requests */ - int dev_sched_port; /* round robin port scheduled */ - struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */ + + struct gserial gser; /* serial/tty port */ }; /* Functions */ -/* tty driver internals */ -static int gs_send(struct gs_dev *dev); -static int gs_send_packet(struct gs_dev *dev, char *packet, - unsigned int size); -static int gs_recv_packet(struct gs_dev *dev, char *packet, - unsigned int size); -static void gs_read_complete(struct usb_ep *ep, struct usb_request *req); -static void gs_write_complete(struct usb_ep *ep, struct usb_request *req); - /* gadget driver internals */ static int gs_set_config(struct gs_dev *dev, unsigned config); static void gs_reset_config(struct gs_dev *dev); @@ -179,28 +97,6 @@ static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags); static void gs_free_req(struct usb_ep *ep, struct usb_request *req); -static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags); -static void gs_free_ports(struct gs_dev *dev); - -/* circular buffer */ -static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags); -static void gs_buf_free(struct gs_buf *gb); -static void gs_buf_clear(struct gs_buf *gb); -static unsigned int gs_buf_data_avail(struct gs_buf *gb); -static unsigned int gs_buf_space_avail(struct gs_buf *gb); -static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, - unsigned int count); -static unsigned int gs_buf_get(struct gs_buf *gb, char *buf, - unsigned int count); - - -/* Globals */ - -static struct gs_dev *gs_device; - -static struct mutex gs_open_close_lock[GS_NUM_PORTS]; - - /*-------------------------------------------------------------------------*/ /* USB descriptors */ @@ -217,7 +113,7 @@ static struct mutex gs_open_close_lock[GS_NUM_PORTS]; static char manufacturer[50]; static struct usb_string gs_strings[] = { { GS_MANUFACTURER_STR_ID, manufacturer }, - { GS_PRODUCT_STR_ID, GS_LONG_NAME }, + { GS_PRODUCT_STR_ID, GS_VERSION_NAME }, { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" }, { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" }, { GS_CONTROL_STR_ID, "Gadget Serial Control" }, @@ -436,761 +332,17 @@ static const struct usb_descriptor_header *gs_acm_highspeed_function[] = { /*-------------------------------------------------------------------------*/ /* Module */ -MODULE_DESCRIPTION(GS_LONG_NAME); +MODULE_DESCRIPTION(GS_VERSION_NAME); MODULE_AUTHOR("Al Borchers"); +MODULE_AUTHOR("David Brownell"); MODULE_LICENSE("GPL"); -#ifdef DEBUG -module_param(debug, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on"); -#endif - -static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE; -module_param(read_q_size, uint, S_IRUGO); -MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32"); - -static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE; -module_param(write_q_size, uint, S_IRUGO); -MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32"); - -static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE; -module_param(write_buf_size, uint, S_IRUGO); -MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192"); - static unsigned int use_acm = GS_DEFAULT_USE_ACM; module_param(use_acm, uint, S_IRUGO); MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no"); /*-------------------------------------------------------------------------*/ -/* TTY Driver */ - -/* - * gs_open - */ -static int gs_open(struct tty_struct *tty, struct file *file) -{ - int port_num; - unsigned long flags; - struct gs_port *port; - struct gs_dev *dev; - struct gs_buf *buf; - struct mutex *mtx; - int ret; - - port_num = tty->index; - - gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file); - - if (port_num < 0 || port_num >= GS_NUM_PORTS) { - pr_err("gs_open: (%d,%p,%p) invalid port number\n", - port_num, tty, file); - return -ENODEV; - } - - dev = gs_device; - - if (dev == NULL) { - pr_err("gs_open: (%d,%p,%p) NULL device pointer\n", - port_num, tty, file); - return -ENODEV; - } - - mtx = &gs_open_close_lock[port_num]; - if (mutex_lock_interruptible(mtx)) { - pr_err("gs_open: (%d,%p,%p) interrupted waiting for mutex\n", - port_num, tty, file); - return -ERESTARTSYS; - } - - spin_lock_irqsave(&dev->dev_lock, flags); - - if (dev->dev_config == GS_NO_CONFIG_ID) { - pr_err("gs_open: (%d,%p,%p) device is not connected\n", - port_num, tty, file); - ret = -ENODEV; - goto exit_unlock_dev; - } - - port = dev->dev_port[port_num]; - - if (port == NULL) { - pr_err("gs_open: (%d,%p,%p) NULL port pointer\n", - port_num, tty, file); - ret = -ENODEV; - goto exit_unlock_dev; - } - - spin_lock(&port->port_lock); - spin_unlock(&dev->dev_lock); - - if (port->port_dev == NULL) { - pr_err("gs_open: (%d,%p,%p) port disconnected (1)\n", - port_num, tty, file); - ret = -EIO; - goto exit_unlock_port; - } - - if (port->port_open_count > 0) { - ++port->port_open_count; - gs_debug("gs_open: (%d,%p,%p) already open\n", - port_num, tty, file); - ret = 0; - goto exit_unlock_port; - } - - tty->driver_data = NULL; - - /* mark port as in use, we can drop port lock and sleep if necessary */ - port->port_in_use = 1; - - /* allocate write buffer on first open */ - if (port->port_write_buf == NULL) { - spin_unlock_irqrestore(&port->port_lock, flags); - buf = gs_buf_alloc(write_buf_size, GFP_KERNEL); - spin_lock_irqsave(&port->port_lock, flags); - - /* might have been disconnected while asleep, check */ - if (port->port_dev == NULL) { - pr_err("gs_open: (%d,%p,%p) port disconnected (2)\n", - port_num, tty, file); - port->port_in_use = 0; - ret = -EIO; - goto exit_unlock_port; - } - - if ((port->port_write_buf=buf) == NULL) { - pr_err("gs_open: (%d,%p,%p) cannot allocate " - "port write buffer\n", - port_num, tty, file); - port->port_in_use = 0; - ret = -ENOMEM; - goto exit_unlock_port; - } - - } - - /* wait for carrier detect (not implemented) */ - - /* might have been disconnected while asleep, check */ - if (port->port_dev == NULL) { - pr_err("gs_open: (%d,%p,%p) port disconnected (3)\n", - port_num, tty, file); - port->port_in_use = 0; - ret = -EIO; - goto exit_unlock_port; - } - - tty->driver_data = port; - port->port_tty = tty; - port->port_open_count = 1; - port->port_in_use = 0; - - gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file); - - ret = 0; - -exit_unlock_port: - spin_unlock_irqrestore(&port->port_lock, flags); - mutex_unlock(mtx); - return ret; - -exit_unlock_dev: - spin_unlock_irqrestore(&dev->dev_lock, flags); - mutex_unlock(mtx); - return ret; - -} - -/* - * gs_close - */ - -static int gs_write_finished_event_safely(struct gs_port *p) -{ - int cond; - - spin_lock_irq(&(p)->port_lock); - cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); - spin_unlock_irq(&(p)->port_lock); - return cond; -} - -static void gs_close(struct tty_struct *tty, struct file *file) -{ - struct gs_port *port = tty->driver_data; - struct mutex *mtx; - - if (port == NULL) { - pr_err("gs_close: NULL port pointer\n"); - return; - } - - gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file); - - mtx = &gs_open_close_lock[port->port_num]; - mutex_lock(mtx); - - spin_lock_irq(&port->port_lock); - - if (port->port_open_count == 0) { - pr_err("gs_close: (%d,%p,%p) port is already closed\n", - port->port_num, tty, file); - goto exit; - } - - if (port->port_open_count > 1) { - --port->port_open_count; - goto exit; - } - - /* free disconnected port on final close */ - if (port->port_dev == NULL) { - kfree(port); - goto exit; - } - - /* mark port as closed but in use, we can drop port lock */ - /* and sleep if necessary */ - port->port_in_use = 1; - port->port_open_count = 0; - - /* wait for write buffer to drain, or */ - /* at most GS_CLOSE_TIMEOUT seconds */ - if (gs_buf_data_avail(port->port_write_buf) > 0) { - spin_unlock_irq(&port->port_lock); - wait_event_interruptible_timeout(port->port_write_wait, - gs_write_finished_event_safely(port), - GS_CLOSE_TIMEOUT * HZ); - spin_lock_irq(&port->port_lock); - } - - /* free disconnected port on final close */ - /* (might have happened during the above sleep) */ - if (port->port_dev == NULL) { - kfree(port); - goto exit; - } - - gs_buf_clear(port->port_write_buf); - - tty->driver_data = NULL; - port->port_tty = NULL; - port->port_in_use = 0; - - gs_debug("gs_close: (%d,%p,%p) completed\n", - port->port_num, tty, file); - -exit: - spin_unlock_irq(&port->port_lock); - mutex_unlock(mtx); -} - -/* - * gs_write - */ -static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - unsigned long flags; - struct gs_port *port = tty->driver_data; - int ret; - - if (port == NULL) { - pr_err("gs_write: NULL port pointer\n"); - return -EIO; - } - - gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty, - count); - - if (count == 0) - return 0; - - spin_lock_irqsave(&port->port_lock, flags); - - if (port->port_dev == NULL) { - pr_err("gs_write: (%d,%p) port is not connected\n", - port->port_num, tty); - ret = -EIO; - goto exit; - } - - if (port->port_open_count == 0) { - pr_err("gs_write: (%d,%p) port is closed\n", - port->port_num, tty); - ret = -EBADF; - goto exit; - } - - count = gs_buf_put(port->port_write_buf, buf, count); - - spin_unlock_irqrestore(&port->port_lock, flags); - - gs_send(gs_device); - - gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty, - count); - - return count; - -exit: - spin_unlock_irqrestore(&port->port_lock, flags); - return ret; -} - -/* - * gs_put_char - */ -static int gs_put_char(struct tty_struct *tty, unsigned char ch) -{ - unsigned long flags; - struct gs_port *port = tty->driver_data; - int ret = 0; - - if (port == NULL) { - pr_err("gs_put_char: NULL port pointer\n"); - return 0; - } - - gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p\n", - port->port_num, tty, ch, __builtin_return_address(0)); - - spin_lock_irqsave(&port->port_lock, flags); - - if (port->port_dev == NULL) { - pr_err("gs_put_char: (%d,%p) port is not connected\n", - port->port_num, tty); - goto exit; - } - - if (port->port_open_count == 0) { - pr_err("gs_put_char: (%d,%p) port is closed\n", - port->port_num, tty); - goto exit; - } - - ret = gs_buf_put(port->port_write_buf, &ch, 1); - -exit: - spin_unlock_irqrestore(&port->port_lock, flags); - return ret; -} - -/* - * gs_flush_chars - */ -static void gs_flush_chars(struct tty_struct *tty) -{ - unsigned long flags; - struct gs_port *port = tty->driver_data; - - if (port == NULL) { - pr_err("gs_flush_chars: NULL port pointer\n"); - return; - } - - gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); - - spin_lock_irqsave(&port->port_lock, flags); - - if (port->port_dev == NULL) { - pr_err("gs_flush_chars: (%d,%p) port is not connected\n", - port->port_num, tty); - goto exit; - } - - if (port->port_open_count == 0) { - pr_err("gs_flush_chars: (%d,%p) port is closed\n", - port->port_num, tty); - goto exit; - } - - spin_unlock_irqrestore(&port->port_lock, flags); - - gs_send(gs_device); - - return; - -exit: - spin_unlock_irqrestore(&port->port_lock, flags); -} - -/* - * gs_write_room - */ -static int gs_write_room(struct tty_struct *tty) -{ - - int room = 0; - unsigned long flags; - struct gs_port *port = tty->driver_data; - - - if (port == NULL) - return 0; - - spin_lock_irqsave(&port->port_lock, flags); - - if (port->port_dev != NULL && port->port_open_count > 0 - && port->port_write_buf != NULL) - room = gs_buf_space_avail(port->port_write_buf); - - spin_unlock_irqrestore(&port->port_lock, flags); - - gs_debug("gs_write_room: (%d,%p) room=%d\n", - port->port_num, tty, room); - - return room; -} - -/* - * gs_chars_in_buffer - */ -static int gs_chars_in_buffer(struct tty_struct *tty) -{ - int chars = 0; - unsigned long flags; - struct gs_port *port = tty->driver_data; - - if (port == NULL) - return 0; - - spin_lock_irqsave(&port->port_lock, flags); - - if (port->port_dev != NULL && port->port_open_count > 0 - && port->port_write_buf != NULL) - chars = gs_buf_data_avail(port->port_write_buf); - - spin_unlock_irqrestore(&port->port_lock, flags); - - gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n", - port->port_num, tty, chars); - - return chars; -} - -/* - * gs_throttle - */ -static void gs_throttle(struct tty_struct *tty) -{ -} - -/* - * gs_unthrottle - */ -static void gs_unthrottle(struct tty_struct *tty) -{ -} - -/* - * gs_break - */ -static void gs_break(struct tty_struct *tty, int break_state) -{ -} - -/* - * gs_ioctl - */ -static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) -{ - struct gs_port *port = tty->driver_data; - - if (port == NULL) { - pr_err("gs_ioctl: NULL port pointer\n"); - return -EIO; - } - - gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n", - port->port_num, tty, file, cmd, arg); - - /* handle ioctls */ - - /* could not handle ioctl */ - return -ENOIOCTLCMD; -} - -/* - * gs_set_termios - */ -static void gs_set_termios(struct tty_struct *tty, struct ktermios *old) -{ -} - -static const struct tty_operations gs_tty_ops = { - .open = gs_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .ioctl = gs_ioctl, - .set_termios = gs_set_termios, - .throttle = gs_throttle, - .unthrottle = gs_unthrottle, - .break_ctl = gs_break, - .chars_in_buffer = gs_chars_in_buffer, -}; - -/*-------------------------------------------------------------------------*/ - -/* -* gs_send -* -* This function finds available write requests, calls -* gs_send_packet to fill these packets with data, and -* continues until either there are no more write requests -* available or no more data to send. This function is -* run whenever data arrives or write requests are available. -*/ -static int gs_send(struct gs_dev *dev) -{ - int ret,len; - unsigned long flags; - struct usb_ep *ep; - struct usb_request *req; - - if (dev == NULL) { - pr_err("gs_send: NULL device pointer\n"); - return -ENODEV; - } - - spin_lock_irqsave(&dev->dev_lock, flags); - - ep = dev->dev_in_ep; - - while(!list_empty(&dev->dev_req_list)) { - - req = list_entry(dev->dev_req_list.next, - struct usb_request, list); - - len = gs_send_packet(dev, req->buf, ep->maxpacket); - - if (len > 0) { - gs_debug_level(3, "gs_send: len=%d, 0x%2.2x " - "0x%2.2x 0x%2.2x ...\n", len, - *((unsigned char *)req->buf), - *((unsigned char *)req->buf+1), - *((unsigned char *)req->buf+2)); - list_del(&req->list); - req->length = len; - spin_unlock_irqrestore(&dev->dev_lock, flags); - if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { - pr_err( - "gs_send: cannot queue read request, ret=%d\n", - ret); - spin_lock_irqsave(&dev->dev_lock, flags); - break; - } - spin_lock_irqsave(&dev->dev_lock, flags); - } else { - break; - } - - } - - spin_unlock_irqrestore(&dev->dev_lock, flags); - - return 0; -} - -/* - * gs_send_packet - * - * If there is data to send, a packet is built in the given - * buffer and the size is returned. If there is no data to - * send, 0 is returned. If there is any error a negative - * error number is returned. - * - * Called during USB completion routine, on interrupt time. - * - * We assume that disconnect will not happen until all completion - * routines have completed, so we can assume that the dev_port - * array does not change during the lifetime of this function. - */ -static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size) -{ - unsigned int len; - struct gs_port *port; - - /* TEMPORARY -- only port 0 is supported right now */ - port = dev->dev_port[0]; - - if (port == NULL) { - pr_err("gs_send_packet: port=%d, NULL port pointer\n", 0); - return -EIO; - } - - spin_lock(&port->port_lock); - - len = gs_buf_data_avail(port->port_write_buf); - if (len < size) - size = len; - - if (size == 0) - goto exit; - - size = gs_buf_get(port->port_write_buf, packet, size); - - if (port->port_tty) - wake_up_interruptible(&port->port_tty->write_wait); - -exit: - spin_unlock(&port->port_lock); - return size; -} - -/* - * gs_recv_packet - * - * Called for each USB packet received. Reads the packet - * header and stuffs the data in the appropriate tty buffer. - * Returns 0 if successful, or a negative error number. - * - * Called during USB completion routine, on interrupt time. - * - * We assume that disconnect will not happen until all completion - * routines have completed, so we can assume that the dev_port - * array does not change during the lifetime of this function. - */ -static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size) -{ - unsigned int len; - struct gs_port *port; - int ret; - struct tty_struct *tty; - - /* TEMPORARY -- only port 0 is supported right now */ - port = dev->dev_port[0]; - - if (port == NULL) { - pr_err("gs_recv_packet: port=%d, NULL port pointer\n", - port->port_num); - return -EIO; - } - - spin_lock(&port->port_lock); - - if (port->port_open_count == 0) { - pr_err("gs_recv_packet: port=%d, port is closed\n", - port->port_num); - ret = -EIO; - goto exit; - } - - - tty = port->port_tty; - - if (tty == NULL) { - pr_err("gs_recv_packet: port=%d, NULL tty pointer\n", - port->port_num); - ret = -EIO; - goto exit; - } - - if (port->port_tty->magic != TTY_MAGIC) { - pr_err("gs_recv_packet: port=%d, bad tty magic\n", - port->port_num); - ret = -EIO; - goto exit; - } - - len = tty_buffer_request_room(tty, size); - if (len > 0) { - tty_insert_flip_string(tty, packet, len); - tty_flip_buffer_push(port->port_tty); - wake_up_interruptible(&port->port_tty->read_wait); - } - ret = 0; -exit: - spin_unlock(&port->port_lock); - return ret; -} - -/* -* gs_read_complete -*/ -static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) -{ - int ret; - struct gs_dev *dev = ep->driver_data; - - if (dev == NULL) { - pr_err("gs_read_complete: NULL device pointer\n"); - return; - } - - switch(req->status) { - case 0: - /* normal completion */ - gs_recv_packet(dev, req->buf, req->actual); -requeue: - req->length = ep->maxpacket; - if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { - pr_err( - "gs_read_complete: cannot queue read request, ret=%d\n", - ret); - } - break; - - case -ESHUTDOWN: - /* disconnect */ - gs_debug("gs_read_complete: shutdown\n"); - gs_free_req(ep, req); - break; - - default: - /* unexpected */ - pr_err( - "gs_read_complete: unexpected status error, status=%d\n", - req->status); - goto requeue; - break; - } -} - -/* -* gs_write_complete -*/ -static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct gs_dev *dev = ep->driver_data; - - if (dev == NULL) { - pr_err("gs_write_complete: NULL device pointer\n"); - return; - } - - switch(req->status) { - case 0: - /* normal completion */ -requeue: - spin_lock(&dev->dev_lock); - list_add(&req->list, &dev->dev_req_list); - spin_unlock(&dev->dev_lock); - - gs_send(dev); - - break; - - case -ESHUTDOWN: - /* disconnect */ - gs_debug("gs_write_complete: shutdown\n"); - gs_free_req(ep, req); - break; - - default: - pr_err( - "gs_write_complete: unexpected status error, status=%d\n", - req->status); - goto requeue; - break; - } -} - -/*-------------------------------------------------------------------------*/ - /* Gadget Driver */ /* @@ -1199,12 +351,10 @@ requeue: * Called on module unload. Frees the control request and device * structure. */ -static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) +static void __exit gs_unbind(struct usb_gadget *gadget) { struct gs_dev *dev = get_gadget_data(gadget); - gs_device = NULL; - /* read/write requests already freed, only control request remains */ if (dev != NULL) { if (dev->dev_ctrl_req != NULL) { @@ -1212,13 +362,13 @@ static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) dev->dev_ctrl_req = NULL; } gs_reset_config(dev); - gs_free_ports(dev); kfree(dev); set_gadget_data(gadget, NULL); } - pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME, - GS_VERSION_STR); + pr_info("gs_unbind: %s unbound\n", GS_VERSION_NAME); + + gserial_cleanup(); } /* @@ -1234,6 +384,10 @@ static int __init gs_bind(struct usb_gadget *gadget) struct gs_dev *dev; int gcnum; + ret = gserial_setup(gadget, GS_NUM_PORTS); + if (ret < 0) + return ret; + /* Some controllers can't support CDC ACM: * - sh doesn't support multiple interfaces or configs; * - sa1100 doesn't have a third interrupt endpoint @@ -1254,21 +408,24 @@ static int __init gs_bind(struct usb_gadget *gadget) } dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL); - if (dev == NULL) - return -ENOMEM; + if (dev == NULL) { + ret = -ENOMEM; + goto autoconf_fail; + } usb_ep_autoconfig_reset(gadget); + ret = -ENXIO; ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc); if (!ep) goto autoconf_fail; - dev->dev_in_ep = ep; + dev->gser.in = ep; ep->driver_data = dev; /* claim the endpoint */ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc); if (!ep) goto autoconf_fail; - dev->dev_out_ep = ep; + dev->gser.out = ep; ep->driver_data = dev; /* claim the endpoint */ if (use_acm) { @@ -1279,7 +436,7 @@ static int __init gs_bind(struct usb_gadget *gadget) } gs_device_desc.idProduct = __constant_cpu_to_le16( GS_CDC_PRODUCT_ID), - dev->dev_notify_ep = ep; + dev->gser.notify = ep; ep->driver_data = dev; /* claim the endpoint */ } @@ -1310,41 +467,32 @@ static int __init gs_bind(struct usb_gadget *gadget) gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - gs_device = dev; - snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); dev->dev_gadget = gadget; spin_lock_init(&dev->dev_lock); - INIT_LIST_HEAD(&dev->dev_req_list); set_gadget_data(gadget, dev); - if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) { - pr_err("gs_bind: cannot allocate ports\n"); - gs_unbind(gadget); - return ret; - } - /* preallocate control response and buffer */ dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN, GFP_KERNEL); if (dev->dev_ctrl_req == NULL) { - gs_unbind(gadget); - return -ENOMEM; + ret = -ENOMEM; + goto autoconf_fail; } gadget->ep0->driver_data = dev; - pr_info("gs_bind: %s %s bound\n", - GS_LONG_NAME, GS_VERSION_STR); + pr_info("gs_bind: %s bound\n", GS_VERSION_NAME); return 0; autoconf_fail: kfree(dev); - pr_err("gs_bind: cannot autoconfigure on %s\n", gadget->name); - return -ENODEV; + gserial_cleanup(); + pr_err("gs_bind: to %s, err %d\n", gadget->name, ret); + return ret; } static int gs_setup_standard(struct usb_gadget *gadget, @@ -1435,15 +583,14 @@ static int gs_setup_standard(struct usb_gadget *gadget, } if (dev->dev_config != GS_BULK_CONFIG_ID && wIndex == GS_CONTROL_INTERFACE_ID) { - if (dev->dev_notify_ep) { - usb_ep_disable(dev->dev_notify_ep); - usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc); + if (dev->gser.notify) { + usb_ep_disable(dev->gser.notify); + usb_ep_enable(dev->gser.notify, + dev->gser.notify_desc); } } else { - usb_ep_disable(dev->dev_in_ep); - usb_ep_disable(dev->dev_out_ep); - usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc); - usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc); + gserial_connect(&dev->gser, 0); + gserial_disconnect(&dev->gser); } ret = 0; set_interface_done: @@ -1480,23 +627,22 @@ static void gs_setup_complete_set_line_coding(struct usb_ep *ep, struct usb_request *req) { struct gs_dev *dev = ep->driver_data; - struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */ switch (req->status) { case 0: /* normal completion */ - if (req->actual != sizeof(port->port_line_coding)) + if (req->actual != sizeof(dev->gser.port_line_coding)) usb_ep_set_halt(ep); - else if (port) { + else { struct usb_cdc_line_coding *value = req->buf; /* REVISIT: we currently just remember this data. * If we change that, (a) validate it first, then * (b) update whatever hardware needs updating. */ - spin_lock(&port->port_lock); - port->port_line_coding = *value; - spin_unlock(&port->port_lock); + spin_lock(&dev->dev_lock); + dev->gser.port_line_coding = *value; + spin_unlock(&dev->dev_lock); } break; @@ -1517,7 +663,6 @@ static int gs_setup_class(struct usb_gadget *gadget, { int ret = -EOPNOTSUPP; struct gs_dev *dev = get_gadget_data(gadget); - struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */ struct usb_request *req = dev->dev_ctrl_req; u16 wIndex = le16_to_cpu(ctrl->wIndex); u16 wValue = le16_to_cpu(ctrl->wValue); @@ -1533,26 +678,22 @@ static int gs_setup_class(struct usb_gadget *gadget, case USB_CDC_REQ_GET_LINE_CODING: ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding)); - if (port) { - spin_lock(&port->port_lock); - memcpy(req->buf, &port->port_line_coding, ret); - spin_unlock(&port->port_lock); - } + spin_lock(&dev->dev_lock); + memcpy(req->buf, &dev->gser.port_line_coding, ret); + spin_unlock(&dev->dev_lock); break; case USB_CDC_REQ_SET_CONTROL_LINE_STATE: if (wLength != 0) break; ret = 0; - if (port) { - /* REVISIT: we currently just remember this data. - * If we change that, update whatever hardware needs - * updating. - */ - spin_lock(&port->port_lock); - port->port_handshake_bits = wValue; - spin_unlock(&port->port_lock); - } + /* REVISIT: we currently just remember this data. + * If we change that, update whatever hardware needs + * updating. + */ + spin_lock(&dev->dev_lock); + dev->gser.port_handshake_bits = wValue; + spin_unlock(&dev->dev_lock); break; default: @@ -1654,17 +795,7 @@ static void gs_disconnect(struct usb_gadget *gadget) struct gs_dev *dev = get_gadget_data(gadget); spin_lock_irqsave(&dev->dev_lock, flags); - gs_reset_config(dev); - - /* free closed ports and disconnect open ports */ - /* (open ports will be freed when closed) */ - gs_free_ports(dev); - - /* re-allocate ports for the next connection */ - if (gs_alloc_ports(dev, GFP_ATOMIC) != 0) - pr_err("gs_disconnect: cannot re-allocate ports\n"); - spin_unlock_irqrestore(&dev->dev_lock, flags); pr_info("gs_disconnect: %s disconnected\n", GS_LONG_NAME); @@ -1698,17 +829,8 @@ static struct usb_gadget_driver gs_gadget_driver = { */ static int gs_set_config(struct gs_dev *dev, unsigned config) { - int i; int ret = 0; struct usb_gadget *gadget = dev->dev_gadget; - struct usb_ep *ep; - struct usb_endpoint_descriptor *out, *in, *notify; - struct usb_request *req; - - if (dev == NULL) { - pr_err("gs_set_config: NULL device pointer\n"); - return 0; - } if (config == dev->dev_config) return 0; @@ -1730,85 +852,37 @@ static int gs_set_config(struct gs_dev *dev, unsigned config) return -EINVAL; } - in = choose_ep_desc(gadget, + dev->gser.in_desc = choose_ep_desc(gadget, &gs_highspeed_in_desc, &gs_fullspeed_in_desc); - out = choose_ep_desc(gadget, + dev->gser.out_desc = choose_ep_desc(gadget, &gs_highspeed_out_desc, &gs_fullspeed_out_desc); - notify = dev->dev_notify_ep + dev->gser.notify_desc = dev->gser.notify ? choose_ep_desc(gadget, &gs_highspeed_notify_desc, &gs_fullspeed_notify_desc) : NULL; - ret = usb_ep_enable(dev->dev_in_ep, in); - if (ret == 0) { - dev->dev_in_ep_desc = in; - } else { - pr_debug("%s: cannot enable %s %s, ret=%d\n", - __func__, "IN", dev->dev_in_ep->name, ret); - return ret; - } - - ret = usb_ep_enable(dev->dev_out_ep, out); - if (ret == 0) { - dev->dev_out_ep_desc = out; - } else { - pr_debug("%s: cannot enable %s %s, ret=%d\n", - __func__, "OUT", dev->dev_out_ep->name, ret); -fail0: - usb_ep_disable(dev->dev_in_ep); - return ret; + /* only support one "serial" port for now */ + if (dev->gser.notify) { + ret = usb_ep_enable(dev->gser.notify, dev->gser.notify_desc); + if (ret < 0) + return ret; + dev->gser.notify->driver_data = dev; } - if (notify) { - ret = usb_ep_enable(dev->dev_notify_ep, notify); - if (ret == 0) { - dev->dev_notify_ep_desc = notify; - } else { - pr_debug("%s: cannot enable %s %s, ret=%d\n", - __func__, "NOTIFY", - dev->dev_notify_ep->name, ret); - usb_ep_disable(dev->dev_out_ep); - goto fail0; + ret = gserial_connect(&dev->gser, 0); + if (ret < 0) { + if (dev->gser.notify) { + usb_ep_disable(dev->gser.notify); + dev->gser.notify->driver_data = NULL; } + return ret; } dev->dev_config = config; - /* allocate and queue read requests */ - ep = dev->dev_out_ep; - for (i=0; i<read_q_size && ret == 0; i++) { - if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) { - req->complete = gs_read_complete; - if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { - pr_err("gs_set_config: cannot queue read " - "request, ret=%d\n", ret); - } - } else { - pr_err("gs_set_config: cannot allocate " - "read requests\n"); - ret = -ENOMEM; - goto exit_reset_config; - } - } - - /* allocate write requests, and put on free list */ - ep = dev->dev_in_ep; - for (i=0; i<write_q_size; i++) { - req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); - if (req) { - req->complete = gs_write_complete; - list_add(&req->list, &dev->dev_req_list); - } else { - pr_err("gs_set_config: cannot allocate " - "write requests\n"); - ret = -ENOMEM; - goto exit_reset_config; - } - } - /* REVISIT the ACM mode should be able to actually *issue* some * notifications, for at least serial state change events if * not also for network connection; say so in bmCapabilities. @@ -1820,10 +894,6 @@ fail0: config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM"); return 0; - -exit_reset_config: - gs_reset_config(dev); - return ret; } /* @@ -1838,32 +908,16 @@ exit_reset_config: */ static void gs_reset_config(struct gs_dev *dev) { - struct usb_request *req; - - if (dev == NULL) { - pr_err("gs_reset_config: NULL device pointer\n"); - return; - } - if (dev->dev_config == GS_NO_CONFIG_ID) return; dev->dev_config = GS_NO_CONFIG_ID; - /* free write requests on the free list */ - while(!list_empty(&dev->dev_req_list)) { - req = list_entry(dev->dev_req_list.next, - struct usb_request, list); - list_del(&req->list); - gs_free_req(dev->dev_in_ep, req); + gserial_disconnect(&dev->gser); + if (dev->gser.notify) { + usb_ep_disable(dev->gser.notify); + dev->gser.notify->driver_data = NULL; } - - /* disable endpoints, forcing completion of pending i/o; */ - /* completion handlers free their requests in this case */ - if (dev->dev_notify_ep) - usb_ep_disable(dev->dev_notify_ep); - usb_ep_disable(dev->dev_in_ep); - usb_ep_disable(dev->dev_out_ep); } /* @@ -1956,254 +1010,8 @@ static void gs_free_req(struct usb_ep *ep, struct usb_request *req) } } -/* - * gs_alloc_ports - * - * Allocate all ports and set the gs_dev struct to point to them. - * Return 0 if successful, or a negative error number. - * - * The device lock is normally held when calling this function. - */ -static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags) -{ - int i; - struct gs_port *port; - - if (dev == NULL) - return -EIO; - - for (i=0; i<GS_NUM_PORTS; i++) { - if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL) - return -ENOMEM; - - port->port_dev = dev; - port->port_num = i; - port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE); - port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT; - port->port_line_coding.bParityType = GS_DEFAULT_PARITY; - port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS; - spin_lock_init(&port->port_lock); - init_waitqueue_head(&port->port_write_wait); - - dev->dev_port[i] = port; - } - - return 0; -} - -/* - * gs_free_ports - * - * Free all closed ports. Open ports are disconnected by - * freeing their write buffers, setting their device pointers - * and the pointers to them in the device to NULL. These - * ports will be freed when closed. - * - * The device lock is normally held when calling this function. - */ -static void gs_free_ports(struct gs_dev *dev) -{ - int i; - unsigned long flags; - struct gs_port *port; - - if (dev == NULL) - return; - - for (i=0; i<GS_NUM_PORTS; i++) { - if ((port=dev->dev_port[i]) != NULL) { - dev->dev_port[i] = NULL; - - spin_lock_irqsave(&port->port_lock, flags); - - if (port->port_write_buf != NULL) { - gs_buf_free(port->port_write_buf); - port->port_write_buf = NULL; - } - - if (port->port_open_count > 0 || port->port_in_use) { - port->port_dev = NULL; - wake_up_interruptible(&port->port_write_wait); - if (port->port_tty) { - tty_hangup(port->port_tty); - } - spin_unlock_irqrestore(&port->port_lock, flags); - } else { - spin_unlock_irqrestore(&port->port_lock, flags); - kfree(port); - } - - } - } -} - -/*-------------------------------------------------------------------------*/ - -/* Circular Buffer */ - -/* - * gs_buf_alloc - * - * Allocate a circular buffer and all associated memory. - */ -static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags) -{ - struct gs_buf *gb; - - if (size == 0) - return NULL; - - gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags); - if (gb == NULL) - return NULL; - - gb->buf_buf = kmalloc(size, kmalloc_flags); - if (gb->buf_buf == NULL) { - kfree(gb); - return NULL; - } - - gb->buf_size = size; - gb->buf_get = gb->buf_put = gb->buf_buf; - - return gb; -} - -/* - * gs_buf_free - * - * Free the buffer and all associated memory. - */ -static void gs_buf_free(struct gs_buf *gb) -{ - if (gb) { - kfree(gb->buf_buf); - kfree(gb); - } -} - -/* - * gs_buf_clear - * - * Clear out all data in the circular buffer. - */ -static void gs_buf_clear(struct gs_buf *gb) -{ - if (gb != NULL) - gb->buf_get = gb->buf_put; - /* equivalent to a get of all data available */ -} - -/* - * gs_buf_data_avail - * - * Return the number of bytes of data available in the circular - * buffer. - */ -static unsigned int gs_buf_data_avail(struct gs_buf *gb) -{ - if (gb != NULL) - return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; - else - return 0; -} - -/* - * gs_buf_space_avail - * - * Return the number of bytes of space available in the circular - * buffer. - */ -static unsigned int gs_buf_space_avail(struct gs_buf *gb) -{ - if (gb != NULL) - return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; - else - return 0; -} - -/* - * gs_buf_put - * - * Copy data data from a user buffer and put it into the circular buffer. - * Restrict to the amount of space available. - * - * Return the number of bytes copied. - */ -static unsigned int -gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count) -{ - unsigned int len; - - if (gb == NULL) - return 0; - - len = gs_buf_space_avail(gb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = gb->buf_buf + gb->buf_size - gb->buf_put; - if (count > len) { - memcpy(gb->buf_put, buf, len); - memcpy(gb->buf_buf, buf+len, count - len); - gb->buf_put = gb->buf_buf + count - len; - } else { - memcpy(gb->buf_put, buf, count); - if (count < len) - gb->buf_put += count; - else /* count == len */ - gb->buf_put = gb->buf_buf; - } - - return count; -} - -/* - * gs_buf_get - * - * Get data from the circular buffer and copy to the given buffer. - * Restrict to the amount of data available. - * - * Return the number of bytes copied. - */ -static unsigned int -gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count) -{ - unsigned int len; - - if (gb == NULL) - return 0; - - len = gs_buf_data_avail(gb); - if (count > len) - count = len; - - if (count == 0) - return 0; - - len = gb->buf_buf + gb->buf_size - gb->buf_get; - if (count > len) { - memcpy(buf, gb->buf_get, len); - memcpy(buf+len, gb->buf_buf, count - len); - gb->buf_get = gb->buf_buf + count - len; - } else { - memcpy(buf, gb->buf_get, count); - if (count < len) - gb->buf_get += count; - else /* count == len */ - gb->buf_get = gb->buf_buf; - } - - return count; -} - /*-------------------------------------------------------------------------*/ -static struct tty_driver *gs_tty_driver; - /* * gs_module_init * @@ -2211,50 +1019,7 @@ static struct tty_driver *gs_tty_driver; */ static int __init gs_module_init(void) { - int i; - int retval; - - retval = usb_gadget_register_driver(&gs_gadget_driver); - if (retval) { - pr_err("gs_module_init: cannot register gadget driver, " - "ret=%d\n", retval); - return retval; - } - - gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS); - if (!gs_tty_driver) - return -ENOMEM; - gs_tty_driver->owner = THIS_MODULE; - gs_tty_driver->driver_name = GS_SHORT_NAME; - gs_tty_driver->name = "ttygs"; - gs_tty_driver->major = GS_MAJOR; - gs_tty_driver->minor_start = GS_MINOR_START; - gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; - gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - gs_tty_driver->init_termios = tty_std_termios; - /* must match GS_DEFAULT_DTE_RATE and friends */ - gs_tty_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - gs_tty_driver->init_termios.c_ispeed = GS_DEFAULT_DTE_RATE; - gs_tty_driver->init_termios.c_ospeed = GS_DEFAULT_DTE_RATE; - tty_set_operations(gs_tty_driver, &gs_tty_ops); - - for (i = 0; i < GS_NUM_PORTS; i++) - mutex_init(&gs_open_close_lock[i]); - - retval = tty_register_driver(gs_tty_driver); - if (retval) { - usb_gadget_unregister_driver(&gs_gadget_driver); - put_tty_driver(gs_tty_driver); - pr_err("gs_module_init: cannot register tty driver, " - "ret=%d\n", retval); - return retval; - } - - pr_info("gs_module_init: %s %s loaded\n", - GS_LONG_NAME, GS_VERSION_STR); - return 0; + return usb_gadget_register_driver(&gs_gadget_driver); } module_init(gs_module_init); @@ -2265,11 +1030,6 @@ module_init(gs_module_init); */ static void __exit gs_module_exit(void) { - tty_unregister_driver(gs_tty_driver); - put_tty_driver(gs_tty_driver); usb_gadget_unregister_driver(&gs_gadget_driver); - - pr_info("gs_module_exit: %s %s unloaded\n", - GS_LONG_NAME, GS_VERSION_STR); } module_exit(gs_module_exit); |