summaryrefslogblamecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
blob: d1964a0c4168f0e2e12eddf3a3728227d7ddfd56 (plain) (tree)













































































                                                                                 
                                                                                    













                                                                               
                                                                     











































































































































































                                                                                        
                               




                                                                                                                          













                                                                                  













                                                                           

                                                                         


   





                                                       














                                                                              







                                                           
















































                                                          



                                                                      



                                                    















                                                        
                                                     
                                                     




                                                        






                                                            
                                                      



                                                     



                                                              
                                                         


                                                         











































                                                                                                                          

                                   















                                                                                           

                                                                                            







                                                                                                            
                                                      












                                                                                                                                 
                                                        
                                            


                                                         



                                  
                                               













                                                         
                                                


                                              

                                                  
                                                         















































                                                                                



                                                                                           


                                                                   
                           
               
 



                                                                        
 
                                   
                   
                               
         










                                                                 



                                                                     
                                                          


                                                    














                                                                           































                                                                        
                                                       




















































































































































































                                                                                                             




















































                                                                                                 





                                                                              
                                                                                               

























                                                                       
                                                                                                         





























                                                                      
                                                                                                      













































































                                                                                              









                                                                                     


                                                       
                                     
















                                                                                           
                                    









                                                                       

                                                           




                                                                 

                                     

                                                        
 
                                              
                                   
 



                                                                     
         
        
                   
                       
 
 

                                                          
                                        

                                                           
                                  

                               




                                                         
                           
 



                                                                  
                                  

                               





                                                         
                           































































                                                                              
                                               






                                                            
                               








































                                                                                              

                                                         
                                                   



                                            


































































































































































































                                                                                                      




                                
                                           
                         
                                                                      









                                  
                            

























                                                                                  



                                                                                
                






                                                                                                         







                                                                               


                                                                                                              
                                                                                 

                                                                               








                                                                                      




























                                                                                               





















                                                                                    

                                                        



































                                                                                                               




























                                                                         




















































































































                                                                                                        
                                                             













                                                                                   
                                                         





                                                                            
                                                       














































































































                                                                                                                
                                         
                                              






                                                                                                             




                                                 






















































































                                                                                                         
                                              






                                  
                                                       
                   
                                         






                                             

                                                









                                      
                                                 













                                                
/*
 * USB FTDI SIO driver
 *
 * 	Copyright (C) 1999 - 2001
 * 	    Greg Kroah-Hartman (greg@kroah.com)
 *          Bill Ryder (bryder@sgi.com)
 *	Copyright (C) 2002
 *	    Kuba Ober (kuba@mareimbrium.org)
 *
 * 	This program is free software; you can redistribute it and/or modify
 * 	it under the terms of the GNU General Public License as published by
 * 	the Free Software Foundation; either version 2 of the License, or
 * 	(at your option) any later version.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this driver
 *
 * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
 *	and extra documentation
 *
 * (21/Jul/2004) Ian Abbott
 *      Incorporated Steven Turner's code to add support for the FT2232C chip.
 *      The prelimilary port to the 2.6 kernel was by Rus V. Brushkoff.  I have
 *      fixed a couple of things.
 *
 * (27/May/2004) Ian Abbott
 *      Improved throttling code, mostly stolen from the WhiteHEAT driver.
 *
 * (26/Mar/2004) Jan Capek
 *      Added PID's for ICD-U20/ICD-U40 - incircuit PIC debuggers from CCS Inc.
 *
 * (09/Feb/2004) Ian Abbott
 *      Changed full name of USB-UIRT device to avoid "/" character.
 *      Added FTDI's alternate PID (0x6006) for FT232/245 devices.
 *      Added PID for "ELV USB Module UO100" from Stefan Frings.
 * 
 * (21/Oct/2003) Ian Abbott
 *      Renamed some VID/PID macros for Matrix Orbital and Perle Systems
 *      devices.  Removed Matrix Orbital and Perle Systems devices from the
 *      8U232AM device table, but left them in the FT232BM table, as they are
 *      known to use only FT232BM.
 *
 * (17/Oct/2003) Scott Allen
 *      Added vid/pid for Perle Systems UltraPort USB serial converters
 *
 * (21/Sep/2003) Ian Abbott
 *      Added VID/PID for Omnidirectional Control Technology US101 USB to
 *      RS-232 adapter (also rebadged as Dick Smith Electronics XH6381).
 *      VID/PID supplied by Donald Gordon.
 *
 * (19/Aug/2003) Ian Abbott
 *      Freed urb's transfer buffer in write bulk callback.
 *      Omitted some paranoid checks in write bulk callback that don't matter.
 *      Scheduled work in write bulk callback regardless of port's open count.
 *
 * (05/Aug/2003) Ian Abbott
 *      Added VID/PID for ID TECH IDT1221U USB to RS-232 adapter.
 *      VID/PID provided by Steve Briggs.
 *
 * (23/Jul/2003) Ian Abbott
 *      Added PIDs for CrystalFontz 547, 633, 631, 635, 640 and 640 from
 *      Wayne Wylupski.
 *
 * (10/Jul/2003) David Glance
 *      Added PID for DSS-20 SyncStation cradle for Sony-Ericsson P800.
 *
 * (27/Jun/2003) Ian Abbott
 *	Reworked the urb handling logic.  We have no more pool, but dynamically
 *	allocate the urb and the transfer buffer on the fly.  In testing this
 *	does not incure any measurable overhead.  This also relies on the fact
 *	that we have proper reference counting logic for urbs.  I nicked this
 *	from Greg KH's Visor driver.
 *      
 * (23/Jun/2003) Ian Abbott
 *      Reduced flip buffer pushes and corrected a data length test in
 *      ftdi_read_bulk_callback.
 *      Defererence pointers after any paranoid checks, not before.
 *
 * (21/Jun/2003) Erik Nygren
 *      Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip.
 *      See <http://www.home-electro.com/tira1.htm>.  Only operates properly 
 *      at 100000 and RTS-CTS, so set custom divisor mode on startup.
 *      Also force the Tira-1 and USB-UIRT to only use their custom baud rates.
 *
 * (18/Jun/2003) Ian Abbott
 *      Added Device ID of the USB relais from Rudolf Gugler (backported from
 *      Philipp Ghring's patch for 2.5.x kernel).
 *      Moved read transfer buffer reallocation into startup function.
 *      Free existing write urb and transfer buffer in startup function.
 *      Only use urbs in write urb pool that were successfully allocated.
 *      Moved some constant macros out of functions.
 *      Minor whitespace and comment changes.
 *
 * (12/Jun/2003) David Norwood
 *      Added support for USB-UIRT IR transceiver using 8U232AM chip.
 *      See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>.  Only
 *      operates properly at 312500, so set custom divisor mode on startup.
 *
 * (12/Jun/2003) Ian Abbott
 *      Added Sealevel SeaLINK+ 210x, 220x, 240x, 280x vid/pids from Tuan Hoang
 *      - I've eliminated some that don't seem to exist!
 *      Added Home Electronics Tira-1 IR transceiver pid from Chris Horn
 *      Some whitespace/coding-style cleanups
 *
 * (11/Jun/2003) Ian Abbott
 *      Fixed unsafe spinlock usage in ftdi_write
 *
 * (24/Feb/2003) Richard Shooter
 *      Increase read buffer size to improve read speeds at higher baud rates
 *      (specifically tested with up to 1Mb/sec at 1.5M baud)
 *
 * (23/Feb/2003) John Wilkins
 *      Added Xon/xoff flow control (activating support in the ftdi device)
 *      Added vid/pid for Videonetworks/Homechoice (UK ISP)
 *
 * (23/Feb/2003) Bill Ryder
 *      Added matrix orb device vid/pids from Wayne Wylupski
 *
 * (19/Feb/2003) Ian Abbott
 *      For TIOCSSERIAL, set alt_speed to 0 when ASYNC_SPD_MASK value has
 *      changed to something other than ASYNC_SPD_HI, ASYNC_SPD_VHI,
 *      ASYNC_SPD_SHI or ASYNC_SPD_WARP.  Also, unless ASYNC_SPD_CUST is in
 *      force, don't bother changing baud rate when custom_divisor has changed.
 *
 * (18/Feb/2003) Ian Abbott
 *      Fixed TIOCMGET handling to include state of DTR and RTS, the state
 *      of which are now saved by set_dtr() and set_rts().
 *      Fixed improper storage class for buf in set_dtr() and set_rts().
 *      Added FT232BM chip type and support for its extra baud rates (compared
 *      to FT8U232AM).
 *      Took account of special case divisor values for highest baud rates of
 *      FT8U232AM and FT232BM.
 *      For TIOCSSERIAL, forced alt_speed to 0 when ASYNC_SPD_CUST kludge used,
 *      as previous alt_speed setting is now stale.
 *      Moved startup code common between the startup routines for the
 *      different chip types into a common subroutine.
 *
 * (17/Feb/2003) Bill Ryder
 *      Added write urb buffer pool on a per device basis
 *      Added more checking for open file on callbacks (fixed OOPS)
 *      Added CrystalFontz 632 and 634 PIDs 
 *         (thanx to CrystalFontz for the sample devices - they flushed out
 *           some driver bugs)
 *      Minor debugging message changes
 *      Added throttle, unthrottle and chars_in_buffer functions
 *      Fixed FTDI_SIO (the original device) bug
 *      Fixed some shutdown handling
 *      
 * 
 * 
 * 
 * (07/Jun/2002) Kuba Ober
 *	Changed FTDI_SIO_BASE_BAUD_TO_DIVISOR macro into ftdi_baud_to_divisor
 *	function. It was getting too complex.
 *	Fix the divisor calculation logic which was setting divisor of 0.125
 *	instead of 0.5 for fractional parts of divisor equal to 5/8, 6/8, 7/8.
 *	Also make it bump up the divisor to next integer in case of 7/8 - it's
 *	a better approximation.
 *
 * (25/Jul/2002) Bill Ryder inserted Dmitri's TIOCMIWAIT patch
 *      Not tested by me but it doesn't break anything I use.
 * 
 * (04/Jan/2002) Kuba Ober
 *	Implemented 38400 baudrate kludge, where it can be substituted with other
 *	  values. That's the only way to set custom baudrates.
 *	Implemented TIOCSSERIAL, TIOCGSERIAL ioctl's so that setserial is happy.
 *	FIXME: both baudrate things should eventually go to usbserial.c as other
 *	  devices may need that functionality too. Actually, it can probably be
 *	  merged in serial.c somehow - too many drivers repeat this code over
 *	  and over.
 *	Fixed baudrate forgetfulness - open() used to reset baudrate to 9600 every time.
 *	Divisors for baudrates are calculated by a macro.
 *	Small code cleanups. Ugly whitespace changes for Plato's sake only ;-].
 *
 * (04/Nov/2001) Bill Ryder
 *	Fixed bug in read_bulk_callback where incorrect urb buffer was used.
 *	Cleaned up write offset calculation
 *	Added write_room since default values can be incorrect for sio
 *	Changed write_bulk_callback to use same queue_task as other drivers
 *        (the previous version caused panics)
 *	Removed port iteration code since the device only has one I/O port and it
 *	  was wrong anyway.
 * 
 * (31/May/2001) gkh
 *	Switched from using spinlock to a semaphore, which fixes lots of problems.
 *
 * (23/May/2001)   Bill Ryder
 *	Added runtime debug patch (thanx Tyson D Sawyer).
 *	Cleaned up comments for 8U232
 *	Added parity, framing and overrun error handling
 *	Added receive break handling.
 * 
 * (04/08/2001) gb
 *	Identify version on module load.
 *       
 * (18/March/2001) Bill Ryder
 *	(Not released)
 *	Added send break handling. (requires kernel patch too)
 *	Fixed 8U232AM hardware RTS/CTS etc status reporting.
 *	Added flipbuf fix copied from generic device
 * 
 * (12/3/2000) Bill Ryder
 *	Added support for 8U232AM device.
 *	Moved PID and VIDs into header file only.
 *	Turned on low-latency for the tty (device will do high baudrates)
 *	Added shutdown routine to close files when device removed.
 *	More debug and error message cleanups.
 *
 * (11/13/2000) Bill Ryder
 *	Added spinlock protected open code and close code.
 *	Multiple opens work (sort of - see webpage mentioned above).
 *	Cleaned up comments. Removed multiple PID/VID definitions.
 *	Factorised cts/dtr code
 *	Made use of __FUNCTION__ in dbg's
 *      
 * (11/01/2000) Adam J. Richter
 *	usb_device_id table support
 * 
 * (10/05/2000) gkh
 *	Fixed bug with urb->dev not being set properly, now that the usb
 *	core needs it.
 * 
 * (09/11/2000) gkh
 *	Removed DEBUG #ifdefs with call to usb_serial_debug_data
 *
 * (07/19/2000) gkh
 *	Added module_init and module_exit functions to handle the fact that this
 *	driver is a loadable module now.
 *
 * (04/04/2000) Bill Ryder 
 *	Fixed bugs in TCGET/TCSET ioctls (by removing them - they are
 *        handled elsewhere in the tty io driver chain).
 *
 * (03/30/2000) Bill Ryder 
 *	Implemented lots of ioctls
 *	Fixed a race condition in write
 *	Changed some dbg's to errs
 *
 * (03/26/2000) gkh
 *	Split driver up into device specific pieces.
 *
 */

/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
/* Thanx to FTDI for so kindly providing details of the protocol required */
/*   to talk to the device */
/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
#include "usb-serial.h"
#include "ftdi_sio.h"

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.4.3"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"

static int debug;

/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
	void (*setup)(struct usb_serial *); /* Special settings during startup. */
};

static void  ftdi_USB_UIRT_setup	(struct usb_serial *serial);
static void  ftdi_HE_TIRA1_setup	(struct usb_serial *serial);

static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
	.setup = ftdi_USB_UIRT_setup,
};

static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
	.setup = ftdi_HE_TIRA1_setup,
};

/*
 * The 8U232AM has the same API as the sio except for:
 * - it can support MUCH higher baudrates; up to:
 *   o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
 *   o 230400 at 12MHz
 *   so .. 8U232AM's baudrate setting codes are different
 * - it has a two byte status code.
 * - it returns characters every 16ms (the FTDI does it every 40ms)
 *
 * the bcdDevice value is used to differentiate FT232BM and FT245BM from
 * the earlier FT8U232AM and FT8U232BM.  For now, include all known VID/PID
 * combinations in both tables.
 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
 * but I don't know if those ever went into mass production. [Ian Abbott]
 */



static struct usb_device_id id_table_combined [] = {
	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
	{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
		.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
	{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
	{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
	{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
	{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
	{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
	{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
	{ }						/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table_combined);

static struct usb_driver ftdi_driver = {
	.name =		"ftdi_sio",
	.probe =	usb_serial_probe,
	.disconnect =	usb_serial_disconnect,
	.id_table =	id_table_combined,
};

static char *ftdi_chip_name[] = {
	[SIO] = "SIO",	/* the serial part of FT8U100AX */
	[FT8U232AM] = "FT8U232AM",
	[FT232BM] = "FT232BM",
	[FT2232C] = "FT2232C",
};


/* Constants for read urb and write urb */
#define BUFSZ 512
#define PKTSZ 64

/* rx_flags */
#define THROTTLED		0x01
#define ACTUALLY_THROTTLED	0x02

struct ftdi_private {
	ftdi_chip_type_t chip_type;
				/* type of the device, either SIO or FT8U232AM */
	int baud_base;		/* baud base clock for divisor setting */
	int custom_divisor;	/* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
	__u16 last_set_data_urb_value ;
				/* the last data state set - needed for doing a break */
        int write_offset;       /* This is the offset in the usb data block to write the serial data - 
				 * it is different between devices
				 */
	int flags;		/* some ASYNC_xxxx flags are supported */
	unsigned long last_dtr_rts;	/* saved modem control outputs */
        wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
	__u8 rx_flags;		/* receive state flags (throttling) */
	spinlock_t rx_lock;	/* spinlock for receive state */
	struct work_struct rx_work;
	int rx_processed;

	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */

	int force_baud;		/* if non-zero, force the baud rate to this value */
	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
};

/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
/* End TIOCMIWAIT */

#define FTDI_IMPL_ASYNC_FLAGS = ( ASYNC_SPD_HI | ASYNC_SPD_VHI \
 ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP )

/* function prototypes for a FTDI serial converter */
static int  ftdi_sio_probe	(struct usb_serial *serial, const struct usb_device_id *id);
static int  ftdi_sio_attach		(struct usb_serial *serial);
static void ftdi_shutdown		(struct usb_serial *serial);
static int  ftdi_open			(struct usb_serial_port *port, struct file *filp);
static void ftdi_close			(struct usb_serial_port *port, struct file *filp);
static int  ftdi_write			(struct usb_serial_port *port, const unsigned char *buf, int count);
static int  ftdi_write_room		(struct usb_serial_port *port);
static int  ftdi_chars_in_buffer	(struct usb_serial_port *port);
static void ftdi_write_bulk_callback	(struct urb *urb, struct pt_regs *regs);
static void ftdi_read_bulk_callback	(struct urb *urb, struct pt_regs *regs);
static void ftdi_process_read		(void *param);
static void ftdi_set_termios		(struct usb_serial_port *port, struct termios * old);
static int  ftdi_tiocmget               (struct usb_serial_port *port, struct file *file);
static int  ftdi_tiocmset		(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
static int  ftdi_ioctl			(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl		(struct usb_serial_port *port, int break_state );
static void ftdi_throttle		(struct usb_serial_port *port);
static void ftdi_unthrottle		(struct usb_serial_port *port);

static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor (int baud);
static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor (int baud);

static struct usb_serial_device_type ftdi_sio_device = {
	.owner =		THIS_MODULE,
	.name =			"FTDI USB Serial Device",
	.short_name =		"ftdi_sio",
	.id_table =		id_table_combined,
	.num_interrupt_in =	0,
	.num_bulk_in =		1,
	.num_bulk_out =		1,
	.num_ports =		1,
	.probe =		ftdi_sio_probe,
	.open =			ftdi_open,
	.close =		ftdi_close,
	.throttle =		ftdi_throttle,
	.unthrottle =		ftdi_unthrottle,
	.write =		ftdi_write,
	.write_room =		ftdi_write_room,
	.chars_in_buffer =	ftdi_chars_in_buffer,
	.read_bulk_callback =	ftdi_read_bulk_callback,
	.write_bulk_callback =	ftdi_write_bulk_callback,
	.tiocmget =             ftdi_tiocmget,
	.tiocmset =             ftdi_tiocmset,
	.ioctl =		ftdi_ioctl,
	.set_termios =		ftdi_set_termios,
	.break_ctl =		ftdi_break_ctl,
	.attach =		ftdi_sio_attach,
	.shutdown =		ftdi_shutdown,
};


#define WDR_TIMEOUT 5000 /* default urb timeout */
#define WDR_SHORT_TIMEOUT 1000	/* shorter urb timeout */

/* High and low are for DTR, RTS etc etc */
#define HIGH 1
#define LOW 0

/*
 * ***************************************************************************
 * Utlity functions
 * ***************************************************************************
 */

static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
	unsigned short int divisor;
	int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
	if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1
	divisor = divisor3 >> 3;
	divisor3 &= 0x7;
	if (divisor3 == 1) divisor |= 0xc000; else // 0.125
	if (divisor3 >= 4) divisor |= 0x4000; else // 0.5
	if (divisor3 != 0) divisor |= 0x8000;      // 0.25
	if (divisor == 1) divisor = 0;	/* special case for maximum baud rate */
	return divisor;
}

static unsigned short int ftdi_232am_baud_to_divisor(int baud)
{
	 return(ftdi_232am_baud_base_to_divisor(baud, 48000000));
}

static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
	__u32 divisor;
	int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
	divisor = divisor3 >> 3;
	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
	/* Deal with special cases for highest baud rates. */
	if (divisor == 1) divisor = 0; else	// 1.0
	if (divisor == 0x4001) divisor = 1;	// 1.5
	return divisor;
}

static __u32 ftdi_232bm_baud_to_divisor(int baud)
{
	 return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
}

#define set_mctrl(port, set)		update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))

static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	char *buf;
	unsigned urb_value;
	int rv;

	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
		dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
		return 0;	/* no change */
	}

	buf = kmalloc(1, GFP_NOIO);
	if (!buf) {
		return -ENOMEM;
	}

	clear &= ~set;	/* 'set' takes precedence over 'clear' */
	urb_value = 0;
	if (clear & TIOCM_DTR)
		urb_value |= FTDI_SIO_SET_DTR_LOW;
	if (clear & TIOCM_RTS)
		urb_value |= FTDI_SIO_SET_RTS_LOW;
	if (set & TIOCM_DTR)
		urb_value |= FTDI_SIO_SET_DTR_HIGH;
	if (set & TIOCM_RTS)
		urb_value |= FTDI_SIO_SET_RTS_HIGH;
	rv = usb_control_msg(port->serial->dev,
			       usb_sndctrlpipe(port->serial->dev, 0),
			       FTDI_SIO_SET_MODEM_CTRL_REQUEST, 
			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
			       urb_value, priv->interface,
			       buf, 0, WDR_TIMEOUT);

	kfree(buf);
	if (rv < 0) {
		err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
				__FUNCTION__,
				(set & TIOCM_DTR) ? "HIGH" :
				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
				(set & TIOCM_RTS) ? "HIGH" :
				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
	} else {
		dbg("%s - DTR %s, RTS %s", __FUNCTION__,
				(set & TIOCM_DTR) ? "HIGH" :
				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
				(set & TIOCM_RTS) ? "HIGH" :
				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
		priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
	}
	return rv;
}


static __u32 get_ftdi_divisor(struct usb_serial_port * port);


static int change_speed(struct usb_serial_port *port)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	char *buf;
        __u16 urb_value;
	__u16 urb_index;
	__u32 urb_index_value;
	int rv;

	buf = kmalloc(1, GFP_NOIO);
	if (!buf)
		return -ENOMEM;

	urb_index_value = get_ftdi_divisor(port);
	urb_value = (__u16)urb_index_value;
	urb_index = (__u16)(urb_index_value >> 16);
	if (priv->interface) {	/* FT2232C */
		urb_index = (__u16)((urb_index << 8) | priv->interface);
	}
	
	rv = usb_control_msg(port->serial->dev,
			    usb_sndctrlpipe(port->serial->dev, 0),
			    FTDI_SIO_SET_BAUDRATE_REQUEST,
			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
			    urb_value, urb_index,
			    buf, 0, WDR_SHORT_TIMEOUT);

	kfree(buf);
	return rv;
}


static __u32 get_ftdi_divisor(struct usb_serial_port * port)
{ /* get_ftdi_divisor */
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	__u32 div_value = 0;
	int div_okay = 1;
	int baud;

	/*
	 * The logic involved in setting the baudrate can be cleanly split in 3 steps.
	 * Obtaining the actual baud rate is a little tricky since unix traditionally
	 * somehow ignored the possibility to set non-standard baud rates.
	 * 1. Standard baud rates are set in tty->termios->c_cflag
	 * 2. If these are not enough, you can set any speed using alt_speed as follows:
	 *    - set tty->termios->c_cflag speed to B38400
	 *    - set your real speed in tty->alt_speed; it gets ignored when
	 *      alt_speed==0, (or)
	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
	 *      flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just
	 *      sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800)
	 * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
	 * 3. You can also set baud rate by setting custom divisor as follows
	 *    - set tty->termios->c_cflag speed to B38400
	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
	 *      o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
	 *      o custom_divisor set to baud_base / your_new_baudrate
	 * ** Step 3 is done courtesy of code borrowed from serial.c - I should really
	 *    spend some time and separate+move this common code to serial.c, it is
	 *    replicated in nearly every serial driver you see.
	 */

	/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */

	baud = tty_get_baud_rate(port->tty);
	dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud);

	/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */

	if (baud == 38400 &&
	    ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
	     (priv->custom_divisor)) {
		baud = priv->baud_base / priv->custom_divisor;
		dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud);
	}

	/* 3. Convert baudrate to device-specific divisor */

	if (!baud) baud = 9600;	
	switch(priv->chip_type) {
	case SIO: /* SIO chip */
		switch(baud) {
		case 300: div_value = ftdi_sio_b300; break;
		case 600: div_value = ftdi_sio_b600; break;
		case 1200: div_value = ftdi_sio_b1200; break;
		case 2400: div_value = ftdi_sio_b2400; break;
		case 4800: div_value = ftdi_sio_b4800; break;
		case 9600: div_value = ftdi_sio_b9600; break;
		case 19200: div_value = ftdi_sio_b19200; break;
		case 38400: div_value = ftdi_sio_b38400; break;
		case 57600: div_value = ftdi_sio_b57600;  break;
		case 115200: div_value = ftdi_sio_b115200; break;
		} /* baud */
		if (div_value == 0) {
  			dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__,  baud);
			div_value = ftdi_sio_b9600;
			div_okay = 0;
		}
		break;
	case FT8U232AM: /* 8U232AM chip */
		if (baud <= 3000000) {
			div_value = ftdi_232am_baud_to_divisor(baud);
		} else {
	                dbg("%s - Baud rate too high!", __FUNCTION__);
			div_value = ftdi_232am_baud_to_divisor(9600);
			div_okay = 0;
		}
		break;
	case FT232BM: /* FT232BM chip */
	case FT2232C: /* FT2232C chip */
		if (baud <= 3000000) {
			div_value = ftdi_232bm_baud_to_divisor(baud);
		} else {
	                dbg("%s - Baud rate too high!", __FUNCTION__);
			div_value = ftdi_232bm_baud_to_divisor(9600);
			div_okay = 0;
		}
		break;
	} /* priv->chip_type */

	if (div_okay) {
		dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
			__FUNCTION__, baud, (unsigned long)div_value,
			ftdi_chip_name[priv->chip_type]);
	}

	return(div_value);
}


static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct serial_struct tmp;

	if (!retinfo)
		return -EFAULT;
	memset(&tmp, 0, sizeof(tmp));
	tmp.flags = priv->flags;
	tmp.baud_base = priv->baud_base;
	tmp.custom_divisor = priv->custom_divisor;
	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
		return -EFAULT;
	return 0;
} /* get_serial_info */


static int set_serial_info(struct usb_serial_port * port, struct serial_struct __user * newinfo)
{ /* set_serial_info */
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct serial_struct new_serial;
	struct ftdi_private old_priv;

	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
		return -EFAULT;
	old_priv = * priv;

	/* Do error checking and permission checking */

	if (!capable(CAP_SYS_ADMIN)) {
		if (((new_serial.flags & ~ASYNC_USR_MASK) !=
		     (priv->flags & ~ASYNC_USR_MASK)))
			return -EPERM;
		priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
			       (new_serial.flags & ASYNC_USR_MASK));
		priv->custom_divisor = new_serial.custom_divisor;
		goto check_and_exit;
	}

	if ((new_serial.baud_base != priv->baud_base) &&
	    (new_serial.baud_base < 9600))
		return -EINVAL;

	/* Make the changes - these are privileged changes! */

	priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
	               (new_serial.flags & ASYNC_FLAGS));	
	priv->custom_divisor = new_serial.custom_divisor;

	port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;

check_and_exit:
	if ((old_priv.flags & ASYNC_SPD_MASK) !=
	     (priv->flags & ASYNC_SPD_MASK)) {
		if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
			port->tty->alt_speed = 57600;
		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
			port->tty->alt_speed = 115200;
		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
			port->tty->alt_speed = 230400;
		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
			port->tty->alt_speed = 460800;
		else
			port->tty->alt_speed = 0;
	}
	if (((old_priv.flags & ASYNC_SPD_MASK) !=
	     (priv->flags & ASYNC_SPD_MASK)) ||
	    (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
	     (old_priv.custom_divisor != priv->custom_divisor))) {
		change_speed(port);
	}
	
	return (0);

} /* set_serial_info */


/* Determine type of FTDI chip based on USB config and descriptor. */
static void ftdi_determine_type(struct usb_serial_port *port)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct usb_serial *serial = port->serial;
	struct usb_device *udev = serial->dev;
	unsigned version;
	unsigned interfaces;

	/* Assume it is not the original SIO device for now. */
	priv->baud_base = 48000000 / 16;
	priv->write_offset = 0;

	version = le16_to_cpu(udev->descriptor.bcdDevice);
	interfaces = udev->actconfig->desc.bNumInterfaces;
	dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__,
			version, interfaces);
	if (interfaces > 1) {
		int inter;

		/* Multiple interfaces.  Assume FT2232C. */
		priv->chip_type = FT2232C;
		/* Determine interface code. */
		inter = serial->interface->altsetting->desc.bInterfaceNumber;
		if (inter == 0) {
			priv->interface = PIT_SIOA;
		} else {
			priv->interface = PIT_SIOB;
		}
		/* BM-type devices have a bug where bcdDevice gets set
		 * to 0x200 when iSerialNumber is 0.  */
		if (version < 0x500) {
			dbg("%s: something fishy - bcdDevice too low for multi-interface device",
					__FUNCTION__);
		}
	} else if (version < 0x200) {
		/* Old device.  Assume its the original SIO. */
		priv->chip_type = SIO;
		priv->baud_base = 12000000 / 16;
		priv->write_offset = 1;
	} else if (version < 0x400) {
		/* Assume its an FT8U232AM (or FT8U245AM) */
		/* (It might be a BM because of the iSerialNumber bug,
		 * but it will still work as an AM device.) */
		priv->chip_type = FT8U232AM;
	} else {
		/* Assume its an FT232BM (or FT245BM) */
		priv->chip_type = FT232BM;
	}
	info("Detected %s", ftdi_chip_name[priv->chip_type]);
}


/*
 * ***************************************************************************
 * Sysfs Attribute
 * ***************************************************************************
 */

static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct usb_serial_port *port = to_usb_serial_port(dev);
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct usb_device *udev;
	unsigned short latency = 0;
	int rv = 0;
	
	udev = to_usb_device(dev);
	
	dbg("%s",__FUNCTION__);
	
	rv = usb_control_msg(udev,
			     usb_rcvctrlpipe(udev, 0),
			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
			     0, priv->interface, 
			     (char*) &latency, 1, WDR_TIMEOUT);
	
	if (rv < 0) {
		dev_err(dev, "Unable to read latency timer: %i", rv);
		return -EIO;
	}
	return sprintf(buf, "%i\n", latency);
}

/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
				   size_t count)
{
	struct usb_serial_port *port = to_usb_serial_port(dev);
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct usb_device *udev;
	char buf[1];
	int v = simple_strtoul(valbuf, NULL, 10);
	int rv = 0;
	
	udev = to_usb_device(dev);
	
	dbg("%s: setting latency timer = %i", __FUNCTION__, v);
	
	rv = usb_control_msg(udev,
			     usb_sndctrlpipe(udev, 0),
			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
			     v, priv->interface, 
			     buf, 0, WDR_TIMEOUT);
	
	if (rv < 0) {
		dev_err(dev, "Unable to write latency timer: %i", rv);
		return -EIO;
	}
	
	return count;
}

/* Write an event character directly to the FTDI register.  The ASCII
   value is in the low 8 bits, with the enable bit in the 9th bit. */
static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
				size_t count)
{
	struct usb_serial_port *port = to_usb_serial_port(dev);
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct usb_device *udev;
	char buf[1];
	int v = simple_strtoul(valbuf, NULL, 10);
	int rv = 0;
	
	udev = to_usb_device(dev);
	
	dbg("%s: setting event char = %i", __FUNCTION__, v);
	
	rv = usb_control_msg(udev,
			     usb_sndctrlpipe(udev, 0),
			     FTDI_SIO_SET_EVENT_CHAR_REQUEST,
			     FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
			     v, priv->interface, 
			     buf, 0, WDR_TIMEOUT);
	
	if (rv < 0) {
		dbg("Unable to write event character: %i", rv);
		return -EIO;
	}
	
	return count;
}

static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);

static void create_sysfs_attrs(struct usb_serial *serial)
{	
	struct ftdi_private *priv;
	struct usb_device *udev;

	dbg("%s",__FUNCTION__);
	
	priv = usb_get_serial_port_data(serial->port[0]);
	udev = serial->dev;
	
	/* XXX I've no idea if the original SIO supports the event_char
	 * sysfs parameter, so I'm playing it safe.  */
	if (priv->chip_type != SIO) {
		dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
		device_create_file(&udev->dev, &dev_attr_event_char);
		if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
			device_create_file(&udev->dev, &dev_attr_latency_timer);
		}
	}
}

static void remove_sysfs_attrs(struct usb_serial *serial)
{
	struct ftdi_private *priv;
	struct usb_device *udev;

	dbg("%s",__FUNCTION__);	

	priv = usb_get_serial_port_data(serial->port[0]);
	udev = serial->dev;
	
	/* XXX see create_sysfs_attrs */
	if (priv->chip_type != SIO) {
		device_remove_file(&udev->dev, &dev_attr_event_char);
		if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
			device_remove_file(&udev->dev, &dev_attr_latency_timer);
		}
	}
	
}

/*
 * ***************************************************************************
 * FTDI driver specific functions
 * ***************************************************************************
 */

/* Probe function to check for special devices */
static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
{
	usb_set_serial_data(serial, (void *)id->driver_info);

	return (0);
}

/* attach subroutine */
static int ftdi_sio_attach (struct usb_serial *serial)
{
	struct usb_serial_port *port = serial->port[0];
	struct ftdi_private *priv;
	struct ftdi_sio_quirk *quirk;
	
	dbg("%s",__FUNCTION__);

	priv = kmalloc(sizeof(struct ftdi_private), GFP_KERNEL);
	if (!priv){
		err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
		return -ENOMEM;
	}
	memset(priv, 0, sizeof(*priv));

	spin_lock_init(&priv->rx_lock);
        init_waitqueue_head(&priv->delta_msr_wait);
	/* This will push the characters through immediately rather
	   than queue a task to deliver them */
	priv->flags = ASYNC_LOW_LATENCY;

	/* Increase the size of read buffers */
	kfree(port->bulk_in_buffer);
	port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
	if (!port->bulk_in_buffer) {
		kfree (priv);
		return -ENOMEM;
	}
	if (port->read_urb) {
		port->read_urb->transfer_buffer = port->bulk_in_buffer;
		port->read_urb->transfer_buffer_length = BUFSZ;
	}

	INIT_WORK(&priv->rx_work, ftdi_process_read, port);

	/* Free port's existing write urb and transfer buffer. */
	if (port->write_urb) {
		usb_free_urb (port->write_urb);
		port->write_urb = NULL;
	}
	kfree(port->bulk_out_buffer);
	port->bulk_out_buffer = NULL;

	usb_set_serial_port_data(serial->port[0], priv);

	ftdi_determine_type (serial->port[0]);
	create_sysfs_attrs(serial);

	/* Check for device requiring special set up. */
	quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
	if (quirk && quirk->setup) {
		quirk->setup(serial);
	}
	
	return (0);
} /* ftdi_sio_attach */


/* Setup for the USB-UIRT device, which requires hardwired
 * baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup (struct usb_serial *serial)
{
	struct ftdi_private *priv;

	dbg("%s",__FUNCTION__);

	priv = usb_get_serial_port_data(serial->port[0]);
	priv->flags |= ASYNC_SPD_CUST;
	priv->custom_divisor = 77;
	priv->force_baud = B38400;
} /* ftdi_USB_UIRT_setup */

/* Setup for the HE-TIRA1 device, which requires hardwired
 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
static void ftdi_HE_TIRA1_setup (struct usb_serial *serial)
{
	struct ftdi_private *priv;

	dbg("%s",__FUNCTION__);

	priv = usb_get_serial_port_data(serial->port[0]);
	priv->flags |= ASYNC_SPD_CUST;
	priv->custom_divisor = 240;
	priv->force_baud = B38400;
	priv->force_rtscts = 1;
} /* ftdi_HE_TIRA1_setup */


/* ftdi_shutdown is called from usbserial:usb_serial_disconnect 
 *   it is called when the usb device is disconnected
 *
 *   usbserial:usb_serial_disconnect
 *      calls __serial_close for each open of the port
 *      shutdown is called then (ie ftdi_shutdown)
 */


static void ftdi_shutdown (struct usb_serial *serial)
{ /* ftdi_shutdown */
	
	struct usb_serial_port *port = serial->port[0];
	struct ftdi_private *priv = usb_get_serial_port_data(port);

	dbg("%s", __FUNCTION__);

	remove_sysfs_attrs(serial);
	
	/* all open ports are closed at this point 
         *    (by usbserial.c:__serial_close, which calls ftdi_close)  
	 */

	if (priv) {
		usb_set_serial_port_data(port, NULL);
		kfree(priv);
	}
} /* ftdi_shutdown */


static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_open */
	struct termios tmp_termios;
	struct usb_device *dev = port->serial->dev;
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	
	int result = 0;
	char buf[1]; /* Needed for the usb_control_msg I think */

	dbg("%s", __FUNCTION__);


	port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;

	/* No error checking for this (will get errors later anyway) */
	/* See ftdi_sio.h for description of what is reset */
	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
			FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, 
			FTDI_SIO_RESET_SIO, 
			priv->interface, buf, 0, WDR_TIMEOUT);

	/* Termios defaults are set by usb_serial_init. We don't change
	   port->tty->termios - this would loose speed settings, etc.
	   This is same behaviour as serial.c/rs_open() - Kuba */

	/* ftdi_set_termios  will send usb control messages */
	ftdi_set_termios(port, &tmp_termios);

	/* FIXME: Flow control might be enabled, so it should be checked -
	   we have no control of defaults! */
	/* Turn on RTS and DTR since we are not flow controlling by default */
	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);

	/* Not throttled */
	spin_lock_irqsave(&priv->rx_lock, flags);
	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
	spin_unlock_irqrestore(&priv->rx_lock, flags);

	/* Start reading from the device */
	priv->rx_processed = 0;
	usb_fill_bulk_urb(port->read_urb, dev,
		      usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
		      ftdi_read_bulk_callback, port);
	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
	if (result)
		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);


	return result;
} /* ftdi_open */



/* 
 * usbserial:__serial_close  only calls ftdi_close if the point is open
 *
 *   This only gets called when it is the last close
 *   
 *   
 */

static void ftdi_close (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_close */
	unsigned int c_cflag = port->tty->termios->c_cflag;
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	char buf[1];

	dbg("%s", __FUNCTION__);

	if (c_cflag & HUPCL){
		/* Disable flow control */
		if (usb_control_msg(port->serial->dev, 
				    usb_sndctrlpipe(port->serial->dev, 0),
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
				    0, priv->interface, buf, 0,
				    WDR_TIMEOUT) < 0) {
			err("error from flowcontrol urb");
		}	    

		/* drop RTS and DTR */
		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
	} /* Note change no line if hupcl is off */

	/* cancel any scheduled reading */
	cancel_delayed_work(&priv->rx_work);
	flush_scheduled_work();
	
	/* shutdown our bulk read */
	if (port->read_urb)
		usb_kill_urb(port->read_urb);
} /* ftdi_close */


  
/* The SIO requires the first byte to have:
 *  B0 1
 *  B1 0
 *  B2..7 length of message excluding byte 0
 *
 * The new devices do not require this byte
 */
static int ftdi_write (struct usb_serial_port *port,
			   const unsigned char *buf, int count)
{ /* ftdi_write */
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct urb *urb;
	unsigned char *buffer;
	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
	int status;
	int transfer_size;

	dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);

	if (count == 0) {
		dbg("write request of 0 bytes");
		return 0;
	}
	
	data_offset = priv->write_offset;
        dbg("data_offset set to %d",data_offset);

	/* Determine total transfer size */
	transfer_size = count;
	if (data_offset > 0) {
		/* Original sio needs control bytes too... */
		transfer_size += (data_offset *
				((count + (PKTSZ - 1 - data_offset)) /
				 (PKTSZ - data_offset)));
	}

	buffer = kmalloc (transfer_size, GFP_ATOMIC);
	if (!buffer) {
		err("%s ran out of kernel memory for urb ...", __FUNCTION__);
		return -ENOMEM;
	}

	urb = usb_alloc_urb(0, GFP_ATOMIC);
	if (!urb) {
		err("%s - no more free urbs", __FUNCTION__);
		kfree (buffer);
		return -ENOMEM;
	}

	/* Copy data */
	if (data_offset > 0) {
		/* Original sio requires control byte at start of each packet. */
		int user_pktsz = PKTSZ - data_offset;
		int todo = count;
		unsigned char *first_byte = buffer;
		const unsigned char *current_position = buf;

		while (todo > 0) {
			if (user_pktsz > todo) {
				user_pktsz = todo;
			}
			/* Write the control byte at the front of the packet*/
			*first_byte = 1 | ((user_pktsz) << 2); 
			/* Copy data for packet */
			memcpy (first_byte + data_offset,
				current_position, user_pktsz);
			first_byte += user_pktsz + data_offset;
			current_position += user_pktsz;
			todo -= user_pktsz;
		}
	} else {
		/* No control byte required. */
		/* Copy in the data to send */
		memcpy (buffer, buf, count);
	}

	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer);

	/* fill the buffer and send it */
	usb_fill_bulk_urb(urb, port->serial->dev, 
		      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
		      buffer, transfer_size,
		      ftdi_write_bulk_callback, port);

	status = usb_submit_urb(urb, GFP_ATOMIC);
	if (status) {
		err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
		count = status;
		kfree (buffer);
	}

	/* we are done with this urb, so let the host driver
	 * really free it when it is finished with it */
	usb_free_urb (urb);

	dbg("%s write returning: %d", __FUNCTION__, count);
	return count;
} /* ftdi_write */


/* This function may get called when the device is closed */

static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;

	/* free up the transfer buffer, as usb_free_urb() does not do this */
	kfree (urb->transfer_buffer);

	dbg("%s - port %d", __FUNCTION__, port->number);
	
	if (urb->status) {
		dbg("nonzero write bulk status received: %d", urb->status);
		return;
	}

	schedule_work(&port->work);
} /* ftdi_write_bulk_callback */


static int ftdi_write_room( struct usb_serial_port *port )
{
	dbg("%s - port %d", __FUNCTION__, port->number);

	/*
	 * We really can take anything the user throws at us
	 * but let's pick a nice big number to tell the tty
	 * layer that we have lots of free space
	 */
	return 2048;
} /* ftdi_write_room */


static int ftdi_chars_in_buffer (struct usb_serial_port *port)
{ /* ftdi_chars_in_buffer */
	dbg("%s - port %d", __FUNCTION__, port->number);

	/* 
	 * We can't really account for how much data we
	 * have sent out, but hasn't made it through to the
	 * device, so just tell the tty layer that everything
	 * is flushed.
	 */
	return 0;
} /* ftdi_chars_in_buffer */



static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{ /* ftdi_read_bulk_callback */
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
	struct tty_struct *tty;
	struct ftdi_private *priv;

	if (urb->number_of_packets > 0) {
		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
		    urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
		err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
	}

	dbg("%s - port %d", __FUNCTION__, port->number);

	if (port->open_count <= 0)
		return;

	tty = port->tty;
	if (!tty) {
		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
		return;
	}

	priv = usb_get_serial_port_data(port);
	if (!priv) {
		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
		return;
	}

	if (urb != port->read_urb) {
		err("%s - Not my urb!", __FUNCTION__);
	}

	if (urb->status) {
		/* This will happen at close every time so it is a dbg not an err */
		dbg("(this is ok on close) nonzero read bulk status received: %d", urb->status);
		return;
	}

	ftdi_process_read(port);

} /* ftdi_read_bulk_callback */


static void ftdi_process_read (void *param)
{ /* ftdi_process_read */
	struct usb_serial_port *port = (struct usb_serial_port*)param;
	struct urb *urb;
	struct tty_struct *tty;
	struct ftdi_private *priv;
	char error_flag;
       	unsigned char *data;

	int i;
	int result;
	int need_flip;
	int packet_offset;
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	if (port->open_count <= 0)
		return;

	tty = port->tty;
	if (!tty) {
		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
		return;
	}

	priv = usb_get_serial_port_data(port);
	if (!priv) {
		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
		return;
	}

	urb = port->read_urb;
	if (!urb) {
		dbg("%s - bad read_urb pointer - exiting", __FUNCTION__);
		return;
	}

	data = urb->transfer_buffer;

	if (priv->rx_processed) {
		dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
				priv->rx_processed,
				urb->actual_length - priv->rx_processed);
	} else {
		/* The first two bytes of every read packet are status */
		if (urb->actual_length > 2) {
			usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
		} else {
			dbg("Status only: %03oo %03oo",data[0],data[1]);
		}
	}


	/* TO DO -- check for hung up line and handle appropriately: */
	/*   send hangup  */
	/* See acm.c - you do a tty_hangup  - eg tty_hangup(tty) */
	/* if CD is dropped and the line is not CLOCAL then we should hangup */

	need_flip = 0;
	for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
		int length;

		/* Compare new line status to the old one, signal if different */
		/* N.B. packet may be processed more than once, but differences
		 * are only processed once.  */
		if (priv != NULL) {
			char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
			if (new_status != priv->prev_status) {
				priv->diff_status |= new_status ^ priv->prev_status;
				wake_up_interruptible(&priv->delta_msr_wait);
				priv->prev_status = new_status;
			}
		}

		length = min(PKTSZ, urb->actual_length-packet_offset)-2;
		if (length < 0) {
			err("%s - bad packet length: %d", __FUNCTION__, length+2);
			length = 0;
		}

		/* have to make sure we don't overflow the buffer
		   with tty_insert_flip_char's */
		if (tty->flip.count+length > TTY_FLIPBUF_SIZE) {
			tty_flip_buffer_push(tty);
			need_flip = 0;

			if (tty->flip.count != 0) {
				/* flip didn't work, this happens when ftdi_process_read() is
				 * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */
				dbg("%s - flip buffer push failed", __FUNCTION__);
				break;
			}
		}
		if (priv->rx_flags & THROTTLED) {
			dbg("%s - throttled", __FUNCTION__);
			break;
		}
		if (tty->ldisc.receive_room(tty)-tty->flip.count < length) {
			/* break out & wait for throttling/unthrottling to happen */
			dbg("%s - receive room low", __FUNCTION__);
			break;
		}

		/* Handle errors and break */
		error_flag = TTY_NORMAL;
		/* Although the device uses a bitmask and hence can have multiple */
		/* errors on a packet - the order here sets the priority the */
		/* error is returned to the tty layer  */

		if ( data[packet_offset+1] & FTDI_RS_OE ) {
			error_flag = TTY_OVERRUN;
			dbg("OVERRRUN error");
		}
		if ( data[packet_offset+1] & FTDI_RS_BI ) {
			error_flag = TTY_BREAK;
			dbg("BREAK received");
		}
		if ( data[packet_offset+1] & FTDI_RS_PE ) {
			error_flag = TTY_PARITY;
			dbg("PARITY error");
		}
		if ( data[packet_offset+1] & FTDI_RS_FE ) {
			error_flag = TTY_FRAME;
			dbg("FRAMING error");
		}
		if (length > 0) {
			for (i = 2; i < length+2; i++) {
				/* Note that the error flag is duplicated for 
				   every character received since we don't know
				   which character it applied to */
				tty_insert_flip_char(tty, data[packet_offset+i], error_flag);
			}
			need_flip = 1;
		}

#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
		/* if a parity error is detected you get status packets forever
		   until a character is sent without a parity error.
		   This doesn't work well since the application receives a never
		   ending stream of bad data - even though new data hasn't been sent.
		   Therefore I (bill) have taken this out.
		   However - this might make sense for framing errors and so on 
		   so I am leaving the code in for now.
		*/
		else {
			if (error_flag != TTY_NORMAL){
				dbg("error_flag is not normal");
				/* In this case it is just status - if that is an error send a bad character */
				if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
					tty_flip_buffer_push(tty);
				}
				tty_insert_flip_char(tty, 0xff, error_flag);
				need_flip = 1;
			}
		}
#endif
	} /* "for(packet_offset=0..." */

	/* Low latency */
	if (need_flip) {
		tty_flip_buffer_push(tty);
	}

	if (packet_offset < urb->actual_length) {
		/* not completely processed - record progress */
		priv->rx_processed = packet_offset;
		dbg("%s - incomplete, %d bytes processed, %d remain",
				__FUNCTION__, packet_offset,
				urb->actual_length - packet_offset);
		/* check if we were throttled while processing */
		spin_lock_irqsave(&priv->rx_lock, flags);
		if (priv->rx_flags & THROTTLED) {
			priv->rx_flags |= ACTUALLY_THROTTLED;
			spin_unlock_irqrestore(&priv->rx_lock, flags);
			dbg("%s - deferring remainder until unthrottled",
					__FUNCTION__);
			return;
		}
		spin_unlock_irqrestore(&priv->rx_lock, flags);
		/* if the port is closed stop trying to read */
		if (port->open_count > 0){
			/* delay processing of remainder */
			schedule_delayed_work(&priv->rx_work, 1);
		} else {
			dbg("%s - port is closed", __FUNCTION__);
		}
		return;
	}

	/* urb is completely processed */
	priv->rx_processed = 0;

	/* if the port is closed stop trying to read */
	if (port->open_count > 0){
		/* Continue trying to always read  */
		usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
			      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
			      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
			      ftdi_read_bulk_callback, port);

		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
		if (result)
			err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
	}

	return;
} /* ftdi_process_read */


static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	__u16 urb_value = 0; 
	char buf[1];
	
	/* break_state = -1 to turn on break, and 0 to turn off break */
	/* see drivers/char/tty_io.c to see it used */
	/* last_set_data_urb_value NEVER has the break bit set in it */

	if (break_state) {
		urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
	} else {
		urb_value = priv->last_set_data_urb_value; 
	}

	
	if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
			    FTDI_SIO_SET_DATA_REQUEST, 
			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
			    urb_value , priv->interface,
			    buf, 0, WDR_TIMEOUT) < 0) {
		err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state);
	}	   

	dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value);
	
}


/* old_termios contains the original termios settings and tty->termios contains
 * the new setting to be used
 * WARNING: set_termios calls this with old_termios in kernel space
 */

static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{ /* ftdi_termios */
	struct usb_device *dev = port->serial->dev;
	unsigned int cflag = port->tty->termios->c_cflag;
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	__u16 urb_value; /* will hold the new flags */
	char buf[1]; /* Perhaps I should dynamically alloc this? */
	
	// Added for xon/xoff support
	unsigned int iflag = port->tty->termios->c_iflag;
	unsigned char vstop;
	unsigned char vstart;
	
	dbg("%s", __FUNCTION__);

	/* Force baud rate if this device requires it, unless it is set to B0. */
	if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
		dbg("%s: forcing baud rate for this device", __FUNCTION__);
		port->tty->termios->c_cflag &= ~CBAUD;
		port->tty->termios->c_cflag |= priv->force_baud;
	}

	/* Force RTS-CTS if this device requires it. */
	if (priv->force_rtscts) {
		dbg("%s: forcing rtscts for this device", __FUNCTION__);
		port->tty->termios->c_cflag |= CRTSCTS;
	}

	cflag = port->tty->termios->c_cflag;

	/* FIXME -For this cut I don't care if the line is really changing or 
	   not  - so just do the change regardless  - should be able to 
	   compare old_termios and tty->termios */
	/* NOTE These routines can get interrupted by 
	   ftdi_sio_read_bulk_callback  - need to examine what this 
           means - don't see any problems yet */
	
	/* Set number of data bits, parity, stop bits */
	
	urb_value = 0;
	urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
		      FTDI_SIO_SET_DATA_STOP_BITS_1);
	urb_value |= (cflag & PARENB ? 
		      (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : 
		       FTDI_SIO_SET_DATA_PARITY_EVEN) :
		      FTDI_SIO_SET_DATA_PARITY_NONE);
	if (cflag & CSIZE) {
		switch (cflag & CSIZE) {
		case CS5: urb_value |= 5; dbg("Setting CS5"); break;
		case CS6: urb_value |= 6; dbg("Setting CS6"); break;
		case CS7: urb_value |= 7; dbg("Setting CS7"); break;
		case CS8: urb_value |= 8; dbg("Setting CS8"); break;
		default:
			err("CSIZE was set but not CS5-CS8");
		}
	}

	/* This is needed by the break command since it uses the same command - but is
	 *  or'ed with this value  */
	priv->last_set_data_urb_value = urb_value;
	
	if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
			    FTDI_SIO_SET_DATA_REQUEST, 
			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
			    urb_value , priv->interface,
			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
		err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
	}	   

	/* Now do the baudrate */
	if ((cflag & CBAUD) == B0 ) {
		/* Disable flow control */
		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST, 
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
				    0, priv->interface, 
				    buf, 0, WDR_TIMEOUT) < 0) {
			err("%s error from disable flowcontrol urb", __FUNCTION__);
		}	    
		/* Drop RTS and DTR */
		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
	} else {
		/* set the baudrate determined before */
		if (change_speed(port)) {
			err("%s urb failed to set baurdrate", __FUNCTION__);
		}
		/* Ensure  RTS and DTR are raised */
		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
	}

	/* Set flow control */
	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
	if (cflag & CRTSCTS) {
		dbg("%s Setting to CRTSCTS flow control", __FUNCTION__);
		if (usb_control_msg(dev, 
				    usb_sndctrlpipe(dev, 0),
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST, 
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
				    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
				    buf, 0, WDR_TIMEOUT) < 0) {
			err("urb failed to set to rts/cts flow control");
		}		
		
	} else { 
		/*
		 * Xon/Xoff code
		 *
		 * Check the IXOFF status in the iflag component of the termios structure
		 * if IXOFF is not set, the pre-xon/xoff code is executed.
		*/
		if (iflag & IXOFF) {
			dbg("%s  request to enable xonxoff iflag=%04x",__FUNCTION__,iflag);
			// Try to enable the XON/XOFF on the ftdi_sio
			// Set the vstart and vstop -- could have been done up above where
			// a lot of other dereferencing is done but that would be very
			// inefficient as vstart and vstop are not always needed
			vstart=port->tty->termios->c_cc[VSTART];
			vstop=port->tty->termios->c_cc[VSTOP];
			urb_value=(vstop << 8) | (vstart);

			if (usb_control_msg(dev,
					    usb_sndctrlpipe(dev, 0),
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
					    urb_value , (FTDI_SIO_XON_XOFF_HS
							 | priv->interface),
					    buf, 0, WDR_TIMEOUT) < 0) {
				err("urb failed to set to xon/xoff flow control");
			}
		} else {
			/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
			/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
			dbg("%s Turning off hardware flow control", __FUNCTION__);
			if (usb_control_msg(dev, 
					    usb_sndctrlpipe(dev, 0),
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST, 
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
					    0, priv->interface, 
					    buf, 0, WDR_TIMEOUT) < 0) {
				err("urb failed to clear flow control");
			}				
		}
		
	}
	return;
} /* ftdi_termios */


static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	unsigned char buf[2];
	int ret;

	dbg("%s TIOCMGET", __FUNCTION__);
	switch (priv->chip_type) {
	case SIO:
		/* Request the status from the device */
		if ((ret = usb_control_msg(port->serial->dev, 
					   usb_rcvctrlpipe(port->serial->dev, 0),
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST, 
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
					   0, 0, 
					   buf, 1, WDR_TIMEOUT)) < 0 ) {
			err("%s Could not get modem status of device - err: %d", __FUNCTION__,
			    ret);
			return(ret);
		}
		break;
	case FT8U232AM:
	case FT232BM:
	case FT2232C:
		/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
		   format as the data returned from the in point */
		if ((ret = usb_control_msg(port->serial->dev, 
					   usb_rcvctrlpipe(port->serial->dev, 0),
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST, 
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
					   0, priv->interface, 
					   buf, 2, WDR_TIMEOUT)) < 0 ) {
			err("%s Could not get modem status of device - err: %d", __FUNCTION__,
			    ret);
			return(ret);
		}
		break;
	default:
		return -EFAULT;
		break;
	}
	
	return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
		(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
		(buf[0]  & FTDI_SIO_RI_MASK  ? TIOCM_RI  : 0) |
		(buf[0]  & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
		priv->last_dtr_rts;			
}

static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
{
	dbg("%s TIOCMSET", __FUNCTION__);
	return update_mctrl(port, set, clear);
}


static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);

	dbg("%s cmd 0x%04x", __FUNCTION__, cmd);

	/* Based on code from acm.c and others */
	switch (cmd) {

	case TIOCGSERIAL: /* gets serial port data */
		return get_serial_info(port, (struct serial_struct __user *) arg);

	case TIOCSSERIAL: /* sets serial port data */
		return set_serial_info(port, (struct serial_struct __user *) arg);

	/*
	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
	 * - mask passed in arg for lines of interest
	 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
	 * Caller should use TIOCGICOUNT to see which one it was.
	 *
	 * This code is borrowed from linux/drivers/char/serial.c
	 */
	case TIOCMIWAIT:
		while (priv != NULL) {
			interruptible_sleep_on(&priv->delta_msr_wait);
			/* see if a signal did it */
			if (signal_pending(current))
				return -ERESTARTSYS;
			else {
				char diff = priv->diff_status;

				if (diff == 0) {
					return -EIO; /* no change => error */
				}

				/* Consume all events */
				priv->diff_status = 0;

				/* Return 0 if caller wanted to know about these bits */
				if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
				     ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
				     ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
				     ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) {
					return 0;
				}
				/*
				 * Otherwise caller can't care less about what happened,
				 * and so we continue to wait for more events.
				 */
			}
		}
		return(0);
		break;
	default:
		break;
		
	}


	/* This is not necessarily an error - turns out the higher layers will do 
	 *  some ioctls itself (see comment above)
	 */
	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd);

	return(-ENOIOCTLCMD);
} /* ftdi_ioctl */


static void ftdi_throttle (struct usb_serial_port *port)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->rx_lock, flags);
	priv->rx_flags |= THROTTLED;
	spin_unlock_irqrestore(&priv->rx_lock, flags);
}


static void ftdi_unthrottle (struct usb_serial_port *port)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	int actually_throttled;
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->rx_lock, flags);
	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
	spin_unlock_irqrestore(&priv->rx_lock, flags);

	if (actually_throttled)
		schedule_work(&priv->rx_work);
}

static int __init ftdi_init (void)
{
	int retval;

	dbg("%s", __FUNCTION__);
	retval = usb_serial_register(&ftdi_sio_device);
	if (retval)
		goto failed_sio_register;
	retval = usb_register(&ftdi_driver);
	if (retval) 
		goto failed_usb_register;

	info(DRIVER_VERSION ":" DRIVER_DESC);
	return 0;
failed_usb_register:
	usb_serial_deregister(&ftdi_sio_device);
failed_sio_register:
	return retval;
}


static void __exit ftdi_exit (void)
{

	dbg("%s", __FUNCTION__);

	usb_deregister (&ftdi_driver);
	usb_serial_deregister (&ftdi_sio_device);

}


module_init(ftdi_init);
module_exit(ftdi_exit);

MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");