/*
* pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __PINCTRL_SAMSUNG_H
#define __PINCTRL_SAMSUNG_H
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
/* register offsets within a pin bank */
#define DAT_REG 0x4
#define PUD_REG 0x8
#define DRV_REG 0xC
#define CONPDN_REG 0x10
#define PUDPDN_REG 0x14
/* pinmux function number for pin as gpio output line */
#define FUNC_OUTPUT 0x1
/**
* enum pincfg_type - possible pin configuration types supported.
* @PINCFG_TYPE_PUD: Pull up/down configuration.
* @PINCFG_TYPE_DRV: Drive strength configuration.
* @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
* @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
*/
enum pincfg_type {
PINCFG_TYPE_PUD,
PINCFG_TYPE_DRV,
PINCFG_TYPE_CON_PDN,
PINCFG_TYPE_PUD_PDN,
};
/*
* pin configuration (pull up/down and drive strength) type and its value are
* packed together into a 16-bits. The upper 8-bits represent the configuration
* type and the lower 8-bits hold the value of the configuration type.
*/
#define PINCFG_TYPE_MASK 0xFF
#define PINCFG_VALUE_SHIFT 8
#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
PINCFG_VALUE_SHIFT)
/**
* enum eint_type - possible external interrupt types.
* @EINT_TYPE_NONE: bank does not support external interrupts
* @EINT_TYPE_GPIO: bank supportes external gpio interrupts
* @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
*
* Samsung GPIO controller groups all the available pins into banks. The pins
* in a pin bank can support external gpio interrupts or external wakeup
* interrupts or no interrupts at all. From a software perspective, the only
* difference between external gpio and external wakeup interrupts is that
* the wakeup interrupts can additionally wakeup the system if it is in
* suspended state.
*/
enum eint_type {
EINT_TYPE_NONE,
EINT_TYPE_GPIO,
EINT_TYPE_WKUP,
};
/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
#define PIN_NAME_LENGTH 10
#define PIN_GROUP(n, p, f) \
{ \
.name = n, \
.pins = p, \
.num_pins = ARRAY_SIZE(p), \
.func = f \
}
#define PMX_FUNC(n, g) \
{ \
.name = n, \
.groups = g, \
.num_groups = ARRAY_SIZE(g), \
}
struct samsung_pinctrl_drv_data;
/**
* struct samsung_pin_bank: represent a controller pin-bank.
* @reg_offset: starting offset of the pin-bank registers.
* @pin_base: starting pin number of the bank.
* @nr_pins: number of pins included in this bank.
* @func_width: width of the function selector bit field.
* @pud_width: width of the pin pull up/down selector bit field.
* @drv_width: width of the pin driver strength selector bit field.
* @conpdn_width: width of the sleep mode function selector bin field.
* @pudpdn_width: width of the sleep mode pull up/down selector bit field.
* @eint_type: type of the external interrupt supported by the bank.
* @irq_base: starting controller local irq number of the bank.
* @name: name to be prefixed for each pin in this pin bank.
*/
struct samsung_pin_bank {
u32 pctl_offset;
u32 pin_base;
u8 nr_pins;
u8 func_width;
u8 pud_width;
u8 drv_width;
u8 conpdn_width;
u8 pudpdn_width;
enum eint_type eint_type;
u32 irq_base;
char *name;
};
/**
* struct samsung_pin_ctrl: represent a pin controller.
* @pin_banks: list of pin banks included in this controller.
* @nr_banks: number of pin banks.
* @base: starting system wide pin number.
* @nr_pins: number of pins supported by the controller.
* @nr_gint: number of external gpio interrupts supported.
* @nr_wint: number of external wakeup interrupts supported.
* @geint_con: offset of the ext-gpio controller registers.
* @geint_mask: offset of the ext-gpio interrupt mask registers.
* @geint_pend: offset of the ext-gpio interrupt pending registers.
* @weint_con: offset of the ext-wakeup controller registers.
* @weint_mask: offset of the ext-wakeup interrupt mask registers.
* @weint_pend: offset of the ext-wakeup interrupt pending registers.
* @svc: offset of the interrupt service register.
* @eint_gpio_init: platform specific callback to setup the external gpio
* interrupts for the controller.
* @eint_wkup_init: platform specific callback to setup the external wakeup
* interrupts for the controller.
* @label: for debug information.
*/
struct samsung_pin_ctrl {
struct samsung_pin_bank *pin_banks;
u32 nr_banks;
u32 base;
u32 nr_pins;
u32 nr_gint;
u32 nr_wint;
u32 geint_con;
u32 geint_mask;
u32 geint_pend;
u32 weint_con;
u32 weint_mask;
u32 weint_pend;
u32 svc;
int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
char *label;
};
/**
* struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
* @virt_base: register base address of the controller.
* @dev: device instance representing the controller.
* @irq: interrpt number used by the controller to notify gpio interrupts.
* @ctrl: pin controller instance managed by the driver.
* @pctl: pin controller descriptor registered with the pinctrl subsystem.
* @pctl_dev: cookie representing pinctrl device instance.
* @pin_groups: list of pin groups available to the driver.
* @nr_groups: number of such pin groups.
* @pmx_functions: list of pin functions available to the driver.
* @nr_function: number of such pin functions.
* @gc: gpio_chip instance registered with gpiolib.
* @grange: linux gpio pin range supported by this controller.
*/
struct samsung_pinctrl_drv_data {
void __iomem *virt_base;
struct device *dev;
int irq;
struct samsung_pin_ctrl *ctrl;
struct pinctrl_desc pctl;
struct pinctrl_dev *pctl_dev;
const struct samsung_pin_group *pin_groups;
unsigned int nr_groups;
const struct samsung_pmx_func *pmx_functions;
unsigned int nr_functions;
struct irq_domain *gpio_irqd;
struct irq_domain *wkup_irqd;
struct gpio_chip *gc;
struct pinctrl_gpio_range grange;
};
/**
* struct samsung_pin_group: represent group of pins of a pinmux function.
* @name: name of the pin group, used to lookup the group.
* @pins: the pins included in this group.
* @num_pins: number of pins included in this group.
* @func: the function number to be programmed when selected.
*/
struct samsung_pin_group {
const char *name;
const unsigned int *pins;
u8 num_pins;
u8 func;
};
/**
* struct samsung_pmx_func: represent a pin function.
* @name: name of the pin function, used to lookup the function.
* @groups: one or more names of pin groups that provide this function.
* @num_groups: number of groups included in @groups.
*/
struct samsung_pmx_func {
const char *name;
const char **groups;
u8 num_groups;
};
/* list of all exported SoC specific data */
extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
#endif /* __PINCTRL_SAMSUNG_H */
