| Age | Commit message (Collapse) | Author |
|---|
|
The station may be relevant for queuing and will also generally be
resolved in some cases. However, we want to be able to prevent looking
up the station based on the address.
Add a station parameter, which can be set to the correct station, to an
error value to prevent station lookup or to NULL to get the old
behaviour where the address is used to find the appropriate station.
Also disable the station lookup for ieee80211_tx_skb_tid_band already as
it does not make any sense to find a station when doing an off-channel
transmit.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260915151925.759b6144ddf9.Ib7be90db0d3712d14e7a292023ff3d922baef860@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's similar code in two places in HT and HE, and we need to add
the same again for UHR. Rename ieee80211_link_sta_rc_update_omi()
to ieee80211_link_sta_update_rc_bw() and move it to sta_info.c and
update existing code that can use it to do so.
Link: https://patch.msgid.link/20260529102644.577c2f304d33.I09df4fce83c4e3e6deddfecbea74ffdbeedb4927@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The per-STA bandwidth handling is completely confusing, given
the function names etc.
Move everything to sta_info.c and rename the functions to
accurately reflect what they return:
- ieee80211_sta_bw_capability()
- ieee80211_sta_current_bw() can return the appropriate
bandwidth in the desired direction (a new enum)
At any given time, the bandwidth with which we expect to receive
frames from a station may differ from the bandwidth with which
we may transmit frames to the station; this will happen either
during RX OMI negotiation, or for a long time if the station
used an HT Notify Channel Width frame. We also implement the
(VHT) Operating Mode Notification as an asymmetric setting, even
if the spec would seem to imply it could be symmetric.
Also rename the 'cur_max_bandwidth' value to 'op_mode_bw' which
matches the 'op_mode_nss', indicating more clearly what it _is_
rather than how it's _used_. It's not quite precise (NSS is)
since it's also HT chanwidth notification, but that seems OK.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.09ae71b74d5c.Ib59c2ac82e030559d1f7d462f06ba3488a090946@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can now easily always call _ieee80211_sta_cur_vht_bw() with
a valid chandef, so do that, remove ieee80211_sta_cur_vht_bw()
and drop the underscore prefix.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.73659adc198f.Ic8fc88a7e016e62d00dca380ffbf47a54ef3daef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, the initial STA bandwidth is set during each
parsing of HT/VHT/... elements to the station capabilities,
multiple times, in a confusing way that's not very good in
the case of NAN stations either.
For now, keep the NULL chandef pointer and all that, but
clean up the initial handling of NSS/BW capabilities and
then apply the VHT operation mode on top of that. This
clarifies the code and the client code now also handles
the bandwidth change from Operating Mode Notification in
association response.
The HT code is completely unnecessary now, since the VHT
(soon to be renamed) function will be called and handles
HT as well.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.a4d88eb27a8d.Id7a316e75e7e3dce2023d987e6939060f5286378@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This function is only called for at least HT capable stations,
so doesn't need to differentiate 20/20_NOHT. Also, the check
for VHT 160 MHz support is wrong, since a station could have
support for both and the AP is using 80+80, but nothing cares
anyway, so we don't need that.
Simplify the function and move it to util.c since it now no
longer is related to VHT, and also doesn't need a station.
Also use the new function in ieee80211_get_sta_bw() for the
chandef calculations, it just needs to handle the 20/20-noht
separately; while at it fix that to handle HE stations.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.7b0be1059436.I573add4e3ed68b15f8b45122d053ac523afe4025@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When an HT channel width update comes in, don't use the
capability of the station, but rather set it to max as
the capability will be taken into account anyway when
using the value.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.bab6e4195d78.I9683605229ed1b75ff5a9c14e967762e88b3fc36@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of calculating the individual maximum for each
station from its capabilities, just unconditionally set
cur_max_bandwidth to IEEE80211_STA_RX_BW_MAX. This still
works because cur_max_bandwidth is only used together
with the capabilities of the station anyway, and then
adjusted by HT channel width notification or VHT opmode
notification action frames.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.43cdb11b5c7e.I99a7ea2ab10b6fffb68a401a26b98d546e428c11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for both NMI and NDI stations.
The NDI station will be linked to the NMI station of the NAN peer for
which the NDI station is added.
A peer can choose to reuse its NMI address as the NDI address.
Since different keys might be in use for NAN management and for data
frames, we will have 2 different stations, even if they'll have the same
address.
Even though there are no links in NAN, sta->deflink will still be used
to store the one set of capabilities and SMPS mode.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.9fdd37b8e755.I7a7bd6e8e751cab49c329419485839afd209cfc6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In NAN, we have one set of (HT, VHT, HE) capabilities for all bands,
which means that we will need to process those capabilities without a
given sband.
To prepare for that, remove the sband argument from
ieee80211_ht_cap_ie_to_sta_ht_cap and ieee80211_he_cap_ie_to_sta_he_cap
and pass our own capabilities instead.
For ieee80211_vht_cap_ie_to_sta_vht_cap, make the sband argument
optional, since it is also used to check if there is at least one channel
that supports 80 MHz.
(Note that this check doesn't make much sense, but this can be handled in
a different patch.)
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320141504.e42ef1f0eabb.If994d6346f00219437e22043e7bf2395b827b34a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
S1G defines use of NDP Block Ack (BA) for aggregation, requiring negotiation
of NDP ADDBA/DELBA action frames. If the S1G recipient supports HT-immediate
block ack, the sender must send an NDP ADDBA Request indicating it expects
only NDP BlockAck frames for the agreement.
Introduce support for NDP ADDBA and DELBA exchange in mac80211. The
implementation negotiates the BA mechanism during setup based on station
capabilities and driver support (IEEE80211_HW_SUPPORTS_NDP_BLOCKACK).
If negotiation fails due to mismatched expectations, a rejection with status code
WLAN_STATUS_REJECTED_NDP_BLOCK_ACK_SUGGESTED is returned as per IEEE 802.11-2024.
Trace sample:
IEEE 802.11 Wireless Management
Fixed parameters
Category code: Block Ack (3)
Action code: NDP ADDBA Request (0x80)
Dialog token: 0x01
Block Ack Parameters: 0x1003, A-MSDUs, Block Ack Policy
.... .... .... ...1 = A-MSDUs: Permitted in QoS Data MPDUs
.... .... .... ..1. = Block Ack Policy: Immediate Block Ack
.... .... ..00 00.. = Traffic Identifier: 0x0
0001 0000 00.. .... = Number of Buffers (1 Buffer = 2304 Bytes): 64
Block Ack Timeout: 0x0000
Block Ack Starting Sequence Control (SSC): 0x0010
.... .... .... 0000 = Fragment: 0
0000 0000 0001 .... = Starting Sequence Number: 1
IEEE 802.11 Wireless Management
Fixed parameters
Category code: Block Ack (3)
Action code: NDP ADDBA Response (0x81)
Dialog token: 0x02
Status code: BlockAck negotiation refused because, due to buffer constraints and other unspecified reasons, the recipient prefers to generate only NDP BlockAck frames (0x006d)
Block Ack Parameters: 0x1002, Block Ack Policy
.... .... .... ...0 = A-MSDUs: Not Permitted
.... .... .... ..1. = Block Ack Policy: Immediate Block Ack
.... .... ..00 00.. = Traffic Identifier: 0x0
0001 0000 00.. .... = Number of Buffers (1 Buffer = 2304 Bytes): 64
Block Ack Timeout: 0x0000
Signed-off-by: Ria Thomas <ria.thomas@morsemicro.com>
Link: https://patch.msgid.link/20260305091304.310990-1-ria.thomas@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The action code actually serves to identify the type of action
frame, so it really isn't part of the per-type structure. Pull
it out and have it in the general action frame format.
In theory, whether or not the action code is present in this
way is up to each category, but all categories that are defined
right now all have that value.
While at it, and since this change requires changing all users,
remove the 'u' and make it an anonymous union in this case, so
that all code using this changes.
Change IEEE80211_MIN_ACTION_SIZE to take an argument which says
how much of the frame is needed, e.g. category, action_code or
the specific frame type that's defined in the union. Again this
also ensures that all code is updated.
In some cases, fix bugs where the SKB length was checked after
having accessed beyond the checked length, in particular in FTM
code, e.g. ieee80211_is_ftm().
Link: https://patch.msgid.link/20260226183607.67e71846b59e.I9a24328e3ffcaae179466a935f1c3345029f9961@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If this action frame, with the value of IEEE80211_HT_CHANWIDTH_ANY,
arrives right after a beacon that changed the operational bandwidth from
20 MHz to 40 MHz, then updating the rate control bandwidth to 40 can
race with updating the chanctx width (that happens in the beacon
proccesing) back to 40 MHz:
cpu0 cpu1
ieee80211_rx_mgmt_beacon
ieee80211_config_bw
ieee80211_link_change_chanreq
(*)ieee80211_link_update_chanreq
ieee80211_rx_h_action
(**)ieee80211_sta_cur_vht_bw
(***) ieee80211_recalc_chanctx_chantype
in (**), the maximum between the capability width and the bss width is
returned. But the bss width was just updated to 40 in (*),
so the action frame handling code will increase the width of the rate
control before the chanctx was increased (in ***), leading to a FW error
(at least in iwlwifi driver. But this is wrong regardless).
Fix this by simply handling the action frame async, so it won't race
with the beacon proccessing.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218632
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.bb9dc6f36c35.I39782d6077424e075974c3bee4277761494a1527@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support EHT 1024 aggregation size in TX
The 1024 agg size for RX is supported but not for TX.
This patch adds this support and refactors common parsing logics for
addbaext in both process_addba_resp and process_addba_req into a
function.
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://patch.msgid.link/20241112083846.32063-1-MeiChia.Chiu@mediatek.com
[pass elems/len instead of mgmt/len/is_req]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between
'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()',
and 'ieee80211_send_delba()', ensure that all related addresses
are '__aligned(2)', and prefer convenient 'ether_addr_copy()'
over generic 'memcpy()'. No functional changes expected.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In MLO, the deflink BSSID is clearly invalid. Since we fill
the addresses as MLD addresses and translate later, use the
AP address here instead.
This fixes an issue that happens with HW restart, where the
DelBA frame is transmitted, but not processed correctly due
to the wrong BSSID (or even just discarded entirely). As a
result, the BA sessions are kept alive; however, as other
state is reset during HW restart, this then fails (reorder,
etc.) and data doesn't go through until new BA sessions are
established.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510112601.f4e1effdea29.I98e81f22166b68d4b6211191bcaaf8531b324a77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have 13 bits for the status_data, so restricting
type to 4 and subdata to 8 bits is confusing, even if
we don't need more bits now. Change subdata mask to
be 9 bits instead, just to make things match up.
If we actually need more types or more subdata bits
we can later also reshuffle the bits between these,
but we should probably keep them at 13 bits together.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.28ac7b665039.I1abbb13e90f016cab552492e05f5cb5b52de6463@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Even if there are a lot of possible ways drivers might
call this, at least knowing when they do and with what
settings can be useful. Add tracing for it.
Link: https://msgid.link/20240129195435.b20d2ead2013.I8213e65c274451d523a3397519ac578c3ed2df4d@changeid
[removed link-id contortions as suggested by Jeff]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The new 320 MHz channel width wasn't handled, so connecting
a station to a 320 MHz AP would limit the station to 20 MHz
(on HT) after a warning, handle 320 MHz to fix that.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231109182201.495381-1-greearb@candelatech.com
[write a proper commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We now hold the wiphy mutex everywhere that we use or
needed the A-MPDU locking, so we don't need this mutex
any more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Convert the A-MPDU work to wiphy work so it holds the
wiphy mutex and we can later guarantee that to drivers.
It might seem that we could run these concurrently for
different stations, but they're all on the ordered
mac80211 workqueue, so this shouldn't matter for that.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The current SMPS status handling isn't per link, so we only
ever change the deflink, which is obviously wrong, it's not
even used for multi-link connections, but the request API
actually includes the link ID.
Use the new status_data changes to move the handling to the
right link, this also saves parsing the frame again on the
status report, instead we can now check only if it was an
SMPS frame.
Of course, move the worker to be a wiphy work so that we're
able to cancel it safely for the link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the connection is a MLO connection, a SMPS request should be
sent on a specific link, as SMPS is BSS specific, and the DA and BSSID
used for the action frame transmission should be the AP MLD address, as
the underlying driver is expected to perform the address translation
(based on the link ID).
Fix the SMPS request handling to use the AP MLD address and provide the
link ID for the request processing during Tx.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
SMPS requests are per link, and currently there's a potential
deadlock with canceling. Use the new wiphy work to handle SMPS
instead, so that the cancel cannot deadlock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211 must not enable aggregation wile transmitting a fragmented
MPDU. Enforce that for mac80211 internal TX queues (iTXQs).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202301021738.7cd3e6ae-oliver.sang@intel.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20230106223141.98696-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The SMPS power save mode needs to be per-link rather than being shared
for all links. As such, move it into struct ieee80211_link_sta.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This function can be static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since links can be added and removed dynamically, we need to
somehow protect the sdata->link[] and vif->link_conf[] array
pointers from disappearing when accessing them without locks.
RCU-ify the pointers to achieve this, which requires quite a
bit of rework.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to be able to access these in a race-free way under
traffic while adding/removing them, so RCU-ify the pointers.
This requires passing a link_sta to a lot of functions so
we don't have to do the RCU handling everywhere.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start making some SMPS related code MLD-aware. This isn't
really done yet, but again cuts down our 'deflink' reliance.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update ieee80211_ht_cap_ie_to_sta_ht_cap() to handle per-link
data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start reorganizing interface related data structures toward
MLD. The most complex part here is for the keys, since we
have to split the various kinds of GTKs off to the link but
still need to use (for WEP) the other keys as a fallback
even for multicast frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code currently allows this for AP mode, but then ignores
it. Clarify that since the spec doesn't allow it in AP mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.0465f8bcbe32.Iba39fc559ecfa887be00a5f3beabd881e5c86e54@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200707204548.GA9320@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The SMPS feature is defined in the specification only to be
used by non-AP stations and not by APs, so remove the support
for changing the AP's SMPS mode dynamically.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-20-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
According to IEEE802.11 specifications the SM power save field
in the HT capability IE and the HE extended capability IE is valid
only in (re)association frames and should be ignored otherwise.
Remove code paths that handled this also for non AP modes.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-17-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
HE allows peers to negotiate the aggregation fragmentation level to be used
during transmission. The level can be 1-3. The Ext element is added behind
the ADDBA request inside the action frame. The responder will then reply
with the same level or a lower one if the requested one is not supported.
This patch only handles the negotiation part as the ADDBA frames get passed
to the ATH11k firmware, which does the rest of the magic for us aswell as
generating the requests.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190729104512.27615-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The original patch neglected to take byte order conversions
into account, fix that.
Fixes: d9bb410888ce ("mac80211: allow overriding HT STBC capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow user to override STBC configuration for Rx and Tx spatial streams.
In practice RX/TX STBC settings can be modified using appropriate
options in wpa_supplicant configuration file:
tx_stbc=-1..1
rx_stbc=-1..3
This functionality has been added to wpa_supplicant in commit cdeea70f59d0.
In FullMAC case these STBC options are passed to drivers by cfg80211
connect callback in fields of cfg80211_connect_params structure.
However for mac80211 drivers, e.g. for mac80211_hwsim,
overrides for STBC settings are ignored.
The reason why RX/TX STBC capabilities are not modified for mac80211
drivers is as follows. All drivers need to specify supported HT/VHT
overrides explicitly: see ht_capa_mod_mask and vht_capa_mod_mask fields
of wiphy structure. Only supported overrides will be passed to drivers by
cfg80211_connect and cfg80211_mlme_assoc operations: see bitwise 'AND'
performed by cfg80211_oper_and_ht_capa and cfg80211_oper_and_vht_capa.
This commit adds RX/TX STBC HT capabilities to mac80211_ht_capa_mod_mask,
allowing their modifications, as well as applies requested STBC
modifications in function ieee80211_apply_htcap_overrides.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support
and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere.
This is derived from my internal patch, parts of which Luca
had sent upstream.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The mac80211 tear down code is not waiting for the driver call back.
This can bring down the the TX path (TID) till the user manually
reconnects. (Observed with iwldvm and enabled TX aggregation.)
The race can be prevented when the ampdu_mlme worker handles the tear
down.
The race:
* ieee80211_sta_tear_down_BA_sessions calls
___ieee80211_stop_tx_ba_session for all TIDs,
* then cancels the ampdu_mlme worker
* and cleanups the TIDs the driver already has called back for.
* ieee80211_stop_tx_ba_cb will never be called for a TID if the callback
came after the the check in ieee80211_sta_tear_down_BA_sessions.
Signed-off-by: Alexander Wetzel <Alexander.Wetzel@web.de>
[johannes: "enabled" -> "blocked" and invert logic, simplify init]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
SMPS_MODE change value notified via nl80211 contains mac80211
specific value(ieee80211_smps_mode) and user space application
will not know those values. This patch add support to map
the mac80211 enum value to nl80211_smps_mode which will be
understood by the userspace application.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
We have things all over the place, no point listing them.
One thing is notable: I applied two patches and later
reverted them - we'll get back to that once all the driver
situation is sorted out.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in some cases I replaced "fall through on else" and
"otherwise fall through" comments with just a "fall through" comment,
which is what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Due to overlap between
commit 1281103770e9 ("mac80211: Simplify locking in ieee80211_sta_tear_down_BA_sessions()")
and the way that Luca modified
commit 72e2c3438ba3 ("mac80211: tear down RX aggregations first")
when sending it upstream from Intel's internal tree, we get
the following warning:
WARNING: CPU: 0 PID: 5472 at net/mac80211/agg-tx.c:315 ___ieee80211_stop_tx_ba_session+0x158/0x1f0
since there's no appropriate locking around the call to
___ieee80211_stop_tx_ba_session; Sara's original just had
a call to the locked __ieee80211_stop_tx_ba_session (one
less underscore) but it looks like Luca modified both of
the calls when fixing it up for upstream, leading to the
problem at hand.
Move the locking appropriately to fix this problem.
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When doing HW restart we tear down aggregations.
Since at this point we are not TX'ing any aggregation, while
the peer is still sending RX aggregation over the air, it will
make sense to tear down the RX aggregations first.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
