| Age | Commit message (Collapse) | Author |
|---|
|
Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added
NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which
rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with
-ERANGE.
However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user
sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits
FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and
parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0,
sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with
fou->protocol == 0.
In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb()
triggers IP protocol resubmission when fou->protocol > 0, whereas
returning 0 tells the UDP tunnel layer that the skb was consumed without
freeing it. When fou->protocol == 0, every packet received on the socket
returns 0 from fou_udp_recv() and leaks the sk_buff.
Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that
creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with
-EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share
parse_nl_config()) unaffected.
Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic
Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE =
FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel,
FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and
fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks
all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to
59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected
with -EINVAL (-22).
Fixes: 23461551c006 ("fou: Support for foo-over-udp RX path")
Fixes: 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.")
Cc: stable@vger.kernel.org
Signed-off-by: Hui Peng <benquike@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260921045920.1613098-1-benquike@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc6).
No conflicts.
Adjacent changes:
net/ipv4/route.c
dbc3791e3b24 ("net: do not send ICMP/NDISC Redirects when peer allocation fails")
7804eaa057fe ("ipv4: snapshot dst.dev in ip_rt_send_redirect() and ip_rt_get_source()")
drivers/net/tun.c
23dad2d088df ("tun: no longer rely on RTNL in tun_fill_info()")
c3da92af07ea ("Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"")
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
3bd438a58e91 ("octeontx2-af: Block VFs from clobbering special CGX PKIND state")
5ba5611ef946 ("octeontx2-af: reserve 4 PKINDs for skip-size custom use")
drivers/net/wireless/ath/ath12k/core.h
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/peer.c
469d7e6077c1 ("wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event")
378e659029d5 ("wifi: ath12k: introduce host_alloc_ml_id hardware parameter")
c42b27336eef ("wifi: ath12k: fix survey indexing across bands")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fou_create() publishes struct fou through sk_user_data before adding the
new FOU port to the per-netns list. If fou_add_to_port_list() fails,
the error path frees fou while it is still reachable through
sk_user_data. A concurrent receive can then dereference the freed
object in fou_from_sock().
This ordering issue was previously noted in the linked discussion.
The failure is reachable when local port 0 is requested. Each socket
binds to a different ephemeral port, but fou_cfg_cmp() compares the
requested port 0 and reports -EALREADY once an entry already exists.
Release the tunnel socket before freeing fou so sk_user_data is cleared
first, and defer reclamation with kfree_rcu() to protect concurrent RCU
readers. This matches the lifetime handling in fou_release().
Fixes: 23461551c006 ("fou: Support for foo-over-udp RX path")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/netdev/20260502031401.3557229-12-kuniyu@google.com/
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260722083858.182506-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Wherever a GSO packet can occur, and its length is used to fill the UDP
header, use udp_set_len that assigns 0 if the length doesn't fit 16
bits, so that the packet can be properly parsed and segmented later,
instead of having truncated length.
Use udp_get_len in udp_validate_len to treat BIG TCP packets as valid.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260710134242.216538-4-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since BIG TCP for UDP tunnels will start using len=0 in the UDP header
as an indicator of a GSO packet bigger than 65535 bytes, this commit
introduces the following getter and setters to use tree-wide, in order
to explicitly mark places where len=0 may be expected, and handle them
properly:
1. udp_set_len() sets uh->len to its real value if it's not bigger than
65535, and to 0 otherwise: to be used in GSO context with aggregated
packets.
2. udp_set_len_short() is to be used when the length is known to fit 16
bits. It WARNs when the caller tries to assign a bigger value if
CONFIG_DEBUG_NET=y.
3. udp_get_len_short() returns len in host byte order: to be used on the
RX side to deal with non-aggregated packets, or to access the raw value
of the len field.
4. udp_get_len() decodes uh->len set by udp_set_len(). It checks whether
the packet is GSO to guard from malformed packets.
At the moment udp_set_len() is not used, a following commit will start
using it after enabling len>65535 for GSO.
Raw uh->len (in network byte order) is still accessed in a few places
for checksum calculation purposes, and to decode len=0 in udpv6_rcv for
jumbograms. udp_rcv and udpv6_rcv will be addressed by the commit that
starts using udp_set_len() to set UDP len=0 for BIG TCP packets in UDP
tunnels.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260710134242.216538-2-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fou does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct fou.
fou_release() frees struct fou with kfree_rcu(), so fou no
longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that the error path in fou_create() looks buggy; once the
tunnel is set up and fou_add_to_port_list() fails, struct fou
should be freed with kfree_rcu() _after_ udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP-Lite has been removed, and its error handler is no
longer found in either inet_protos[IPPROTO_UDPLITE] or
inet6_protos[IPPROTO_UDPLITE].
The recursion fixed by the protocol check in gue_err()
and gue6_err() no longer occurs with UDP-Lite.
Let's remove the checks.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260316133127.2646421-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
syzbot reported skb memleak below. [0]
The repro generated a GUE packet with its inner protocol 0.
gue_udp_recv() returns -guehdr->proto_ctype for "resubmit"
in ip_protocol_deliver_rcu(), but this only works with
non-zero protocol number.
Let's drop such packets.
Note that 0 is a valid number (IPv6 Hop-by-Hop Option).
I think it is not practical to encap HOPOPT in GUE, so once
someone starts to complain, we could pass down a resubmit
flag pointer to distinguish two zeros from the upper layer:
* no error
* resubmit HOPOPT
[0]
BUG: memory leak
unreferenced object 0xffff888109695a00 (size 240):
comm "syz.0.17", pid 6088, jiffies 4294943096
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@..............
backtrace (crc a84b336f):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270
__build_skb+0x23/0x60 net/core/skbuff.c:474
build_skb+0x20/0x190 net/core/skbuff.c:490
__tun_build_skb drivers/net/tun.c:1541 [inline]
tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636
tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770
tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0xa7/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 37dd0247797b1 ("gue: Receive side for Generic UDP Encapsulation")
Reported-by: syzbot+4d8c7d16b0e95c0d0f0d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6965534b.050a0220.38aacd.0001.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove is_ipv6 from napi_gro_cb and use sk->sk_family instead.
This frees up space for another ip_fixedid bit that will be added
in the next commit.
udp_sock_create always creates either a AF_INET or a AF_INET6 socket,
so using sk->sk_family is reliable. In IPv6-FOU, cfg->ipv6_v6only is
always enabled.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-2-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The grc must be initialize first. There can be a condition where if
fou is NULL, goto out will be executed and grc would be used
uninitialized.
Fixes: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240906102839.202798-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We observed a null-ptr-deref in fou_gro_receive() while shutting down
a host. [0]
The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol
in struct fou.
When fou_release() is called due to netns dismantle or explicit tunnel
teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data.
Then, the tunnel socket is destroyed after a single RCU grace period.
So, in-flight udp4_gro_receive() could find the socket and execute the
FOU GRO handler, where sk->sk_user_data could be NULL.
Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL
checks in FOU GRO handlers.
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0
SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1
Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou]
Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42
RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010
RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08
RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002
R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400
R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0
FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
? no_context (arch/x86/mm/fault.c:752)
? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483)
? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571)
? fou_gro_receive (net/ipv4/fou.c:233) [fou]
udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559)
udp4_gro_receive (net/ipv4/udp_offload.c:604)
inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7))
dev_gro_receive (net/core/dev.c:6035 (discriminator 4))
napi_gro_receive (net/core/dev.c:6170)
ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena]
ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena]
napi_poll (net/core/dev.c:6847)
net_rx_action (net/core/dev.c:6917)
__do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299)
asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809)
</IRQ>
do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77)
irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435)
common_interrupt (arch/x86/kernel/irq.c:239)
asm_common_interrupt (arch/x86/include/asm/idtentry.h:626)
RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575)
Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00
RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900
RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64
RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044
R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001
R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000
? sched_clock_cpu (kernel/sched/clock.c:371)
acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3))
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237)
cpuidle_enter (drivers/cpuidle/cpuidle.c:353)
cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239)
do_idle (kernel/sched/idle.c:302)
cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1))
start_kernel (init/main.c:1048)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310)
Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel
CR2: 0000000000000008
Fixes: d92283e338f6 ("fou: change to use UDP socket GRO")
Reported-by: Alphonse Kurian <alkurian@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match
the convention used by common helpers like pskb_may_pull().
This means the condition is inverted:
if (skb_gro_header_hard(skb, hlen))
slow_path();
becomes:
if (!skb_gro_may_pull(skb, hlen))
slow_path();
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two new kfuncs that allow a BPF tc-hook, installed on an ipip
device in collect-metadata mode, to control FOU encap parameters on a
per-packet level. The set of kfuncs is registered with the fou module.
The bpf_skb_set_fou_encap kfunc is supposed to be used in tandem and after
a successful call to the bpf_skb_set_tunnel_key bpf-helper. UDP source and
destination ports can be controlled by passing a struct bpf_fou_encap. A
source port of zero will auto-assign a source port. enum bpf_fou_encap_type
is used to specify if the egress path should FOU or GUE encap the packet.
On the ingress path bpf_skb_get_fou_encap can be used to read UDP source
and destination ports from the receiver's point of view and allows for
packet multiplexing across different destination ports within a single
BPF program and ipip device.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/e17c94a646b63e78ce0dbf3f04b2c33dc948a32d.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generate and plug in the spec-based tables.
A little bit of renaming is needed in the FOU code.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We'll need to link two objects together to form the fou module.
This means the source can't be called fou, the build system expects
fou.o to be the combined object.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
