| Age | Commit message (Collapse) | Author |
|---|
|
The loopback hook gets a shared skb when another ETH_P_IP handler is
bound to the device. skb_unshare() does not unshare it, so
skb_linearize() on a non-linear frame hits BUG_ON(skb_shared()).
Use skb_share_check() instead.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20261007-nb-net-selftest-shared-net-v1-1-458369bfa1ba@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since BIG TCP for UDP tunnels will start using len=0 in the UDP header
as an indicator of a GSO packet bigger than 65535 bytes, this commit
introduces the following getter and setters to use tree-wide, in order
to explicitly mark places where len=0 may be expected, and handle them
properly:
1. udp_set_len() sets uh->len to its real value if it's not bigger than
65535, and to 0 otherwise: to be used in GSO context with aggregated
packets.
2. udp_set_len_short() is to be used when the length is known to fit 16
bits. It WARNs when the caller tries to assign a bigger value if
CONFIG_DEBUG_NET=y.
3. udp_get_len_short() returns len in host byte order: to be used on the
RX side to deal with non-aggregated packets, or to access the raw value
of the len field.
4. udp_get_len() decodes uh->len set by udp_set_len(). It checks whether
the packet is GSO to guard from malformed packets.
At the moment udp_set_len() is not used, a following commit will start
using it after enabling len>65535 for GSO.
Raw uh->len (in network byte order) is still accessed in a few places
for checksum calculation purposes, and to decode len=0 in udpv6_rcv for
jumbograms. udp_rcv and udpv6_rcv will be addressed by the commit that
starts using udp_set_len() to set UDP len=0 for BIG TCP packets in UDP
tunnels.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260710134242.216538-2-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Export the network selftest packet creation infrastructure to allow
network drivers to reuse the existing selftest framework instead of
duplicating packet creation code.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251031111811.775434-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Detect NICs and drivers that either drop frames with a corrupted TCP
checksum or, worse, pass them up as valid. The test flips one bit in
the checksum, transmits the packet in internal loopback, and fails when
the driver reports CHECKSUM_UNNECESSARY.
Discussed at:
https://lore.kernel.org/all/20250625132117.1b3264e8@kernel.org/
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717083524.1645069-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250624183258.3377740-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Zero-initialize TCP header via memset() to avoid garbage values that
may affect checksum or behavior during test transmission.
Also zero-fill allocated payload and padding regions using memset()
after skb_put(), ensuring deterministic content for all outgoing
test packets.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During a W=1 build GCC 13.2 says:
net/core/selftests.c: In function ‘net_selftest_get_strings’:
net/core/selftests.c:404:52: error: ‘%s’ directive output may be truncated writing up to 279 bytes into a region of size 28 [-Werror=format-truncation=]
404 | snprintf(p, ETH_GSTRING_LEN, "%2d. %s", i + 1,
| ^~
net/core/selftests.c:404:17: note: ‘snprintf’ output between 5 and 284 bytes into a destination of size 32
404 | snprintf(p, ETH_GSTRING_LEN, "%2d. %s", i + 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
405 | net_selftests[i].name);
| ~~~~~~~~~~~~~~~~~~~~~~
avoid it by using ethtool_sprintf().
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231026022916.566661-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get it ready for constant netdev->dev_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test if we actually can send/receive packets with MTU size. This kind of
issue was detected on ASIX HW with bogus EEPROM.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port some parts of the stmmac selftest and reuse it as basic generic selftest
library. This patch was tested with following combinations:
- iMX6DL FEC -> AT8035
- iMX6DL FEC -> SJA1105Q switch -> KSZ8081
- iMX6DL FEC -> SJA1105Q switch -> KSZ9031
- AR9331 ag71xx -> AR9331 PHY
- AR9331 ag71xx -> AR9331 switch -> AR9331 PHY
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
