| Age | Commit message (Collapse) | Author |
|---|
|
RTM_GETMULTICAST dumps IPv4 and IPv6 multicast group memberships, but
the device multicast list (dev->mc) is only available through
/proc/net/dev_mcast, so "ip maddr show" still has to parse procfs for
its link-layer entries.
Handle RTM_GETMULTICAST dumps with ifa_family set to AF_PACKET next to
the dev->mc helpers in dev_addr_lists.c and report every entry of
dev->mc in the existing ifaddrmsg format:
- IFA_MULTICAST carries the raw link-layer address
- IFA_MC_USERS carries the entry reference count
- IFA_F_GLOBAL in IFA_FLAGS reports netdev_hw_addr::global_use, set
by dev_mc_add_global() (SIOCADDMULTI) and dev_mc_add_excl()
("bridge fdb add ... self"), i.e. entries added explicitly rather
than by a protocol join. This is the static column of
/proc/net/dev_mcast
- ifa_scope is RT_SCOPE_LINK
This covers every column of /proc/net/dev_mcast. AF_PACKET is the
family iproute2 already uses for link-layer addresses ("ip -0").
The default FDB dump also walks dev->mc, but only for Ethernet devices
and only if the driver uses it, vxlan for example does not, and it has
no users count or global_use bit. Extending it would change "bridge fdb
show" output and add NDA_* attributes.
Requests are always validated, there are no legacy users: prefixlen,
flags and scope must be zero, ifa_index selects one device and
IFA_TARGET_NETNSID is the only attribute accepted. The dump runs under
RCU and netif_addr_lock_bh() without RTNL. cb->seq is set from the
dev->mc generation counter and dev_base_seq before each round and
checked after it, so an entry added or removed since the previous
round sets NLM_F_DUMP_INTR. A round without a message skips the check
and cb->seq is set once more after the round, so the NLMSG_DONE check
reports a change made during the last round or before an empty one.
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20261012011707.3378-5-sigefriedhyy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RTM_GETMULTICAST has been part of the rtnetlink ABI for a long time
and already reports IPv4 multicast group membership through
IFA_MULTICAST and IFA_CACHEINFO. It does not report how many consumers
hold each membership, so userspace still has to parse /proc/net/igmp to
get the Users column.
Add IFA_MC_USERS as a u32 attribute carrying ip_mc_list::users in
RTM_GETMULTICAST replies and entry-lifecycle notifications.
This gives iproute2 enough information to migrate the IPv4 part of
"ip maddr show" from procfs parsing to rtnetlink.
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260630110207.37841-2-sigefriedhyy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fib_rule, ip6_tunnel, and a whole lot of if_* headers lack the customary
_UAPI in the header guard. Without it YNL build can't protect from in tree
and system headers both getting included. YNL doesn't need most of these
but it's annoying to have to fix them one by one.
Note that header installation strips this _UAPI prefix so this should
result in no change to the end user.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250416200840.1338195-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new protocol attribute to IPv4 and IPv6 addresses.
Inspiration was taken from the protocol attribute of routes. User space
applications like iproute2 can set/get the protocol with the Netlink API.
The attribute is stored as an 8-bit unsigned integer.
The protocol attribute is set by kernel for these categories:
- IPv4 and IPv6 loopback addresses
- IPv6 addresses generated from router announcements
- IPv6 link local addresses
User space may pass custom protocols, not defined by the kernel.
Grouping addresses on their origin is useful in scenarios where you want
to distinguish between addresses based on who added them, e.g. kernel
vs. user space.
Tagging addresses with a string label is an existing feature that could be
used as a solution. Unfortunately the max length of a label is
15 characters, and for compatibility reasons the label must be prefixed
with the name of the device followed by a colon. Since device names also
have a max length of 15 characters, only -1 characters is guaranteed to be
available for any origin tag, which is not that much.
A reference implementation of user space setting and getting protocols
is available for iproute2:
https://github.com/westermo/iproute2/commit/9a6ea18bd79f47f293e5edc7780f315ea42ff540
Signed-off-by: Jacques de Laval <Jacques.De.Laval@westermo.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220217150202.80802-1-Jacques.De.Laval@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds a new IFA_TARGET_NETNSID property to be used by address
families such as PF_INET and PF_INET6.
The IFA_TARGET_NETNSID property can be used to send a network namespace
identifier as part of a request. If a IFA_TARGET_NETNSID property is
identified it will be used to retrieve the target network namespace in
which the request is to be made.
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if two interfaces have addresses in the same connected route,
then the order of the prefix route entries is determined by the order in
which the addresses are assigned or the links brought up.
Add IFA_RT_PRIORITY to allow user to specify the metric of the prefix
route associated with an address giving interface managers better
control of the order of prefix routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
license
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to mark appropriate addresses so we can do retries in case their
DAD failed.
Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Joining multicast group on ethernet level via "ip maddr" command would
not work if we have an Ethernet switch that does igmp snooping since
the switch would not replicate multicast packets on ports that did not
have IGMP reports for the multicast addresses.
Linux vxlan interfaces created via "ip link add vxlan" have the group option
that enables then to do the required join.
By extending ip address command with option "autojoin" we can get similar
functionality for openvswitch vxlan interfaces as well as other tunneling
mechanisms that need to receive multicast traffic. The kernel code is
structured similar to how the vxlan driver does a group join / leave.
example:
ip address add 224.1.1.10/24 dev eth5 autojoin
ip address del 224.1.1.10/24 dev eth5
Signed-off-by: Madhu Challa <challa@noironetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding/modifying an IPv6 address, the userspace application needs
a way to suppress adding a prefix route. This is for example relevant
together with IFA_F_MANAGERTEMPADDR, where userspace creates autoconf
generated addresses, but depending on on-link, no route for the
prefix should be added.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
temporary addresses
Creating an address with this flag set will result in kernel taking care
of temporary addresses in the same way as if the address was created by
kernel itself (after RA receive). This allows userspace applications
implementing the autoconfiguration (NetworkManager for example) to
implement ipv6 addresses privacy.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no more space in u8 ifa_flags. So do what davem suffested and
add another netlink attr called IFA_FLAGS for carry more flags.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
|
