| Age | Commit message (Collapse) | Author |
|---|
|
syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE():
WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline]
WARNING: at udp_hdr include/linux/udp.h:23 [inline]
WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
Call trace:
skb_transport_header include/linux/skbuff.h:3087 [inline]
udp_hdr include/linux/udp.h:23 [inline]
do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
__traceiter_icmp_send include/trace/events/icmp.h:11 [inline]
__do_trace_icmp_send include/trace/events/icmp.h:11 [inline]
trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11
__icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013
ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline]
ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287
dst_link_failure include/net/dst.h:438 [inline]
vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307
TP_fast_assign() unconditionally calls udp_hdr(skb) before checking
whether the packet is UDP. Furthermore, __icmp_send() can be invoked
from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET)
where skb->transport_header was never initialized (~0U).
Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)).
Fix this by:
1. Only parsing transport info when iph->protocol == IPPROTO_UDP.
2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl << 2)
to safely fetch the UDP header without assuming transport_header is set.
Fixes: db3efdcf70c7 ("net/ipv4: add tracepoint for icmp_send")
Reported-by: syzbot+6d2762674103618994b0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a8d5538.91706f20.ef82.0009.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260825084551.1562967-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since BIG TCP for UDP tunnels will start using len=0 in the UDP header
as an indicator of a GSO packet bigger than 65535 bytes, this commit
introduces the following getter and setters to use tree-wide, in order
to explicitly mark places where len=0 may be expected, and handle them
properly:
1. udp_set_len() sets uh->len to its real value if it's not bigger than
65535, and to 0 otherwise: to be used in GSO context with aggregated
packets.
2. udp_set_len_short() is to be used when the length is known to fit 16
bits. It WARNs when the caller tries to assign a bigger value if
CONFIG_DEBUG_NET=y.
3. udp_get_len_short() returns len in host byte order: to be used on the
RX side to deal with non-aggregated packets, or to access the raw value
of the len field.
4. udp_get_len() decodes uh->len set by udp_set_len(). It checks whether
the packet is GSO to guard from malformed packets.
At the moment udp_set_len() is not used, a following commit will start
using it after enabling len>65535 for GSO.
Raw uh->len (in network byte order) is still accessed in a few places
for checksum calculation purposes, and to decode len=0 in udpv6_rcv for
jumbograms. udp_rcv and udpv6_rcv will be addressed by the commit that
starts using udp_set_len() to set UDP len=0 for BIG TCP packets in UDP
tunnels.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260710134242.216538-2-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a tracepoint for icmp_send, which can help users to get more
detail information conveniently when icmp abnormal events happen.
1. Giving an usecase example:
=============================
When an application experiences packet loss due to an unreachable UDP
destination port, the kernel will send an exception message through the
icmp_send function. By adding a trace point for icmp_send, developers or
system administrators can obtain detailed information about the UDP
packet loss, including the type, code, source address, destination address,
source port, and destination port. This facilitates the trouble-shooting
of UDP packet loss issues especially for those network-service
applications.
2. Operation Instructions:
==========================
Switch to the tracing directory.
cd /sys/kernel/tracing
Filter for destination port unreachable.
echo "type==3 && code==3" > events/icmp/icmp_send/filter
Enable trace event.
echo 1 > events/icmp/icmp_send/enable
3. Result View:
================
udp_client_erro-11370 [002] ...s.12 124.728002:
icmp_send: icmp_send: type=3, code=3.
From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
skbaddr=00000000589b167a
Signed-off-by: Peilin He <he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Liu Chun <liu.chun2@zte.com.cn>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
