| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- MediaTek MT6397: Add mt6323 AUXADC support
- MediaTek MT6397: Add mt6323 EFUSE support
- Spreadtrum SC27xx: Add SC2730 regulator cell
Improvements & Fixes:
- Apple SMC: Fix key count endianness annotation
- Azoteq IQS62x: Reject zero-length firmware records
- ChromeOS EC: Introduce cros_ec_read_features helper and read
features during probe to catch transfer errors
- Cirrus Logic CS42L43: Fix regmap defaults ordering
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire
- Congatec Board Controller: Fix teardown ordering in cgbc_remove()
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str
- Marvell 88PM886: Initialize the battery page
- QNAP MCU: Keep the reply buffer alive past a command timeout
- RAVE SP: Validate received frame payload lengths
- Silicon Labs Si476x: Drop duplicate NULL checks
- Silicon Labs Si476x: Modernize GPIO handling
- Silicon Motion SM501: Fix potential memory leaks during remove
- UCB1x00: Convert Assabet gpio-keys to use software nodes and
register software node for GPIO controller
- Viperboard: Fix native fields type in structures as little-endian
- Viperboard: Remove redundant NULL check before kfree()
- X-Powers AXP20x: Preserve other control bits when powering off
Cleanups & Refactoring:
- Core: Drop unused assignment of spi_device_id driver data
- Core: Initialize spi_device_id arrays using member names
- Core: Unify style of spi_device_id arrays
- Maintainers: Add Intel LPSS section to follow the changes
- Maintainers: Add a mailing list entry to MFD
- Cirrus Logic CS42L43: Format sdw_device_id table
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper
- ROHM PMIC: Factor out power button registration and convert
gpio-keys to use software nodes
- ST-Ericsson DB8500: Fold dbx500 header into db8500
Device Tree Binding Updates:
- Core: Add techvision vendor prefix
- Marvell 88PM886: Allow vbus regulator
- MediaTek MT8195 SCP: Add support for MT8189 SoC
- Qualcomm SPMI PMIC: Document PMG1110
- Qualcomm SPMI PMIC: Document haptics device
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs
- Qualcomm TCSR: Add compatible for Shikra
- Qualcomm TCSR: Document the IPQ9650 TCSR block
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be
st,stmpe610)
- Syscon: Add ESWIN EIC7700 compatible
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id
- Syscon: Disallow simple-bus with syscon
- Syscon: Drop custom select for older dtschema
- TI OMAP USBHS TLL: Convert to DT schema"
* tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cs42l43: Fix regmap defaults ordering
dt-bindings: mfd: syscon: Allow syscon compatible for Loongson-2K0300 chip id
dt-bindings: mfd: syscon: Add ESWIN EIC7700 compatible
mfd: qnap-mcu: keep the reply buffer alive past a command timeout
dt-bindings: mfd: qcom,tcsr: Document the IPQ9650 TCSR block
mfd: macsmc: Fix key count endianness annotation
dt-bindings: mfd: qcom,spmi-pmic: Document haptics device
mfd: iqs62x: Reject zero-length firmware records
mfd: rave-sp: validate received frame payload lengths
mfd: sm501: Fix potential memory leaks during remove
mfd: viperboard: Fix native fields type in structures as little-endian
mfd: si476x-i2c: Get rid of duplicate NULL checks
dt-bindings: mfd: Convert OMAP USB TLL to DT schema
mfd: cgbc: Fix teardown ordering in cgbc_remove()
mfd: mt6397-core: Add mt6323 AUXADC support
dt-bindings: mfd: qcom,tcsr: Add compatible for Hawi and Maili SoCs
mfd: rohm: Factor out power button registration
mfd: ucb1x00: Convert Assabet gpio-keys to use software nodes
mfd: ucb1x00: Register software node for GPIO controller
mfd: cs42l43: Tidy up formatting on sdw_device_id table
...
|
|
Define a static software node for the UCB1x00 GPIO controller and attach
it to the core MFD device in ucb1x00_probe(). This node will also be
used by the created GPIO chip.
This allows machine subdrivers (such as Assabet evaluation board
support) to reference the UCB1x00 GPIO controller in property entries
when converting legacy platform data to software nodes, resolving pin
bindings directly via the attached firmware node without relying on
name matching.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-ucb1x00-assabet-swnode-v2-1-e6271ea3d3dc@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Almost all gpio drivers include linux/gpio/driver.h, and other
files should not rely on includes from this header.
Remove the indirect include from here and include the correct
headers directly from where they are used.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lee Jones <lee@kernel.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 24 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes this compilation error:
linux/include/linux/mfd/ucb1x00.h:137:17: error: field 'dev' has incomplete type
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
Add genirq wakeup support for the ucb1x00 device. This allows an
attached gpio_keys driver to wakeup the system. Touchscreen is also
possible.
When there are no wakeup sources, ask the platform to assert the reset
signal to avoid any unexpected behaviour; this also puts the reset
signal at the right level when power is removed from the device.
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Convert the ucb1x00 driver to use genirq's interrupt services, rather
than its own private implementation. This allows a wider range of
drivers to use the GPIO interrupts (such as the gpio_keys driver)
without being aware of the UCB1x00's private IRQ system.
This prevents the UCB1x00 core driver from being built as a module,
so adjust the configuration to add that restriction.
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Convert the ucb1x00-core driver to use dev_pm_ops rather than the legacy
members in the mcp driver.
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Convert the ucb1x00 driver to use mutexes rather than the depreciated
semaphores for exclusive access to the ADC.
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Provide a way to handle the software controlled ucb1x00 reset signal
from the ucb1x00-core driver without having to code platform specifics
into these drivers.
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Patch taken from 5dd7bf59e0 (ARM: sa11x0: Implement autoloading of codec
and codec pdata for mcp bus.) by Jochen Friedrich <jochen@scram.de>.
This adds just the codec data part of the patch.
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
bus."
This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7.
Conflicts:
scripts/mod/file2alias.c
This change is wrong on many levels. First and foremost, it causes a
regression. On boot on Assabet, which this patch gives a codec id of
'ucb1x00', it gives:
ucb1x00 ID not found: 1005
0x1005 is a valid ID for the UCB1300 device.
Secondly, this patch is way over the top in terms of complexity. The
only device which has been seen to be connected with this MCP code is
the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same
driver. Adding a match table, requiring the codec string to match the
hardware ID read out of the ID register, etc is completely over the top
when we can just read the hardware ID register.
|
|
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
This patch fixes a build failure[1], by adding the missing semaphore.h include
References:
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/2234322/
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
The old access methods to the gpios will be removed when
all users has been converted. (mainly ucb1x00-ts)
|
|
So drivers like collie_battery driver can use
those files easier.
|
