| Age | Commit message (Collapse) | Author |
|---|
|
If nfs4_pnfs_ds_connect() is interrupted by a signal,
nfs4_ff_layout_prepare_ds() records an NFS4ERR_NXIO error for the data
server, sends a LAYOUTERROR to the MDS and may mark the layout for
return. The data server is healthy in this case; only the calling task
was killed.
A bpftrace log of a killed task shows the connect failing with
-ERESTARTSYS, followed by a LAYOUTERROR for a data server that completed
the TCP handshake with the same client microseconds later (time in
microseconds, abridged):
python3 rpc_create (ret) 1xx.yy.50.179:24009 err=-512
kworker inet_sock_set_state :735 -> 1xx.yy.50.179:24009 CLOSE -> SYN_SENT
swapper inet_sock_set_state :735 -> 1xx.yy.50.179:24009 SYN_SENT -> ESTABLISHED
kworker inet_sock_set_state :735 -> 1xx.yy.50.179:24009 ESTABLISHED -> FIN_WAIT1
python3 nfs4_pnfs_ds_connect (ret) status=-512
python3 nfs4_ff_layout_prepare_ds (ret) err=-512
kworker rpc_request nfs v4 LAYOUTERROR async task=3/6752
kworker rpc_stats_latency LAYOUTERROR backlog=66us rtt=315us exec=421us
Return the error to the caller without reporting a DS failure when the
connect ended with -ERESTARTSYS or -EINTR.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
fix mismatch between function doc description and actual code
introduced in commit f06bedfa62d5 ("pNFS/flexfiles: don't attempt
pnfs on fatal DS errors")
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
When an error causes the flexfiles driver to return a layout,
ff_layout_cancel_io() kills every in-flight RPC for the layout
segment, across all mirror instances. Cancelled requests that had
already been transmitted to a healthy data server cannot be un-sent:
they complete on the data server after the client has sent its
LAYOUTRETURN, and the metadata server then observes writes to a file
for which no write layout is outstanding.
RFC 8881 Section 20.3.4 recommends that the client wait for the
response from in-process or in-flight READ, WRITE, or COMMIT
operations before returning the layout, and the machinery for that
wait already exists: the LAYOUTRETURN is deferred until every request
drops its layout segment reference, and requests that have not yet
been transmitted exit at RPC prepare time once the segment has been
invalidated. Cancellation is only needed to avoid waiting forever on
a device that will never answer.
Pass the failed instance's device ID when marking the layout for
return, so that ff_layout_cancel_io() cancels only I/O directed at
the device we have given up on. In-flight I/O to the remaining
healthy instances drains normally -- typically within a round trip --
before the LAYOUTRETURN is sent. If a spared instance turns out to
be unresponsive, its requests fail with their own device error, and
the resulting layout return cancels its I/O in turn.
Layout recalls with clora_changed set, bulk returns, and layout
revocations continue to cancel I/O to every device, as do error
paths where no single failed device can be identified.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
The ->cancel_io() layout operation cancels all in-flight I/O for a
layout segment that is being returned. When the return is triggered
by the failure of a single mirror instance, cancelling I/O to the
healthy mirrors is both unnecessary and harmful: requests that were
already transmitted cannot be un-sent, and will complete on the data
servers after the layout has been returned.
Give ->cancel_io() a device ID argument identifying the failed device,
and thread it through pnfs_error_mark_layout_for_return() and
pnfs_mark_matching_lsegs_return(). The flexfiles implementation
compares it against the raw device ID from the layout, so that it can
identify the failed mirror instance even when its device ID node was
never instantiated.
A NULL device ID preserves the existing cancel-everything behavior,
and all callers pass NULL for now, so this patch makes no change in
behavior.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
When nfs4_ff_layout_prepare_ds() cannot establish a connection to a
data server, it records a device error with opnum OP_ILLEGAL, since no
operation ever made it to the wire. But servers can use the ff_ioerr4
opnum to distinguish failed read-class operations from write-class
operations when deciding how to recover the affected mirror -- a mirror
that may have missed writes needs to be brought back in sync, while one
that merely failed to serve a read does not. OP_ILLEGAL gives the
server nothing to act on.
Every caller of nfs4_ff_layout_prepare_ds() knows which operation it
was preparing to send, and the existing fail_return argument already
divides the callers along the same boundary (false for READ, true for
WRITE and COMMIT). Replace the boolean with the intended opnum, derive
the layout return decision from it, and report it in the tracked device
error instead of OP_ILLEGAL.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
Data-server clients inherit the MDS nconnect setting. A striping
mount multiplies that by every distinct data server: at the
anticipated scale of 1024 and nconnect=16 the client opens 16k
sockets plus their sunrpc slot tables, and striping already spreads
I/O across the data servers, so a high per-DS transport count buys
little for that workload.
Add a dataserver_nconnect module parameter to the flexfiles layout
driver alongside its existing dataserver_timeo and dataserver_retrans
knobs, and thread the value through nfs4_pnfs_ds_connect() to both
the v3 and v4 data-server client setup paths. The default of 0
preserves today's inherit-from-MDS behavior, so the cap is opt-in
and non-regressing. The files layout passes 0, unchanged.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
Annotate mirror->dss[dss_id].mirror_ds as __rcu and convert the
remaining readers, completing the preparation for re-pointing the pinned
node while I/O is in flight:
- ff_layout_get_mirror_ds() takes its reference under rcu_read_lock()
with atomic_inc_not_zero(), retrying if it races a reset. The
resolve path takes the caller's reference before publishing the node
with cmpxchg(), so a concurrent reset cannot drop the last reference
under the caller: one reference is held for the installed pointer and
one for the caller, and the pointer's reference is released elsewhere
by xchg + put.
- The availability scans hold rcu_read_lock() across the walk; they
only test flags on the RCU-freed node.
- ff_layout_cancel_io() holds a reference across the cancel and
disconnect calls. Both of its callers hold i_lock and nothing on
that path sleeps, so the reference is not about blocking: it is
what keeps the node alive between the RCU-protected read and the
use of mirror_ds->ds. The final put is never reached here, because
the mirror's own pin outlives the loop -- which matters, since that
put ends in nfs_put_client() and cannot run under a spinlock.
- ff_layout_mirror_prepare_stats() reads the pointer with
rcu_dereference() under rcu_read_lock(). i_lock, which both callers
hold, is what excludes the re-pointing walk added later in this
series; it does not exclude the resolve path's cmpxchg(), which runs
from I/O submission, so the read cannot claim i_lock as its update-
side lock. A non-NULL pointer read there is stable regardless: the
resolve path only ever installs over NULL.
- ff_layout_free_mirror() tears down the last reference; no concurrency.
The pointer is still only ever set once per mirror lifetime, so there is
no behavior change; this commit makes the subsequent in-place re-resolve
on CB_NOTIFY_DEVICEID CHANGE safe to introduce.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
Rather than dropping the device node reference when DS setup completes,
transfer it to the in-flight I/O: carry it on nfs_pgio_header and
nfs_commit_data as ds_dev, and release it when the header or commit
data is released, alongside the lseg reference.
Convert the completion paths to use the carried node instead of
re-reading the mirror's pinned pointer: DS error tracking, marking the
deviceid available/unavailable, and deleting the deviceid on connection
errors now act on the node the I/O was actually sent to. Once a CHANGE
notification can re-point the pinned pointer mid-flight, this keeps
error attribution on the old device rather than its replacement (and
removes a NULL dereference had the pointer been reset to NULL).
FF_LAYOUT_DEVID_NODE() is now unused; remove it.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
The flexfiles I/O setup paths read the mirror's pinned per-stripe device
node (mirror->dss[dss_id].mirror_ds) repeatedly and locklessly, relying
on the mirror's lifetime pin. To prepare for re-resolving that pointer
in place on CB_NOTIFY_DEVICEID CHANGE, readers must hold their own
reference on the node they are using rather than trusting the pin.
Replace ff_layout_init_mirror_ds() with ff_layout_get_mirror_ds(), which
resolves on first use as before but returns the node with its own
reference held. Thread the referenced node through
nfs4_ff_layout_prepare_ds() and the DS selection helpers so each setup
path snapshots the node once, and drop the reference when setup is done.
No functional change: the pointer is still resolved once and pinned for
the life of the mirror. Each reference this adds is released on every
exit from the path that took it, error paths included.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
nfs4_pnfs_ds_addr_free() releases all three of an address entry's
allocations, but the four sites that drain a decoded list before it
reaches a data server open-code the loop and free only da_remotestr and
the entry, leaking da_netid. Both layout drivers drain that list when
nfs4_pnfs_ds_add() returned a data server already in the cache, and
again on their error exits.
Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has
one owner. A striping mount reaches the cached case on nearly every
GETDEVICEINFO, since many deviceIDs name the same data servers.
Fixes: 4be78d26810b ("NFSv4/pNFS: Store the transport type in struct nfs4_pnfs_ds_addr")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath
address set alone, and struct nfs4_pnfs_ds records no version. That
suffices for the files layout driver, which always connects with version
4, but flexfiles takes its version tuple from GETDEVICEINFO per device,
and one address can legitimately serve both NFSv3 and NFSv4.
Two deviceids on one address with different ds_versions[0].version
therefore share a single nfs4_pnfs_ds, and whichever mirror connects
first pins ds_clp to its own version. The other one is handed that
client anyway, so it selects rpc_call_ops for a version the connection
does not speak, and the mismatched sequence-slot handling dereferences
NULL.
Add the version to the cache key so the two cannot alias, giving each
version its own nfs4_pnfs_ds and connection while both mirrors stay
usable. Only the major version is compared, since that is what selects
rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files
layout driver passes the 4 it already hardcodes at connect time.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
A flexfiles storage device is tightly coupled to the MDS only when the
decoded ds_versions[0].tightly_coupled flag is set (RFC 8435, sections
2.3 and 4.1). The client currently ignores that flag and treats every
data server as tightly coupled, which breaks I/O to loosely coupled DSes.
Two things force that assumption on an NFSv4.1+ DS:
1) nfs4_set_ds_client() always sets NFS_CS_PNFS on the new client, so
EXCHANGE_ID is sent with EXCHGID4_FLAG_USE_PNFS_DS.
2) nfs4_init_ds_session() then calls is_ds_client() and returns -ENODEV
if the reply does not carry EXCHGID4_FLAG_USE_PNFS_DS.
A loosely coupled DS is just a normal NFS server and does not act in the
pNFS DS role, so the client must not require it to advertise that role.
Thread the ds_versions[0].tightly_coupled flag from the flexfiles driver
down to the DS connect path. When it is false, skip both the NFS_CS_PNFS
flag and the is_ds_client() check. The file layout driver always passes
true because NFSv4.1 file layout data servers use the pNFS DS role.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
nfs4_ff_alloc_deviceid_node() reads version_count from XDR without
checking it is non-zero. When a malicious NFS server sends a pNFS
LAYOUTGET response with version_count=0, kcalloc(0, ...) returns
ZERO_SIZE_PTR (0x10). The subsequent ds_versions[0] access in
nfs4_ff_layout_ds_version() and other callers dereferences this
invalid pointer, causing an out-of-bounds read.
Add a check for version_count == 0 after parsing it from XDR, before
the allocation.
The OOB read was confirmed with KASAN: null-ptr-deref in range
[0x0000000000000010-0x0000000000000017] from accessing ZERO_SIZE_PTR.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Tested-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails,
the function jumps to the out_scratch label without freeing the already
allocated dsaddrs list, leading to a memory leak.
Fix this by jumping to the out_err_drain_dsaddrs label, which properly
frees the dsaddrs list before cleaning up other resources.
Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Updates common helper functions to be dss_id aware. Most cases simply
add a dss_id parameter. The has_available functions have been updated
with a loop.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Adds a new struct nfs4_ff_layout_ds_stripe that represents a data
server stripe within a layout. A new dynamically allocated array of
this type has been added to nfs4_ff_layout_mirror and per stripe
configuration information has been moved from the mirror type to the
stripe based on the RFC.
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
When an applications get killed (SIGTERM/SIGINT) while pNFS client performs a connection
to DS, client ends in an infinite loop of connect-disconnect. This
source of the issue, it that flexfilelayoutdev#nfs4_ff_layout_prepare_ds gets an error
on nfs4_pnfs_ds_connect with status ERESTARTSYS, which is set by rpc_signal_task, but
the error is treated as transient, thus retried.
The issue is reproducible with Ctrl+C the following script(there should be ~1000 files in
a directory, client should must not have any connections to DSes):
```
echo 3 > /proc/sys/vm/drop_caches
for i in *
do
head -1 $i
done
```
The change aims to propagate the nfs4_ff_layout_prepare_ds error state
to the caller that can decide whatever this is a retryable error or not.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Link: https://lore.kernel.org/r/20250627071751.189663-1-tigran.mkrtchyan@desy.de
Fixes: 260f32adb88d ("pNFS/flexfiles: Check the result of nfs4_pnfs_ds_connect")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
It was reported that NFS client mounts of AWS Elastic File System
(EFS) volumes is slow, this is because the AWS firewall disallows
LOCALIO (because it doesn't consider the use of NFS_LOCALIO_PROGRAM
valid), see: https://bugzilla.redhat.com/show_bug.cgi?id=2335129
Switch to performing the LOCALIO probe asynchronously to address the
potential for the NFS LOCALIO protocol being disallowed and/or slowed
by the remote server's response.
While at it, fix nfs_local_probe_async() to always take/put a
reference on the nfs_client that is using the LOCALIO protocol.
Also, unexport the nfs_local_probe() symbol and make it private to
fs/nfs/localio.c
This change has the side-effect of initially issuing reads, writes and
commits over the wire via SUNRPC until the LOCALIO probe completes.
Suggested-by: Jeff Layton <jlayton@kernel.org> # to always probe async
Fixes: 76d4cb6345da ("nfs: probe for LOCALIO when v4 client reconnects to server")
Cc: stable@vger.kernel.org # 6.14+
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Currently, different NFS clients can share the same DS connections, even
when they are in different net namespaces. If a containerized client
creates a DS connection, another container can find and use it. When the
first client exits, the connection will close which can lead to stalls
in other clients.
Add a net namespace pointer to struct nfs4_pnfs_ds, and compare those
value to the caller's netns in _data_server_lookup_locked() when
searching for a nfs4_pnfs_ds to match.
Reported-by: Omar Sandoval <osandov@osandov.com>
Reported-by: Sargun Dillon <sargun@sargun.me>
Closes: https://lore.kernel.org/linux-nfs/Z_ArpQC_vREh_hEA@telecaster/
Tested-by: Sargun Dillon <sargun@sargun.me>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/20250410-nfs-ds-netns-v2-1-f80b7979ba80@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the DS is local to this client use localio to write the data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Previously, we required this to value to be a power of 2 for UDP related
reasons. This patch keeps the power of 2 rule for UDP but allows more
flexibility for TCP and RDMA.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
_nfs4_pnfs_v3/v4_ds_connect do
some work
smp_wmb
ds->ds_clp = clp;
And nfs4_ff_layout_prepare_ds currently does
smp_rmb
if(ds->ds_clp)
...
This patch places the smp_rmb after the if. This ensures that following
reads only happen once nfs4_ff_layout_prepare_ds has checked that data
has been properly initialized.
Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Clean up: De-duplicate some frequently-used code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
mirror->mirror_ds can be NULL if uninitialised, but can contain
a PTR_ERR() if call to GETDEVICEINFO failed.
Fixes: 65990d1afbd2 ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # 4.10+
|
|
Fix a typo where we're confusing the default TCP retrans value
(NFS_DEF_TCP_RETRANS) for the default TCP timeout value.
Fixes: 15d03055cf39f ("pNFS/flexfiles: Set reasonable default ...")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Get rid of the redundant parameter and rename the function
ff_layout_mirror_valid() to ff_layout_init_mirror_ds() for clarity.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
nfs4_ff_alloc_deviceid_node() guarantees that if mirror->mirror_ds is
a valid pointer, then so is mirror->mirror_ds->ds.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pass in a pointer to the mirror rather than forcing another
array access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pass in a pointer to the mirror rather than forcing another
array access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pass in a pointer to the mirror rather than forcing another
array access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pass in a pointer to the mirror rather than having to retrieve it from
the array and then verify the resulting pointer.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the DS is unresponsive, we want to just mark it as such, while
reporting the errors. If the server later returns the same deviceid
in a new layout, then we don't want to have to look it up again.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
In ff_layout_mirror_valid() we may not want to invalidate the layout
segment despite the call to GETDEVICEINFO failing. The reason is that
a read may still be able to make progress on another mirror.
So instead we let the caller (in this case nfs4_ff_layout_prepare_ds())
decide whether or not it needs to invalidate.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
While we may want to skip attempting to connect to a downed mirror
when we're deciding which mirror to select for a read, we do not
want to do so once we've committed to attempting the I/O in
ff_layout_read/write_pagelist(), or ff_layout_initiate_commit()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When a read to the preferred mirror returns an error, the flexfiles
driver records the error in the inode list and currently marks the
layout for return before failing over the attempted read to the next
mirror.
What we actually want to do is fire off a LAYOUTERROR to notify the
MDS that there is an issue with the preferred mirror, then we fail
over. Only once we've failed to read from all mirrors should we
return the layout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Fix up some compiler warnings about function parameters, etc not being
correctly described or formatted.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
SUNRPC has two sorts of credentials, both of which appear as
"struct rpc_cred".
There are "generic credentials" which are supplied by clients
such as NFS and passed in 'struct rpc_message' to indicate
which user should be used to authorize the request, and there
are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS
which describe the credential to be sent over the wires.
This patch replaces all the generic credentials by 'struct cred'
pointers - the credential structure used throughout Linux.
For machine credentials, there is a special 'struct cred *' pointer
which is statically allocated and recognized where needed as
having a special meaning. A look-up of a low-level cred will
map this to a machine credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rfc8435 says:
For tight coupling, ffds_stateid provides the stateid to be used by
the client to access the file.
However current implementation replaces per-mirror provided stateid with
by open or lock stateid.
Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and
nfs4_ff_layout_prepare_ds.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
for tightly coupled DSes client must ignore provided synthetic uid and
gid as stated in draft-ietf-nfsv4-flex-files-19#section-5.1.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The client was freeing the nfs4_ff_layout_ds, but not the contained
nfs4_ff_ds_version array.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The check in nfs4_ff_layout_prepare_ds() seems to be missing.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: a33e4b036d461 ("pNFS: return status from nfs4_pnfs_ds_connect")
Cc: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # v4.11
|
|
Flexfilelayout supports data servers which talk NFS v3 and v4.{0,1,2}.
However, this code path is disabled and v3 only servers are accepted.
This change removes this limitation.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
this fix aims to fix dereferencing of a mirror in an error state when MDS
returns unsupported DS type (IOW, not v3), which causes the following oops:
[ 220.370709] BUG: unable to handle kernel NULL pointer dereference at 0000000000000065
[ 220.370842] IP: ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles]
[ 220.370920] PGD 0
[ 220.370972] Oops: 0000 [#1] SMP
[ 220.371013] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security ebtable_filter ebtables ip6table_filter ip6_tables binfmt_misc intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel btrfs kvm arc4 snd_hda_codec_hdmi iwldvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate mac80211 xor uvcvideo
[ 220.371814] videobuf2_vmalloc videobuf2_memops snd_hda_codec_idt mei_wdt videobuf2_v4l2 snd_hda_codec_generic iTCO_wdt ppdev videobuf2_core iTCO_vendor_support dell_rbtn dell_wmi iwlwifi sparse_keymap dell_laptop dell_smbios snd_hda_intel dcdbas videodev snd_hda_codec dell_smm_hwmon snd_hda_core media cfg80211 intel_uncore snd_hwdep raid6_pq snd_seq intel_rapl_perf snd_seq_device joydev i2c_i801 rfkill lpc_ich snd_pcm parport_pc mei_me parport snd_timer dell_smo8800 mei snd shpchp soundcore tpm_tis tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 nouveau mxm_wmi ttm i2c_algo_bit drm_kms_helper crc32c_intel e1000e drm sdhci_pci firewire_ohci sdhci serio_raw mmc_core firewire_core ptp crc_itu_t pps_core wmi fjes video
[ 220.372568] CPU: 7 PID: 4988 Comm: cat Not tainted 4.10.5-200.fc25.x86_64 #1
[ 220.372647] Hardware name: Dell Inc. Latitude E6520/0J4TFW, BIOS A06 07/11/2011
[ 220.372729] task: ffff94791f6ea580 task.stack: ffffb72b88c0c000
[ 220.372802] RIP: 0010:ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles]
[ 220.372883] RSP: 0018:ffffb72b88c0f970 EFLAGS: 00010246
[ 220.372945] RAX: 0000000000000000 RBX: ffff9479015ca600 RCX: ffffffffffffffed
[ 220.373025] RDX: ffffffffffffffed RSI: ffff9479753dc980 RDI: 0000000000000000
[ 220.373104] RBP: ffffb72b88c0f988 R08: 000000000001c980 R09: ffffffffc0ea6112
[ 220.373184] R10: ffffef17477d9640 R11: ffff9479753dd6c0 R12: ffff9479211c7440
[ 220.373264] R13: ffff9478f45b7790 R14: 0000000000000001 R15: ffff9479015ca600
[ 220.373345] FS: 00007f555fa3e700(0000) GS:ffff9479753c0000(0000) knlGS:0000000000000000
[ 220.373435] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 220.373506] CR2: 0000000000000065 CR3: 0000000196044000 CR4: 00000000000406e0
[ 220.373586] Call Trace:
[ 220.373627] nfs4_ff_layout_prepare_ds+0x5e/0x200 [nfs_layout_flexfiles]
[ 220.373708] ff_layout_pg_init_read+0x81/0x160 [nfs_layout_flexfiles]
[ 220.373806] __nfs_pageio_add_request+0x11f/0x4a0 [nfs]
[ 220.373886] ? nfs_create_request.part.14+0x37/0x330 [nfs]
[ 220.373967] nfs_pageio_add_request+0xb2/0x260 [nfs]
[ 220.374042] readpage_async_filler+0xaf/0x280 [nfs]
[ 220.374103] read_cache_pages+0xef/0x1b0
[ 220.374166] ? nfs_read_completion+0x210/0x210 [nfs]
[ 220.374239] nfs_readpages+0x129/0x200 [nfs]
[ 220.374293] __do_page_cache_readahead+0x1d0/0x2f0
[ 220.374352] ondemand_readahead+0x17d/0x2a0
[ 220.374403] page_cache_sync_readahead+0x2e/0x50
[ 220.374460] generic_file_read_iter+0x6c8/0x950
[ 220.374532] ? nfs_mapping_need_revalidate_inode+0x17/0x40 [nfs]
[ 220.374617] nfs_file_read+0x6e/0xc0 [nfs]
[ 220.374670] __vfs_read+0xe2/0x150
[ 220.374715] vfs_read+0x96/0x130
[ 220.374758] SyS_read+0x55/0xc0
[ 220.374801] entry_SYSCALL_64_fastpath+0x1a/0xa9
[ 220.374856] RIP: 0033:0x7f555f570bd0
[ 220.374900] RSP: 002b:00007ffeb73e1b38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 220.374986] RAX: ffffffffffffffda RBX: 00007f555f839ae0 RCX: 00007f555f570bd0
[ 220.375066] RDX: 0000000000020000 RSI: 00007f555fa41000 RDI: 0000000000000003
[ 220.375145] RBP: 0000000000021010 R08: ffffffffffffffff R09: 0000000000000000
[ 220.375226] R10: 00007f555fa40010 R11: 0000000000000246 R12: 0000000000022000
[ 220.375305] R13: 0000000000021010 R14: 0000000000001000 R15: 0000000000002710
[ 220.375386] Code: 66 66 90 55 48 89 e5 41 54 53 49 89 fc 48 83 ec 08 48 85 f6 74 2e 48 8b 4e 30 48 89 f3 48 81 f9 00 f0 ff ff 77 1e 48 85 c9 74 15 <48> 83 79 78 00 b8 01 00 00 00 74 2c 48 83 c4 08 5b 41 5c 5d c3
[ 220.375653] RIP: ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles] RSP: ffffb72b88c0f970
[ 220.375748] CR2: 0000000000000065
[ 220.403538] ---[ end trace bcdca752211b7da9 ]---
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The flexfiles layout should never mark a device unavailable.
Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call
directly from files layout where it's still needed.
The flexfiles driver still handles marked devices in error paths, but will
now print a rate limited warning.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it
can wait on another context to reach the same failure.
This checks that the rpc_create succeeded and returns the error to the
caller.
When an error is returned, both the files and flexfiles layouts will return
NULL from _prepare_ds(). The flexfiles layout will also return the layout
with the error NFS4ERR_NXIO.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Instead of marking a device inactive, remove it from the cache entirely.
Flexfiles has a way to report errors back to the server, so we don't want
to stop devices from being tried again for 120 seconds.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
