| Age | Commit message (Collapse) | Author |
|---|
|
Pull SCSI updates from James Bottomley:
"Small number of driver updates (mpi3mr, ufs, scsi_debug).
By far the biggest core change (at 4000+ lines) is the sense code
rework to make our sense handling follow the 16 bit defines in the
SCSI standard rather than our split ASC and ASCQ handling which ends
up being confusing and difficult to grep.
The changes should all be functionally equivalent and so far the bots
and AI seem to agree; the code has been incubating in -next since 16
September with one reported issue fixed.
The remaining updates are minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits)
scsi: ufs: rpmb: Fix power-on UNIT ATTENTION retry
scsi: bfa: Use snprintf() in bfa_fcs_fabric_psymb_init()
scsi: bfa: Use snprintf() in bfa_fcs_fabric_nsymb_init()
scsi: MAINTAINERS: Remove Avri Altman as UFS reviewer
scsi: st: Relock the door after a reset
scsi: st: Restore the drive buffering mode after reset
scsi: st: Record the tape position after a successful MTLOAD
scsi: st: Restore changed drive settings after reset also for MTLOAD and MTRETEN
scsi: scsi_debug: Validate the access parameters of WRITE ATOMIC (16)
scsi: scsi_debug: Map the region written by WRITE ATOMIC (16)
scsi: scsi_debug: Refuse a short WRITE ATOMIC (16) before writing it
scsi: scsi_debug: Advance the write pointer over the data written
scsi: scsi_debug: Do not write a partial physical block to a zoned device
scsi: scsi_debug: Enforce physical block alignment of zoned writes
scsi: scsi_debug: Report the residual of a write
scsi: scsi_debug: Avoid 32-bit overflow in WRITE SCATTERED offsets
scsi: scsi_debug: Evaluate scsi_debug_lbp() only once
scsi: scsi_debug: Take the zone metadata lock before the data lock
scsi: scsi_debug: Refuse a negative physblk_exp
scsi: scsi_debug: Make atomic writes and ZBC emulation mutually exclusive
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Mostly small driver fixes. The biggest fix is the one to the block
zone handling which might trip for real or virtual hardware if the
number of zones is > 2^32"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Protect megasas_get_ctrl_info() in megasas_resume()
scsi: sd_zbc: Reject disks with too many zones
scsi: block: Fix zones_cond out-of-bounds write on zone report
scsi: leapraid: Avoid -Wformat-security warning
scsi: devinfo: Add BLIST_SKIP_IO_HINTS for EMC Symmetrix
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
scsi: ufs: pltfrm: Add quirk for R-Car S4 lacking lanes-per-direction
scsi: ufs: core: Keep internal commands dispatchable during error handling
|
|
Merge Linux 7.3-rc2 to resolve libata and mpi3mr merge conflicts.
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Conflicts:
drivers/ata/libata-scsi.c
drivers/scsi/mpi3mr/mpi3mr_transport.c
|
|
Refactor the leapraid driver to use the 16-bit sense_code field of struct
scsi_sense_hdr and replace all hard-coded additional sense codes and
additional sense code qualifiers with the enum values defined in
include/scsi/scsi_sense.h. This helps with code clarity as the sense codes
being processed are easier to test and self-documented.
With this change, the locally defined macros for ASC and ASCQ values are
deleted.
No functional change intended.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260908090308.1085097-21-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
When extra warnings are enabled, the alloc_ordered_workqueue() function
cannot be called with a variable name for the format string:
drivers/scsi/leapraid/leapraid_os.c: In function 'leapraid_probe':
drivers/scsi/leapraid/leapraid_os.c:2062:58: error: format not a string literal and no format arguments [-Werror=format-security]
2062 | alloc_ordered_workqueue(adapter->fw_evt_s.fw_evt_name, 0);
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
As the string is only assembled before the call and not used anywhere else,
just fold the earlier snprintf() into the alloc_ordered_workqueue() call.
Fixes: 5597088c9e79 ("scsi: leapraid: Add new SCSI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260915202134.3534708-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
Replace the earlier LeapRAID ncq_cmd_prio_enable attribute with the
standard sas_ncq_prio_supported and sas_ncq_prio_enable names documented in
Documentation/ABI/testing/sysfs-block-device, and rename the per-device NCQ
priority state to match.
The earlier ncq_cmd_prio_enable name has not yet been established as part
of a released userspace ABI, so no compatibility alias is needed.
For LeapRAID, sas_ncq_prio_enable is backed by the driver's per-device NCQ
priority state and controls whether RT-class I/O requests are issued with
command priority on supported SATA devices.
Update leapraid.rst to describe the standard attribute names and paths, and
clean up the surrounding RST text for consistency with kernel documentation
style.
Also switch the capability check from open-coded VPD page 0x89 parsing to
sas_ata_ncq_prio_supported(), use kstrtobool() for the enable path, and
expose the NCQ priority attributes only for SATA devices using LeapRAID's
target-private SAS device state.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Dongdong Hao <doubled@leap-io-kernel.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260814090526.395704-1-doubled@leap-io-kernel.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
leapraid_fw_log_exit() waits for mmap_refcnt to reach zero before it frees
the firmware log buffer. leapraid_fw_mmap() checks host_removing, but it
does not increment mmap_refcnt until after dma_mmap_coherent() succeeds and
the VMA open callback runs.
Removal can set host_removing and observe a zero mmap_refcnt between the
check and the VMA open. It can then free the coherent buffer while the
mmap path is still establishing a userspace mapping of it.
Claim a temporary mmap reference while looking up the adapter under
leapraid_adapter_lock. Removal deletes the adapter from the same locked
list after setting host_removing, so a mapping is either rejected or
included in the count that removal waits for. Drop the temporary reference
on the common exit path, after a successful VMA open has acquired the
reference covering the VMA lifetime.
Fixes: 5597088c9e79 ("scsi: leapraid: Add new SCSI driver")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Dongdong Hao <doubled@leap-io-kernel.com>
Link: https://patch.msgid.link/20260814033845.2971706-3-lilinmao@kylinos.cn
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
leapraid_fw_mmap() keeps the Scsi_Host reference obtained while looking up
the adapter for the lifetime of the initial VMA. The VMA close callback
drops that reference.
The open callback is also invoked when a VMA is duplicated or split, but it
only increments mmap_refcnt. Since every corresponding close callback
drops a host reference, cloning the mapping can release the host while
another VMA still refers to the adapter.
Take a host device reference for every VMA open and release the lookup
reference once the initial mapping has acquired its own reference. Use
get_device() because a VMA can be cloned after the host enters SHOST_DEL;
an existing VMA still pins the host at that point and open cannot fail.
Fixes: 5597088c9e79 ("scsi: leapraid: Add new SCSI driver")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Dongdong Hao <doubled@leap-io-kernel.com>
Link: https://patch.msgid.link/20260814033845.2971706-2-lilinmao@kylinos.cn
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
Some but not all SCSI host state changes are protected with the SCSI
host lock. Annotate the SCSI host state with __guarded_by(host_lock) and
protect all SCSI host state changes with the SCSI host lock. This patch
prevents that KCSAN complains about data races when accessing the SCSI
host state.
Reported-by: Jianzhou Zhao <luckd0g@163.com>
Closes: https://lore.kernel.org/all/36d59d0e.6db0.19cdbeee01b.Coremail.luckd0g@163.com/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/681e4a5260c182feb5fc1d96f0d43c62c21dc6c9.1786142946.git.bvanassche@acm.org
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
The LeapRAID driver provides support for LeapRAID PCIe RAID controllers,
enabling communication between the host operating system, firmware, and
hardware for efficient storage management.
The driver is organized into several logical modules, each with a clear
responsibility:
leapraid_os.c: Integrates with the Linux SCSI subsystem, handling host
template callbacks, PCIe device probing, and initialization.
leapraid_func.c: Contains low-level routines for firmware/hardware
interaction, interrupt handling, and reset logic.
leapraid_app.c: Provides the ioctl interface for user-space tools.
leapraid_transport.c: Manages interactions with the SCSI transport
layer for SAS PHYs and ports.
leapraid_func.h: Contains internal definitions shared among driver
modules.
leapraid.h: Contains low-level hardware definitions for
driver/firmware interaction.
The leapraid_probe() function orchestrates the setup: it allocates the
adapter structure and SCSI host, configures hardware interfaces, and
registers it with the SCSI mid-layer. Following registration,
scsi_scan_host() is invoked to initiate device discovery, with firmware
reporting devices via interrupt-driven events.
This initial commit provides the necessary infrastructure for
subsequent development of full I/O path handling, error recovery,
and advanced management features.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Dongdong Hao <doubled@leap-io-kernel.com>
Link: https://patch.msgid.link/0cbc6245aabdc6e8c90587675e76ba316c5b549e.1785823793.git.doubled@leap-io-kernel.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
