| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Set supported_speeds in set_pcie_port_type() so sparc64 and
powerpc, which call it via of_create_pci_dev() instead of the usual
pci_setup_device(), correctly set the supported PCIe link speeds
(Stian Halseth)
- When pcie_set_mps() changes MPS, update the value in the saved
state so a subsequent restore doesn't restore an invalid value
(Niklas Cassel)
- Skip Target Speed quirk on clamped ports with no link (Maciej W.
Rozycki)
Driver binding:
- Assume control of portdrv-related features only when portdrv is
enabled, since we can't use them without portdrv (Kuppuswamy
Sathyanarayanan)
- Centralize feature ownership checking so code only needs to check
'host->native_X' and doesn't need to also check 'pcie_ports_native'
(Kuppuswamy Sathyanarayanan)
Error handling:
- Fix leaks when ACPI APEI/GHES error events overflow the kfifo or
mention a device that no longer exists (Priyank Rathod)
- Fix aer_process_err_devices() leak when a device is recorded as an
error source purely by being mentioned in the Root Port Error
Source and the device is inaccessible or logged only masked errors
(Priyank Rathod)
ASPM:
- Disable ASPM when drivers request that, even if the OS doesn't own
ASPM; otherwise drivers do it on their own, which is worse (Ilpo
Järvinen)
Power management:
- Align hibernate poweroff flow with suspend flow for bridges so they
can be powered down at hibernate as they are for suspend (Mario
Limonciello)
- Restore BARs after powering up during enumeration to fix a
regression on devices that don't preserve state in D3hot (Keng-Yu
Lin)
- Avoid D3 on PLX PEX 8532/8533/8548 downstream ports, where putting
them in D3hot takes down the whole switch (Imre Kaloz)
Power control:
- Add GPIO driver for Toshiba TC9563 embedded GPIO controller (Alex
Elder)
- Add DT documentation and pwrctrl driver support for TC9563 embedded
GPIO controller (Lorenzo Bianconi)
- Switch the tc9563 per-port reset to use the GPIO descriptor API
instead of direct regmap accesses (Lorenzo Bianconi)
- Only destroy devices created by pwrctrl core, so that when removing
a PCIe controller driver that uses pwrctrl, we don't remove devices
populated by another mechanism (Shawn Lin)
- Power off child devices on power-on failure (Lorenzo Bianconi)
PCIe native device hotplug:
- Make the 'pciehp_poll_mode' parameter read-only to prevent changes
via sysfs, which can cause errors when unbinding (Runyu Xiao)
Virtualization:
- Read SR-IOV VF Revision ID and Subsystem ID from VF instead of
assuming they're the same as VF 0; they may differ (Logan Odell)
- Add ACS quirk for Pericom PI7C9X2G304 switches (Hans de Goede)
Peer-to-peer DMA:
- Add Zhaoxin KX-6000, KH-40000, KX-6000G, KX-7000, and KH-50000 host
bridges to allowlist (LeoLiu-oc)
- Add Alibaba T-HEAD Yitian 710 host bridge to allowlist (Feng Tang)
- Add Intel Haswell client host bridge to allowlist (Scott Lee)
- Intel Xeon E3/E5/E7 0x6f00 host bridge to allowlist (kai zhang)
- Fix handling of errors in pci_p2pdma_add_resource() to avoid (a)
unmapping a BAR if registering another fails and (b) use after free
of p2p_pgmap (Leon Romanovsky)
- Wait for RCU readers before freeing state to avoid use-after-free
of pdev->p2pdma (Leon Romanovsky)
- Restrict pci_p2pmem_find_many() to providers backed by a pool (Leon
Romanovsky)
- Safely terminate ACS redirect lists to avoid out-of-bounds access
to the buffer (Leon Romanovsky)
- Silence 'Host bridge not in P2PDMA whitelist' warnings unless
caller, e.g., pci_p2pmem_find_many(), requests 'verbose' (Leon
Romanovsky)
Sysfs:
- Return -ENODEV or -EIO sysfs 'label' or 'acpi_index' attributes
when Device Name _DSM fails, not -1, which is interpreted as -EPERM
(Krzysztof Wilczyński)
- Return valid sysfs 'acpi_index' attribute even if the Device Name
_DSM returned an invalid 'label' (Krzysztof Wilczyński)
- Expose sysfs 'acpi_index' and 'label' based on whether the Device
Name _DSM returns valid data, not merely whether the _DSM is
implemented (Krzysztof Wilczyński)
- Avoid out-of-bounds reads of the label returned by the Device Name
_DSM, which is in UTF-16 characters, not bytes (Krzysztof
Wilczyński)
- Reject unaligned resource I/O port accesses, which can oops on
arm64 (Deepanshu Kartikey)
Endpoint framework:
- Pass the correct physical and virtual endpoint function numbers
when setting translation of inbound memory windows (Koichiro Den)
- Make embedded doorbell IRQ non-shared, since currently only the
first EPF can allocate doorbells (Koichiro Den)
- MSI doorbells currently target the first EPF attached to an EPC;
let other EPFs try the embedded doorbell instead of failing when
they can't use the MSI doorbell (Koichiro Den)
- Serialize scan of vNTB virtual PCI bus with other PCI topology
changes (Koichiro Den)
- Manage vNTB lifetimes to avoid leaking virtual devices and buses
and allow removal (Koichiro Den)
- Track vNTB link state from both sides so both see the same
effective link state (Koichiro Den)
- Configure vNTB MSI-X when supported to avoid IOMMU faults and
failure to deliver doorbell interrupts on RC (Koichiro Den)
APM X-Gene PCIe controller driver:
- Use devm for clocks so they're automatically disabled, unprepared,
and released if errors happen during probe (Yuho Choi)
ASPEED PCIe controller driver:
- Fix clk and PHY leaks in aspeed_pcie_port_init() error paths (Liu
Zhenlong)
Broadcom iProc PCIe controller driver:
- Expose devm_pci_alloc_host_bridge_release() so drivers can share a
devm release function even if they don't need the device tree
parsing done by devm_pci_alloc_host_bridge() (Bjorn Helgaas)
- Request only the memory window from BCMA Enumeration ROM and warn
if it doesn't match the one in DT, which fixes an iproc-bcma probe
failure (Semih Baskan)
Broadcom STB PCIe controller driver:
- Replace bool properties for each SoC configuration with a u32
bitvector and a BFLAG() helper (Jim Quinlan)
- Use a similar BQUIRK() helper to test various SoC quirks (Jim
Quinlan)
Cadence PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Return error (not success) from cdns_plat_pcie_probe() if
pm_runtime_get_sync() or cdns_pcie_ep_setup() failed (Vladimir
Oltean)
- Correct the driver data pointer usage; previously .probe() stored
'struct cdns_plat_pcie *', but .shutdown() used the pointer as
'struct cdns_pcie *', resulting in accessing garbage (Linmao Li)
ESWIN PCIe controller driver:
- Publish the platform driver MODULE_DEVICE_TABLE so the driver can
be autoloaded when built as a module (Pengpeng Hou)
Freescale i.MX6 PCIe controller driver:
- Fix resource and pwrctrl device leaks .probe() (Zhijian Han)
- Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from
default 120 to 140 (Richard Zhu)
- Use dev_err_probe() in host init error path to silence
-EPROBE_DEFER messages (Alexander Stein)
- Avoid dereferencing NULL clock names when 'clocks' includes more
phandles than 'clock-names' has names (Rudi Heitbaum)
- Add suspend_poweroff flag so platforms like i.MX that power off RC
controllers during suspend can enter L2 so endpoints can get
PME_Turn_Off notifications before power loss (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four
controllers on LX2160A (Vincent Jardin)
Intel VMD host bridge driver:
- Flush DMA writes before handling MSI on Meteor Lake: MSI may arrive
before write has completed, resulting in an nvme 30 second stall
before a QID timeout and possibly other similar problems (Rickey
Bartlett)
- Flush DMA writes before handling MSI on Arrow Lake (Vladimir
Nedoshivin)
Marvell Aardvark PCIe controller driver:
- Disable PHY on probe failures (Myeonghun Pak)
Marvell MVEBU PCIe controller driver:
- Refcount child OF nodes during .probe() to make a concurrent OF
overlay removal safe (Krzysztof Kozlowski)
MediaTek PCIe controller driver:
- Find INTx DT property by 'interrupt-controller' name instead of
assuming it's the first child node (Zhengping Zhang)
MediaTek PCIe Gen3 controller driver:
- Fix a 64-bit type truncation in mtk_pcie_set_trans_table() to avoid
issues with windows above or larger than 4GB (Sreeraj S Kurup)
NVIDIA Tegra264 PCIe controller driver:
- Fix the Link Capabilities offset so we read the correct register
(Bjorn Helgaas)
Qualcomm PCIe controller driver:
- Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing
resets used by downstream devices like USB controllers (Christopher
Obbard)
- Block accesses to downstream devices on link down to reduce a storm
of Completion Timeout AER interrupts (Qiang Yu)
- Skip system suspend/resume for firmware-managed PCIe, where
firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar)
- Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
(Manivannan Sadhasivam)
- Deinitialize endpoint on remove (Guangshuo Li)
- Treat Root Port error recovery as successful even if link doesn't
come up after reset because the device was hot-unplugged (Konrad
Dybcio)
- Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present,
indicating an external MSI controller (Ayiluri Naga Rashmi)
Renesas R-Car PCIe controller driver:
- Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek
Vasut)
- Support PERST# via reset subsystem as well as the existing GPIO
support to prepare for R-Car Gen5 SoCs (Marek Vasut)
- Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe
Gen 4 core (Marek Vasut)
- Add Application/Local register reset DT description and driver
support for both host and endpoint mode (Marek Vasut)
- Add PM ops so controller works after suspend/resume (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Disable refclk on probe failure (Lad Prabhakar)
- Propagate platform_get_irq_byname() errors so probe deferral works
correctly (Lad Prabhakar)
- Tear down INTx handlers if subsequent initialization fails (Lad
Prabhakar)
- Add RZ/G3L (R9A08G046) DT and driver support (Biju Das)
Rockchip PCIe controller driver:
- Limit host and endpoint controllers to 2.5 GT/s since 5.0 GT/s is
unsafe per Rockchip (Geraldo Nascimento)
Synopsys DesignWare PCIe controller driver:
- Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data
corruption if the iATU translates DMA engine transactions (Sumit
Kumar)
- Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans
Zhang)
TI DRA7xx PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
- Fix optional clock leak when .probe() fails by using
devm_clk_get_optional_enabled() (Felix Gu)
TI Keystone PCIe controller driver:
- Remove device links to PHY, which are redundant because the PHY
core itself adds them (Vladimir Oltean)
UltraRISC PCIe controller driver:
- Allow DWC drivers to skip outbound iATU setup if they don't need
translation between CPU and PCI addresses (Xincheng Zhang)
- Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang)
Xilinx Versal CPM PCIe controller driver:
- Add DT and driver support for optional PERST# for use in warm reset
scenarios (Sai Krishna Musham)
Xilinx XDMA PCIe controller driver:
- Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain()
(Wentao Liang)"
* tag 'pci-v7.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (139 commits)
PCI/pwrctrl: Power off child devices on power-on failure
PCI/pwrctrl: Only destroy devices created by pwrctrl core
PCI/pwrctrl: generic: Fix leaking array from of_regulator_bulk_get_all()
PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API
PCI/pwrctrl: tc9563: Add GPIO auxiliary device support
dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller
gpio: tc9563: Add support for the embedded GPIO controller
PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present
PCI: qcom: Ignore -ENODEV after Root Port reset
PCI: qcom-ep: Deinitialize endpoint on remove
PCI/sysfs: Reject unaligned resource I/O port accesses
PCI: rcar-gen4: Add missing PM ops
PCI: endpoint: pci-epf-vntb: Honor MSI-X selection
PCI: endpoint: pci-epf-vntb: Use a local epf pointer in interrupt setup
PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear
PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP()
PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain
PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains()
PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help
PCI/ASPM: Disable ASPM when driver requests it
...
|
|
ntb_hw_epf tries MSI-X first and falls back to MSI. It reports the
result in COMMAND_CONFIGURE_DOORBELL. pci-epf-vntb ignores MSIX_ENABLE,
configures only MSI, and always raises peer interrupts with PCI_IRQ_MSI.
When MSI-X is selected, the host does not program MSI, so raising it can
issue a write to an invalid address. This was observed as IOMMU faults
on the RC, with no doorbell interrupts delivered.
Configure MSI-X when supported and use the selected type for peer
doorbells and link events. Allocate the MSI-X Table and PBA in the config
BAR and configure db_count entries. Use this EPF-owned layout even if the
EPC has fixed, hardware-owned Table/PBA regions, as pci-epf-test and
nvmet-pci-epf already do.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20261015014402.2976188-3-den@valinux.co.jp
|
|
Use a local epf pointer in epf_ntb_configure_interrupt() to shorten the
repeated ntb->epf accesses.
No functional changes.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20261015014402.2976188-2-den@valinux.co.jp
|
|
The control-region link status is currently updated only by
COMMAND_LINK_UP and COMMAND_LINK_DOWN from the HOST. The virtual
NTB link callbacks are empty. Consequently, the HOST can see the link as
up before the VHOST has enabled it, and ntb_link_disable() on the VHOST
leaves LINK_STATUS_UP set without notifying either NTB client.
ntb_netdev can hide this device-level state bug because ntb_transport uses
a separate per-QP LINK_DOWN_FLAG message. Use ntb_tool to observe the
device link state directly:
After bringing both sides up, start one waiter on each side:
HOST# echo N > /sys/kernel/debug/ntb_tool/<H-device>/peer0/link_event
VHOST# echo N > /sys/kernel/debug/ntb_tool/<V-device>/peer0/link_event
While both waiters are blocked, disable the link on the VHOST:
VHOST# echo N > /sys/kernel/debug/ntb_tool/<V-device>/link
Without this patch, the link-disable command succeeds, but peer0/link
remains Y on both sides and neither waiter returns.
Track HOST and VHOST enablement separately and report the effective link
as up only when both sides have enabled it, as pci-epf-ntb does for its
two physical hosts. Both NTB clients observe this effective state, so
notify both sides only when it changes, including the side whose request
completes the transition. Serialize the two paths because HOST commands
run from delayed work while the VHOST callbacks may run concurrently.
With this patch, peer0/link changes to N on both sides and both waiters
return.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20261014071448.2473208-1-den@valinux.co.jp/
Link: https://patch.msgid.link/20261015142716.3452900-1-den@valinux.co.jp
|
|
The virtual PCI driver registers an ntb_dev but has no remove callback.
Unbinding the endpoint function can therefore free BARs while the NTB
device and its client still use them. It also leaves the virtual PCI
devices and root bus allocated.
Allocate an ntb_dev for each virtual PCI probe and unregister it from the
matching remove callback. Start command processing only after registration.
Publish the device for doorbell IRQs at the same point. During remove, stop
the command work and drain IRQ handlers before unregistering the device.
Retain the root bus returned by pci_scan_bus() so it can be removed on
unbind. Unregister the virtual PCI driver before releasing endpoint
resources. Stop and remove the root bus under the PCI rescan/remove lock,
then release its host bridge.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org # 6.0+
Link: https://patch.msgid.link/20260901063238.631166-3-den@valinux.co.jp
|
|
The virtual PCI bus is scanned without holding the PCI rescan/remove
lock. This can race with other PCI topology changes.
Hold the lock across the bus scan and device addition.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/3tgrcel5fl55ulf3zjya4fkz4t2ms7iwwjif5rnzn2rafsydd6@i4e5etm7uqvz/
Link: https://patch.msgid.link/20260901063238.631166-2-den@valinux.co.jp
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
pci_epf_alloc_doorbell() rejects every EPF that is not the first one
attached to the EPC because the MSI-backed path can populate doorbell
messages only for that EPF. This also prevents non-first EPFs from using
the embedded doorbell backend.
Keep the MSI-backed path limited to the first attached EPF. Let
non-first EPFs skip it and try the embedded doorbell directly. The
embedded IRQ is exclusive, so a second embedded user fails to request
the IRQ instead of receiving another EPF's notifications.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728172306.2751813-4-den@valinux.co.jp
|
|
Embedded doorbells may use the same virq for several messages. This does
not mean the IRQ itself should be shared. Consumers only need to request
each distinct virq once, as vNTB and pci-epf-test already do.
IRQF_SHARED would let different EPFs register handlers for the same IRQ.
The embedded doorbell interface cannot tell which EPF a write targets,
so every handler would handle it.
Only the first EPF can allocate doorbells today, so this cannot happen
yet. Drop IRQF_SHARED before extending the embedded backend to non-first
EPFs. A second request for the same IRQ will then fail with -EBUSY
instead of attaching another handler.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728172306.2751813-3-den@valinux.co.jp
|
|
vntb_epf_mw_set_trans() programs the memory-window BAR through
pci_epc_set_bar() with hardcoded function numbers (0, 0), so the BAR
lands on the wrong function whenever the vNTB EPF is bound to anything
but PF0. The other BAR programming sites in the vNTB driver already pass
the EPF's own numbers.
Pass the EPF's own func_no/vfunc_no here as well.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728172306.2751813-2-den@valinux.co.jp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
The MHI core needs to make sure that all the current DMA transactions are
completed before removing the channels. So implement the
mhi_cntrl->flush_async() callback by first making sure all the in-flight
DMA operations are completed and then flushing the DMA workqueue.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
|
|
Use dmaengine_prep_config_single() to simplify
pci_epf_mhi_edma_read[_sync]() and pci_epf_mhi_edma_write[_sync]().
No functional change.
Tested-by: Niklas Cassel <cassel@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260521-dma_prep_config-v7-8-1f73f4899883@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use dmaengine_prep_config_single() to simplify code.
No functional change.
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260521-dma_prep_config-v7-3-1f73f4899883@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Implement .db_vector_count() and .db_vector_mask() so NTB core/clients can
map doorbell events to per-vector work and avoid the thundering-herd
behavior.
pci-epf-vntb reserves two slots in db_count: slot 0 for link events and
slot 1 which is historically unused. Therefore the number of doorbell
vectors is (db_count - 2).
Report vectors as 0..N-1 and return BIT_ULL(db_vector) for the
corresponding doorbell bit. Build db_valid_mask from a validated vector
count so out-of-range db_count values cannot create invalid shifts.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-8-den@valinux.co.jp
|
|
In pci-epf-vntb, db_count represents the total number of doorbell slots
exposed to the peer, including:
- slot #0 reserved for link events, and
- slot #1 historically unused (kept for compatibility).
Only the remaining slots correspond to actual doorbell bits. The current
db_valid_mask() exposes all slots as valid doorbells.
Limit db_valid_mask() to the real doorbell bits by returning
BIT_ULL(db_count - 2) - 1, and guard against db_count < 2.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-7-den@valinux.co.jp
|
|
db_count controls how many doorbell slots are allocated and exposed. It is
also used by the doorbell mask helpers. After an EPC has been attached,
changing it from configfs can leave runtime paths using a different count
than the one used to set up the doorbell resources.
Reject db_count writes after EPC attach, and reject values outside
MIN_DB_COUNT..MAX_DB_COUNT before attach. Now that MIN_DB_COUNT documents
the usable doorbell floor, use it in the store path too.
While at it, apply the same after-attach guard to the other vNTB configfs
knobs. BAR choices, spad_count, memory-window counts and sizes, and the
virtual PCI IDs are also consumed during bind, so changing them later at
runtime is meaningless and unsafe.
Return -EOPNOTSUPP for after-attach writes. The value itself may be valid,
but changing it in that state is not supported.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-6-den@valinux.co.jp
|
|
pci-epf-vntb reserves slot 0 for link events and keeps slot 1 unused for
legacy layout compatibility. A db_count smaller than MIN_DB_COUNT leaves
no usable doorbell slot after those reservations.
Reject such configurations when configuring interrupts.
While at it, move MAX_DB_COUNT next to MIN_DB_COUNT. They are used as a
pair in the range check, and keeping them together makes the valid doorbell
range easier to read.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-5-den@valinux.co.jp
|
|
ntb_db_event() expects the vector number to be relative to the first
doorbell vector starting at 0.
pci-epf-vntb reserves vector 0 for link events and uses higher vector
indices for doorbells. By passing the raw slot index to ntb_db_event(),
it effectively assumes that doorbell 0 maps to vector 1.
However, because the host uses a legacy slot layout and writes doorbell
0 into the third slot, doorbell 0 ultimately appears as vector 2 from
the NTB core perspective.
Adjust pci-epf-vntb to:
- skip the unused second slot, and
- report doorbells as 0-based vectors (DB#0 -> vector 0).
This change does not introduce a behavioral difference until
.db_vector_count()/.db_vector_mask() are implemented, because without
those callbacks NTB clients effectively ignore the vector number.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-4-den@valinux.co.jp
|
|
The NTB .peer_db_set() callback may be invoked from atomic context.
pci-epf-vntb currently calls pci_epc_raise_irq() directly, but
pci_epc_raise_irq() may sleep (it takes epc->lock).
Avoid sleeping in atomic context by coalescing doorbell bits into an
atomic64 pending mask and raising MSIs from a work item. Limit the
amount of work per run to avoid monopolizing the workqueue under a
doorbell storm.
Clear stale pending bits before enabling the work item and after disabling
it during cleanup. Also mask requested doorbells against the currently
valid doorbell mask before queueing work, and iterate the pending u64 with
__ffs64() so high doorbell bits are handled correctly.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-3-den@valinux.co.jp
|
|
vntb_epf_peer_db_set() raises an MSI interrupt to notify the RC side of
a doorbell event. pci_epc_raise_irq(..., PCI_IRQ_MSI, interrupt_num)
takes a 1-based MSI interrupt number.
The ntb_hw_epf driver reserves MSI #1 for link events, so doorbells
would naturally start at MSI #2 (doorbell bit 0 -> MSI #2). However,
pci-epf-vntb has historically applied an extra offset and mapped doorbell
bit 0 to MSI #3. This matches the legacy behavior of ntb_hw_epf and has
been preserved since commit e35f56bb0330 ("PCI: endpoint: Support NTB
transfer between RC and EP").
This offset has not surfaced as a functional issue because:
- ntb_hw_epf typically allocates enough MSI vectors, so the off-by-one
still hits a valid MSI vector, and
- ntb_hw_epf does not implement .db_vector_count()/.db_vector_mask(), so
client drivers such as ntb_transport effectively ignore the vector
number and schedule all QPs.
Correcting the MSI number would break interoperability with peers
running older kernels.
Document the legacy offset to avoid confusion when enabling
per-db-vector handling.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260513024923.451765-2-den@valinux.co.jp
|
|
epf_ntb->db_count value should be within 1 to MAX_DB_COUNT. Current code
only checks for the upper bound, while the lower bound is unchecked. This
can cause a lot of issues in the driver if the user passes 'db_count' as 0.
Add a check for 0 also. While at it, remove the redundant 'db_count'
variable from epf_ntb_configure_interrupt().
Fixes: 8b821cf76150 ("PCI: endpoint: Add EP function driver to provide NTB functionality")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260407124421.282766-3-mani@kernel.org
|
|
epf_ntb->db_count value should be within 1 to MAX_DB_COUNT. Current code
only checks for the upper bound, while the lower bound is unchecked. This
can cause a lot of issues in the driver if the user passes 'db_count' as 0.
Add a check for 0 also. While at it, remove the redundant 'db_count'
assignment.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260407124421.282766-2-mani@kernel.org
|
|
Some endpoint platforms cannot use platform MSI / GIC ITS to implement
EP-side doorbells. In those cases, EPF drivers cannot provide an
interrupt-driven doorbell and often fall back to polling.
Add an "embedded" doorbell backend that uses a controller-integrated
doorbell target (e.g. DesignWare integrated eDMA interrupt-emulation
doorbell).
The backend locates the doorbell register and a corresponding Linux IRQ
via the EPC aux-resource API. If the doorbell register is already
exposed via a fixed BAR mapping, provide BAR+offset. Otherwise provide
the DMA address returned by dma_map_resource() (which may be an IOVA
when an IOMMU is enabled) so EPF drivers can map it into BAR space.
When MSI doorbell allocation fails with -ENODEV,
pci_epf_alloc_doorbell() falls back to this embedded backend.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260414141514.1341429-8-den@valinux.co.jp
|
|
pci-epf-test advertises the doorbell target to the RC as a BAR number
and an offset, and the RC rings the doorbell with a single DWORD MMIO
write.
Some doorbell backends may report that the doorbell target is already
exposed via a platform-owned fixed BAR (db_msg[0].bar/offset). In that
case, reuse the pre-exposed window and do not reprogram the BAR with
pci_epc_set_bar().
Also honor db_msg[0].irq_flags when requesting the doorbell IRQ, and
only restore the original BAR mapping on disable if pci-epf-test
programmed it.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: wrap comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-7-den@valinux.co.jp
|
|
Support doorbell backends where the doorbell target is already exposed
via a platform-owned fixed BAR mapping and/or where the doorbell IRQ
must be requested with specific flags.
When pci_epf_alloc_doorbell() provides db_msg[].bar/offset, reuse the
pre-exposed BAR window and skip programming a new inbound mapping. Also
honor db_msg[].irq_flags when requesting the doorbell IRQ.
Multiple doorbells may share the same Linux IRQ. Avoid duplicate
request_irq() calls by requesting each unique virq once.
Make pci-epf-vntb work with platform-defined or embedded doorbell
backends without exposing backend-specific details to the consumer
layer.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-6-den@valinux.co.jp
|
|
Prepare pci-ep-msi for non-MSI doorbell backends.
Factor MSI doorbell allocation into a helper and extend struct
pci_epf_doorbell_msg with:
- irq_flags: required IRQ request flags (e.g. IRQF_SHARED for some
backends)
- type: doorbell backend type
- bar/offset: pre-exposed doorbell target location, if any
Initialize these fields for the existing MSI-backed doorbell
implementation.
Also add PCI_EPF_DOORBELL_EMBEDDED type, which is to be implemented in a
follow-up patch.
No functional changes.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-5-den@valinux.co.jp
|
|
Endpoint controller drivers may integrate auxiliary blocks (e.g. DMA
engines) whose register windows and descriptor memories metadata need to
be exposed to a remote peer. Endpoint function drivers need a generic
way to discover such resources without hard-coding controller-specific
helpers.
Add pci_epc_get_aux_resources_count() / pci_epc_get_aux_resources() and
the corresponding pci_epc_ops callbacks. The count helper returns the
number of available resources, while the get helper fills a
caller-provided array of resources described by type, physical address
and size, plus type-specific metadata.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Suggested-by: Frank Li <Frank.li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260414141514.1341429-2-den@valinux.co.jp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
In pci-epf-test.c, set the STATUS_NO_RESOURCE status bit if
pci_epc_set_bar() returns -ENOSPC. This status bit is used to indicate
that there are not enough inbound window resources to allocate the
subrange.
In pci_endpoint_test.c, return -ENOSPC instead of -EIO when
STATUS_NO_RESOURCE is set.
In pci_endpoint_test.c, skip the BAR subrange test if -ENOSPC, i.e., there
are not enough inbound window resources to run the test.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: squash related commits]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260407-skip-bar_subrange-tests-if-enospc-v4-1-6f2e65f2298c@foss.st.com
Link: https://patch.msgid.link/20260407-skip-bar_subrange-tests-if-enospc-v4-2-6f2e65f2298c@foss.st.com
Link: https://patch.msgid.link/20260407-skip-bar_subrange-tests-if-enospc-v4-3-6f2e65f2298c@foss.st.com
|
|
When vNTB is used as a PCI endpoint function, the NTB device is backed
by a virtual PCI function. For DMA API allocations and mappings, NTB
clients must use the device that is associated with the IOMMU domain.
Implement ntb_dev_ops->get_dma_dev() for pci-epf-vntb and return the EPC
parent device.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306031443.1911860-4-den@valinux.co.jp
|
|
Include errno in the error prints and also use dev_err() where applicable.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260305071236.23792-2-mani@kernel.org
|
|
Merely printing the error log without the actual EPF name will not give
much clue to the users about the failure. Hence, print the EPF name also.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260305071236.23792-1-mani@kernel.org
|
|
When the BAR subrange mapping test on DWC-based platforms fails due to
insufficient free inbound iATU regions, pci_epf_test_bar_subrange_setup()
returns an error (-ENOSPC) but does not restore the original BAR mapping.
This causes subsequent test runs to become confusing, since the failure may
leave room for the next subrange mapping test to pass.
Fix this by restoring the original BAR mapping when preparation of the
subrange mapping fails, so that no side effect remains regardless of the
test success or failure.
Fixes: 6c5e6101423b ("PCI: endpoint: pci-epf-test: Add BAR subrange mapping test support")
Reported-by: Christian Bruel <christian.bruel@foss.st.com>
Closes: https://lore.kernel.org/linux-pci/b2b03ebe-9482-4a13-b22f-7b44da096eed@foss.st.com/
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Christian Bruel <christian.bruel@foss.st.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260316140225.1481658-1-den@valinux.co.jp
|
|
Advertise reserved BARs as reserved in the Capabilities register,
such that the host side driver will be able to skip reserved BARs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Koichiro Den <den@valinux.co.jp>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-20-cassel@kernel.org
|
|
Add a pci_epc_bar_type BAR_DISABLED to more clearly differentiate from
BAR_RESERVED.
This BAR type will only be used to describe a BAR that the EPC driver
should disable, and will thus never be available to an EPF driver.
(Unlike BAR_RESERVED, which will never be disabled by default by an EPC
driver.)
Co-developed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Koichiro Den <den@valinux.co.jp>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Link: https://patch.msgid.link/20260312130229.2282001-17-cassel@kernel.org
|
|
pci_epf_make() overwrites the actual error returned by pci_epf_create()
with -EINVAL, which hides the real failure reason. Use PTR_ERR(epf) instead
and print the error code.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260227030701.40533-1-alok.a.tiwari@oracle.com
|
|
The function description in kernel-doc refers to pci_epf_add_epf(), but the
correct function name is pci_epf_add_vepf(). Update it to match the
implementation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260224183927.1369124-1-alok.a.tiwari@oracle.com
|
|
Disable the delayed work before clearing BAR mappings and doorbells to
avoid running the handler after resources have been torn down.
Unable to handle kernel paging request at virtual address ffff800083f46004
[...]
Internal error: Oops: 0000000096000007 [#1] SMP
[...]
Call trace:
epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P)
process_one_work+0x154/0x3b0
worker_thread+0x2c8/0x400
kthread+0x148/0x210
ret_from_fork+0x10/0x20
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-4-den@valinux.co.jp
|
|
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to do later. This leads to an oops when .allow_link fails or
when .drop_link is performed. Remove the helper.
Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC
group lifetime, and pci_epc_put() in the .drop_link path is sufficient.
Fixes: 8b821cf76150 ("PCI: endpoint: Add EP function driver to provide NTB functionality")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-3-den@valinux.co.jp
|
|
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to perform later. This leads to an oops when .allow_link fails
or when .drop_link is performed. The following is an example oops of the
former case:
Unable to handle kernel paging request at virtual address dead000000000108
[...]
[dead000000000108] address between user and kernel address ranges
Internal error: Oops: 0000000096000044 [#1] SMP
[...]
Call trace:
pci_epc_remove_epf+0x78/0xe0 (P)
pci_primary_epc_epf_link+0x88/0xa8
configfs_symlink+0x1f4/0x5a0
vfs_symlink+0x134/0x1d8
do_symlinkat+0x88/0x138
__arm64_sys_symlinkat+0x74/0xe0
[...]
Remove the helper, and drop pci_epc_put(). EPC device refcounting is
tied to the configfs EPC group lifetime, and pci_epc_put() in the
.drop_link path is sufficient.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-2-den@valinux.co.jp
|
|
pci_epf_mhi_edma_read() and pci_epf_mhi_edma_write() start DMA
operations and wait for completion with a timeout.
On successful completion, they previously returned the remaining
timeout, which callers may treat as an error. In particular,
mhi_ep_ring_add_element(), which calls pci_epf_mhi_edma_write() via
mhi_cntrl->write_sync(), interprets any non-zero return value as
failure.
Return 0 on success instead of the remaining timeout to prevent
mhi_ep_ring_add_element() from treating successful completion as an
error.
Fixes: 7b99aaaddabb ("PCI: epf-mhi: Add eDMA support")
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
[mani: changed commit log as per https://lore.kernel.org/linux-pci/20260227191510.GA3904799@bhelgaas]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206200529.10784-1-git@danielhodges.dev
|
|
The mw1..mw4 configfs attributes are only valid when the MW index is
within the configured num_mws range. Return -ERANGE instead of -EINVAL
when a configfs MW size attribute is accessed with an out-of-range MW
index.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260219145633.4191325-1-den@valinux.co.jp
|
|
Follow common kernel idioms for indices derived from configfs attributes
and suppress Smatch warnings:
epf_ntb_mw1_show() warn: potential spectre issue 'ntb->mws_size' [r]
epf_ntb_mw1_store() warn: potential spectre issue 'ntb->mws_size' [w]
Also fix the error message for out-of-range MW indices and %lld format
for unsigned values.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260105075606.1253697-1-den@valinux.co.jp
|
|
configfs_group_operations
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
27503 12184 256 39943 9c07 drivers/pci/endpoint/pci-ep-cfs.o
After:
=====
text data bss dec hex filename
27855 11832 256 39943 9c07 drivers/pci/endpoint/pci-ep-cfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/f1f05f1c10c6caf37dd620fa12f508c53536996b.1765705512.git.christophe.jaillet@wanadoo.fr
|
|
The doorbell test requires the EPC driver to support dynamic inbound
mapping so the host can map the doorbell target address into a BAR
aperture.
Expose epc_features->dynamic_inbound_mapping via a new
CAP_DYNAMIC_INBOUND_MAPPING bit in the pci-epf-test capability register,
so the host-side pci_endpoint_test driver can detect missing support and
return -EOPNOTSUPP instead of running the test fruitlessly.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260215150334.3391943-2-den@valinux.co.jp
|
|
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation.
Fixes: 1c3b002c6bf6 ("PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260217063856.3759713-4-den@valinux.co.jp
|
|
pci_epf_test_doorbell_cleanup() unconditionally calls free_irq() for the
doorbell virq, which can trigger "Trying to free already-free IRQ"
warnings when the IRQ was never requested or when request_threaded_irq()
failed.
Move free_irq() out of pci_epf_test_doorbell_cleanup() and invoke it
only after a successful request, so that free_irq() is not called for
an unrequested IRQ.
Fixes: eff0c286aa91 ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260217063856.3759713-3-den@valinux.co.jp
|
|
epf_ntb_db_bar_init_msi_doorbell() requests ntb->db_count doorbell IRQs
and then performs additional MSI doorbell setup that may still fail.
The error path unwinds the requested IRQs, but it uses a loop variable
that is reused later in the function. When a later step fails, the
unwind can run with an unexpected index value and leave some IRQs
requested.
Track the number of successfully requested IRQs separately and use that
counter for the unwind so all previously requested IRQs are freed on
failure.
Fixes: dc693d606644 ("PCI: endpoint: pci-epf-vntb: Add MSI doorbell support")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260217063856.3759713-2-den@valinux.co.jp
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
