summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/debugfs.c
AgeCommit message (Collapse)Author
2026-09-25wifi: ath12k: add WBM SW desc fallback counterAniruddha Mishra
When HW CC is not done, the WBM RX error path falls back to cookie-based descriptor retrieval via ath12k_dp_get_rx_desc(). This fallback path is taken before knowing whether the retrieval will succeed, so it is not a drop event and should not be counted in the drop[] array. Add a dedicated sw_desc_fallback counter in ath12k_device_dp_rx_wbm_err_stats to track how often the HW CC fallback path is taken, distinct from actual packet drops. Expose the counter in the device_dp_stats debugfs file as a separate line. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aniruddha Mishra <aniruddha.mishra@oss.qualcomm.com> Co-developed-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260819053247.1420393-9-pardeep.kaur@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-09-25wifi: ath12k: fix 1-based ring index in REO Rx Received debugfs outputPardeep Kaur
The REO Rx Received section in device_dp_stats debugfs uses a 1-based ring index ("Ring1:", "Ring2:", ...) which is inconsistent with the rest of ath12k where rings are indexed from 0. Fix it to use 0-based indexing and lowercase "ring%d:" to match the style used by all other ring counters in the same function. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260819053247.1420393-8-pardeep.kaur@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-09-25wifi: ath12k: track per-ring RX sent-to-stack countHariharan Ramanathan
The device DP stats provide visibility into RX errors and drops but lack a counter for successfully delivered packets. Without this, it is difficult to correlate REO ring activity with actual stack delivery during debugging or performance analysis. Add sent_to_stack[DP_REO_DST_RING_MAX][ATH12K_MAX_DEVICES] to ath12k_device_dp_stats to track successful deliveries per REO ring per device. The counter is attributed to the ring owner's dp and indexed by partner_dp->device_id, keeping it in the same debugfs file as reo_rx[] for direct comparison in MLO configurations. Increment the counter just before each MSDU is handed off to the stack via ath12k_dp_rx_deliver_msdu(). Add a likely()/WARN_ON_ONCE() bounds check on ring_id before indexing sent_to_stack[], consistent with all other new stat arrays in this series. Expose the per-ring per-device counts in the device_dp_stats debugfs file under a new 'REO sent to stack:' section. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1 Signed-off-by: Hariharan Ramanathan <hariharan.ramanathan@oss.qualcomm.com> Co-developed-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260819053247.1420393-7-pardeep.kaur@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-09-25wifi: ath12k: add WBM RX error drop statisticsAniruddha Mishra
Without fine-grained drop counters, diagnosing RX failures in the WBM error path requires intrusive debugging. Introduce per-drop-reason counters to track exactly where and why packets are dropped during WBM RX error handling. Introduce a new dp_stats.h header and define ath12k_wbm_err_drop_reason enum there covering all drop points in the WBM RX error path: descriptor parse failures, SW descriptor retrieval errors, null partner DP, invalid HW link ID, null pdev/ar, CAC running, scatter-gather drops, and invalid NWifi header length. The new header is included by dp.h which is already included by all consumers. Add ath12k_device_dp_rx_wbm_err_stats struct grouping rxdma_error[], reo_error[], and the new drop[] counters, replacing the flat arrays previously in ath12k_device_dp_stats. Add bounds checks before indexing rxdma_error[] and reo_error[] with hardware-supplied err_code values to prevent out-of-bounds writes, using the same likely/WARN_ON_ONCE pattern as the TX stats bounds fixes. Add ath12k_wifi7_dp_rx_wbm_err_free_skb() helper to combine drop stat increment and skb free at each drop site, reducing repetition. Define the helper at the top of dp_rx.c before its first use. Increment WBM_ERR_DROP_RXDMA_GENERIC only inside rxdma_err()'s default: branch so it counts only unhandled RXDMA errors, not every RXDMA drop - consistent with how WBM_ERR_DROP_REO_GENERIC is counted. Expose WBM RX drop counts in the device_dp_stats debugfs file under a new 'WBM Rx Drop Count' section. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aniruddha Mishra <aniruddha.mishra@oss.qualcomm.com> Co-developed-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260819053247.1420393-6-pardeep.kaur@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-09-25wifi: ath12k: add device DP stats reset support via debugfsHariharan Ramanathan
There is no way to reset device DP stats counters without reloading the driver, making it difficult to isolate issues to a specific time window during debugging. Add a write handler to the device_dp_stats debugfs file so that writing 'reset' clears all device DP stats counters. Change the file mode from 0400 to 0600 to allow write access. Use simple_write_to_buffer() to correctly handle partial writes and non-zero ppos, consistent with ath12k_write_simulate_fw_crash(). No lock is taken around the memset since the counters are updated locklessly in the datapath; taking dp_lock would be misleading as it does not protect device_stats updates. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1 Signed-off-by: Hariharan Ramanathan <hariharan.ramanathan@oss.qualcomm.com> Co-developed-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260819053247.1420393-5-pardeep.kaur@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-09-25wifi: ath12k: add TCL ring TX buffer allocation failure counterHariharan Ramanathan
When ath12k_dp_tx_assign_buffer() fails, the TX path returns -ENOMEM silently with no visibility into which traffic class is affected. Without a counter, TX descriptor pool exhaustion is invisible during debugging. Add txbuf_na[] indexed by pool_id to ath12k_device_dp_tx_err_stats to track TX descriptor pool allocation failures per traffic class and increment it on assign failure in the TX path. Expose the per-pool counts in debugfs under a new 'TX Descriptor Pool Alloc Failures' section. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1 Signed-off-by: Hariharan Ramanathan <hariharan.ramanathan@oss.qualcomm.com> Co-developed-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Signed-off-by: Pardeep Kaur <pardeep.kaur@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260819053247.1420393-4-pardeep.kaur@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-06-30wifi: ath12k: Show per-radio center freq in dp statsSreeramya Soratkal
Currently, the frequency on which each radio is operating is not available in device_dp_stats. This information is helpful in debugging the channel-specific throughput and is available with iw/nl80211 dump. Extend the device_dp_stats dump to display the center frequency in the existing per-radio loop. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sreeramya Soratkal <sreeramya.soratkal@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Link: https://patch.msgid.link/20260626085253.3927269-4-sreeramya.soratkal@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-06-30wifi: ath12k: Add timestamp to dp stats displaySreeramya Soratkal
In MLO configurations the device_dp_stats debugfs file is read separately for each ath12k device. Without a timestamp it is impossible to know whether two snapshots were taken at the same moment, making counter comparisons across devices unreliable. Prepend a ktime-based millisecond timestamp to the output header so the reader can confirm when the snapshot was taken. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sreeramya Soratkal <sreeramya.soratkal@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Link: https://patch.msgid.link/20260626085253.3927269-3-sreeramya.soratkal@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-06-30wifi: ath12k: Use runtime device count in dp stats displaySreeramya Soratkal
The REO Rx Received and Rx WBM REL SRC Errors display loops in ath12k_debugfs_dump_device_dp_stats() iterate up to the compile-time constant ATH12K_MAX_DEVICES. This unconditionally prints zeros in columns with no hardware behind it, making the output misleading. Replace the compile-time bound with the runtime ab->ag->num_devices so only live device slots appear in the output. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sreeramya Soratkal <sreeramya.soratkal@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Link: https://patch.msgid.link/20260626085253.3927269-2-sreeramya.soratkal@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-05-19wifi: ath12k: Add debugfs support to simulate incumbent signal interferenceAishwarya R
Add debugfs support to simulate incumbent signal interference from the host for testing purposes. The debugfs entry is created only for 6 GHz radio when firmware advertises the support through WMI_TLV_SERVICE_DCS_INCUMBENT_SIGNAL_INTERFERENCE_SUPPORT flag. Debugfs command: echo <interference_bitmap> > /sys/kernel/debug/ath12k/pci-000X/macX/simulate_incumbent_signal_interference Each bit in the interference_bitmap represents a 20 MHz segment. Bit 0 corresponds to the primary 20 MHz segment, regardless of its position within the operating bandwidth. Bit 1 represents the next adjacent 20 MHz segment, bit 2 the lower 20 MHz segment of the adjacent 40 MHz segment, and so on-progressing sequentially across the bandwidth.. Example: echo 0xF0 > /sys/kernel/debug/ath12k/pci-0002:01:00.0/mac0/simulate_incumbent_signal_interference This indicates that all the subchannels in the secondary 80 MHz segment were affected. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com> Signed-off-by: Amith A <amith.a@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Link: https://patch.msgid.link/20260511040242.1351792-3-amith.a@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-04-07wifi: ath12k: Create symlink for each radio in a wiphyRoopni Devanathan
In single-wiphy design, when more than one radio is registered as a single-wiphy in the mac80211 layer, the following warnings are seen: 1. debugfs: File 'ath12k' in directory 'phy0' already present! 2. debugfs: File 'simulate_fw_crash' in directory 'pci-0000:57:00.0' already present! debugfs: File 'device_dp_stats' in directory 'pci-01777777777777777777777:57:00.0' already present! When more than one radio is registered as a single-wiphy, symlinks for all the radios are created in the same debugfs directory: /sys/kernel/debug/ieee80211/phyX/ath12k, resulting in warning 1. When a symlink is created for the first radio, since the 'ath12k' directory is not present, it will be created and no warning will be thrown. But when symlink is created for more than one radio, since the 'ath12k' directory was already created for symlink for radio 1, a warning is thrown complaining that 'ath12k' directory is already present. To resolve warning 1, create symlink for each radio in separate debugfs directories. For the first radio, the symlink will always be the 'ath12k' directory. This ensures that the existing directory structure is retained for single-wiphy and multi-wiphy architectures. In single-wiphy architecture with multiple radios, create symlink in separate debugfs directories introduced by mac80211. Existing debugfs directory in single-wiphy architecture: /sys/kernel/debug/ieee80211/phyX/ath12k is a symlink to /sys/kernel/debug/ath12k/pci-0001:01:00.0/macY Proposed debugfs directory in single-wiphy architecture with one radio: /sys/kernel/debug/ieee80211/phyX/ath12k is a symlink to /sys/kernel/debug/ath12k/pci-0001:01:00.0/mac0 Proposed debugfs directory in single-wiphy architecture with more than one radio: /sys/kernel/debug/ieee80211/phyX/radio0/ath12k is a symlink to /sys/kernel/debug/ath12k/pci-0001:01:00.0/mac0 and /sys/kernel/debug/ieee80211/phyX/radioY/ath12k is a symlink to /sys/kernel/debug/ath12k/pci-0001:01:00.0/macY Where X is phy index and Y is radio index, seen in 'iw phyX info | grep Idx'. Two symlinks for the first radio are to ensure compatibility with the existing design. Add radio_idx inside ar, to track the radio index in probing order. API ath12k_debugfs_pdev_create() that creates SoC entries is called more than once when hardware group starts up, resulting in warning 2. To resolve this warning, remove all other calls to this API and add one inside the ath12k_core_pdev_create(). This API carries all pdev-specific initializations and can conveniently hold a call to ath12k_debugfs_pdev_create(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Harshitha Prem <harshitha.prem@oss.qualcomm.com> Signed-off-by: Harshitha Prem <harshitha.prem@oss.qualcomm.com> Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Link: https://patch.msgid.link/20260402051402.3903795-1-roopni.devanathan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-12-15Merge branch 'ath12k-ng' into ath-nextJeff Johnson
As originally proposed in [1], the ath12k driver was re-architected in the ath12k-ng branch to separate the logic specific to 802.11be (Wi-Fi 7) from the core logic. This separation will allow ath12k to also support 802.11bn (Wi-Fi 8) in the future. Now merge this into ath-next. Many thanks to everyone who worked on this re-architecture. Special thanks to Vasanthakumar Thiagarajan and Baochen Qiang who reviewed every patch, and to Ripan Deuri for the ath12k-ng => ath-next merge conflict resolution. Link: https://lore.kernel.org/all/4a17d730-ede8-463e-98d8-9b0291d0ca45@oss.qualcomm.com/ # [1] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-06wifi: ath12k: Make firmware stats reset caller-drivenManish Dharanenthiran
Currently, ath12k_fw_stats_reset() is called in ath12k_mac_get_fw_stats() before fetching the required stats from the firmware. However, ath12k_open_bcn_stats() requests firmware stats for each enabled BSS individually. Since the firmware stats are reset before fetching, only the last BSS's data is displayed. Also, in ath12k_mac_op_get_txpower(), ath12k_mac_op_sta_statistics(), and ath12k_mac_op_link_sta_statistics(), after getting the stats from the firmware, the reset function is not called until the next firmware stats are requested or while unloading the module. Hence, the stats buffer will not be freed until one of the above sequences is executed. However, in ath12k_open_vdev_stats(), ath12k_open_bcn_stats() and ath12k_open_pdev_stats(), firmware stats are reset after copying the necessary data in ath12k_wmi_fw_stats_dump(). This leads to inconsistent usage of ath12k_fw_stats_reset() for freeing the firmware stats. Avoid these discrepancies by making it the caller's responsibility to free the stats buffer, thereby removing the need to free the stats buffer in ath12k_mac_get_fw_stats() and ath12k_wmi_fw_stats_dump(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251031-beacon_stats-v1-1-f52fce7b03ac@qti.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-11-05wifi: ath12k: Move DP device stats to ath12k_dpPavankumar Nandeshwar
As part of data path modularization of device object framework, the per packet tx/rx operations now use ath12k_dp. Move all the device stats 'device_stats' from ath12k_base to ath12k_dp, consolidating all device stats within ath12k_dp. This would improve the performance by allowing the datapath to reach to the stats counters without to having to reach out to ath12k_base object. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com> Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com> Reviewed-by: Karthikeyan Periyasamy <karthikeyan.periyasamy@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20251103112111.2260639-3-quic_rdeuri@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-10-15wifi: ath12k: track dropped MSDU buffer type packets in REO exception ringSarika Sharma
Add a counter "reo_excep_msdu_buf_type" in ath12k_debugfs_dump_device_dp_stats() to account for packets dropped due to unexpected MSDU buffer types in the RX error path. These packets are discarded to prevent incorrect parsing and potential kernel crashes. This helps in debugging and monitoring RX error handling behavior. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sarika Sharma <sarika.sharma@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250930091551.3305312-3-sarika.sharma@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-10-10wifi: ath12k: Segregate the common and wifi7 specific structuresPavankumar Nandeshwar
Segregate the common and wifi7 specific structures in hal, and move them to corresponding header files. hal.h file in common directory is used by both common and wifi7 directory files, while hal.h and other hal headers are used only by files within the wifi7 directory since these headers contain hw specific hal data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com> Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251009111045.1763001-16-quic_rdeuri@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-09-30wifi: ath12k: Add framework for hardware specific ieee80211_ops registrationRipan Deuri
Introduce a framework to register the ieee80211_ops table based on the underlying hardware architecture. This is necessary to support architecture-specific implementations of ieee80211_ops such as .tx, which will be introduced in upcoming patches. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250930131005.2884253-5-quic_rdeuri@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: ath12k: Prefer {} to {0} in initializersJeff Johnson
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath12k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath12k-zero-brace-v1-1-d8c8ca9d40a8@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-17wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STATBjorn Andersson
When the ath12k driver is built without CONFIG_ATH12K_DEBUG, the recently refactored stats code can cause any user space application (such at NetworkManager) to consume 100% CPU for 3 seconds, every time stats are read. Commit 'b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")' moved ath12k_debugfs_fw_stats_request() out of debugfs, by merging the additional logic into ath12k_mac_get_fw_stats(). Among the added responsibility of ath12k_mac_get_fw_stats() was the busy-wait for `fw_stats_done`. Signalling of `fw_stats_done` happens when one of the WMI_REQUEST_PDEV_STAT, WMI_REQUEST_VDEV_STAT, and WMI_REQUEST_BCN_STAT messages are received, but the handling of the latter two commands remained in the debugfs code. As `fw_stats_done` isn't signalled, the calling processes will spin until the timeout (3 seconds) is reached. Moving the handling of these two additional responses out of debugfs resolves the issue. Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs") Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Tested-by: Abel Vesa <abel.vesa@linaro.org> Link: https://patch.msgid.link/20250609-ath12k-fw-stats-done-v1-1-2b3624656697@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: print device dp stats in debugfsVinith Kumar R
Print the data path related device specific stats in debugfs. These device_dp_stats are exposed in the ath12k debugfs directory. Output of device_dp_stats: root@CDCWLEX0799743-LIN:/home/qctest# cat /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/device_dp_stats DEVICE RX STATS: err ring pkts: 0 Invalid RBM: 0 RXDMA errors: Overflow: 0 MPDU len: 0 FCS: 0 Decrypt: 0 TKIP MIC: 0 Unencrypt: 0 MSDU len: 0 MSDU limit: 0 WiFi parse: 0 AMSDU parse: 0 SA timeout: 0 DA timeout: 0 Flow timeout: 0 Flush req: 0 AMSDU frag: 0 Multicast echo: 0 AMSDU mismatch: 0 Unauth WDS: 0 AMSDU or WDS: 0 REO errors: Desc addr zero: 0 Desc inval: 0 AMPDU in non BA: 0 Non BA dup: 0 BA dup: 0 Frame 2k jump: 0 BAR 2k jump: 0 Frame OOR: 155 BAR OOR: 0 No BA session: 0 Frame SN equal SSN: 0 PN check fail: 0 2k err: 0 PN err: 0 Desc blocked: 0 HAL REO errors: ring0: 0 ring1: 0 ring2: 0 ring3: 0 ring4: 0 ring5: 0 ring6: 0 ring7: 0 DEVICE TX STATS: TCL Ring Full Failures: ring0: 0 ring1: 0 ring2: 0 ring3: 0 Misc Transmit Failures: 0 tx_wbm_rel_source: 0:986 1:0 2:0 3:57 4:0 tqm_rel_reason: 0:1043 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 14:0 fw_tx_status: 0:57 1:0 2:0 3:0 4:0 5:0 6:0 tx_enqueued: 0:329 1:145 2:464 3:105 tx_completed: 0:329 1:145 2:464 3:105 radio0 tx_pending: 0 REO Rx Received: Ring1: 0:201 1:0 2:0 Ring2: 0:0 1:0 2:0 Ring3: 0:6152 1:0 2:0 Ring4: 0:9 1:0 2:0 Ring5: 0:0 1:0 2:0 Ring6: 0:0 1:0 2:0 Ring7: 0:0 1:0 2:0 Ring8: 0:0 1:0 2:0 Rx WBM REL SRC Errors: TQM: 0:0 1:0 2:0 Rxdma: 0:0 1:0 2:0 Reo: 0:155 1:0 2:0 FW: 0:0 1:0 2:0 SW: 0:0 1:0 2:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-4-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Add support to simulate firmware crashDinesh Karthikeyan
Add debugfs support to simulate firmware crash to test firmware restart. Usage: ----- echo assert > /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/simulate_fw_crash Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250417065237.2507613-1-maharaja.kennadyrajan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-11wifi: ath12k: Add support for link specific datapath statsBalamurugan Mahalingam
Add support to record the number of frames enqueued, hardware descriptor type, encapsulation/encryption types used, frames dropped and completed. This is useful for understanding the datapath performance and tune the peak throughput. The link specific stats can be viewed through the below debugfs file cat /sys/kernel/debug/ieee80211/phy0/netdev:wlan1/link_stats link[0] Tx Unicast Frames Enqueued = 9 link[0] Tx Broadcast Frames Enqueued = 78689 link[0] Tx Frames Completed = 78698 link[0] Tx Frames Dropped = 0 link[0] Tx Frame descriptor Encap Type = raw:0 native wifi:78698 ethernet:0 link[0] Tx Frame descriptor Encrypt Type = 0:78698 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 link[0] Tx Frame descriptor Type = buffer:78698 extension:0 ------------------------------------------------------ link[1] Tx Unicast Frames Enqueued = 0 link[1] Tx Broadcast Frames Enqueued = 78689 link[1] Tx Frames Completed = 78689 link[1] Tx Frames Dropped = 0 link[1] Tx Frame descriptor Encap Type = raw:0 native wifi:78689 ethernet:0 link[1] Tx Frame descriptor Encrypt Type = 0:78689 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 link[1] Tx Frame descriptor Type = buffer:78689 extension:0 ------------------------------------------------------ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Link: https://patch.msgid.link/20250409155125.299380-1-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-03-27wifi: ath12k: Replace band define G with GHZ where appropriateKarthikeyan Periyasamy
Currently, band define and enum are with the word 'G'. Replace it with more appropriate 'GHZ' for clarity and correctness. No functional changes. Only compile tested. Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250324062518.2752822-5-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-03-17wifi: ath12k: move firmware stats out of debugfsAditya Kumar Singh
Currently, firmware stats, comprising pdev, vdev and beacon stats are part of debugfs. In firmware pdev stats, firmware reports the final Tx power used to transmit each packet. If driver wants to know the final Tx power being used at firmware level, it can leverage from firmware pdev stats. Move firmware stats out of debugfs context in order to leverage the final Tx power reported in it even when debugfs is disabled. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250306102215.1300522-2-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-11wifi: ath12k: Add peer extended Rx statistics debugfs supportKarthikeyan Periyasamy
Currently, peer extended Rx statistics are not supported. Therefore, expose peer extended Rx statistics support through debugfs, allowing users to enable or disable the collection of statistics information. After that the statistics information can be dumped through debugfs. Below are the debugfs commands exposed. Enable/Disable: echo <1/0> > /sys/kernel/debug/ieee80211/phyX/ath12k/ext_rx_stats Dump: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/<peer MAC addr>/rx_stats Sample output: ============== RX peer stats: Num of MSDUs: 1087 Num of MSDUs with TCP L4: 0 Num of MSDUs with UDP L4: 13 Num of other MSDUs: 1074 Num of MSDUs part of AMPDU: 363 Num of MSDUs not part of AMPDU: 724 Num of MSDUs using STBC: 0 Num of MSDUs beamformed: 0 Num of MPDUs with FCS ok: 695 Num of MPDUs with FCS error: 0 preamble: 11A 395 11B 0 11N 0 11AC 0 11AX 692 11BE 0 reception type: SU 1087 MU_MIMO 0 MU_OFDMA 0 MU_OFDMA_MIMO 0 TID(0-15) Legacy TID(16):690 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 395 RX Duration:39537 DCM: 0 RU26: 0 RU52: 0 RU106: 0 RU242: 0 RU484: 0 RU996: 0 RX success packet stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 1 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 66 MCS 7: 46 MCS 8: 46 MCS 9: 34 MCS 10: 28 MCS 11: 471 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 395 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 1086 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 396 1.6 us 691 3.2 us 0 BW: 20 MHz 785 40 MHz 2 80 MHz 300 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:5 7:3 8:3 9:4 10:4 11:374 12:391 40 Mhz gi 1 us 1x1 : 12:2 80 Mhz gi 1 us 1x1 : 6:61 7:43 8:43 9:30 10:24 11:97 12:2 RX success byte stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 41 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 1435 MCS 7: 943 MCS 8: 697 MCS 9: 533 MCS 10: 492 MCS 11: 8159 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 16195 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 28454 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 16236 1.6 us 12259 3.2 us 0 BW: 20 MHz 24108 40 MHz 82 80 MHz 4305 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:205 7:123 8:123 9:164 10:164 11:7257 12:16031 40 Mhz gi 1 us 1x1 : 12:82 80 Mhz gi 1 us 1x1 : 6:1230 7:820 8:574 9:369 10:328 11:902 12:82 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-10-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support to Calculate and Display TPC ValuesSowmiya Sree Elavalagan
Transmit Power Control(TPC) stats should display per chain TPC value per radio. Add debugfs support to read and display TPC stats type and TPC stats. Take power values for each preamble type, rate and NSS combination from a particular index from each power arrays based on number of chains, NSS, modes, MCS and tx beamforming enabled/disabled parameters. Minimum of the values taken from reg power table, rates and Conformance Test Limit(CTL) array table should give the TPC which is in 0.25 dBm steps. Sample Output: ------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats *************** TPC config ************** * powers are in 0.25 dBm steps reg domain-22 chan freq-5955 power limit-126 max reg-domain Power-252 No.of tx chain-4 No.of rates-1164 **************** SU WITH TXBF **************** TPC values for Active chains Rate idx Preamble Rate code 1-Chain 2-Chain 3-Chain 4-Chain 4 OFDM 0x000 39 15 1 -9 5 OFDM 0x001 39 15 1 -9 ..... 12 HT20 0x200 40 16 2 -8 13 HT20 0x201 40 16 2 -8 ..... 44 HT40 0x200 88 88 88 88 45 HT40 0x201 88 88 88 88 ..... 76 VHT20 0x300 40 16 2 -8 77 VHT20 0x301 40 16 2 -8 ..... 172 VHT40 0x300 88 88 88 88 173 VHT40 0x301 88 88 88 88 ..... 412 HE20 0x400 88 88 88 88 413 HE20 0x401 88 88 88 88 ..... 508 HE40 0x400 76 76 76 76 509 HE40 0x401 76 76 76 76 ..... 748 EHT20 0x50e 88 88 88 88 749 EHT20 0x50f 88 88 88 88 ..... 812 EHT40 0x50e 88 88 88 88 813 EHT40 0x50f 88 88 88 88 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250130061104.962124-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support to Parse TPC Event from FirmwareSowmiya Sree Elavalagan
Host receives four Transmit Power Control(TPC) events from firmware on sending TPC request. Fixed param TLV is present as part of all event to indicate the event count and end of event. TPC config parameters along with regulatory power array comes as first event. Rates array comes as second and third event as it cannot be packed in single event. Conformance Test Limit (CTL) power array comes as the fourth event. Firmware packs different sets of array params which includes array length and type inside master TLV as different subtlvs. And the actual content of array is packed one after the other inside a separate TLV as single buffer. Parse various events and save it in local structures. Create tpc_stats file using debugfs to store these local structures. Create function to handle TPC stats read to relay the information to the user. Command usage: cat > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250130061104.962124-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request pdev stats from firmwareRamya Gnanasekar
Add support to request pdev stats from firmware through WMI and print the information Sample Output: ------------- cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/pdev_stats ath12k PDEV stats ================= Channel noise floor -85 Channel TX power 126 TX frame count 0 RX frame count 8637 RX clear count 37424 Cycle count 4372024 PHY error count 0 soc drop count 0 ath12k PDEV TX stats ==================== HTT cookies queued 0 HTT cookies disp. 0 MSDU queued 0 MPDU queued 0 MSDUs dropped 0 Local enqued 0 Local freed 0 HW queued 0 PPDUs reaped 0 Num underruns 0 PPDUs cleaned 0 MPDUs requeued 0 Excessive retries 0 HW rate 0 Sched self triggers 0 Dropped due to SW retries 0 Illegal rate phy errors 0 PDEV continuous xretry 0 TX timeout 9 PDEV resets 0 Stateless TIDs alloc failures 0 PHY underrun 0 MPDU is more than txop limit 0 ath12k PDEV RX stats ==================== Mid PPDU route change 0 Tot. number of statuses 0 Extra frags on rings 0 0 Extra frags on rings 1 0 Extra frags on rings 2 0 Extra frags on rings 3 0 MSDUs delivered to HTT 0 MPDUs delivered to HTT 0 MSDUs delivered to stack 0 MPDUs delivered to stack 0 Oversized AMSUs 0 PHY errors 0 PHY errors drops 0 MPDU errors (FCS, MIC, ENC) 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-4-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request beacon stats from firmwareRamya Gnanasekar
Add support to request and dump beacon statistics from firmware Sample output: ------------- cat /sys/kernel/debug/ath12k/pci-0000:06:00.0/mac0/fw_stats/beacon_stats ath12k Beacon stats (1) =================== VDEV ID 0 VDEV MAC address 00:03:7f:04:37:58 ================ Num of beacon tx success 20 Num of beacon tx failures 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-3-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request vdev stats from firmwareRamya Gnanasekar
Add support to request and print vdev stats from firmware through WMI. Sample output: ------------- cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/vdev_stats ath12k VDEV stats ================= VDEV ID 0 VDEV MAC address 00:03:7f:6c:9c:1a beacon snr 96 data snr 255 num rx frames 0 num rts fail 0 num rts success 0 num rx err 0 num rx discard 0 num tx not acked 0 num tx frames [00] 0 num tx frames [01] 0 num tx frames [02] 0 num tx frames [03] 2 num tx frames retries [00] 0 num tx frames retries [01] 0 num tx frames retries [02] 0 num tx frames retries [03] 0 num tx frames failures [00] 0 num tx frames failures [01] 0 num tx frames failures [02] 0 num tx frames failures [03] 0 tx rate history [00] 0x00000000 tx rate history [01] 0x00000000 tx rate history [02] 0x00000000 tx rate history [03] 0x00000000 tx rate history [04] 0x00000000 tx rate history [05] 0x00000000 tx rate history [06] 0x00000000 tx rate history [07] 0x00000000 tx rate history [08] 0x00000000 tx rate history [09] 0x00000000 beacon rssi history [00] 0 beacon rssi history [01] 0 beacon rssi history [02] 0 beacon rssi history [03] 0 beacon rssi history [04] 0 beacon rssi history [05] 0 beacon rssi history [06] 0 beacon rssi history [07] 0 beacon rssi history [08] 0 beacon rssi history [09] 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-2-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-10-11wifi: ath12k: switch to using wiphy_lock() and remove ar->conf_mutexKalle Valo
Switch from using driver specific ar->conf_mutex to wiphy->mtx. The benefits are: * one lock less and simplified locking * possibility to use wiphy_work_queue() without other locks Most of the mac80211 ops are called within wiphy_lock(), most notable exception being tx op. This can be checked with lockdep_assert_wiphy() from net/mac80211/driver-ops.[ch] and I veried that by manually going through all the ops in ath12k_ops which had lockdep_assert_wiphy(). The conversion was simple: * All conf_mutex lock() and unlock() calls which already were called under wiphy_lock() I replaced with lockdep_assert_wiphy(). * The rest of conf_mutex calls I replaced with wiphy_lock() and wiphy_unlock(). * All lockdep_asset_held(conf_mutex) calls I replaced with lockdep_assert_wiphy(). One exception was in ath12k_core_post_reconfigure_recovery() where the wiphy lock needs to be taken before hw_mutex to avoid a lockdep warning. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241007165932.78081-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-07-01wifi: ath12k: Add support to enable debugfs_htt_statsDinesh Karthikeyan
Create debugfs_htt_stats file when ath12k debugfs support is enabled. Add basic ath12k_debugfs_htt_stats_register and handle htt_stats_type file operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-2-quic_rgnanase@quicinc.com
2024-06-11wifi: ath12k: handle symlink cleanup for per pdev debugfs dentryAditya Kumar Singh
Whenever per pdev debugfs directory is created, a symlink to it is also placed in ieee80211/phy* directory. During clean up of per pdev debugfs, this symlink also needs to be cleaned up. Add changes to clean up the symlink whenever the per pdev debugfs is removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529043043.2488031-4-quic_adisi@quicinc.com
2024-06-11wifi: ath12k: unregister per pdev debugfsAditya Kumar Singh
During normal de-initialization path or if any error happens while registering the hardware, there is no support to unregister the per pdev debugfs. Add support for the same. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529043043.2488031-3-quic_adisi@quicinc.com
2024-04-04wifi: ath12k: debugfs: radar simulation supportRamya Gnanasekar
Create dfs_simulate_radar debugfs in ath12k debugfs directory. Usage: echo 1 > /sys/kernel/debug/ath12k/pci-0000:06:00.0/mac0/dfs_simulate_radar This debugfs helps user to simulate RADAR interference in run time. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320171305.655288-3-quic_rgnanase@quicinc.com
2024-04-04wifi: ath12k: initial debugfs supportRamasamy Kaliappan
The initial debugfs infra bringup in ath12k driver and create the ath12k debugfs and soc-specific directories in /sys/kernel/debug/ For each ath12k device, directory will be created in <bus>-<devname> schema under ath12k root directory. Example with one ath12k device: /sys/kernel/debug/ath12k/pci-0000:06:00.0 ath12k `-- pci-0000:06:00.0 |-- mac0 To enable ath12k debugfs support (CONFIG_ATH12K_DEBUGFS=y) Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320171305.655288-2-quic_rgnanase@quicinc.com