| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty and serial driver updates for 7.4-rc1.
It's not really all that big, it's been kind of quiet in this area of
the tree this development cycle in relation to other parts of the
tree. But still, included in here are:
- 8250 port updates and fixes
- 8250 driver cleanups by Jiri
- deletion of the obsolete moxa driver (making this pull request
remove more lines than added!)
- different serial driver updates for dma and other reported issues
All of these have been in linux-next with no reported problems"
* tag 'tty-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (91 commits)
tty: hvc: dcc: Detect JTAG connection only on CPU core 0
serial: earlycon: Use isdigit() in earlycon_init()
serial: core: Use isdigit() in uart_parse_options()
dt-bindings: serial: snps-dw-apb-uart: Add Synaptics sl2610 uart
serial: amba-pl011: drive the bus during break in RS485 mode
serial: mcf: update author email address
serial: pmac_zilog: report received breaks
serial: pmac_zilog: push received data to the port that received it
serial: amba-pl011: keep transmitter enabled when disabling RS485
serial: ma35d1: Do not force-enable an unselected console
serial: amba-pl011: honour delay_rts_before_send for every write
Revert "serial: 8250_port: Drop duplicate NULL check"
serial: 8250: make port operations work on struct uart_8250_port
serial: 8250_omap: set priv->line before enabling the IRQ
serial: 8250_lpss: do not touch uninitialized line in ehl_serial_exit()
serial: 8250_exar: store the GPIO platform device in struct exar8250
serial: 8250_exar: remove useless void * casts
serial: 8250: drop err label from serial8250_register_8250_port()
serial: core: fix TIOCSSERIAL and TIOCSERCONFIG on uninitialised ports
serial: max310x: don't transmit while an RS485 reconfigure is pending
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This includes a significant number of low-priority fixes - especially
in the NIC drivers area - that we deferred from the last few RCs in
the previous cycle, which can't be easily outlined in the synopsis
below.
Core & protocols:
- Continue the work on removing rtnl_lock dependencies:
- per-netns ARP and ND neighbour tables, with the default settings
now configurable per netns (inheritance from init_net is
controlled by the new net.core.neigh_inherit_init_net sysctl)
- RCU-protected configuration and rtnl_lock-less fill_info() for
hsr, netkit, sit, vlan and vxlan devices
- per-netns device unregistration for ip tunnel and gre devices
- use the netdev instance lock instead of rtnl_lock when reading
speed and duplex via sysfs
- batch the flushing of uncached routes at device unregistration
time, relieving rtnl_lock contention on netns dismantle.
- Add hardware pacing offload support, admin-controlled via a new
rtnetlink attribute, with sch_fq integration (implemented in idpf).
- Re-segment BIG TCP GSO packets into GSO packets fitting the egress
device limits instead of plain MSS-sized segments, improving
throughput for mixed BIG TCP / non-BIG TCP paths by up to 70%.
- Generate RSS keys that spread flows over all the RX queues; the
previous random keys could leave some queues unused.
- Optimize the bridge VLAN forwarding paths: cache the port-VLAN in
fdb entries and consider only VLAN members when flooding, for ~10%
more Mpps in the fdb forwarding path.
- A few TCP/IP performance improvements aimed at efficient cache
usage and reducing contention.
- Add the TCP ROCCET congestion control, a CUBIC variant aimed at
avoiding bufferbloat in cellular networks.
- Continue the conversion of getsockopt callbacks to sockopt_t.
- Add an ethtool command to list the front-facing ports of an
interface, including SFP cages and modules, using the phy_port
representation.
- Enable BIG TCP support for bareudp tunnels.
- Remove the IPV6_ADDRFORM socket option and disallow buggy TCP state
transitions (listen() + shutdown() + connect() and connect() +
connect(AF_UNSPEC) + listen()).
- Remove most BUG_ON()s from core packet processing, replacing them
with error paths.
Wireless:
- Latency improvements, including lockless station get/dump and
beacon updates, plus RTNL reduction and locking cleanups.
- Infrastructure for non-station TX/RX with MLO.
- NAN (Wi-Fi Aware) Instant Communication support and other NAN
improvements.
- Control frame Integrity Protocol (CIP) and protected TWT support.
- Improvements for AP regulatory checks.
Netfilter:
- Disable br_netfilter in user namespaces and schedule it for removal
in 2027.
- Restrict the raw table in nft_compat to the specific family, hook
and priority.
- Prepare the flowtable for mixed IPv4-over-IPv6 tunneling (and vice
versa).
- Use GFP_KERNEL_ACCOUNT for most netfilter allocations, for better
integration with memcg.
- Allow discovering conntrack zone filtering support in ctnetlink
dumps, and fix nfnetlink_hook handling of large dumps.
Deletions:
- Move the LLC type 2 sockets out of tree. There are no known users
and the code attracts a never-ending stream of LLM-driven fixes.
Device drivers:
- New drivers:
- Meta Platforms NIC (mpnic), the second-generation NIC from Meta
- initial skeleton of the Nebula-matrix NICs driver (nbl)
- X-Powers AC200/AC300 Fast Ethernet PHYs
- Ethernet high-speed NICs:
- Intel:
- i40e: XDP metadata support for RX hash and VLAN tag
- ice: expose the E825 TSPLL state via the DPLL subsystem
- nVidia/Mellanox:
- move the data direct infrastructure from IB to core, in
preparation for netdev support.
- reduce the memory used per offloaded TC rule
- Meta (fbnic):
- support large io_uring zero-copy RX buffers
- Microsoft vNIC (mana):
- add BQL support
- Ethernet NICs consumer, and embedded:
- Airoha:
- LRO offload support
- Cadence (macb):
- context swapping for ringparam and MTU changes, avoiding
buffer loss under memory pressure
- Mucse (rnpgbe):
- TX/RX and link status support
- NXP (enetc):
- SR-IOV improvements and VF support for ENETC v4
- Qualcomm (ppe):
- IPQ5424 support
- Realtek PCI (r8169):
- phylink support
- RSS support for RTL8127
- Renesas (ravb):
- gPTP support for R-Car Gen4
- Synopsys (stmmac):
- XDP multi-buffer support on the TX side
- tc mqprio hw queue priority offload
- support for RK3568 SGMII, Allwinner H616 EMAC1, UltraRISC
DP1000 and Qualcomm sa8255p
- Ethernet switches:
- Mediatek (mt7530):
- fast age and change conduit support
- Microchip (ksz):
- support for KSZ8995XA/KS8995XA
- Microchip (lan966x):
- PCIe FDMA support, ~20x throughput increase in PCIe endpoint
- Microchip (sparx5):
- Time Aware Shaper (taprio) offload
- Motorcomm (yt921x):
- LED and SerDes PCS support
- Realtek (rtl8365mb):
- EEE support
- Ethernet PHYs:
- Broadcom:
- enable jumbo frames on BCM54xx
- Realtek:
- support for RTL8261CE_CG and RTL8261D_VM
- MDIO support for RTL838x and RTL839x
- WiFi drivers:
- Broadcom (brcmfmac):
- FT/OKC roaming offload
- Intel (iwlwifi):
- UHR sniffer support
- support for newer UEFI/BIOS tables
- MediaTek (mt76):
- mt7925 NAN improvements
- offchannel/scan improvements and MLO fixes
- Morse Micro (mm81x):
- monitor mode support
- Qualcomm (ath12k):
- IPQ5332 platform infrastructure
- Realtek (rtw88):
- RTL8723BS support
- SDIO TX performance improvements
- Realtek (rtw89):
- P2P_DEVICE support
- BT-coex updates for RTL8922D
- Bluetooth:
- move H:4 reassembly into the Bluetooth core
- add generic support for vendor packets
- MGMT: add security level changed event
- Bluetooth drivers:
- btusb: support Bulk Serialization Mode
- Intel: support Draco and Titan Lake, allow unsigned firmware
- Mediatek: MT7928 support
- Qualcomm: QCC2072 support
- Broadcom: Synaptics 4384 support"
* tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2126 commits)
Bluetooth: btusb: disable by default Qualcomm multi-subsystem
tipc: fix broadcast sender hang on last acker departure
tipc: fix use-after-free of broadcast reception link at node release
r8169: clear TX LPI on RTL8168h at link up after phylink conversion
tun: Require CAP_NET_ADMIN to attach to an ownerless device
net/sched/sch_cake: drop dead nla_nest_end() error check
net/sched/sch_cake: widen buffer_used to u64
net/sched/sch_cake: reduce parent backlog when clearing a tin
net/sched/sch_cake: serialize reconfiguration with the datapath
tg3: Add Datto SIRIS 5 1U Server to restart AER quirk table
net/mlx5e: Stop asserting for RTNL when closing channels
net: shrink the payload-only part of skb dataref to one bit
net: wwan: iosm: validate msg_head before indexing msg_ring
net: bgmac: rate limit RX error messages
selftests: net: veth: test XDP_TX to a peer with GRO enabled
veth: schedule the peer's NAPI after XDP_TX when only GRO is enabled
pppoe: delete session hash entries by pointer match
net: lan969x: don't disable hardirqs in fdma tx clear
net: sparx5/lan969x: do not clobber the PSFP cycle timer update period
net: lan969x: fix DSM calendar for empty taxis
...
|
|
sdio_uart is an SDIO function driver, not part of the MMC/SDIO core.
Keeping it in drivers/mmc/core/ is misplaced: it registers to the SDIO
bus (sdio_register_driver) and only uses the public SDIO API from
include/linux/mmc/, with no dependency on any mmc core internals.
Other SDIO function drivers live under their respective functional
subsystem, e.g. the SDIO WiFi drivers are under drivers/net/wireless/.
sdio_uart should likewise be placed under its functional subsystem, tty,
just like the PCIe and I2C/SPI transport drivers (men_z135_uart,
sc16is7xx, max310x) that live under drivers/tty/serial/.
Historically almost all changes to this driver were tty API changes
(e.g. tty_operations adjustments, alloc_tty_driver removal), yet
scripts/get_maintainer.pl never listed the TTY maintainers while the
file lived under drivers/mmc/core/. Moving it under drivers/tty/serial/
makes get_maintainer.pl report the proper TTY/serial maintainers and
reviewers, which benefits future maintenance of this driver.
No functional change. The CONFIG_SDIO_UART symbol is intentionally kept
unchanged to avoid breaking existing configs; the dependency is updated
to 'TTY && MMC' accordingly.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1791626517-18161-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add mmc_send_tuning_timeout() which takes the data timeout in
milliseconds, and turn mmc_send_tuning() into a thin wrapper keeping
the current 150 ms, so there is no behaviour change for the existing
callers. This lets drivers pass a tighter timeout for software
tuning, e.g. hosts which scan the tuning window phase by phase.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The NXP IW610 SDIO chipset identifies itself with a base card ID
(0x0214) during the initial MMC bus scan, whereas the WLAN function
reports a different ID (0x0215).
Like the IW61x, the IW610 requires MMC_QUIRK_BLKSZ_FOR_BYTE_MODE for
correct byte-mode block size handling. Since SDIO fixups are applied
before function devices are enumerated, the quirk must be associated
with the base card ID rather than the WLAN function ID.
Add the SDIO_DEVICE_ID_NXP_IW610_BASE definition and apply the required
fixup in the SDIO quirk table.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Acked-by: Ulf Hansson <ulfh@kernel.org>
|
|
Two comments still refer to mmc_start_req(). That function was renamed
to mmc_start_areq() then removed.
So, let's update the mmc_is_req_done() and mmc_pre_req() comments to refer
to the current APIs: mmc_start_request() and mmc_wait_for_req().
Signed-off-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
As there are no longer any users of these functions, let's make them
internal to the mmc core. While at it, let's also flip the order of the
in-parameters to mmc_alloc_host() to be consistent with devm_alloc_host().
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Merge the mmc fixes for v7.3-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
mmc_of_find_child_device() returns a device node with its reference count
incremented. mmc_add_card() stores the reference before calling
device_add(), while the card is marked present only after device_add()
succeeds.
If device_add() fails, the callers release the card through
mmc_remove_card(). However, mmc_remove_card() only drops the OF node
reference for a present card, leaking the reference on this error path.
Move of_node_put() outside the present-card conditional so the reference
is released for both registered cards and card-add failures.
Fixes: 25185f3f31c9 ("mmc: Add SDIO function devicetree subnode parsing")
Cc: stable@vger.kernel.org
Signed-off-by: Zhu Ling <zhuling0805@qq.com>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The register context for the crypto profile belongs to the sdhci/cqhci host
and not the mmc card, hence re-programming should be managed by the host
driver itself.
Add the flag MMC_CAP2_CRYPTO_NO_REPROG as part of host->caps2 to control
reprogramming keys to crypto engine for SoCs which do not require this
feature.
Signed-off-by: Seshu Madhavi Puppala <quic_spuppala@quicinc.com>
Co-developed-by: Ram Prakash Gupta <quic_rampraka@quicinc.com>
Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com>
Co-developed-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Debraj Mukhopadhyay <quic_dmukhopa@quicinc.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error.
Fixes: 8b197a5ce7a7 ("sdio_uart: Use kfifo instead of the messy circ stuff")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Merge the mmc fixes for v7.3-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add support for power-off-delay-us which shall be used to specify
value of delay after deasserting power during MMC power cycles.
Default for delay is 1000us but custom delay can be passed in to work
around hardware issues such as slow RC discharge on MMC VDD rails.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool.
Fixes: 682696605c70 ("mmc: sdio: Add API to manage SDIO IRQs from a workqueue")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
When copying the info strings and generating a char ** list copy all the
strings into the kmalloced buffer outside the loop and use strchr(str, 0)
to find the next string inside the loop.
Removes some strcpy() that static tools might think are unbounded.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Reject invalid perdev_minors for the block device before division
- Document DT fixed-layout NVMEM provider support for eMMC cards
MMC host:
- Convert a couple of plain text DT bindings to the yaml format
- bcm2835: DMA mapping improvements
- cqhci: Fix sparse warnings for endian conversions
- dw_mmc: Stop and complete DMA also in busy state
- dw_mmc-rockchip: Add support for the RV1106 variant
- litex_mmc: Add dynamic bus width support
- moxart: Propagate error for DMA completion timeout
- pxamci: Remove PXA remnants for the PXA93x support
- rtsx_usb_sdmmc: Avoid USB I/O in runtime autosuspend
- rtsx_usb_sdmmc: Suppress false CD after init timeout
- sdhci_am654: Add Judith Mendez as maintainer
- sdhci-esdhc-mcf: Do not use readl()/writel() on ColdFire
- sdhci-msm: Extend the DT bindings for ICE
- sdhci-tegra: Add support for Tegra264/Tegra238 variants
- sunxi: Add support for the Allwinner A733 variant
- via-sdmmc: Clean up card detect work at remove and in probe error path"
* tag 'mmc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (35 commits)
ARM: PXA: Fix build error for PXA93x
dt-bindings: mmc: sunxi: add compatible string for Allwinner A733 MMC0/1/2
dt-bindings: mmc: Document fixed-layout NVMEM provider support
mmc: sdhci-tegra: Add Tegra264 SoC data
dt-bindings: mmc: tegra: Document Tegra264 SDHCI
mmc: sdhci-tegra: Add Tegra238 SoC data
dt-bindings: mmc: tegra: Document Tegra238 SDHCI
mmc: omap_hsmmc: use platform_get_irq_optional for wake IRQ
mmc: via-sdmmc: cancel card-detect work on remove
mmc: via-sdmmc: stop card-detect handling on probe failure
mmc: moxart: use platform helpers for resource and IRQ
mmc: host: Remove redundant dev_err()/dev_err_probe()
mmc: bcm2835: DMA mapping improvements
mmc: dw_mmc: move declaration of dw_mci_pmops
dt-bindings: mmc: rockchip-dw-mshc: Add RV1106 compatible
mmc: rtsx_usb_sdmmc: suppress false CD after init timeout
misc: rtsx_usb: avoid USB I/O in runtime autosuspend
mmc: sdhci-of-dwcmshc: Log eMMC reset calls
mmc: block: reject invalid perdev_minors before division
mmc: sdhci-of-ma35d1: add missing MODULE_DEVICE_TABLE()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next-2026-07-26
Mostly driver changes this time:
- new driver mm81x for an S1G device
- new driver nxpwifi for NXP devices
(mostly forked off from mwifiex)
- ath12k: much kernel infrastructure integration work
- brcmfmac: DPP support, some Cypress part update
- nl80211: per-link statistics support
====================
Link: https://patch.msgid.link/20260726105205.942922-60-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mmcblk.perdev_minors module parameter is parsed as a signed int and
is used during mmc_blk_init() to compute the number of supported block
devices.
Passing perdev_minors=0 makes the init path divide by zero when it
computes max_devices. Negative values are invalid as well and would make
max_devices negative before it is later used as an IDA limit.
Reject non-positive perdev_minors values before registering any mmcblk
resources.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The NXP IW61x series SDIO chipset identifies itself with a base card ID
(0x0204) during the initial MMC bus scan, while the specific WLAN
function reports a different ID (0x0205).
To ensure that the MMC_QUIRK_BLKSZ_FOR_BYTE_MODE quirk is correctly
inherited by all SDIO functions (including Wi-Fi), it must be attached
to the base card ID at the core level.
Add the SDIO_DEVICE_ID_NXP_IW61X_BASE definition and apply the required
fixup in the SDIO quirk table.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
Merge the mmc fixes for v7.2-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Since commit 7852028a35f0 ("mmc: block: register RPMB partition with
the RPMB subsystem"), each mmc RPMB partition is represented by two
device objects:
- the mmc-owned device (`rpmb->dev`, backing the legacy /dev/mmcblkXrpmb
char device) and
- the rpmb-core device (`rdev`, backing /dev/rpmbN).
The child RPMB device holds a reference to its parent, so the
parent's release callback cannot be invoked if the child device
is still registered.
Remove rpmb_dev_unregister() from the parent release handler and
unregister the child RPMB device in the remove path before tearing
down the parent device.
Also delete the extra blank line between mmc_blk_remove_rpmb_part()
and {.
Fixes: 7852028a35f0 ("mmc: block: register RPMB partition with the RPMB subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Jiazi Li <jiazi.li@transsion.com>
Signed-off-by: Ao Sun <ao.sun@transsion.com>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Fix logic issues introduced by the kzalloc_flex() conversion in
mmc_test_alloc_mem() due to interaction with the __counted_by
annotation on the flexible array.
Bounds-checking sanitizers rely on the counter field reflecting the
allocated array size before any array access occurs. However, use
mem->cnt both as the allocation size and as the runtime insertion
index, causing incorrect indexing and potentially invalid bounds
tracking.
Initialize mem->cnt to the maximum allocated number of segments
immediately after kzalloc_flex(), then use a separate local index
variable to track successfully allocated entries. Update mem->cnt to
the actual number of initialized elements before returning or entering
the cleanup path.
Also rewrite mmc_test_free_mem() to use a forward for-loop, improving
readability and ensuring only initialized entries are freed.
Fixes: c3126dccfd7b ("mmc: mmc_test: use kzalloc_flex")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
sd_enable_cache() allocates a 512-byte buffer that is never used, hence
let's just drop it.
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Per-controller admin and IO timeout sysfs attributes, and
letting the block layer set request timeouts (Maurizio,
Maximilian)
- Multipath passthrough iostats, and PCI P2PDMA enablement for
multipath devices (Keith, Kiran)
- A new diag sysfs attribute group exporting per-controller
counters (retries, multipath failover, error counters, requeue
and failure counts, reset and reconnect events) (Nilay)
- FDP configuration validation and bounds check fixes (liuxixin)
- Various nvmet fixes, including a pre-auth out-of-bounds read in
the Discovery Get Log Page handler, auth payload bounds
validation, and tcp error-path leak fixes (Bryam, Tianchu,
Geliang)
- nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
Eric)
- Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
Achkinazi, Wentao)
- MD pull request via Yu Kuai:
- raid1/raid10 fixes for a deadlock in the read error recovery
path, error-path detection and bio accounting with cloned bios,
and an nr_pending leak in the REQ_ATOMIC bad-block error path
(Abd-Alrhman)
- PCI P2PDMA propagation from member devices to the RAID device
(Kiran)
- dm-raid bio requeue fix, and various smaller fixes and cleanups
(Benjamin, Chen, Li, Thorsten)
- Enable Clang lock context analysis for the block layer, with the
accompanying annotations across queue limits, the blk_holder_ops
callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)
- Block status code infrastructure work: a tagged status table, a
str_to_blk_op() helper, a bio_endio_status() helper, and on top of
that a new configurable block-layer error injection facility
(Christoph)
- DRBD netlink rework, replacing the genl_magic machinery with explicit
netlink serialization and moving the DRBD UAPI headers to
include/uapi/linux/ (Christoph Böhmwalder)
- bvec improvements: a bvec_folio() helper and making the bvec_iter
helpers proper inline functions (Willy, Christoph)
- ublk cleanups and a canceling-flag fix for the disk-not-allocated
case (Caleb, Ming)
- Partition handling fixes: bound the AIX pp_count scan, fix an of_node
refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
Wentao, Mike)
- Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
WQ_PERCPU to the block workqueue users (Mateusz, Marco)
- Block statistics and tracing: propagate in-flight to the whole disk
on partition IO, export passthrough stats, and a new
block_rq_tag_wait tracepoint (Tang, Keith, Aaron)
- A round of removals, unexports and cleanups across bio, direct-io and
the bvec helpers (Christoph)
- Various driver fixes (mtip32xx use-after-free, rbd snap_count
validation and strscpy conversion, nbd socket lockdep reclassify,
virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
email/list updates (Coly, Li, Yu, Christoph Böhmwalder)
- Other little fixes and cleanups all over
* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
MAINTAINERS: Update Coly Li's email address
block: check bio split for unaligned bvec
nbd: Reclassify sockets to avoid lockdep circular dependency
block: add configurable error injection
block: add a str_to_blk_op helper
block: add a "tag" for block status codes
block: add a macro to initialize the status table
floppy: Drop unused pnp driver data
block: propagate in_flight to whole disk on partition I/O
virtio-blk: clamp zone report to the report buffer capacity
block: optimize I/O merge hot path with unlikely() hints
drivers/block/rbd: Use strscpy() to copy strings into arrays
partitions: aix: bound the pp_count scan to the ppe array
block: Enable lock context analysis
block/mq-deadline: Make the lock context annotations compatible with Clang
block/Kyber: Make the lock context annotations compatible with Clang
block/blk-mq-debugfs: Improve lock context annotations
block/blk-iocost: Inline iocg_lock() and iocg_unlock()
block/blk-iocost: Split ioc_rqos_throttle()
block/crypto: Annotate the crypto functions
...
|
|
numa_node in blk_mq_hw_ctx and the matching argument of
blk_mq_ops::init_request can be NUMA_NO_NODE (-1). Declared as
unsigned int, NUMA_NO_NODE becomes UINT_MAX and walks off
nvme_dev::descriptor_pools[] on CONFIG_NUMA=n [1].
Switch the field and the callback prototype to int and update all
in-tree init_request implementations. No functional change:
cpu_to_node(), kmalloc_node() and blk_alloc_flush_queue() already
take int.
Link: https://lore.kernel.org/linux-nvme/20260522150628.399288-1-mateusz.nowicki@posteo.net/ [1]
Link: https://lore.kernel.org/linux-nvme/20260309062840.2937858-2-iam@sung-woo.kim/
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Sung-woo Kim <iam@sung-woo.kim>
Signed-off-by: Mateusz Nowicki <mateusz.nowicki@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260523125210.272274-1-mateusz.nowicki@posteo.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge the mmc fixes for v7.1-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When using the fixed-emmc-driver-type device tree property, the MMC core
correctly selects the driver strength for the card but fails to program
the host controller accordingly. This causes a mismatch where the card
uses the specified driver type while the host controller defaults to
Type B (since ios->drv_type remains zero).
Split the driver type programming logic to handle both fixed and dynamic
driver type selection paths. For fixed driver types, program the host
controller with the selected drive_strength value. For dynamic selection,
use the existing drv_type as before.
This ensures both the eMMC device and host controller use matching driver
strengths, preventing potential signal integrity issues.
Fixes: 6186d06c519e ("mmc: parse new binding for eMMC fixed driver type")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The max_segs field is of type unsigned short, and if a host driver
sets an excessively large value, it may be truncated to zero. This
can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size
allocation request, which leads to undefined behavior.
Under the SLUB allocator, kmalloc(0) returns a special pointer
(ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to
true, and sg_init_table() will then attempt to access invalid memory,
resulting in a crash:
dwmmc_rockchip 2a310000.mmc: Successfully tuned phase to 133
mmc1: new UHS-I speed SDR104 SDHC card at address aaaa
Unable to handle kernel paging request at virtual address 0000001ffffffff0
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102c88000
[0000001ffffffff0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 2 UID: 0 PID: 102 Comm: kworker/2:1 Not tainted 7.0.0-rc6-next-20260331-00013-g4d93c25963c5-dirty #80 PREEMPT
Hardware name: Rockchip RK3576 EVB V10 Board (DT)
Workqueue: events_freezable mmc_rescan
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sg_init_table+0x2c/0x50
lr : sg_init_table+0x24/0x50
sp : ffff8000837db710
x29: ffff8000837db710 x28: 000000000000c000 x27: 0000000000000300
x26: 0000000000000000 x25: 0000000000000040 x24: ffff0000c46a0000
x23: 0000000000000000 x22: ffff0000c0c73c00 x21: 0000000000000010
x20: 0000000000000010 x19: 0000000000000000 x18: 000000000000002c
x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000
x14: 0000000000000400 x13: ffff8000837dc000 x12: 0000000000000000
x11: ffff0000c0c73ca0 x10: 0000000000000040 x9 : 459ec1f0abbdbb00
x8 : 0000001fffffffe0 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000035579 x4 : 0000000000000901 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000010
Call trace:
sg_init_table+0x2c/0x50 (P)
mmc_mq_init_request+0x64/0x90
blk_mq_alloc_map_and_rqs+0x3ac/0x480
blk_mq_alloc_set_map_and_rqs+0x98/0x1e0
blk_mq_alloc_tag_set+0x1c0/0x290
mmc_init_queue+0x120/0x370
mmc_blk_alloc_req+0x150/0x420
To prevent this, add a validation check in mmc_mq_init_request() to
detect when sg_len (derived from max_segs) is zero. If sg_len is zero,
we return an error and print an error message, allowing host driver
developers to identify and fix incorrect max_segs configuration.
This is a defensive measure that ensures the MMC core fails gracefully
when host drivers provide invalid max_segs values, rather than crashing
with a page fault.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for-each loop when iterating over device nodes to simplify the
code, but also to ensure the device node reference is automatically
released when the loop scope ends.
Signed-off-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
ioc_count won't be more than MMC_IOC_MAX_CMDS (255), retries won't be more
than MMC_NO_RETRIES (6), flags is newly introduced and uses only 1 bit.
Therefore let's change them all to become u8.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently, the code uses the MQRQ_XFER_SINGLE_BLOCK flag to handle write
failures by retrying with single-block transfers. However, read failures
bypass this mechanism and instead use a dedicated legacy path mmc_blk_read_single()
that performs sector-by-sector retries.
Extend the MQRQ_XFER_SINGLE_BLOCK logic to cover multi-block read failures
as well. By doing so, we can remove the redundant and complex mmc_blk_read_single()
function, unifying the retry logic for both read and write operations under
a single, consistent, easier-to-maintain mechanism.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
parameters
Replacing hard-coded values with standardized macros to improve code clarity,
simplify future maintenance.
Meanwhile, introduce global bs and sg_len arrays for block sizes and SG lengths,
eliminating redundant local definitions in multiple test functions.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Convert to use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() to drop the
CONFIG_PM_SLEEP to handle the conditional compilation when PM support is
disabled. This allows the compiler to automatically optimize away the
unused code paths when CONFIG_PM_SLEEP is not selected.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
These shift-by-9 operations are for converting between bytes and sectors.
Use the SECTOR_SHIFT macro to improve code readability and maintainability.
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Currently, the mmc_host_class_dev_pm_ops and its callback
functions are wrapped in #ifdef CONFIG_PM_SLEEP to handle the
conditional compilation when PM support is disabled.
Replace this #ifdef usage with the standard pm_ptr() helpers. This
allows the compiler to automatically optimize away the unused code
paths when CONFIG_PM_SLEEP is not selected, resulting in cleaner and
more maintainable code.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The 'enable-sdio-wakeup' device tree property was marked as legacy and
superseded by the standard 'wakeup-source' property in commit 71a0151c5c82
("Documentation: devicetree: fix reference to legacy wakeup properties")
back in 2015.
Since it has been a decade and the migration to the standard property
has long been completed, remove this obsolete legacy support.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplifies allocations by using a flexible array member in these structs.
Add __counted_by to get extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Due to errata i2493[0], multi-block write would still fail in retries.
With i2493, the MMC interface has the potential of write failures when
issuing multi-block writes operating in HS200 mode with excessive IO
supply noise.
While the errata provides guidance in hardware design and layout to
minimize the IO supply noise, in theory the write failure cannot be
resolved in hardware. The software solution to ensure the data integrity
is to add minimum 5us delay between block writes. Single-block write is
the practical way to introduce the delay.
This patch reuses recovery_mode flag, and switches to single-block
write in retry when multi-block write fails. It covers both CQE and
non-CQE cases.
[0] https://www.ti.com/lit/pdf/sprz582
Cc: stable@vger.kernel.org
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The bus width support for UHS mode is now validated in mmc_validate_host_caps().
Therefore, we can safely remove the explicit MMC_CAP_4_BIT_DATA check from
mmc_host_can_uhs(). As part of this cleanup, simplify the condition by using
the consolidated MMC_CAP_UHS flag.
Signed-off-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
UHS/DDR/HS200 modes require at least 4-bit bus support. Host controllers
that lack relevant capability registers rely on paring properties provided
by firmware, which may incorrectly set these modes. Now that mmc_validate_host_caps()
has been introduced to validate such configuration violations, let's also
add checks for UHS/DDR/HS200 modes.
This fixes an issue where, if the HS200/HS400 property is set while only
a 1-bit bus width is used, mmc_select_hs200() returns 0 without actually
performing the mode switch. Consequently, mmc_select_timing() proceeds
without falling back to mmc_select_hs(), leaving the eMMC device operating
in legacy mode (26 MHz) instead of switching to High Speed mode (52 MHz).
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
[Shawn: reword the commit msg and rework the code]
Signed-off-by: Shawn Lin <shawn.lin@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use min3() to simplify sdio_set_block_size().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Kingston eMMC IY2964 and IB2932 takes a fixed ~2 seconds for each secure
erase/trim operation regardless of size - that is, a single secure
erase/trim operation of 1MB takes the same time as 1GB. With default
calculated 3.5MB max discard size, secure erase 1GB requires ~300 separate
operations taking ~10 minutes total.
Add a card quirk, MMC_QUIRK_FIXED_SECURE_ERASE_TRIM_TIME, to set maximum
secure erase size for those devices. This allows 1GB secure erase to
complete in a single operation, reducing time from 10 minutes to just 2
seconds.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some eMMC vendors need to report manufacturing dates beyond 2025 but are
reluctant to update the EXT_CSD revision from 8 to 9. Changing the
Updating the EXT_CSD revision may involve additional testing or
qualification steps with customers. To ease this transition and avoid a
full re-qualification process, a workaround is needed. This
patch introduces a temporary quirk that re-purposes the year codes
corresponding to 2010, 2011, and 2012 to represent the years 2026, 2027,
and 2028, respectively. This solution is only valid for this three-year
period.
After 2028, vendors must update their firmware to set EXT_CSD_REV=9 to
continue reporting the correct manufacturing date in compliance with the
JEDEC standard.
The `MMC_QUIRK_BROKEN_MDT` is introduced and enabled for all Sandisk
devices to handle this behavior.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
JEDEC JESD84-B51B which was released in September 2025, increases the
manufacturing year limit for eMMC devices. The eMMC manufacturing year
is stored in a 4-bit field in the CID register. Originally, it covered
1997–2012. Later, with EXT_CSD_REV=8, it was extended up to 2025. Now,
with EXT_CSD_REV=9, the range is rolled over by another 16 years, up to
2038.
The mapping is as follows:
cid[8..11] | rev ≤ 4 | 8 ≥ rev > 4 | rev > 8
---------------------------------------------
0 | 1997 | 2013 | 2029
1 | 1998 | 2014 | 2030
2 | 1999 | 2015 | 2031
3 | 2000 | 2016 | 2032
4 | 2001 | 2017 | 2033
5 | 2002 | 2018 | 2034
6 | 2003 | 2019 | 2035
7 | 2004 | 2020 | 2036
8 | 2005 | 2021 | 2037
9 | 2006 | 2022 | 2038
10 | 2007 | 2023 |
11 | 2008 | 2024 |
12 | 2009 | 2025 |
13 | 2010 | | 2026
14 | 2011 | | 2027
15 | 2012 | | 2028
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
To prepare sdio drivers to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver that isn't converted yet to that
callback at register time.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/397f45c2818f6632151f92b70e547262f373c3b6.1768232321.git.u.kleine-koenig@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
|
