| Age | Commit message (Collapse) | Author |
|---|
|
This resolves a number of merge conflicts between the branches, and we
pick up the fixes in 7.3-rc6 that we need for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__must_hold() markings added earlier in this series are only
documentation unless the file opts in, so switch the analysis on for
dps310.o.
Clean with clang 23.1.0 and CONFIG_WARN_CONTEXT_ANALYSIS=y. It does run:
dropping the lock around dps310_fifo_drain() warns rather than going
quietly.
Assisted-by: LLM
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Add a triggered buffer to capture continuously on both channels instead
of one sysfs read at a time.
Raw register value is not useful on its own, pressure has to go through
the compensation polynomial and needs a temperature reading. Report raw
in Pa with 1/1000 scale to keep full resolution in the buffer without
changing what the existing processed attribute reports.
Raw and processed reads return -EBUSY while buffer is on, so does any
reconfiguration.
Assisted-by: LLM
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
A processed pressure read takes the lock twice: once in the raw read,
then again when dps310_calculate_pressure() trylocks to refresh the
temperature. The refresh is skipped whenever the lock is busy.
Split the raw reads into variants that expect the lock held and give each
channel a helper that takes it once for the whole sequence, so the
temperature refresh is unconditional. Buffered capture later in this
series needs the same shape.
Mark the functions that need the lock with __must_hold() rather than a
comment, and include cleanup.h, which ACQUIRE() needs and was coming in
transitively.
Assisted-by: LLM
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Pressure and temperature results are big-endian 24-bit values. Build them
with get_unaligned_be24() instead of open-coded shifts.
The coefficients are packed into the bytes rather than byte-aligned, so
they stay as they are.
Assisted-by: LLM
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
probe() spells out &client->dev for every devm call. Take it into a local
instead. Keeps lines short as more calls are added later in this series.
No functional change.
Assisted-by: LLM
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Driver defines them as BIT(4), BIT(5) and BIT(6). Per datasheet P_SHIFT
is bit 2, FIFO_EN is bit 1 and SPI_MODE is bit 0.
Only P_SHIFT has a user. dps310_set_pres_precision() sets it at
oversampling 16 or above, so with wrong bit the result register is never
shifted and stops matching the scale factor compensation divides by.
in_pressure_input returns -ERANGE at oversampling 16, 32 and 64.
FIFO_EN needed by FIFO support later in this series.
Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310")
Fixes: d711a3c7dc82 ("iio: dps310: Add pressure sensing capability")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
A device bound through driver_override need not match an entry in the
driver tables. In that case spi_get_device_match_data() returns NULL,
but bmp280_spi_probe() immediately dereferences the result.
Validate the match data before selecting the regmap bus.
Fixes: faac4dda9a91 ("iio: pressure: bmp280: Use spi_get_device_match_data()")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: LLM
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Convert deprecated SIMPLE_DEV_PM_OPS() to DEFINE_SIMPLE_DEV_PM_OPS()
and pm_sleep_ptr(). Also replace SIMPLE_DEV_PM_OPS() + EXPORT_SYMBOL_GPL()
with EXPORT_GPL_SIMPLE_DEV_PM_OPS().
This allows us to drop the __maybe_unused annotations from the resume callback.
This is a straightforward cleanup with no functional change intended.
Signed-off-by: Triet Hoang <triet.hoang.dev@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
The BM1390 tries to initialize the AVE_NUM to 110b at the start-up. The
field location is not taken into account, and value is written unsifted.
This causes the AVE_NUM to be initialized to zero.
Use FIELD_PREP() to shift the intended AVE_NUM value to correct field.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 81ca5979b6ed ("iio: pressure: Support ROHM BU1390")
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage.
Fixes: 534674463a59 ("iio: bm1390: simplify using guard(mutex)")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table.
Fixes: 10b40ffba2f9 ("iio: pressure: bmp280: Add more tunable config parameters for BMP380")
Cc: stable@vger.kernel.org
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of fixes for the 7.2 cycle.
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
* tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
When the device is enumerated through its ACPI HID (IFX3100),
i2c_client_get_device_id() returns NULL: the ACPI-derived client name
does not match the driver's i2c_device_id table. dps310_probe() then
dereferences that NULL pointer in "iio->name = id->name" and crashes the
kernel during probe.
The IIO device name is always "dps310", so set it directly and drop the
now-unused device-id lookup.
Fixes: 72ff282819d0 ("iio: pressure: dps310: Add ACPI HID table")
Cc: stable@vger.kernel.org
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
In the IIO_CHAN_INFO_RAW case every arm of the inner switch on
channel->type returns so this final return is never reached.
Found by smatch:
drivers/iio/pressure/abp2030pa.c:382 abp2_read_raw() warn: ignoring unreachable code.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Reviewed-by: Siratul Islam <siratul.islam@linux.dev>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Since commit
55b48e23f5c4 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
mpl115_probe() enables runtime PM when a shutdown GPIO is present and
then returns the result of devm_iio_device_register(). If registration
fails, runtime PM remains enabled and autosuspend remains selected.
The same unmanaged runtime PM state is also left behind on driver
unbind, as the IIO device registration is managed but the runtime PM
setup is not.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
probe failure and driver unbind, and check pm_runtime_set_active() so
setup errors are reported.
Set the autosuspend parameters before enabling runtime PM. Once probe
has completed, the driver core queues an idle request for the device, so
an explicit pm_runtime_get_noresume()/pm_runtime_put() pair is not
needed to start autosuspend.
Fixes: 0c3a333524a3 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Cc: stable@vger.kernel.org
Suggested-by: jonathan.cameron@oss.qualcomm.com
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
|
|
Adjust alignment of parentheses across HID sensor IIO drivers to
improve readability and maintain consistency with kernel coding style.
While updating the formatting, group related arguments consistently in
multi-line function signatures where appropriate.
No functional change intended.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Linux 7.2-rc2
Done to resolve conflicts with header reorg around mod_devicetable.h
and provide a base for other inflight series that touch the includes.
|
|
bm1390_trigger_handler() returns from three error paths without calling
iio_trigger_notify_done(). The success path at the end does, so on a
transient regmap or read failure the trigger's use_count is never
decremented and iio_trigger_poll_chained() drops subsequent dispatches
until the trigger is reattached.
This is not a fix for a reported bug, only hardening against hardware
or bus glitches; if a glitch is persistent the device is wedged and
needs an unbind anyway, which is left to the user.
Split the function so the inner helper returns bool with the data-read
outcome, and the outer IRQ handler calls iio_trigger_notify_done()
once and reports the result via IRQ_RETVAL().
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
device exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
spi_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The drivers explicitly set the .driver_data member of struct
spi_device_id to zero without relying on that value. Drop these unused
assignments.
While touching these arrays unify spacing and use named initializers for
.name.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
propagate error.
Signed-off-by: Yash Suthar <yashsuthar983@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced.
Fixes: 0c3a333524a3 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Prefer 'u32' instead of bare 'unsigned' for usage_id variable.
This matches expected callback API type and improves code clarity.
No functional change.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
IIO: 2nd set of fixes for the 7.1 cycle.
Usual mixed bag of ancient issues and the recently introduced.
Various drivers
- Ensure use of simple_write_to_buffer() in debugfs callbacks doesn't
result in reading off the end of intended data by checking the
position is always 0.
buffer/hw-consumer
- Ensure scan_mask is freed on buffer release.
acpi-als
- Check ACPI_COMPANION() against NULL to close corner case where a
driver is overridden.
adi,ad4062
- Add GPIOLIB dependency to avoid undefined ref to gpiochip_get_data()
adi.ad7768-1
- Add GPIOLIB dependency to avoid several undefined functions.
adi,ad2s1210
- Ensure possible recovery path if a read fails in the interrupt handler.
bosch,bmg160
- Increase sleep on startup to ensure device is ready.
bosch,bmp280
- Ensure buffer pushed to kfifo is zeroed to avoid leaking uninitialized
stack data to userspace.
dyna-image,al3010
- Fix refactor that stopped reading one of the two measurement registers.
dyna-image,al3320a
- Fix refactor that stopped reading one of the two measurement registers.
qcom,spmi-iadc
- Ensure disable_irq_wake() is called on remove path.
sensiron,scd30
- Fix a sign extension bug.
st,vl5310x
- Ensure possible recovery path if a read fails in the interrupt handler.
ti,adc1298
- Bounds check for pga_settings index. Hardening against device returning
unexpected values.
ti,tmp006
- Ensure trigger correctly released on remove path.
vishay,veml6030
- Fix incorrect channel type in events.
vishay,veml6074
- Bounds check for veml6075_it_ms. Hardening against device returning
unexpected values.
* tag 'iio-fixes-for-7.1b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
iio: light: opt3001: fix missing state reset on timeout
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
iio: core: fix uninitialized data in debugfs
iio: backend: fix uninitialized data in debugfs
iio: dac: ad3552r-hs: fix uninitialized data ni ad3552r_hs_write_data_source()
iio: adc: qcom-spmi-iadc: balance enable_irq_wake() on driver unbind
iio: light: al3320a: read both ALS ADC registers again
iio: light: al3010: read both ALS ADC registers again
iio: temperature: tmp006: use devm_iio_trigger_register
iio: buffer: hw-consumer: free scan_mask on buffer release
iio: adc: ad7768-1: Select GPIOLIB
iio: light: veml6030: fix channel type when pushing events
iio: light: acpi-als: Check ACPI_COMPANION() against NULL
iio: resolver: ad2s1210: notify trigger and clear state on fault read error
iio: proximity: vl53l0x: notify trigger and clear IRQ on error paths
iio: gyro: bmg160: wait full startup time after mode change at probe
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
iio: pressure: bmp280: zero-init bmp580 trigger handler buffer
...
|
|
Linux 7.1-rc6
|
|
Use IIO_CHAN_SOFT_TIMESTAMP() to define the timestamp channel instead of
manually filling in the struct iio_chan_spec fields. This makes the code
less verbose and mistake-prone.
Also drop obvious comment while we're at it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Replace the local press_adjust_channel_bit_mask() function with a
compound literal for scan_type initialization to improve code
readability.
Signed-off-by: Natália Salvino André <natalia.andre@ime.usp.br>
Co-developed-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
Signed-off-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Siratul Islam <email@sirat.me>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
bmp580_trigger_handler() builds an on-stack scan buffer containing
two __le32 fields and an aligned_s64 timestamp, and pushes it to
userspace via iio_push_to_buffers_with_ts(). However, only the low
3 bytes of each __le32 field are populated by the device data:
memcpy(&buffer.comp_press, &data->buf[3], 3);
memcpy(&buffer.comp_temp, &data->buf[0], 3);
The high byte of each field is left uninitialised on the stack.
The bmp580 channels declare storagebits = 32, so the IIO core
transports all four bytes per sample to userspace as part of the
scan element, leaking two bytes of kernel stack per scan.
Zero-initialise the buffer before populating it, mirroring the fix
applied to bme280_trigger_handler() in commit 018f50909e66 ("iio:
bmp280: zero-init buffer").
Fixes: 872c8014e05e ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: 872c8014e05e ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
We need the char/misc/iio/comedi fixes in here as well for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix several spelling mistakes in comments.
- opertion -> operations
- transfered -> transferred
- usng -> using
- externaly -> externally
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The i2c_transfer() function returns the number of messages
successfully transferred. The function sends 1 message but checks
for ret == 2, which can never be true.
In practice this has no impact since the caller checks ret < 0,
and the erroneous return value of 1 is not treated as an error.
Improve the return value handling to properly distinguish between
I2C errors and unexpected transfer counts.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Tested-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since commit aef30c8d569c ("genirq: Warn about using IRQF_ONESHOT
without a threaded handler"), the IRQ core checks IRQF_ONESHOT flag
in IRQ request and gives a warning if there is no threaded handler.
Remove IRQF_ONESHOT from devm_request_irq().
Fixes: 47d323ce1e89 ("iio: pressure: add Honeywell ABP2 driver")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Tested-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
The intention here was probably not allowing forced-threading for
handlers such as iio_trigger_generic_data_rdy_poll() will intends to
invoke hard-interrupt handlers.
Replace IRQF_ONESHOT with IRQF_NO_THREAD.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Do not print a duplicate error message if devm_request_irq() fails.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add copyright line to the core driver.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Implement a measurement sequence that does not involve a one byte read of
the status byte before reading the conversion.
The sensor's conversions should be read either once the EoC interrupt
has triggered or 5ms after the 0xaa command. See Options 1 and 2
respectively in Tables 16 (page 15) and 18 (page 18) of the datasheet.
Note that Honeywell's example code also covered in the datasheet follows
Option 2 for both i2c and SPI.
The datasheet does not specify any of the retry parameters that are
currently implemented in the driver. A simple 5+ms sleep as specified in
Option 2 is enough for a valid measurement sequence.
The change also gets rid of the code duplication tied to the verification
of the status byte.
This change only affects users that do not define the EoC interrupt in
the device tree.
Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf?download=false
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Make sure a valid conversion comes with a status byte that only has
the MPR_ST_POWER bit set.
Return -EBUSY if also MPR_ST_BUSY is set or -EIO otherwise.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move memset() from the bus specific code into core.
Zeroing out the buffer is performed because the sensor has noticeable
latch-up sensitivity and in some cases it clamps the MISO signal to GND
in sync with SCLK [1]. A raw conversion of zero is out of bounds since
valid values have to be between output_min and output_max (and the
smallest output_min is 2.5% of 2^24 = 419430).
The user is expected to discard out of bounds pressure values.
Given the fact that we can't follow the behaviour of all SPI controllers
when faced to this clamping of an output signal, a raw conversion of zero
is used as an early warning in case the low level SPI API reacts
unexpectedly.
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1588325/am3358-spi-tx-data-corruption [1]
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
