| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"This consists of start of work for hiding dmaengine internals and
adding new APIs for dmaengine calls. Also couple of drivers and device
and lot of updates esp AI-assisted improvements to drivers.
Core:
- Better document descriptor flags and clarify ordering rules around
cookie completion
- New APIs to start hiding dmaengine guts so that we can start making
them internal
New Support:
- Nord and Maili GPI DMAengine support
- DW axi dma updates and support for UltraRISC DP1000 controller
- Apple M3 generation ADMACs support
- Amlogic A9 SoC DMA controller driver
- Sun6i refactoring and support for Allwinner A733 DMA controller
Updates:
- Freescale device_prep_peripheral_dma_vec support and dynamic
scatter/gather chaining
- TI crossbar and cppi DT schema conversion
- zynqmp driver updates for error patch handling
- Link list handling improvements for DW edma driver
- ST dma40 improvements and corner case handling"
* tag 'dmaengine-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (149 commits)
dmaengine: amlogic: Fix regmap error check issue
dmaengine: ste_dma40: Preserve the LCPA I/O address space
docs: dmaengine: clarify ordering rules around cookie completion
dmaengine: move driver-private helpers out of include/linux/dmaengine.h
dmaengine: add dmaengine_desc_set_callback() helper
dmaengine: add dmaengine_get_provider_device() API
dmaengine: add dmaengine_get_max_xor() helper
dmaengine: add dmaengine_get_cap_mask() and dmaengine_has_cap() helpers
dmaengine: add dmaengine_get_copy_align() and related alignment getter helpers
dmaengine: add dmaengine_is_*_aligned() helpers for DMA consumers
dmaengine: add dmaengine_prep_dma_(pq|pq_val|interrupt|xor)() API
dmaengine: sh: rcar-dmac: Add support for R-Car Gen5 SoCs
dt-bindings: renesas,rcar-dmac: Add support for R-Car X5H SoC
dmaengine: sh: rcar-dmac: SMMU doesn't need IPMMU workaround
dmaengine: sh: rcar-dmac: fix style in struct initialization
dmaengine: qcom: bam_dma: free interrupt before the clock in error path
dmaengine: ppc4xx: fix typo "contoller" in comment
dmaengine: ste_dma40: Search all blocks for fixed logical channels
dt-bindings: dma: dma40: Restore disabled-channels
dmaengine: ste_dma40: Validate memcpy configuration
...
|
|
The func devm_regmap_init_mmio() only returns an error pointer on failure,
Use IS_ERR() instead to make the intent clearer. And Fix the following
compilation issue at the same time.
Smatch warnings:
drivers/dma/amlogic-dma.c:636 aml_dma_probe() warn: passing zero to 'PTR_ERR'
Fixes: b84b5197e344 ("dmaengine: amlogic: Add general DMA driver for A9")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202610080953.C5TYlCaA-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20261016-fix-a9-dma-complier-v1-1-024421d5b3c8@amlogic.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The LCPA area is mapped with devm_ioremap(), but lcpa_base and the
per-channel lcpa pointer lack __iomem annotations. This loses the I/O
address space and makes sparse warn when d40_current_addr() assigns
LCPA register addresses to its __iomem pointers.
Annotate both pointers and the LCPA argument of d40_log_lli_lcpa_write()
to preserve the I/O address space from the mapping to the register
accessors. This also fixes the existing LCPA read and write warnings
without changing the generated code.
Fixes: c80edceff29e ("dmaengine: ste_dma40: Fix cyclic transfer residue")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202610090216.pjMRxhRL-lkp@intel.com/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20261010-dma40-smatch-fix-v1-1-26ca10043957@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the following functions and declarations from the public header
include/linux/dmaengine.h into the driver-private header
drivers/dma/dmaengine.h, since they are only used by DMA engine drivers
and not by DMA engine consumers:
- dma_async_device_register()
- dmaenginem_async_device_register()
- dma_async_device_unregister()
- dma_async_device_channel_register()
- dma_async_device_channel_unregister()
- is_slave_direction()
- dmaengine_get_direction_text()
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20261001143955.2195063-1-Frank.Li@oss.nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Gen5 is very similar to Gen4. Of interest here is that it has a SMMU
instead of an IPMMU, so there is no need to set the flag for a
workaround. Make the module description more generic while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260909094009.2167-10-wsa+renesas@sang-engineering.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
R-Car Gen5 doesn't use an IPMMU anymore, but a SMMU. So, the workaround
for the IPMMU becomes optional. Add a flag to distinguish. No functional
change.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260909094009.2167-8-wsa+renesas@sang-engineering.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A new member will be added to the struct. Before that, adhere to coding
style by using a single space when assigning values.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260909094009.2167-7-wsa+renesas@sang-engineering.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The BAM interrupt is requested with a devres helper and so on error it's
freed after probe() returns. We disable the clock before freeing or
masking it so it may still fire and we may end up reading BAM registers
with clock disabled.
Stop using devres for interrupts as we free it in remove() manually
anyway. Add an appropriate label and free the interrupt before disabling
the clock in error path and in remove().
Cc: stable@vger.kernel.org
Fixes: e7c0fe2a5c84 ("dmaengine: add Qualcomm BAM dma driver")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260427-qcom-qce-cmd-descr-v16-0-945fd1cafbbc%40oss.qualcomm.com?part=2
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20261008-bam-dma-free-irq-v28-1-5e5b10de441e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The comment above XOR_ENGINES_NUM is missing an "r" in "controller".
Link: https://lore.kernel.org/all/asSzFW-ZJ16xhFnA@parshuram/
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Link: https://patch.msgid.link/20261006084702.5748-1-hemanth.selam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixed logical channel allocation scans physical channels in blocks
determined by the event-group layout. When the requested physical channel
does not belong to the first block, d40_allocate_channel() returns -EINVAL
instead of checking later blocks.
Skip nonmatching blocks so controllers with multiple physical-channel
blocks can allocate fixed logical channels from the later blocks.
Fixes: 5cd326fd27da ("dmaengine/ste_dma40: allow fixed physical channel")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225008.5F9651F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20261006-dma40-fixes-v8-1-b0aadf804793@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_config_memcpy() builds a default memcpy configuration without passing
it through d40_validate_conf(). A dev_type supplied through the
memcpy-channels device tree property can therefore bypass the bounds
checks added for client configurations.
The generic DMA direction enum assigns zero to DMA_MEM_TO_MEM, unlike
DMA40's old private enum. Allow memory-to-memory directions in the
validator so checking the generated configuration does not reject all
memcpy channels.
Validate the generated memcpy configuration before deriving logical
channel registers or allocating the channel.
Fixes: 2c2b62d5d911 ("dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225008.5F9651F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-24-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixed physical memcpy allocation uses dma_cfg.phy_channel directly as an
index into phy_res when use_fixed_channel is set. d40_validate_conf()
validates dev_type but not the fixed physical channel, allowing an invalid
configuration to access memory outside the array.
Validate the fixed physical channel centrally before accepting the channel
configuration.
Fixes: f000df8c5a0e ("dmaengine: ste_dma40: support fixed physical channel allocation")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225008.5F9651F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-23-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DMA40 physical resources are connected in pairs to event groups. The
mapping repeats after each complete set of groups.
D40_GROUP_SIZE and D40_PHYS_TO_GROUP() encode the four-group V4A layout.
On V4B, which has five groups, resources 8 and 9 are consequently offered
both to event groups 0 and 4. The GCC clock bookkeeping also treats these
resources as group 0 instead of group 4.
Derive the physical-resource stride and reverse mapping from the
variant-specific number of event groups. This preserves the V4A mapping
and gives V4B a ten-resource stride: resources 8 and 9 belong only to
group 4, while resources 10 and 11 repeat group 0.
Fixes: 3cb645dc85a0 ("dmaengine: ste_dma40: support more than 128 event lines")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-21-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dev_type validation can allow values whose derived event group has no
matching physical channel pair. d40_allocate_channel() then indexes
phy_res with j + event_group * 2, and __d40_set_prio_rt() uses the same
group to select priority and realtime registers.
The physical-mode validation also compares dev_type with the number of
physical channels. However, dev_type identifies an event line: DB8500 has
eight physical channels but 64 source and 64 destination event lines. The
event group determines which physical channel pair can serve an event, so
the physical channel count is not a valid dev_type limit.
Reject dev_type values outside the hardware event-group range, remove the
incorrect physical channel count limit, and stop the physical-channel
search before a partial final channel group can index past phy_res.
Fixes: 26955c07dcf3 ("dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225008.5F9651F000E9@smtp.kernel.org/
Assisted-by: LLM
Link: https://lore.kernel.org/dmaengine/20260819225008.5F9651F000E9@smtp.kernel.org/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-20-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_validate_conf() checks the raw dev_type against num_log_chans,
but d40_allocate_channel() derives the lookup_log_chans index as either
2 * dev_type or 2 * dev_type + 1.
Validate the dev_type against the derived logical channel index limit so
channel allocation cannot write past lookup_log_chans.
Fixes: 26955c07dcf3 ("dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-19-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Logical channel allocation uses the configured direction to select the
source or destination allocation mask, derive the logical channel number,
and choose the LCPA location.
d40_set_runtime_config_write() nevertheless overwrites the configured
direction when a transfer is prepared for the opposite direction.
d40_free_dma() then clears the wrong allocation mask, leaking the original
resource and potentially releasing one used by another client.
Reject directions that differ from the direction used during allocation
and propagate runtime configuration errors to callers. Skip slave runtime
configuration for memcpy transfers, which also use d40_prep_sg() but do
not require it.
Fixes: 95e1400fa131 ("DMAENGINE: add runtime slave config to DMA40 v3")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-18-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMA40 binding requires three cells, but d40_xlate() reads args[0],
args[1], and args[2] without checking args_count. A malformed provider node
can specify fewer cells, leaving some of these values uninitialized when
the OF DMA core invokes the translation callback.
Reject specifiers that do not contain exactly three cells before reading
the argument array.
Fixes: fa332de5c6b3 ("dmaengine: ste_dma40: Supply full Device Tree parsing support")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-17-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_of_probe() checks how many entries disabled-channels contains, but not
the channel numbers themselves. d40_phy_res_init() later uses every value
as an index into base->phy_res, whose size is the number of channels found
in this DMA40 instance. An out-of-range value can therefore write beyond
the allocation.
Validate each disabled channel against the detected hardware channel count
before allocating and initializing the channel resources.
Fixes: 499c2bc3cc89 ("dmaengine: ste_dma40: Fetch disabled channels from DT")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-16-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_of_probe() validates the memcpy-channels property against
D40_MEMCPY_MAX_CHANS, but reads the property directly into a smaller global
array. A long property can therefore overwrite adjacent data. The mutable
global also lets a later DMA40 instance replace the memcpy channel mapping
used for future allocations on an earlier instance.
Store the mapping in the per-device platform data, validate the property
against that storage, and check the property read result. The property is
required and d40_probe() always populates the platform data, so remove the
obsolete global mapping and fallback.
Fixes: a7dacb68b35a ("dmaengine: ste_dma40: Allow memcpy channels to be configured from DT")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225215.5EA2F1F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-15-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
of_parse_phandle() takes a reference to the LCPA SRAM node, but d40_probe()
does not release it after translating the node into a resource. This leaks
the node reference for the lifetime of the system.
Put the node immediately after of_address_to_resource() so both the success
and error paths release the reference.
Fixes: 5a1a3b9c19dd ("dmaengine: ste_dma40: Get LCPA SRAM from SRAM node")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-14-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When LCLA is placed in ESRAM, d40_probe() stores a devm_ioremap()
address in lcla_pool.base and leaves base_unaligned unset. The
destroy_cache error path can then pass the ioremap address to
free_pages().
Only free lcla_pool.base with free_pages() when the driver allocated the
LCLA pool from normal memory. The ESRAM mapping is devm-managed.
Fixes: 339f5041089a ("dmaengine: ste_dma40: Use managed resources")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225114.AE1511F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-13-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_lcla_allocate() calculates the number of pages needed for LCLA, but
passes that raw page count as the allocation order to __get_free_pages().
The same value is later passed to free_pages().
Store the allocation order with get_order() instead, and use a separate
byte size for allocation diagnostics, fallback kmalloc() sizing and DMA
mapping.
Fixes: 508849ade23c ("DMAENGINE: ste_dma40: allocate LCLA dynamically")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225114.AE1511F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-12-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_dmaengine_init() registers DMAengine devices using devres-managed
unregister actions. If probe fails after one of those registrations, the
DMAengine devices stay visible until devres unwinds after d40_probe()
returns.
The channel tasklets are also initialized before each DMAengine device is
registered. An interrupt can therefore have queued a tasklet by the time a
later registration step fails, but unregistering the DMAengine devices
does not drain that tasklet before probe-owned storage is released.
Add tasklet cleanup actions to the DMAengine registration devres group.
Install each action before publishing its DMAengine device. If action
registration fails, those tasklets have never been exposed and cannot have
been scheduled, so use devm_add_action() without immediate reset cleanup.
On later failure, free the IRQ before releasing the group so no new
tasklets can be scheduled, then unregister the DMAengine devices and drain
their tasklets before freeing the remaining probe resources. Keep the
managed registrations and cleanup actions in place on successful probe by
removing only the temporary group markers.
Fixes: 42ae6f1695be ("dmaengine: ste_dma40: Remove platform data")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225215.5EA2F1F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-11-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_probe() registers the hardware interrupt before several later probe
steps that can fail. Those error paths jump to destroy_cache without
freeing the IRQ, leaving the handler registered after probe resources have
been released.
Route failures after a successful IRQ request through a dedicated cleanup
label. Keep the request before DMAengine registration because that
registration publishes channels to clients.
Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-10-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_probe() enables the interrupt handler and registers DMAengine devices
before calling d40_hw_init(). An interrupt pending from the bootloader can
therefore reach the handler while the hardware interrupt state is not
initialized and channel lookup entries are empty. The handler deliberately
does not acknowledge an interrupt for an unknown channel, so a level IRQ
can retrigger continuously.
Initialize the hardware and set the DMA segment limit before requesting
the IRQ or registering DMAengine devices. d40_hw_init() clears pending
logical and physical interrupt status, so request_irq() can enable the
line normally after the hardware state is initialized.
This ensures that the handler and clients only observe initialized
hardware.
Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225215.5EA2F1F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-9-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_handle_interrupt() returns IRQ_HANDLED even when no terminal-count or
error status bit is pending.
IRQ_NONE is not only used to identify a device on a shared interrupt.
The generic IRQ core also counts it as unhandled for spurious IRQ
detection. DMA40 does not request this IRQ with IRQF_SHARED, so interrupt
sharing is not the purpose of this change.
If the line remains asserted without matching DMA40 status, returning
IRQ_HANDLED hides the stuck interrupt and can leave the CPU servicing it
indefinitely. Track whether any DMA40 status is pending and return IRQ_NONE
when none is present, allowing the generic IRQ core to diagnose and
eventually disable the faulty line.
DMA40 channels can be owned by other SoC cores. Their status means that
the interrupt is real, but Linux must not acknowledge it. Treat foreign
status as handled and leave its acknowledgment to the owning core, while
acknowledging and dispatching only registered Linux channels.
Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-8-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Several channel operations use pm_runtime_get_sync() and access DMA40
registers without checking whether runtime resume succeeded. If resume
fails, the registers may be inaccessible. pm_runtime_get_sync() also
increments the usage counter on failure, making error unwinding easy to
unbalance.
Use pm_runtime_resume_and_get() and avoid register access when resume
fails. Acquire the runtime PM reference before allocating a channel so
failure needs no channel-allocation rollback.
If a queued transfer cannot be started because resume failed, retire all
issued descriptors through the normal tasklet path. Since
dma_async_issue_pending() cannot return an error, leaving them queued would
make clients wait indefinitely for callbacks.
Termination and channel release must also clean up software state when the
controller cannot resume. d40_term_all() only releases descriptor state and
does not access DMA40 registers, so it remains unconditional.
Balance each transient runtime PM reference in its successful acquisition
block, without bookkeeping flags. Release the outstanding busy reference
and channel allocation state when freeing a channel. Skip only the hardware
stop that requires register access.
Fixes: 7fb3e75e1833 ("dmaengine/ste_dma40: support pm in dma40")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-7-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_handle_interrupt() reads DMA40 interrupt registers unconditionally. A
spurious interrupt can arrive while the device is runtime suspended, after
dma40_runtime_suspend() has disabled the GCC clock.
Avoid touching the registers unless the device is runtime active by taking
a conditional runtime PM reference. Return IRQ_NONE when the device is
suspended, and drop the reference after handling an active interrupt.
When CONFIG_PM is disabled, pm_runtime_get_if_active() returns -EINVAL even
though the registers remain accessible. Keep handling interrupts in that
configuration and only drop the runtime PM reference when one was acquired.
Fixes: 7fb3e75e1833 ("dmaengine/ste_dma40: support pm in dma40")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225114.AE1511F000E9@smtp.kernel.org/
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-6-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some d40_probe() error paths jump to destroy_cache before runtime PM has
been enabled for the DMA controller device. The label unconditionally calls
pm_runtime_disable(), which increments disable_depth even though this probe
attempt never enabled runtime PM.
Use devm_pm_runtime_set_active_enabled() to mark the controller active,
enable runtime PM and register balanced cleanup for probe failure. This
avoids both the disable-depth imbalance and ad-hoc probe state tracking.
The interrupt handler uses pm_runtime_get_if_active() and cannot
acknowledge a pending interrupt while runtime PM is disabled. Request the
IRQ only after enabling runtime PM so the handler cannot enter an
unacknowledged interrupt loop during probe.
Fixes: 0618c077a8c2 ("dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-5-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If d40_start() fails after a queued descriptor has been moved to the
active list, d40_queue_start() currently returns NULL without unwinding
the transfer state or clearing the channel busy flag.
Fix this pre-existing error path by completing the descriptor through the
normal tasklet path, clearing the busy flag, balancing the runtime PM
reference and returning an error pointer to distinguish the failure from
the no-work case. Do not free the descriptor directly, since it has
already been submitted and has a DMA cookie.
When starting the next queued transfer from the completion handler, put
the completed descriptor on the done list first. This preserves FIFO
completion order if the new transfer fails to start and prevents the
completed cookie from moving backwards.
Use done-list membership rather than the cyclic flag to identify terminal
descriptors in the tasklet. A cyclic descriptor that failed to start is
then completed and removed instead of remaining permanently at the head
of the done list.
Fixes: 7d83a854a1a4 ("dma40: remove "hardware link with previous jobs" code")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Assisted-by: LLM
Link: https://lore.kernel.org/dmaengine/20260618051539.15E201F000E9@smtp.kernel.org/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-4-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DMA40 has one terminal-count status bit per channel, so cyclic period
interrupts can coalesce.
Use the memory-side pointer displacement to queue the minimum observable
number of callbacks. If sampling fails, queue one callback and invalidate
the saved position; the next successful sample resynchronizes without
recounting it.
The pointer is modulo the cyclic buffer: a displacement of d periods can
mean d plus n complete iterations of the buffer. Report d, so the driver
could have missed n iterations of the buffer; DMA40 has no counter to
recover them. For an unchanged pointer, report one callback rather than
risk a spurious full-buffer burst.
This condition has not been seen in practice and is only a product of
review comments that the buffer can miss interrupts.
The preceding cyclic-residue fix ensures that every cyclic period fits in
one LLI, so each boundary corresponds to one client callback.
Fixes: 0c842b551063 ("dma40: cyclic xfer support")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-3-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DMA40 reads residue from the element count of the currently active LLI.
For a cyclic transfer this reports at most one period, not the bytes
remaining until the cyclic buffer wraps.
Once DMA40 advertises burst granularity, DMAengine PCM uses this residue
directly. For a four-period PCM buffer it consequently reports the
hardware pointer near three periods after every period interrupt. ALSA
eventually stops playback with -EIO although DMA period callbacks
continue.
Calculate cyclic residue from the current memory-side hardware pointer
instead. Read the destination pointer for capture and the source pointer
for playback. Sample the split logical channel pointer coherently and
retain the last valid residue during relink transitions.
Make at most three residue sampling attempts: one initial read plus two
retries. The retries let transient split-register updates or LLI relink
windows settle, while the limit prevents unbounded polling if hardware does
not yield a valid pointer.
This avoids counting terminal-count interrupts, which races with hardware
advancing to the next LLI and cannot account for coalesced interrupt
status. Also reject cyclic periods that expand into multiple LLIs because
logical cyclic LLIs each request a terminal-count interrupt and would
generate more than one callback per period.
Reject invalid cyclic geometries before dividing or constructing the
scatterlist as well.
Reported-by: Frank Li <Frank.li@oss.nxp.com>
Closes: https://lore.kernel.org/dmaengine/aq2wIPJW6viUxyy9@SMW015318/
Fixes: 15c606686541 ("dmaengine: ste_dma40: indicate granularity on channels")
Assisted-by: LLM
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-2-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
d40_dmaengine_init() configures dma_both for physical channels that can
handle both slave and memcpy transfers. Physical DMA40 channel setup has
supported cyclic LLIs since cyclic transfer support was added, but the
DMA_CYCLIC capability is set on dma_slave a second time instead of
dma_both.
Set DMA_CYCLIC on dma_both so d40_ops_init() installs
device_prep_dma_cyclic and physical channels advertise cyclic support.
Fixes: 0c842b551063 ("dma40: cyclic xfer support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260927-dma40-fixes-v7-1-89f595e8851d@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
lmdesc->nxla is the address of the next descriptor, so comparing it
against CRLA, which is the address of the current descriptor,
finds the descriptor before the active one, not the active one.
The residue loops below then summed one lmdesc too many on top of
that.
Compare each descriptor's own address to CRLA instead, and add tb
after advancing to the next lmdesc.
Fixes: 21323b118c16 ("dmaengine: sh: rz-dmac: Add device_tx_status() callback")
Fixes: 172bfb57481c ("dmaengine: sh: rz-dmac: Add cyclic DMA support")
Cc: stable@vger.kernel.org
Suggested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260922092037.224884-1-claudiu.beznea@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Allow the BestComm DMA engine to be selected for PowerPC
compile-test builds.
The freescale ethernet and sound drivers now need a dependency on
PPC_MPC52xx as they use headers/functions from that platform.
Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260918175950.21657-1-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use a designated initializer for the acpi_device_id fields which makes the
code more readable and consistent with how lists are initialized in the
rest of the kernel code base. Also drop explicitly setting fields to 0
where it is redundant.
Unify the list terminator to have a single space between the brackets and
no trailing comma.
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260916-acpi-dma-v3-4-0dac05654967@thegoodpenguin.co.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use a named initializer for the acpi_device_id fields which makes the code
more readable and consistent with how lists are initialized in the rest of
the kernel code base.
Unify the list terminator to have a single space between the brackets and
no trailing comma.
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260916-acpi-dma-v3-3-0dac05654967@thegoodpenguin.co.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use a named initializer for the acpi_device_id fields which makes the code
more readable and consistent with how lists are initialized in the rest of
the kernel code base.
Unify the list terminator to have a single space between the brackets and
no trailing comma.
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260916-acpi-dma-v3-2-0dac05654967@thegoodpenguin.co.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use a named initializer for the acpi_device_id fields which makes the code
more readable and consistent with how lists are initialized in the rest of
the kernel code base.
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260916-acpi-dma-v3-1-0dac05654967@thegoodpenguin.co.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Implement dynamic linking of scatter/gather transfers to enable
chaining multiple DMA descriptors without stopping the channel.
This avoids waiting for the channel to go idle if there is another
transaction already issued.
Add fsl_edma_link_sg() to dynamically link the last TCD of a previously
issued descriptor to the first TCD of a new descriptor by setting the
scatter/gather address and the E_SG flag, and keeping the channel active
by clearing the DREQ bit.
Also in fsl_edma_link_sg(), assign a non-zero identifier to the new
descriptor that is stored in the EDMA_TCD_CSR_LINKCH field of the CSR
of each TCD, after checking that the descriptors are not using channel
linking. The use of this field (MAJORLINKCH in the datasheet) as an
identifier for dynamic scatter/gather is suggested in the i.MX93 datasheet.
When the last issued descriptor is the one currently active on the
channel and has a single TCD, the scatter/gather address and CSR are
also written directly to the hardware registers to ensure the link
takes effect immediately, unless the DMA controller requires the DONE
bit to be cleared for the CSR change to take effect. Clearing the DONE
bit would disrupt the interrupt handler.
Linking is done in fsl_edma_issue_pending(), which iterates over the
submitted descriptors, links each one to the previously issued
descriptor via fsl_edma_link_sg(), and then moves it to the issued
list. This ensures that transactions are linked in the order they were
issued. Linking of a descriptor is limited to 31 outstanding descriptors
on the issued list so the identifier fits in the LINKCH field of the CSR
register. The value of zero is left to identify non-linked descriptors.
Update fsl_edma_xfer_desc() to avoid re-initializing the hardware when a
transfer is already in progress, allowing seamless chaining of descriptors.
Modify the transfer completion handler to check the DONE flag in the
channel CSR before marking the transfer complete. Since this flag is only
available on SoC with the split registers layout, only link transactions
for DMA controllers flagged with newly added FSL_EDMA_DRV_CSR_LINKCH. This
flag is set for eDMA3 and EDMA4 controllers which are able to perform
dynamic scatter/gather linking.
The completion handler also reaps issued descriptors whose link channel ID
(EDMA_TCD_CSR_LINKCH) has already been passed by the hardware, marking
them as completed even if their corresponding interrupt has been missed.
Add trace event for scatter/gather linking operations.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://patch.msgid.link/20260916-fsl-edma-dyn-sg-v11-2-02792de71b92@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add implementation of .device_prep_peripheral_dma_vec() callback to setup
a scatter/gather DMA transfer from an array of dma_vec structures. Setup
a cyclic transfer if the DMA_PREP_REPEAT flag is set.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://patch.msgid.link/20260916-fsl-edma-dyn-sg-v11-1-02792de71b92@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
get_cached_msi_msg() returns the base message shared by a multi-MSI
descriptor. dw-edma currently derives per-channel data from its local IRQ
index and does not adjust a common IRQ at all. Both assume eDMA starts at
the descriptor's first vector.
That is not true when eDMA receives a tail subset. Compose each message
from the IRQ offset relative to the descriptor base in both paths.
While at it, avoid reading PCI MSI attributes from descriptors owned by
non-PCI devices.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260912174023.1227397-4-den@valinux.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
An endpoint function can reserve an endpoint-local channel while the RC
programs it through an exposed register window. Such a channel must route
interrupts remotely and ignore them on the endpoint.
Use dma_slave_config to set per-channel interrupt routing on idle channels
of a local eDMA or HDMA instance. Releasing a remote-routed channel
quiesces the hardware and drains its local IRQ before restoring default
routing.
The eDMA quiesce may stop a complete direction. The caller must own every
channel in that direction and stop remote programming first.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260912174023.1227397-3-den@valinux.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dmaengine core assigns channel IDs in registration order. If a driver
skips a hardware channel, chan_id can differ from the hardware numbering
and a client cannot reliably correlate a requested channel with hardware
resources.
Let a driver request an exact channel ID before device registration.
Reserve static IDs through the existing IDA so they remain unique, while
retaining automatic IDA allocation as the default.
For example, idma32 uses chan_id to select DMA_CTL_CH() and
DMA_XBAR_SEL(), so it relies on ascending registration order to match
chan_id with the hardware channel number.
Use direction-flattened IDs for dw-edma channels. Unlike the
direction-local hardware channel number, these IDs are unique within the
DMA device.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://lore.kernel.org/r/lm7tadnxsyrypu4mypptlkx5qkytex4qxsijdr5ydud2n3anvf@yakjfjg5ng4u/
Link: https://lore.kernel.org/r/20260813063757.3131865-2-den@valinux.co.jp/
Link: https://lore.kernel.org/r/an4TXwT37vWYEzCn@SMW015318/
Link: https://patch.msgid.link/20260912174023.1227397-2-den@valinux.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Several dev_err, dev_dbg, pr_debug, and printk calls use %d or %u
format specifiers for size_t arguments (len, pool_size). Fix them
to use %zu to avoid warnings on 64-bit builds.
Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260911220308.176962-1-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
loongson2_cmc_dma_prep_slave_sg() allocates the descriptor with
kzalloc_flex() before iterating over the scatterlist. If
loongson2_cmc_dma_set_xfer_param() fails inside the loop, the function
returns ERR_PTR(ret) without freeing the descriptor. At this point the
descriptor has not been handed to vchan_tx_prep() yet, so nothing else
will ever free it, leaking it on every failed ->device_prep_slave_sg()
call (e.g. an unsupported transfer direction or bus width).
The neighbouring error path for the num_items check already frees the
descriptor before returning; do the same on the set_xfer_param() failure
path.
Fixes: 1c0028e725f1 ("dmaengine: loongson: New driver for the Loongson Multi-Channel DMA controller")
Link: https://lore.kernel.org/all/20260818094957.7D2221F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Diego Fernando Mancera Gomez <diegomancera.dev@gmail.com>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012bUV3WshMSfTq61n1cgh1i
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260905062833.272484-1-diegomancera.dev@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Amlogic A9 SoCs include a general-purpose DMA controller that can be used
by multiple peripherals, such as I2C PIO and I3C. Each peripheral group
is associated with a dedicated DMA channel in hardware.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260903-amlogic-dma-v12-2-f769bc344056@amlogic.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
plx_dma_create() registered the interrupt handler with request_irq()
before initializing plxdev->bar. If the device raised an interrupt in
that window, plx_dma_isr() would dereference the still-NULL bar.
Move the bar assignment ahead of request_irq() so everything the
handler can touch is initialized before it can run.
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Link: https://lore.kernel.org/all/20260610112121.676561-1-jjy600901@snu.ac.kr
Fixes: c2dbcaa8c672 ("dmaengine: plx-dma: Implement hardware initialization and cleanup")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/all/20260610112121.676561-1-jjy600901@snu.ac.kr/T/#u
Link: https://patch.msgid.link/20260902062153.31048-11-logang@deltatee.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the sprintf() calls in the per-channel sysfs attribute show()
functions to sysfs_emit().
Acked-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20260902062153.31048-10-logang@deltatee.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ioat3_dma_probe() disabled PCIe relaxed ordering after calling
dma_async_device_register(), so if an error occurs and the code jumps
to err_disable_interrupts, the function returns with the device still
registered in the core's dma_device_list while the caller frees the
ioatdma_device struct, leaving a dangling registration that anything
walking the device list can dereference after it's been freed.
Move the capability read/write ahead of dma_async_device_register()
instead. Nothing after registration depends on relaxed ordering
already being disabled, and nothing before it depends on the device
being registered, so this is a plain reordering. It also means every
remaining step after registration can't fail, so there's no need to
ever have to unregister the device once registered.
Fixes: 511deae0261c ("dmaengine: ioatdma: disable relaxed ordering for ioatdma")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/dmaengine/20260707165906.249F41F000E9@smtp.kernel.org
Acked-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/dmaengine/20260707165906.249F41F000E9@smtp.kernel.org/T/#u
Link: https://patch.msgid.link/20260902062153.31048-9-logang@deltatee.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
