| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: improve khugepaged coverage" (Kiryl Shutsemau):
Give khugepaged a proper workout. Extend the tests to all supported
mTHP orders, check exactly which windows collapsed, and make scan
completion deterministic. Race collapse against faults, pinning, fork
and remap; verify that the contents survive.
Add coverage for whole-page-table zaps and memory pressure too.
- "selftests/mm: separate GUP microbenchmarking from functional testing"
(Sarthak Sharma):
Untangle GUP benchmarking from correctness testing. Move the
benchmark into tools/mm, add a standalone harness-based GUP selftest,
and move shared helpers into tools/lib/mm. Give each tool one job
instead of mixing timing measurements with correctness checks.
Cover the mapping, pinning and batch-size combinations explicitly.
- "mm: Switch device DAX to section-based vmemmap optimization" (Muchun
Song):
Apply section-based vmemmap optimization to device DAX. Rework the
backing metadata layout to save memory while preserving the handling
of device memory hotplug and its different alignment and lifetime
requirements.
- "mm: Introduce section-based vmemmap optimization for HugeTLB"
(Muchun Song):
Cut the memory consumed by HugeTLB's struct page array with
section-based vmemmap optimization. Arrange the metadata so large
huge pages need fewer backing pages, while keeping initialization,
teardown and the various hugepage configurations straight.
- "mm/huge_memory: clean up and decouple the anon and file split
helpers" (Kairui Song):
Separate anonymous and file-backed folio splitting, which have rather
different locking and bookkeeping requirements. Move the work into
separate helpers, drop dead checks and tidy swap-cache handling. Fix
error paths, including one that could leave a folio frozen.
Keep the swap cache cases separate from file-cache splitting.
- "mm: Unconditional per-VMA locks and cleanups" (Dave Hansen):
Make per-VMA locking unconditional and clean up the old conditional
code around it. This removes configuration-dependent plumbing and
lets callers depend on one locking model rather than carrying both
cases along.
- "memcg: remove the v1 soft limit" (Shakeel Butt):
Remove the old cgroup v1 memory soft-limit machinery. This has long
since been superseded by the newer memory-control interfaces; hauling
around a separate reclaim scheme for it no longer buys us much.
- "read proc/pid/smaps_rollup under per-vma lock" (Suren Baghdasaryan):
Read /proc/PID/smaps_rollup using per-VMA locks where possible,
rather than holding mmap_lock across the entire walk. Retain the
contention fallback and add tearing tests. This considerably reduces
latency when another thread is busy changing its mappings.
- "mm/damon: introduce data access-as-a-data attribute" (SJ Park):
Teach DAMON to expose memory access observations as data attributes,
making them available to the probe and filtering machinery. Extend
the interfaces, documentation and tests so the new information can be
used rather than merely collected.
- "Remove PG_private by using page/folio->private checks instead" (Zi
Yan):
Get rid of PG_private and use the folio's private pointer to say
whether private data is attached. Convert the filesystem users,
including erofs, f2fs and md, and clean up the old accessors and
flags. There are a few special cases, notably swapcache and hugetlb,
which need explicit care.
- "mm: make userland page table freeing RCU-safe" (Lorenzo Stoakes):
Make freeing userspace page tables safe against RCU readers. Sort out
the page-table lifetime and locking rules so walkers cannot stumble
over freed tables while mappings are being torn down.
- "make unused huge shrinker memcg aware" (Qi Zheng):
Make shmem's unused-huge-folio shrinker aware of memory cgroups, so
reclaim can find those folios under the right memcg. Wire up the
per-memcg tracking and its lifetime rules, and give the shrinklist
its own lockdep class to avoid spurious dependency reports.
- "mm: Drop pxd_ERROR()" (Anshuman Khandual):
Remove the old pxd_ERROR() page-table checks and their
architecture-specific baggage. Simplify the common page-table
interfaces and callers now that these checks no longer serve a
useful purpose.
- "memcg: group struct fields by access pattern" (Shakeel Butt):
Rearrange memcg's hot and cold fields according to how they're
actually accessed. Keep frequently updated counters and their
neighboring state from fighting over cachelines and reduce needless
cacheline traffic.
- "mm/damon/core: fix the size charged for a filter-trimmed region"
(Donggeun Yoo):
Fix DAMOS quota accounting when a filter trims a monitoring region.
Charge only the part left after filtering, not the original region,
and add KUnit coverage. Previously the excluded memory could eat into
the quota and make schemes run more slowly than requested.
- "mm/damon: add kunit and selftests for probes and probe weights" (SJ
Park):
Add more tests for DAMON probes and their weights, including
validation and the results reported to userspace. This is mostly
about catching regressions in the newer probe infrastructure before
they become harder to diagnose.
- "mm: memcontrol: constify the read side of the read side of the memcg
API" (Tal Zussman):
Mark the read-only parts of the memcg interface const, from folio and
lruvec accessors to counters and swap helpers. Most of this is
mechanical, but it makes the contracts clearer and lets the compiler
catch accidental writes.
- "mm/damon/vaddr: support {prep,apply}_probes" (SJ Park):
Support the new prepare/apply probe operations in DAMON's
virtual-address backend. This brings vaddr monitoring into line with
the probe infrastructure and makes the added probe types useful there
too.
- "mm/mglru: clean up folio counters and flag usage" (Kairui Song):
Simplify MGLRU's folio counters and flag handling. Remove redundant
accounting paths and make the state transitions easier to follow
without changing the intended reclaim policy.
- "arch, mm/execmem: resolve confusion about set_direct_map_valid_noflush()"
(Mike Rapoport (Microsoft)):
Clarify and straighten out the set_direct_map_valid_noflush()
interface across architectures and execmem. Make the requested
mapping changes and the callers' expectations agree, rather than
relying on subtly different architecture behavior.
- "mm: zswap: free cold writeback folios promptly" (Alexandre Ghiti):
Free zswap writeback folios as soon as their disk write completes.
They are cold temporary buffers, so putting them on the LRU only
makes reclaim rediscover them later. Extend swap-cache dropbehind and
let zswap keep these folios off the LRU altogether.
- "mm: gup: cleanup gup_fast call chain" (Aristeu Rozanski):
Clean up the GUP-fast call chain and simplify how the fast-path
helpers pass their arguments and results around. Keep the page-pin
behavior the same while making the call sequence easier to maintain.
- "mm: optimize zone-device memmap initialization" (Li Zhe):
Speed up initialization of zone-device struct pages. Avoid redundant
work when setting up large device-memory ranges, where touching every
descriptor can get expensive.
- "mm/zswap: shrink zswap_entry via a pool id" (Jianyue Wu):
Reduce the size of zswap_entry by storing a compact pool identifier
instead of a full pointer. Keep the pool lookup and lifetime handling
correct while saving per-entry metadata.
- "mm/damon: support access monitoring of hugetlb-backed memory"
(Krishna Iyer):
Let DAMON monitor hugetlb-backed memory too. Extend the relevant
access checks and add coverage so those mappings no longer fall
through a hole in the monitoring machinery.
- "mm/execmem: fixes and cleanups for the ROX cache" (Mike Rapoport):
Tidy execmem's read-only-executable cache and fix its handling of the
awkward allocation and release cases. The aim is to make the cache's
ownership and permission transitions more predictable.
- "zsmallc: remove old object read API" (Sergey Senozhatsky):
Drop zsmalloc's old object-read API and move its remaining users to
the supported access mechanism. This removes a duplicate interface
which we no longer need.
- "mm/mempolicy: stop copying state in the interleave paths" (Gregory
Price):
Stop copying mempolicy state in the interleave paths when a reference
to the existing policy will do. This avoids extra work and makes the
ownership rules less obscure.
- "mm/mglru: speed up inc_min_seq() and fix cold/hot inversions" (Barry
Song):
Make MGLRU's generation advancement cheaper and fix cases where cold
and hot folios end up in the wrong order. Adjust the counter and list
handling so reclaim doesn't keep passing over the better eviction
candidates.
- "mm: Fix MF_DELAYED handling on memory failure" (Lisa Wang):
Treat MF_DELAYED as a partially completed memory-failure operation,
not an outright failure. Propagate that result correctly through
shmem and the generic handler, fix the extra-reference accounting,
and add tests for the resulting SIGBUS behavior.
- "tools/mm/page_owner_sort: fix --sort, add module filter, improve
usage" (Ye Liu):
Fix page_owner_sort's --sort handling, add module-based filtering and
make the usage output more helpful. This makes the tool less
frustrating when tracking down who is holding on to pages.
- "mm/damon: move damos filter range arguments validation to core" (SJ
Park):
Move DAMOS filter range validation into the core, where all callers
can share it. Also close the sysfs read-twice races which could pass
inconsistent ranges, and add tests for invalid input.
- "mm/damon: misc cleanups" (Zenghui Yu):
Clean up a collection of small DAMON rough edges in the core,
interfaces and tests. No large behavior change here, just simpler
code and fewer opportunities for confusion.
- "mm/damon: cleanup code, add test cases, and update guidances in
docs" (SJ Park):
Clean up DAMON's core and interfaces, add missing test cases and
bring the documentation into line with the code. These changes should
make the newer facilities easier to understand and maintain.
- "mm/damon: introduce hugepage_size probe filter" (SJ Park):
Add a DAMON probe filter for hugepage size. Let users select a range
of folio sizes through sysfs, validate the range and document the new
interface, so monitoring can concentrate on memory backed by the
desired hugepage sizes.
- "selftests/mm: pagemap_ioctl test fixes and cleanups" (Zenghui Yu):
Fix some pagemap ioctl test assumptions and clean up their setup and
reporting. Make failures point to the operation that went wrong
rather than to test harness bookkeeping.
- "mm: avoid large folio splits when swap is unavailable" (Johannes
Weiner):
Avoid splitting large folios merely to attempt swap when no swap
space is available. There is little point paying for an expensive
split when reclaim cannot actually swap the resulting pages out.
- "mm: workingset: fix the shadow node budget under MGLRU" (Hui Zhu):
Fix the workingset shadow-node budget with MGLRU enabled. Keep the
shadow entries within the intended limits so refault tracking does
not quietly consume more metadata than it should.
- "selftests/mm: TAP output and global-state fixes" (Song Hu):
Fix selftests which produce misleading TAP output or fail to restore
global settings after a run. A test ought to leave the system as it
found it, particularly when a whole suite follows behind.
- "mm: remove page_swap_entry()" (Tal Zussman):
Remove page_swap_entry() and convert its remaining users to the folio
and swap-entry helpers. Lose an old page-level interface and make the
swap paths a little more consistent.
- "mm: refactor zonelist constructors and iterators" (Gregory Price):
Refactor the zonelist construction and walk helpers to reduce
duplicated logic. Keep the allocation ordering rules intact while
making it clearer how zones are selected.
- "mm: kmemleak: batch the struct page scan" (Breno Leitao):
Scan adjacent struct pages in batches instead of taking kmemleak_lock
once for every single page. This preserves scan coverage and the
lock-hold bound, while cutting overhead substantially on debug
kernels.
- "mm/damon: misc improvements in tests and documents" (Zenghui Yu):
Fix some DAMON selftests which leave kdamond running or fail under
Python safe-path mode, and improve the KUnit coverage and
documentation. Nothing especially glamorous, but these are worth
doing.
- "mm/damon: introduce probe_hits_wsum DAMOS core filter" (SJ Park):
Add a DAMOS core filter using weighted probe-hit counts. This gives
schemes another way to select regions based on what the monitoring
probes observed.
- "mm/mglru: fix ineffective memory protection for non-kswapd reclaim"
(Ridong Chen):
Fix MGLRU's memory protection handling for reclaim outside kswapd.
The protection settings weren't having the intended effect in these
paths, leaving protected memory more exposed than requested.
- "mm/damon: improve readability, clarity and test coverage" (SJ Park):
Simplify a handful of DAMON core helpers, clarify their behavior and
expand test coverage. There are no intended userspace-visible changes
in this batch.
- "mm: replace PF_KCOMPACTD/PF_KSWAPD with kthread_func()" (Kefeng
Wang):
Stop identifying reclaim and compaction workers through the PF_KSWAPD
and PF_KCOMPACTD task flags. Use their kthread functions instead and
remove the redundant flag plumbing.
- "mm/hugetlb: fix surplus accounting and availability checks during
demotion" (Longlong Xia):
Fix HugeTLB surplus accounting and availability checks when demoting
huge pages. Keep the counters and reservation decisions consistent as
one huge page turns into several smaller ones.
- "mm/damon: add kunit tests for probe_hits handling and probe params
validation" (Jason Angelov):
Add KUnit tests for DAMON probe-hit handling and invalid probe
parameters. These cover edge cases that were too easy to miss in
ordinary monitoring tests.
- "mm/damon: fix misc bugs in kunit, quota goals and sysfs refresh_ms"
(SJ Park):
Fix a few DAMON bugs in KUnit tests, quota-goal handling and the
sysfs refresh interval. Small fixes, but the incorrect results and
control behavior were real.
- "mm: zswap: optimize zswap invalidate and store" (Kefeng Wang):
Simplify zswap's invalidate and store paths to avoid avoidable
lookups and work. Keep the entry lifetime rules intact while making
those frequent operations cheaper.
- "mm: replace custom ratelimiting logic" (Pedro Falcato):
Replace hand-rolled MM rate limiting with the common kernel helpers.
There is no need to maintain another local version of the same
mechanism.
- "mm/vmalloc: minor cleanups" (Ye Liu):
Tidy some vmalloc initialization and reporting code, and pull
duplicated vmap-area insertion work into a helper. No functional
changes are intended.
- "mm/mglru: clean up isolate_folios for readability and clarity"
(Ridong Chen):
Clean up MGLRU's isolate_folios() so the decisions are easier to read
and verify. Keep reclaim behavior unchanged while removing
unnecessary twists in the control flow.
- "Catch automatic storage in IDA and Maple Tree definitions" (Yury
Norov):
Catch IDA and maple-tree definitions placed in automatic storage
where the lifetime rules are wrong or easy to get wrong. Add checks
so such mistakes are harder to slip through unnoticed.
- "mm, swap: some random fixes and cleanups" (Kemeng Shi):
Fix and simplify a few unrelated swap paths, removing redundant work
and tidying up error handling. A small collection of things which
were better fixed than left lying around.
- "mm/page_io: folio conversion cleanups" (Tal Zussman):
Finish some page-to-folio conversions in swap I/O, removing obsolete
wrappers and using folio operations consistently. The I/O behavior is
intended to remain the same.
- "mm/swap: skip empty clusters in the swapoff scan" (Youngjun Park):
Skip empty swap clusters during swapoff instead of walking slots
which have nothing to release. This avoids pointless work on sparsely
used swap devices.
- "mm: trace: decode architecture-specific VMA flags" (Meijing Zhao):
Teach the VMA trace output to decode architecture-specific flags,
rather than leaving them as unexplained bits. That should make
tracing a good deal more useful when debugging unusual mappings.
- "mm, swap: don't spin on a bad swap entry" (Breno Leitao):
Stop repeatedly retrying a swap entry which is already known to be
bad. Make the error path terminate cleanly instead of wasting CPU
chasing an entry that cannot be used.
- "mm/page_isolation: fix UBSAN shift-out-of-bounds in
isolate_single_pageblock" (Qi Xi):
Fix an out-of-range shift in isolate_single_pageblock() and tighten
its associated boundary handling. UBSAN found the issue; the result
should be more robust pageblock isolation.
- "mm: khugepaged: fix tracepoint UAF" (Vernon Yang):
Fix a use-after-free in khugepaged tracepoint handling. Make sure the
information recorded by tracing stays valid for as long as the trace
event needs it.
- "mm/damon: fix DAMOS bugs in core, paddr and vaddr" (SJ Park):
Fix several DAMOS problems across the core and physical- and
virtual-address backends. The changes close error cases and bring the
implementations back into agreement.
- "mm/hugetlb_cgroup: move the per-node usage along with the folio"
(Hongfu Li):
Move HugeTLB per-node usage accounting when folios migrate between
nodes or are reparented to another cgroup. Otherwise numa_stat can
retain stale charges and even underflow when the folio is freed.
- "docs/core-api: memory-allocation: add k[mz]alloc_obj() and clarify
kmalloc" (Mike Rapoport):
Document the typed k[mz]alloc_obj() allocation helpers and clear up
some kmalloc guidance. Make it easier for callers to choose the right
interface.
- "selftests/mm: Validate selections and scope memfd_secret setup"
(Tianyi Chen):
Check selftest selections before running and confine memfd_secret
setup to the cases that actually need it. Avoid confusing failures
caused by the test harness itself.
- "mm/damon: move zero damos quota target_value handling to the core
layer" (SJ Park):
Handle a zero DAMOS quota goal target in the core rather than making
each user of the interface invent its own rule. Keep quota decisions
consistent across callers.
- "mm/damon: Introduce a huge page collapsing mechanism using auto
tuning" (Asier Gutierrez):
Add an auto-tuned DAMON mechanism for collapsing huge pages. Use
monitoring feedback to decide when collapse is worthwhile rather than
forcing one fixed policy onto every workload.
- "kmemleak: fix stale documentation and raise the verbose default"
(Breno Leitao):
Bring the kmemleak documentation up to date and require a third
confirming scan before verbose kernels print a suspected leak. The
extra scan helps suppress transient false positives in noisy debug
builds.
- "mm/memory: improve insert_pages() error handling" (Avi Weiss):
Tighten insert_pages() error handling so partial failures are
reported and cleaned up consistently. The caller should not have to
guess how far the operation got.
- "mm/damon: allow NULL or unstarted damon_ctx parameter for
damon_call()" (SJ Park):
Make damon_call() handle NULL and not-yet-started contexts safely.
Simplify the rules for callers and avoid an indefinite wait on an
invalid state.
- "mm/damon: introduce pgidle_set probe filter type" (SJ Park):
Add a pgidle_set DAMON probe filter, giving monitoring users another
way to select pages by their idle-tracking state. Wire it through the
filter interfaces and tests.
- "mm/damon/core: remove unused helper functions" (Cheng-Han Wu):
Remove DAMON core helpers which no longer have callers. Keep the API
surface smaller rather than retaining dead code just in case.
- "mm: stop calling pmd_folio() on special PMDs" (Gregory Price):
Avoid calling pmd_folio() on special PMD mappings that have no struct
page. The old assumption could fault in procfs walkers; use the
normal-folio checks and handle those mappings properly.
- "mm: remove three unused helpers from mm.h" (Tal Zussman):
Remove three unused helpers from mm.h. Fewer obsolete interfaces for
the next person to stumble over.
- "mm/damon: improvements in efficiency, error handling, documents"
(Liew Rui Yan):
Skip needless DAMOS quota work once the quota is full, propagate a
missing sysfs error and tidy a couple of comments. The ignored error
could make a monitoring-start request appear successful when it
wasn't.
- "docs/mm/damon/design: add explanation of nr_snapshots" (Liew Rui
Yan):
Explain DAMON's nr_snapshots accounting in the design documentation
and straighten out the associated terminology. Make it clearer what
users should expect from that counter.
- "selftests/cgroup: fixes for test_zswap on single core VM" (Wilson
Felipe Pereira):
Fix two test_zswap failures on single-CPU VMs. Wait for the exiting
child's cgroup to become unpopulated before reconfiguring it, and
avoid another test assumption which breaks under constrained
scheduling.
- "docs/ksm: fix advisor documentation and comment" (Jinjiang Tu):
Correct the KSM advisor documentation and a misleading code comment.
Keep the description aligned with how the advisor actually works.
- "Fix bugs in HugeTLB allocation when mem_cgroup_charge_hugetlb()
fails" (Ackerley Tng):
Fix HugeTLB allocation cleanup when the memcg charge fails. Make sure
failure exits undo what was allocated rather than leaving stale
accounting or resources behind.
- "mm, memcg: fix memory.peak reset clobbering other fds' watermark"
(Ridong Chen):
Fix memory.peak reset handling so resetting one file descriptor
doesn't overwrite the watermark kept for another. Keep those per-open
measurements independent as intended.
- "mm: reject zone device folios in more folio walkers" (Gregory
Price):
Reject zone-device folios in page walkers that cannot safely handle
them. Extend the existing checks rather than assuming every folio has
ordinary system-memory backing.
- "percpu: remove code with no effect" (Sang-Heon Jeon):
Remove a few pieces of percpu code which no longer do anything. There
is no reason to keep maintaining dead paths.
* tag 'mm-stable-2026-10-19-21-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (539 commits)
mm: shmem: assign a lock class to the unused huge shrinklist
mm: vmscan: put rotation-missed folios at the LRU tail
mm: kmemleak: scan the struct page array in MAX_SCAN_SIZE batches
mm: kmemleak: move the struct page scan into a helper
mm/damon: document that a zero sample_interval is accepted
mm/damon: fix typos in comments
mm/damon/sysfs: propagate damon_call() error in turn_damon_on
mm/damon/core: skip quota score setup when the quota is full
mm/damon/tests/core-kunit: test the size charged for a filter-trimmed region
mm/damon/core: charge only the part of a region the filter left
mm: disallow raw PFN mappings of huge/shared zeropage
selftests/mm: zap whole PTE tables in the khugepaged race harness
selftests/mm: add memory-pressure threads to the khugepaged race harness
selftests/mm: race the collapse of windows with holes
selftests/mm: add khugepaged race harness
selftests/mm: check that one khugepaged pass collapses one window
selftests/mm: run every supported collapse order by default
selftests/mm: cover a shared-source collapse write race
selftests/mm: parameterize the mixed-source collapse case by source order
selftests/mm: add order-parameterized khugepaged collapse cases
...
|
|
Now every architecture has been converted to support
CONFIG_MMU_GATHER_RCU_TABLE_FREE, this configuration option no longer
makes any sense to keep around.
Therefore remove it, and remove all the dead code that existed for
!CONFIG_MMU_GATHER_RCU_TABLE_FREE architectures previously.
Additionally, CONFIG_MMU_GATHER_TABLE_FREE is no longer necessary, as all
architectures instead use CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE when a custom
__tlb_remove_table() is required, so remove this too.
A number of architectures only enabled CONFIG_MMU_GATHER_RCU_TABLE_FREE if
CONFIG_MMU was set, however the mmu_gather logic only actually does
something meaningful if CONFIG_MMU is set (mmu_gather.c is only compiled
in this case, for instance).
As a result, there's no need to gate any of this logic on CONFIG_MMU
explicitly.
CONFIG_PT_RECLAIM however does have a strict dependency on CONFIG_MMU, so
make this dependency explicit.
Additionally, correct comments to remove references to non-RCU page table
gathering and make it clear that this is not 'semi-RCU', nor has it been
since commit 1fb3d8c20bfa ("mm/mmu_gather: replace IPI with
synchronize_rcu() when batch allocation fails").
With this change in place the kernel policy is now that userspace page
tables are freed after an RCU grace period, and thus it is now safe to
unconditionally perform page table walks under RCU, safe in the knowledge
that page tables will not be freed underneath the walker.
This is all that is guaranteed, however, so naturally it is still
incumbent upon page table walkers to ensure that the page table entries
are as expected.
Link: https://lore.kernel.org/20260925-rcu-pagetable-freeing-v5-11-31e91065fea4@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <nico.pache@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Usama Arif <usama.arif@linux.dev>
Cc: Guo Ren <guoren@kernel.org>
Cc: Brian Cain <bcain@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Schuster <schuster.simon@siemens-energy.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <james.bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <chleroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qi Zheng <qi.zheng@linux.dev>
|
|
Enable HAVE_PERF_EVENTS without any hardware events (since
there's no hardware), that just needs to select the symbol
and provide an empty asm/perf_event.h.
Link: https://patch.msgid.link/20260921230739.587996-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow deselecting CONFIG_MMU to build a no-MMU
UML kernel.
Signed-off-by: Hajime Tazaki <thehajime@gmail.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
[drop defconfig file, minor adjustments/fixes, rewrite message]
Link: https://patch.msgid.link/20260723113633.dc6b7df78016.Id9eb1e435a7d9ee75ec3e25db69ed3e8ff202a58@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
kconfiglint reports:
K008: config MAGIC_SYSRQ has prompts in 2 separate definitions
MAGIC_SYSRQ is defined in two places with complementary conditions:
arch/um/Kconfig:213 — depends on MCONSOLE (UML only)
lib/Kconfig.debug:665 — depends on !UML (everything except UML)
The UML definition has existed since the initial git import in
commit 1da177e4c3f4 ("Linux-2.6.12-rc2"). UML needs MAGIC_SYSRQ to work
through its mconsole interface rather than through keyboard input, so the
UML version depends on MCONSOLE while the generic version excludes UML
entirely with `depends on !UML`.
These two definitions are logically complementary: on UML, MAGIC_SYSRQ
requires MCONSOLE; on everything else, it has no special dependencies.
This can be expressed as a single definition with
`depends on !UML || MCONSOLE`, which evaluates to:
- On UML: requires MCONSOLE (same as before)
- On non-UML: always satisfiable (same as before)
Consolidate into the generic definition in lib/Kconfig.debug by changing
the dependency to `depends on !UML || MCONSOLE` and merging the UML-
specific help text that explains the mconsole-based sysrq interface.
Remove the now-redundant definition from arch/um/Kconfig.
This follows the same unification pattern used by commit 7bd291abe2da
("sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig") and our earlier
SCHED_MC consolidation for SH.
No functional change — the resulting Kconfig behavior is identical.
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://patch.msgid.link/20260426000339.57049-1-sashal@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Clang 20 and 21 miscompute __builtin_object_size() when -fprofile-arcs
is active on 32-bit UML targets, which passes incorrect object size
calculations for local variables through always_inline copy_to_user()
and check_copy_size(), causing spurious compile-time errors:
include/linux/ucopysize.h:52:4: error: call to '__bad_copy_from' declared with 'error' attribute: copy source size is too small
The regression was introduced in LLVM commit 02b8ee281947 ("[llvm]
Improve llvm.objectsize computation by computing GEP, alloca and malloc
parameters bound"), which shipped in Clang 20. It was fixed in LLVM
by commit 45b697e610fd ("[MemoryBuiltins] Consider index type size
when aggregating gep offsets"), which was backported to the LLVM 22.x
release branch.
The bug requires 32-bit UML + GCOV_PROFILE_ALL (which uses -fprofile-arcs),
though the exact trigger depends on optimizer decisions influenced by other
enabled configs.
Prevent the bad combination by disabling UML's ARCH_HAS_GCOV_PROFILE_ALL
on 32-bit when using Clang 20.x or 21.x.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604030531.O6FveVgn-lkp@intel.com/
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Assisted-by: Claude:claude-opus-4-6[1m]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260409052038.make.995-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/e2217546504668b8a87a39eb0e378839339a1bb4.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
um doesn't support KASAN_INLINE together with STATIC_LINK.
Instead of failing the build, disable KASAN_INLINE when
STATIC_LINK is selected.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511290451.x9GZVJ1l-lkp@intel.com/
Fixes: 1e338f4d99e6 ("kasan: introduce ARCH_DEFER_KASAN and unify static key across modes")
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/2620ab0bbba640b6237c50b9c0dca1c7d1142f5d.1764410067.git.chleroy@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add initial symmetric multi-processing (SMP) support to UML. With
this support enabled, users can tell UML to start multiple virtual
processors, each represented as a separate host thread.
In UML, kthreads and normal threads (when running in kernel mode)
can be scheduled and executed simultaneously on different virtual
processors. However, the userspace code of normal threads still
runs within their respective single-threaded stubs.
That is, SMP support is currently available both within the kernel
and across different processes, but still remains limited within
threads of the same process in userspace.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027001815.1666872-6-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The file-based iomem emulation was introduced to support writing
paravirtualized drivers based on emulated iomem regions. However,
the only driver that makes use of it is an example driver called
mmapper, which was written over two decades ago.
We now have several modern device emulation mechanisms, such as
vhost-user-based virtio-uml. Remove the file-based iomem emulation
support to reduce the maintenance burden.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20251027054519.1996090-5-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull uml updates from Johannes Berg:
- minor preparations for SMP support
- SPARSE_IRQ support for kunit
- help output cleanups
* tag 'uml-for-linux-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Remove unused ipi_pipe field from cpuinfo_um
um: Remove unused cpu_data and current_cpu_data macros
um: Stop tracking virtual CPUs via mm_cpumask()
um: Centralize stub size calculations
um: Remove outdated comment about STUB_DATA_PAGES
um: Remove unused offset and child_err fields from stub_data
um: Indent time-travel help messages
um: Fix help message for ssl-non-raw
um: vector: Fix indentation for help message
um: Add missing trailing newline to help messages
um: virtio-pci: implement .shutdown()
um: Support SPARSE_IRQ
|
|
Patch series "kasan: unify kasan_enabled() and remove arch-specific
implementations", v6.
This patch series addresses the fragmentation in KASAN initialization
across architectures by introducing a unified approach that eliminates
duplicate static keys and arch-specific kasan_arch_is_ready()
implementations.
The core issue is that different architectures have inconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions
or always-on behavior
This patch (of 2):
Introduce CONFIG_ARCH_DEFER_KASAN to identify architectures [1] that need
to defer KASAN initialization until shadow memory is properly set up, and
unify the static key infrastructure across all KASAN modes.
[1] PowerPC, UML, LoongArch selects ARCH_DEFER_KASAN.
The core issue is that different architectures haveinconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own
kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions or always-on
behavior
This patch addresses the fragmentation in KASAN initialization across
architectures by introducing a unified approach that eliminates duplicate
static keys and arch-specific kasan_arch_is_ready() implementations.
Let's replace kasan_arch_is_ready() with existing kasan_enabled() check,
which examines the static key being enabled if arch selects
ARCH_DEFER_KASAN or has HW_TAGS mode support. For other arch,
kasan_enabled() checks the enablement during compile time.
Now KASAN users can use a single kasan_enabled() check everywhere.
Link: https://lkml.kernel.org/r/20250810125746.1105476-1-snovitoll@gmail.com
Link: https://lkml.kernel.org/r/20250810125746.1105476-2-snovitoll@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217049
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> #powerpc
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Marco Elver <elver@google.com>
Cc: Qing Zhang <zhangqing@loongson.cn>
Cc: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Motivation: IRQ KUnit tests are going to require CONFIG_SPARSE_IRQ [1] in
order to:
(a) reliably allocate additional (fake) IRQs and
(b) ensure we can test managed affinity, which is only supported with
SPARSE_IRQ.
It seems that the only thing necessary for ARCH=um is to tell the genirq
core to skip over our preallocated NR_IRQS.
Tested with:
$ ./tools/testing/kunit/kunit.py run
[...]
[13:55:58] Testing complete. Ran 676 tests: passed: 646, skipped: 30
[...]
This compares with pre-patch results:
Ran 672 tests: passed: 644, skipped: 28
i.e., we no longer skip tests that 'depend on SPARSE_IRQ', and existing
tests all pass.
[1]
[PATCH v2 4/6] genirq/test: Depend on SPARSE_IRQ
https://lore.kernel.org/all/CABVgOSngoD0fh1WEkUCEwSdk0Joypo3dA_Y_SjW+K=nVDnZs3Q@mail.gmail.com/
Signed-off-by: Sinan Nalkaya <sardok@gmail.com>
[Brian: Adapted Sinan's patch; rewrote commit message]
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a generic ARCH_HAS_CACHE_LINE_SIZE option introduced by
commit c2280be81de4 ("mm: generalize ARCH_HAS_CACHE_LINE_SIZE")
in mm/Kconfig. Select that instead.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250708090403.1067440-4-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Implement syscall tracepoints through the generic tracing infrastructure.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20250703-uml-have_syscall_tracepoints-v1-2-23c1d3808578@linutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
arch/um is one of the last users of CONFIG_GENERIC_IOMAP, but upon
closer look it appears that the PCI host bridge does not register
any port I/O, and the absense of both custom inb/outb functions and
a PCI_IOBASE constant means that actually trying to use port I/O
results on a NULL pointer access.
Build testing with clang confirms this by warning about this exact
problem:
include/asm-generic/io.h:549:31: error: performing pointer arithmetic on a null pointer has undefined behavior [-Werror,-Wnull-pointer-arithmetic]
549 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
Remove all the Kconfig selects that refer to legacy port I/O
and instead just build the normal MMIO path that is emulated
by the virtio PCI host.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250509084125.1488601-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Mark read-only data actually read-only (simple mprotect), and
to be able to test it also implement _nofault accesses. This
works by setting up a new "segv_continue" pointer in current,
and then when we hit a segfault we change the signal return
context so that we continue at that address. The code using
this sets it up so that it jumps to a label and then aborts
the access that way, returning -EFAULT.
It's possible to optimize the ___backtrack_faulted() thing by
using asm goto (compiler version dependent) and/or gcc's (not
sure if clang has it) &&label extension, but at least in one
attempt I made the && caused the compiler to not load -EFAULT
into the register in case of jumping to the &&label from the
fault handler. So leave it like this for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250210160926.420133-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This selects the THREAD_INFO_IN_TASK option for UM and changes the way
that the current task is discovered. This is trivial though, as UML
already tracks the current task in cpu_tasks[] and this can be used to
retrieve it.
Also remove the signal handler code that copies the thread information
into the IRQ stack. It is obsolete now, which also means that the
mentioned race condition cannot happen anymore.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Hajime Tazaki <thehajime@gmail.com>
Link: https://patch.msgid.link/20241111102910.46512-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The PTRACE_GETREGSET API has now existed since Linux 2.6.33. The XSAVE
CPU feature should also be sufficiently common to be able to rely on it.
With this, define our internal FP state to be the hosts XSAVE data. Add
discovery for the hosts XSAVE size and place the FP registers at the end
of task_struct so that we can adjust the size at runtime.
Next we can implement the regset API on top and update the signal
handling as well as ptrace APIs to use them. Also switch coredump
creation to use the regset API and finally set HAVE_ARCH_TRACEHOOK.
This considerably improves the signal frames. Previously they might not
have contained all the registers (i386) and also did not have the
sizes and magic values set to the correct values to permit userspace to
decode the frame.
As a side effect, this will permit UML to run on hosts with newer CPU
extensions (such as AMX) that need even more register state.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241023094120.4083426-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In time-travel mode userspace can do a lot of work without any time
passing. Unfortunately, this can result in OOM situations as the RCU
core code will never be run.
Work around this by keeping track of userspace processes that do not
yield for a lot of operations. When this happens, insert a jiffie into
the sched_clock clock to account time against the process and cause the
bookkeeping to run.
As sched_clock is used for tracing, it is useful to keep it in sync
between the different VMs. As such, try to remove added ticks again when
the actual clock ticks.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241010142537.1134685-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The larger memory space is useful to support more applications inside
UML. One example for this is ASAN instrumentation of userspace
applications which requires addresses that would otherwise not be
available.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20240919124511.282088-11-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS is not defined anywhere.
In the submitted patch set [1], the first patch "um/kconfig: introduce
CC_CAN_LINK_STATIC_NO_RUNTIME_DEPS" was not applied.
Only 2/3 and 3/3 were applied, which are now:
- 730586ff7fad ("um: Allow static linking for non-glibc implementations")
- 5e1121cd43d4 ("um: Some fixes to build UML with musl")
Given that nobody has noticed the missing first patch for many years,
it seems it was unnecessary.
[1]: https://lore.kernel.org/lkml/20200719210222.2811-1-ignat@cloudflare.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20240924113342.32530-1-masahiroy@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no such symbol and we currently don't have any of the
mechanisms to make boot-time selection cheap enough, so we can't
have HAVE_PREEMPT_DYNAMIC_CALL or HAVE_PREEMPT_DYNAMIC_KEY.
Remove the select statement.
Reported-by: Lukas Bulwahn <lbulwahn@redhat.com>
Fixes: cd01672d64a3 ("um: Enable preemption in UML")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Since userspace state is saved in the MM process, kernel using
FPU still doesn't really need to do anything, so this really
is as simple as enabling preemption. The irq critical section
in sigio_handler() needs preempt_disable()/preempt_enable().
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://patch.msgid.link/20240702102549.d2fcea450854.I12f5a53d80ec1e425e66ef272b1e95cb523b608e@changeid
[rebase, remove FPU save/restore, fix x86/um Makefile,
rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can select ARCH_HAS_UBSAN, it works just fine. It had been
enabled and we even used it, but then commit 890a64810d59
("ubsan: Restore dependency on ARCH_HAS_UBSAN") (correctly)
disabled it again, enable ARCH_HAS_UBSAN to get it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240701220034.995eb04d656d.Ia29fe091b207fe66b5e26298c1e427ebcf131642@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
At present, Rust in the kernel only supports 64-bit x86, so UML has
followed suit. However, it's significantly easier to support 32-bit i386
on UML than on bare metal, as UML does not use the -mregparm option
(which alters the ABI), which is not yet supported by rustc[1].
Add support for CONFIG_RUST on um/i386, by adding a new target config to
generate_rust_target, and replacing various checks on CONFIG_X86_64 to
also support CONFIG_X86_32.
We still use generate_rust_target, rather than a built-in rustc target,
in order to match x86_64, provide a future place for -mregparm, and more
easily disable floating point instructions.
With these changes, the KUnit tests pass with:
kunit.py run --make_options LLVM=1 --kconfig_add CONFIG_RUST=y
--kconfig_add CONFIG_64BIT=n --kconfig_add CONFIG_FORTIFY_SOURCE=n
An earlier version of these changes was proposed on the Rust-for-Linux
github[2].
[1]: https://github.com/rust-lang/rust/issues/116972
[2]: https://github.com/Rust-for-Linux/linux/pull/966
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20240604224052.3138504-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. UML supports these via its UML_IOMEM_EMULATION so let that
select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://patch.msgid.link/20240403124300.65379-2-schnelle@linux.ibm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Add support for Landlock to UML.
To do this, this fixes the way hostfs manages inodes according to the
underlying filesystem [1]. They are now properly handled as for other
filesystems, which enables Landlock support (and probably other
features).
This also extends Landlock's tests with 6 pseudo filesystems,
including hostfs"
[1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/
* tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add hostfs tests
selftests/landlock: Add tests for pseudo filesystems
selftests/landlock: Make mounts configurable
selftests/landlock: Add supports_filesystem() helper
selftests/landlock: Don't create useless file layouts
hostfs: Fix ephemeral inodes
|
|
check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230613224545.493148694@linutronix.de
|
|
hostfs creates a new inode for each opened or created file, which
created useless inode allocations and forbade identifying a host file
with a kernel inode.
Fix this uncommon filesystem behavior by tying kernel inodes to host
file's inode and device IDs. Even if the host filesystem inodes may be
recycled, this cannot happen while a file referencing it is opened,
which is the case with hostfs. It should be noted that hostfs inode IDs
may not be unique for the same hostfs superblock because multiple host's
(backed) superblocks may be used.
Delete inodes when dropping them to force backed host's file descriptors
closing.
This enables to entirely remove ARCH_EPHEMERAL_INODES, and then makes
Landlock fully supported by UML. This is very useful for testing
changes.
These changes also factor out and simplify some helpers thanks to the
new hostfs_inode_update() and the hostfs_iget() revamp: read_name(),
hostfs_create(), hostfs_lookup(), hostfs_mknod(), and
hostfs_fill_sb_common().
A following commit with new Landlock tests check this new hostfs inode
consistency.
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230612191430.339153-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Only a handful of changes are necessary to get it to work.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Because having them all dumped at top-level is a bit messy.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
CONFIG_RUST currently supports x86_64, but does not support it under
UML. With the previous patches applied, adding support is trivial:
add CONFIG_HAVE_RUST to UML if X86_64 is set.
The scripts/generate_rust_target.rs file already checks for
CONFIG_X86_64, not CONFIG_X86, so is prepared for UML support.
The Rust support does not currently support X86_32.
Also, update the Rust architecture support documentation to not that
this is being maintained: I intend to look after this as best I can.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
Tested-by: Sergio González Collado <sergio.collado@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Enable FORTIFY_SOURCE so running Kunit tests can test fortified
functions.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20220210003224.773957-1-keescook@chromium.org
|
|
Make KASAN run on User Mode Linux on x86_64.
The UML-specific KASAN initializer uses mmap to map the ~16TB of shadow
memory to the location defined by KASAN_SHADOW_OFFSET. kasan_init()
utilizes constructors to initialize KASAN before main().
The location of the KASAN shadow memory, starting at
KASAN_SHADOW_OFFSET, can be configured using the KASAN_SHADOW_OFFSET
option. The default location of this offset is 0x100000000000, which
keeps it out-of-the-way even on UML setups with more "physical" memory.
For low-memory setups, 0x7fff8000 can be used instead, which fits in an
immediate and is therefore faster, as suggested by Dmitry Vyukov. There
is usually enough free space at this location; however, it is a config
option so that it can be easily changed if needed.
Note that, unlike KASAN on other architectures, vmalloc allocations
still use the shadow memory allocated upfront, rather than allocating
and free-ing it per-vmalloc allocation.
If another architecture chooses to go down the same path, we should
replace the checks for CONFIG_UML with something more generic, such
as:
- A CONFIG_KASAN_NO_SHADOW_ALLOC option, which architectures could set
- or, a way of having architecture-specific versions of these vmalloc
and module shadow memory allocation options.
Also note that, while UML supports both KASAN in inline mode
(CONFIG_KASAN_INLINE) and static linking (CONFIG_STATIC_LINK), it does
not support both at the same time.
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Co-developed-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Various cleanups and fixes: xterm, serial line, time travel
- Set ARCH_HAS_GCOV_PROFILE_ALL
* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix out-of-bounds read in LDT setup
um: chan_user: Fix winch_tramp() return value
um: virtio_uml: Fix broken device handling in time-travel
um: line: Use separate IRQs per line
um: Enable ARCH_HAS_GCOV_PROFILE_ALL
um: Use asm-generic/dma-mapping.h
um: daemon: Make default socket configurable
um: xterm: Make default terminal emulator configurable
|
|
Enable ARCH_HAS_GCOV_PROFILE_ALL so that CONFIG_GCOV_PROFILE_ALL can be
selected on UML. I didn't need to explicitly disable GCOV on anything
to get this to work on the configs I tested.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
include/{linux,asm-generic}/export.h defines a weak symbol, __crc_*
as a placeholder.
Genksyms writes the version CRCs into the linker script, which will be
used for filling the __crc_* symbols. The linker script format depends
on CONFIG_MODULE_REL_CRCS. If it is enabled, __crc_* holds the offset
to the reference of CRC.
It is time to get rid of this complexity.
Now that modpost parses text files (.*.cmd) to collect all the CRCs,
it can generate C code that will be linked to the vmlinux or modules.
Generate a new C file, .vmlinux.export.c, which contains the CRCs of
symbols exported by vmlinux. It is compiled and linked to vmlinux in
scripts/link-vmlinux.sh.
Put the CRCs of symbols exported by modules into the existing *.mod.c
files. No additional build step is needed for modules. As before,
*.mod.c are compiled and linked to *.ko in scripts/Makefile.modfinal.
No linker magic is used here. The new C implementation works in the
same way, whether CONFIG_RELOCATABLE is enabled or not.
CONFIG_MODULE_REL_CRCS is no longer needed.
Previously, Kbuild invoked additional $(LD) to update the CRCs in
objects, but this step is unneeded too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
|
|
Add a dtb=<filename> option to boot UML with a devicetree blob. This
can be used for testing driver code using UML.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
[rw: Add dependency on CONFIG_OF]
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Remove address space overrides using set_fs() for User Mode Linux.
Note that just like the existing kernel access case of the uaccess
routines the new nofault kernel handlers do not actually have any
exception handling. This is probably broken, but not change to the
status quo.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Now that all architectures have a working futex implementation in any
configuration, remove the runtime detection code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Support for VMAP_STACK
- Support for splice_write in hostfs
- Fixes for virt-pci
- Fixes for virtio_uml
- Various fixes
* tag 'for-linus-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix stub location calculation
um: virt-pci: fix uapi documentation
um: enable VMAP_STACK
um: virt-pci: don't do DMA from stack
hostfs: support splice_write
um: virtio_uml: fix memory leak on init failures
um: virtio_uml: include linux/virtio-uml.h
lib/logic_iomem: fix sparse warnings
um: make PCI emulation driver init/exit static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
|
|
This works just fine, so select HAVE_ARCH_VMAP_STACK to
let users enable VMAP_STACK if desired.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Make architectures select TRACE_IRQFLAGS_SUPPORT instead of
having many defines.
Link: https://lkml.kernel.org/r/20210731052233.4703-2-masahiroy@kernel.org
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com> #arch/arc
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the polariy
on these Kconfig symbols to require architectures to select them when
they provide their own version.
The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER.
The remaining architectures at the moment are: ia64, mips, parisc,
um and xtensa. We should probably convert these as well, but
I was not sure how far to take this series. Thomas Bogendoerfer
had some concerns about converting mips but may still do some
more detailed measurements to see which version is better.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
1. Reflect host cpu flags into the UML instance so they can
be used to select the correct implementations for xor, crypto, etc.
2. Reflect host cache alignment into UML instance. This is
important when running 32 bit on a 64 bit host as 32 bit by
default aligns to 32 while the actual alignment should be 64.
Ditto for some Xeons which align at 128.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
