| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- A bunch of improvements in dt-check-style. Fix various bindings based
on these additional checks.
- Convert hisilicon,hix5hd2-ir, hisilicon,hi6220-ade,
hisilicon,hi6220-dsi, hisilicon,hip05-sas-v1, MediaTek RT5650 codecs,
mediatek,g3dsys, mediatek,mt2701-scpsys, ti,omap-mpu, and
ti,omap-ocp2scp to DT schema format
- Add schemas for ST STM32MP2 DWC3 xHCI USB, ST STM32MP25 USB2-FEMTO
PHY, spacemit,k1-gpu and spacemit,k3-gpu, HiSilicon local bus,
HiSilicon HIP05 CPLD, SDMC DM2016, and QCom SM7250 and Kuno PDC
- Various binding updates to fix schema warnings in .dts files
- Drop obsolete .txt bindings for STM32(MP1) RCC, VExpress hwmon and
regulator, and mailbox.txt
- Remove the unused of_overlay_remove_all() function
- Fixes for of_check_msi_parent()
- Add "i2c-parent" tracking to fw_devlink
* tag 'devicetree-for-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (72 commits)
dt-bindings: usb: dwc3: Document ST STM32MP2 DWC3 xHCI USB controller
dt-bindings: iommu: Describe MT8195 infra IRQs
dt-bindings: clock: mediatek: Add MT8516 fallbacks
dt-bindings: media: Convert hisilicon,hix5hd2-ir to DT schema
dt-bindings: display: Convert hisilicon,hi6220-ade to DT schema
dt-bindings: display: Convert hisilicon,hi6220-dsi to DT schema
dt-bindings: phy: Document ST STM32MP25 USB2-FEMTO PHY
of: overlay: remove unused of_overlay_remove_all()
dt-bindings: power: Convert mediatek,mt2701-scpsys to DT schema
dt-bindings: bus: Add HiSilicon local bus
dt-bindings: gpu: img,powervr-rogue: add spacemit,k1-gpu and spacemit,k3-gpu
dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
dt-bindings: vendor-prefixes: add Ambarella
dt-bindings: reset: Drop obsolete STM32(MP1) RCC bindings
dt-bindings: arm: keystone: ti,sci: Correct reg and mboxes constraints
dt-bindings: ASoC: Convert MediaTek RT5650 codecs bindings to DT schema
dt-bindings: scsi: Convert hisilicon,hip05-sas-v1 to DT schema
of/irq: Stop the MSI walk at the first msi-parent
of/irq: Fix device node refcount leak in of_check_msi_parent()
dt-bindings: display: faraday,tve200: Use a level-high interrupt
...
|
|
The ON Semiconductor PCA9655E is a 16-bit I2C GPIO expander that the
pca953x driver handles as a PCA9555: both entries of its OF match
table carry OF_953X(16, PCA_INT), and onnn,pca9655 has been there since
commit 6d49b3a0f351 ("gpio: pca953x: Add support for the On Semi
pca9655"). Document it with nxp,pca9555 as the fallback, the form the
comments in armada-388-clearfog.dtsi and armada-388-helios4.dts ask
for.
Signed-off-by: Igor Velkov <iav@iav.lv>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20261009-helios64-pca9655-v1-1-673ee4432650@iav.lv
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add a Devicetree binding for the SGPIO controller found on the
Axiado AX3005 SoC.
Each SGPIO position provides one fixed-direction input GPIO and one
fixed-direction output GPIO. Input GPIOs support edge-triggered
interrupts.
The controller serializes output values and samples input values over
dedicated data, clock, and latch signals.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Petar Stepanovic <pstepanovic@axiado.com>
Link: https://patch.msgid.link/20260921-axiado-ax3000-sgpio-controller-v4-1-79c444be7faf@axiado.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Document support for the GPIO controller blocks in the
Renesas R-Car X5H (R8A78000) SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260917035438.523010-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Allow parsing GPIO controller children nodes with GPIO hogs the same way
it is done by commit 545908a9fb9c ("dt-bindings: gpio-mmio: Support
hogs") and commit e8f2ca6be61f ("dt-bindings: gpio: ast2400-gpio: Add
hogs parsing").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/0b17cd7e24ea9a92a3e5268a1f9e5a840960ac6d.1789375913.git.michal.simek@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add 'gpio-ranges' optional property to reflect driver changes.
Signed-off-by: Michael Zavertkin <misha.zavertkin@mail.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/bd1fd3ab47001c303e62d331486779c2be6d6eb3.1787830440.git.misha.zavertkin@mail.ru
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add compatible strings for the GPIO controllers on the Tegra268 device.
The Tegra268 device has the same GPIO controllers as Tegra264, but only
has a subset of the pins and hence, GPIOs.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260828-tegra-tegra268-gpio-v1-1-317bd91295e2@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Fix spelling errors found by the kernel's scripts/spelling.txt
and codespell in several devicetree binding documents:
- "curent" -> "current" in adi,ltc2991.yaml
- "deivce" -> "device" in zii,rave-sp-eeprom.yaml
- "ouput" -> "output" in delta,tn48m-gpio.yaml
- "redudant" -> "redundant" in trivial-devices.yaml
Signed-off-by: Zhijian Han <hanzhijian1991@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260828095459.834657-1-hanzhijian1991@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
QorIQ GPIO controllers may have hogs in device nodes, so let's expose
it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://patch.msgid.link/20260825-for-upstream-dt-qoriq-gpio-hog-v3-1-b99bda4f44d7@free.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a DT maintainer profile document
- Various dt-check-style improvements
- Add a devres managed reserved memory region init function
- Print node name on any skipped reserved memory regions
- Correctly handle optional argument in
of_parse_phandle_with_args_map()
- Convert ti,keystone-reset, ti,da850-vpif, TI L4 interconnect, TI
SmartReflex, microchip,pic32mzda-dmt, microchip,pic32mzda-wdt, TI
DA8XX MSTPRI bus, and Xen VM bindings to DT schema format
- Add bindings for StarFive JHB100 plic, Allwinner A733 NMI controller,
MediaTek MT8173 GPU, QCom Shikra, Eliza, and Maili cpu-bwmon, and
QCom Shikra SCM firmware
- A couple of syntax fixes found using PoC Rust implementation of
dtschema tools
- Clean-ups for typos, brackets, incorrect "::" usages, and
white-space style
* tag 'devicetree-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible
dtc: dt-check-style: Simplify setting depth of DtsLine
dtc: dt-check-style: Add missing /dts-v1/ to few test cases
dt-bindings: power: reset: ti,keystone-reset: Convert to DT schema
media: dt-bindings: ti,da850-vpif: Convert to dt-schema
dt-bindings: devfreq: samsung,exynos-ppmu: Use standard regex syntax
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop invalid JSON pointer
dt-bindings: arm: omap: Convert L4 interconnect to DT schema
dt-bindings: power: Convert TI SmartReflex to DT schema
of: reserved_mem: Introduce devres-managed initialization function
dt-bindings: interrupt-controller: Add StarFive JHB100 plic
dt-bindings: irq: sun7i-nmi: Document the Allwinner A733 NMI controller
dt-bindings: Correct white-space style
dt-bindings: fix typos and brackets
docs: dt: submitting-patches: Mention expectation about dt-check-style
docs: dt: maintainer: Add Devicetree and OF maintainer profile document
docs: dt: writing-schema: Extend expectations about example part of binding
dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU
of: base: Handle optional argument in of_parse_phandle_with_args_map()
dt-bindings: update Sudeep Holla's email address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
|
|
Some Rockchip SoCs, such as the RV1106, give each GPIO bank its own
IO control (IOC) register block rather than grouping the registers of
all banks into a shared GRF region. Add an optional rockchip,grf
property to the gpio-bank binding so that each bank node can reference
the syscon for its own IOC block.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729072727.v3.2.d04a89a3849323a0dcee2c701cba43adbb0523b2@changeid
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Correct a few white-space issues, like double space after '=' or before
bracket '{' characters, which will be flagged by dt-check-style. No
functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # qcom,ath10k.yaml
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for Documentation/devicetree/bindings/pwm
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260801195613.235430-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Some QE GPIO pins have an associated interrupt line in the QE PIC to
signal state changes on the pin. Add the corresponding
interrupt-controller / nexus properties to the QE GPIO binding.
Because the GPIO controller does not perform any interrupt handling
itself, a nexus node (interrupt-map) is used to map each GPIO line
supporting IRQ to the parent QE PIC interrupt domain.
As the QE PIC can be configured to generate an interrupt on either a
high-to-low transition or any change in signal state, three
interrupt-map entries are needed per GPIO pin that can yield an
interrupt (falling, both, and the "none" case which defaults to both in
QE PIC). This overhead is necessary because the interrupt-map-pass-thru
property is not part of the DT specification.
The interrupt-map property is optional: it is not required for GPIO
banks that have no interrupt capable GPIO line (e.g. port D on MPC8323),
or when interrupt functionality is not used.
Update the example to show a scenario where each bank supports a
different numbers of IRQs, or no IRQs at all.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://lore.kernel.org/r/20260708-qe-pic-gpios-v2-4-1972044cfbd1@bootlin.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Convert QE GPIO devicetree binding to DT schema. The old binding uses
fsl,<chip>-qe-pario-bank because multiple MCP83XX SoC has support for
these GPIO banks. The best practice is to list out every <chip> instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://lore.kernel.org/r/20260708-qe-pic-gpios-v2-3-1972044cfbd1@bootlin.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Add binding for Axiado AX3005 GPIO controller. So far, no changes
are known, so it can fall back to the cdns,gpio-r1p02 compatible.
Signed-off-by: Swark Yang <syang@axiado.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-upstream-axiado-ax3005-upstream-v3-2-c429095143ec@axiado.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The Kinetic Technologies KTS1622 is a 16-bit general-purpose I/O
expander via the I2C bus for microcontrollers when additional I/Os
are needed while keeping interconnections to the minimum. Datasheet
comparison suggests that it is compatible with TCAL6416, add the
compatible string and TCAL6416 as a fallback compatible.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260711210131.236025-3-marex@nabladev.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add the device tree bindings for the Realtek DHC (Digital Home Center)
RTD1625 GPIO controllers.
The RTD1625 GPIO controller features a per-pin register architecture
that differs significantly from previous generations. It utilizes
separate register blocks for GPIO configuration and interrupt control.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260622092335.1166876-2-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
EIO (Extended IO) GPIO is a Xilinx IP block that exposes
multiplexed I/O pins through an EIO interface.
The EIO GPIO block has 2 banks with 26 GPIOs each (52 total).
The GPIO width cannot be determined from the hardware registers,
the driver relies on the compatible string to select the correct
bank/pin configuration. A new compatible is therefore required.
The block is currently present on xa2ve3288 silicon.
The compatible string uses version 1.0 matching the IP core version.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-3-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Sort the compatible string alphabetically.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-2-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
GPIO hogs are described in the gpio.txt binding as automatic default
GPIO configuration items.
Allow them for GPIO ports in DesignWare APB GPIO controller nodes.
Cc: Hoan Tran <hoan@os.amperecomputing.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Bartosz Golaszewski <brgl@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260507081710.4090814-8-zhengxingda@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The Waveshare DSI TOUCH family of panels has separate on-board GPIO
controller, which controls power supplies to the panel and the touch
screen and provides reset pins for both the panel and the touchscreen.
Also it provides a simple PWM controller for panel backlight.
Add bindings for these GPIO controllers. As overall integration might be
not very obvious (and it differs significantly from the bindings used by
the original drivers), provide complete example with the on-board
regulators and the DSI panel.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-waveshare-dsi-touch-v5-1-d2ac7ccc22d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The 74HC595 and 74LVC594 shift registers latch their outputs until the
first serial write, so boards that depend on a specific power-on pattern
(for example active-low indicators, reset lines, or other signals that
must come up non-zero) have no way to express that today: the Linux
driver always writes zeros from its zero-initialised buffer during
probe.
Document support for the existing lines-initial-states bitmask, already
defined for nxp,pcf8575, so the same convention covers this output-only
device. Bit N corresponds to GPIO line N. Because the 74HC595/74LVC594
family is push-pull output only (no input mode, no high-impedance state
under software control), bit=0 drives the line low and bit=1 drives it
high; this differs from nxp,pcf8575, where the 0/1 polarity reflects the
quasi-bidirectional nature of that part.
The bitmask covers up to 32 lines, which fits the typical 1-4 chip
cascades that appear in tree. Should longer chains require seeding in
the future, the property can be extended to a uint32-array without
breaking the bit-N-equals-line-N convention.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanhong Jung <happycpu@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260429035134.1023330-2-happycpu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core:
- Add a resource-managed version of alloc_workqueue()
(`devm_alloc_workqueue()`)
- Preserve the Open Firmware (OF) node when an ACPI handle
is present
Apple SMC:
- Wire up the Apple SMC power driver by adding a new MFD cell
Atmel HLCDC:
- Fetch the LVDS PLL clock as a fallback if the generic sys_clk
is unavailable
Broadcom BCM2835 PM:
- Add support for the BCM2712 power management device
- Introduce a hardware type identifier to distinguish SoC variants
Congatec CGBC, KEMPLD, RSMU, Si476x:
- Fix various kernel-doc warnings and correct struct member names
DLN2:
- Drop redundant USB device references and switch to managed
resource allocations
- Update bare 'unsigned' types to 'unsigned int'
ENE KB3930:
- Use the of_device_is_system_power_controller() wrapper
EZX PCAP:
- Avoid rescheduling after destroying the workqueue by switching
to a device-managed workqueue
- Drop redundant memory allocation error messages
- Return directly instead of using empty goto statements
Freescale i.MX25 TSADC:
- Convert devicetree bindings from TXT to YAML format
Freescale MC13xxx:
- Fix a memory leak in subdevice platform data allocation by
using devm_kmemdup()
Intel LPC ICH:
- Expose a software node for the GPIO controller cell to fix
GPIO lookups
Intel LPSS:
- Add PCI IDs for the Intel Nova Lake-H platform
Maxim MAX77620:
- Convert devicetree bindings from TXT to YAML format
- Document an optional I2C address for the MAX77663 RTC device
Maxim MAX77705:
- Make the max77705_pm_ops variable static to resolve a
sparse warning
MediaTek MT6397:
- Correct the hardware CIDs for the MT6328, MT6331, and MT6332
PMICs to allow proper driver binding
ROHM BD71828:
- Enable system wakeup via the power button
ROHM BD72720:
- Add a new compatible string for the ROHM BD73900 PMIC
SpacemiT P1:
- Drop the deprecated "vin-supply" property from the devicetree
bindings
- Add individual regulator supply properties to match actual
hardware topology
STMicroelectronics STPMIC1:
- Attempt system shutdown a second time to handle transient I2C
communication failures
Viperboard:
- Drop redundant USB device references"
* tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: core: Preserve OF node when ACPI handle is present
mfd: ene-kb3930: Use of_device_is_system_power_controller() wrapper
mfd: intel-lpss: Add Intel Nova Lake-H PCI IDs
dt-bindings: mfd: max77620: Document optional RTC address for MAX77663
dt-bindings: mfd: max77620: Convert to DT schema
mfd: ezx-pcap: Avoid rescheduling after destroying workqueue
mfd: ezx-pcap: Return directly instead of empty gotos
mfd: ezx-pcap: Drop memory allocation error message
mfd: bcm2835-pm: Add BCM2712 PM device support
mfd: bcm2835-pm: Introduce SoC-specific type identifier
dt-bindings: mfd: bd72720: Add ROHM BD73900
mfd: si476x: Fix kernel-doc warnings
mfd: rsmu: Remove a empty kernel-doc line
mfd: kempld: Fix kernel-doc struct member names
mfd: congatec: Fix kernel-doc struct member names
dt-bindings: mfd: Convert fsl-imx25-tsadc.txt to yaml format
mfd: viperboard: Drop redundant device reference
mfd: dln2: Switch to managed resources and fix bare unsigned types
mfd: macsmc: Wire up Apple SMC power driver
mfd: mt6397: Properly fix CID of MT6328, MT6331 and MT6332
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
|
|
Remove the cavium,thunder-8890 GPIO binding as there are no active
use cases. The binding is unused as the corresponding kernel driver
binds via PCI and not the compatible.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260408093313.17025-1-i.shihao.999@gmail.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The GPIO controller on PolarFire SoC supports more than one type of
interrupt and needs two interrupt cells.
Fixes: 735806d8a68e9 ("dt-bindings: gpio: add bindings for microchip mpfs gpio")
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260326-wise-gumdrop-49217723a72a@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Convert max77620 Device Tree bindings from TXT to YAML format. This patch
does not change any functionality; the bindings remain the same. The
thermal bindings are incorporated into the binding. GPIO controller
function in MAX77620 has no dedicated node and is folded into the parent
node itself.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260312085258.11431-4-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into gpio/for-next
Pull in the SCMI GPIO driver along with its pinctrl dependencies.
|
|
Traditionally, firmware will provide a GPIO interface or a pin control
interface. However, the SCMI protocol provides a generic pin control
interface and the GPIO support is built on top of that using the normal
pin control interfaces. Potentially, other firmware will adopt a
similar generic approach in the future.
Document how to configure the GPIO device.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The microchip,mpfs-gpio binding suffered greatly due to being written
with a narrow minded view of the controller, and the interrupt bits
ended up incorrect. It was mistakenly assumed that the interrupt
configuration was set by platform firmware, based on the FPGA
configuration, and that the GPIO DT nodes were the only way to really
communicate interrupt configuration to software.
Instead, the mux should be a device in its own right, and the GPIO
controllers should be connected to it, rather than to the PLIC.
Now that a binding exists for that mux, try to fix the misconceptions
in the GPIO controller binding.
Firstly, it's not possible for this controller to have fewer than 14
GPIOs, and thus 14 interrupts also. There are three controllers, with
14, 24 & 32 GPIOs each. The fabric core, CoreGPIO, can of course have
a customisable number of GPIOs.
The example is wacky too - it follows from the incorrect understanding
that the GPIO controllers are connected to the PLIC directly. They are
not however, with a mux sitting in between. Update the example to use
the mux as a parent, and the interrupt numbers at the mux for GPIO2 as
the example - rather than the strange looking, repeated <53>.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260318-fondly-tradition-90b8241f0cc8@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add the "realtek,rtl9607-gpio" compatible for GPIO nodes
on the RTL9607C SoC series.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20260305161106.15999-2-adilov@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Group/anonymous mailboxes are not accepted for bindings maintainers, so
switch from such linux @TQ mailbox to Alexander's email.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20260212110905.52842-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Both CoreGPIO and the hardened versions of it on mpfs and pic64gx have a
reset pin. For the former, usually this is wired to a common fabric
reset not managed by software and for the latter two the platform
firmware takes them out of reset on first-party boards (or those using
modified versions of the vendor firmware), but not all boards may take
this approach. Permit providing a reset in devicetree for Linux, or
other devicetree-consuming software, to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260303-irate-hungry-b54cda817e42@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controller found on Tegra264. The number of pins
is slightly different, but the programming model remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra264-gpio.h,
that defines port IDs as well as the TEGRA264_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
On Tegra, GPIO wake events are latched and routed via the PMC.
Document the standard DT property, wakeup-parent, which is a phandle to
the PMC interrupt controller that provides the parent wake interrupt
domain for the GPIO controller. If the property is absent the driver
falls back to a compatible-based lookup.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260128085114.1137725-1-pshete@nvidia.com
[Bartosz: fixed whitespace errors]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The AST2700 is the 7th generation SoC from Aspeed, featuring two SGPIO
master controllers: both with 256 serial inputs and outputs.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-5-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
In commit f48b5e8bc2e1 ("dt-bindings: gpio-mmio: Add compatible string
for opencores,gpio") we marked opencores,gpio to be allowed with
brcm,bcm6345-gpio. This was wrong, opencores,gpio is not compatible with
brcm,bcm6345-gpio. It has a different register map and is 8-bit vs
Broadcom which is 32-bit. Change opencores,gpio to be a separate
compatible string for MMIO GPIO.
Also, as this change rewrote the entire enum, I took this opportunity to
alphabetically sort the list.
Fixes: f48b5e8bc2e1 ("dt-bindings: gpio-mmio: Add compatible string for opencores,gpio")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260115151014.3956805-2-shorne@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.19-rc5
Pull in upstream shared GPIO fixes into the v7.0 branch.
|
|
Add new compatible string for SpacemiT K3 SoC's GPIO controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20260106-02-k3-gpio-v3-1-4800c214810b@gentoo.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Add dt-schema for a gpio-line-mux controller which exposes virtual
GPIOs for a shared GPIO controlled by a multiplexer, e.g. a gpio-mux.
The gpio-line-mux controller is a gpio-controller, thus has mostly the
same semantics. However, it requires a mux-control to be specified upon
which it will operate.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251227180134.1262138-2-jelonek.jonas@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
In FPGA Development boards with GPIOs we use the opencores gpio verilog
rtl. This is compatible with the gpio-mmio. Add the compatible string
to allow as below.
Example:
gpio0: gpio@91000000 {
compatible = "opencores,gpio", "brcm,bcm6345-gpio";
reg = <0x91000000 0x1>, <0x91000001 0x1>;
reg-names = "dat", "dirout";
gpio-controller;
#gpio-cells = <2>;
status = "okay";
};
Link: https://opencores.org/projects/gpio
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251217080843.70621-2-shorne@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
TCAL6408 and TCAL6416 supports latchable inputs and maskable interrupt.
add compatibles ti,tcal6408 and ti,tcal6416
The TI variants has the same programming model as the NXP PCAL6408 and
PCAL6416, but supports other supply voltages.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Link: https://lore.kernel.org/r/20251216-wip-jremmet-tcal6416rtw-v2-2-6516d98a9836@phytec.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
into gpio/for-next
Reset/GPIO/swnode changes for v6.19
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
|
|
pic64gx GPIO is compatible with mpfs-gpio controller, add it with a
fallback.
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251117-grumbly-oversized-2215fe887181@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
yamllint has gained a new check which checks for inconsistent quoting
(mixed " and ' quotes within a file). Fix all the cases yamllint found
so we can enable the check (once the check is in a release). As single
quotes are (slightly) preferred, use them throughout the modified files
even if double quotes are mostly used.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251015232015.846282-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2d6 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2d6 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
