| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- A bunch of improvements in dt-check-style. Fix various bindings based
on these additional checks.
- Convert hisilicon,hix5hd2-ir, hisilicon,hi6220-ade,
hisilicon,hi6220-dsi, hisilicon,hip05-sas-v1, MediaTek RT5650 codecs,
mediatek,g3dsys, mediatek,mt2701-scpsys, ti,omap-mpu, and
ti,omap-ocp2scp to DT schema format
- Add schemas for ST STM32MP2 DWC3 xHCI USB, ST STM32MP25 USB2-FEMTO
PHY, spacemit,k1-gpu and spacemit,k3-gpu, HiSilicon local bus,
HiSilicon HIP05 CPLD, SDMC DM2016, and QCom SM7250 and Kuno PDC
- Various binding updates to fix schema warnings in .dts files
- Drop obsolete .txt bindings for STM32(MP1) RCC, VExpress hwmon and
regulator, and mailbox.txt
- Remove the unused of_overlay_remove_all() function
- Fixes for of_check_msi_parent()
- Add "i2c-parent" tracking to fw_devlink
* tag 'devicetree-for-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (72 commits)
dt-bindings: usb: dwc3: Document ST STM32MP2 DWC3 xHCI USB controller
dt-bindings: iommu: Describe MT8195 infra IRQs
dt-bindings: clock: mediatek: Add MT8516 fallbacks
dt-bindings: media: Convert hisilicon,hix5hd2-ir to DT schema
dt-bindings: display: Convert hisilicon,hi6220-ade to DT schema
dt-bindings: display: Convert hisilicon,hi6220-dsi to DT schema
dt-bindings: phy: Document ST STM32MP25 USB2-FEMTO PHY
of: overlay: remove unused of_overlay_remove_all()
dt-bindings: power: Convert mediatek,mt2701-scpsys to DT schema
dt-bindings: bus: Add HiSilicon local bus
dt-bindings: gpu: img,powervr-rogue: add spacemit,k1-gpu and spacemit,k3-gpu
dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
dt-bindings: vendor-prefixes: add Ambarella
dt-bindings: reset: Drop obsolete STM32(MP1) RCC bindings
dt-bindings: arm: keystone: ti,sci: Correct reg and mboxes constraints
dt-bindings: ASoC: Convert MediaTek RT5650 codecs bindings to DT schema
dt-bindings: scsi: Convert hisilicon,hip05-sas-v1 to DT schema
of/irq: Stop the MSI walk at the first msi-parent
of/irq: Fix device node refcount leak in of_check_msi_parent()
dt-bindings: display: faraday,tve200: Use a level-high interrupt
...
|
|
Document the scm compatible for msm8952 SoC.
Signed-off-by: Muzaffer Kadir <muzafferkadir@mainlining.org>
Link: https://patch.msgid.link/20260921-msm8952-initial-support-v3-11-b96fd3fe298b@mainlining.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
|
|
As per mailing-list discussions [1] [2] [3], we want to delete the
following old file from the device-tree bindings that live in the
Linux kernel git tree:
* Documentation/devicetree/bindings/mailbox/mailbox.txt
The old .txt file did have some descriptive text about what some of
the properties meant. Those have been added to the dt-schema
repository in a pull request [4].
Also remove dangling references to `mailbox.txt` across all remaining
device-tree binding documentation files.
Link: https://lore.kernel.org/r/20260722140214.GA548057-robh@kernel.org [1]
Link: https://lore.kernel.org/r/dc7a2041-50a4-482e-9930-566bb3fd1e72@kernel.org [2]
Link: https://lore.kernel.org/r/CAL_JsqKVjQ2m-dzMUENQry-f_YE9QrYSOKoH9CPj1gjj8XkPRA@mail.gmail.com [3]
Link: https://github.com/devicetree-org/dt-schema/pull/202 [4]
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260814124603.v2.1.I8b3ff71c528133e7d6f81fe926fa39e6451d63fd@changeid
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Document the SCM firmware interface found on the Qualcomm Kuno SoC.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Hardeep Sharma <hardeep.sharma@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260827-kuno-soc-support-v5-13-6d47636a8f09@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a DT maintainer profile document
- Various dt-check-style improvements
- Add a devres managed reserved memory region init function
- Print node name on any skipped reserved memory regions
- Correctly handle optional argument in
of_parse_phandle_with_args_map()
- Convert ti,keystone-reset, ti,da850-vpif, TI L4 interconnect, TI
SmartReflex, microchip,pic32mzda-dmt, microchip,pic32mzda-wdt, TI
DA8XX MSTPRI bus, and Xen VM bindings to DT schema format
- Add bindings for StarFive JHB100 plic, Allwinner A733 NMI controller,
MediaTek MT8173 GPU, QCom Shikra, Eliza, and Maili cpu-bwmon, and
QCom Shikra SCM firmware
- A couple of syntax fixes found using PoC Rust implementation of
dtschema tools
- Clean-ups for typos, brackets, incorrect "::" usages, and
white-space style
* tag 'devicetree-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible
dtc: dt-check-style: Simplify setting depth of DtsLine
dtc: dt-check-style: Add missing /dts-v1/ to few test cases
dt-bindings: power: reset: ti,keystone-reset: Convert to DT schema
media: dt-bindings: ti,da850-vpif: Convert to dt-schema
dt-bindings: devfreq: samsung,exynos-ppmu: Use standard regex syntax
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop invalid JSON pointer
dt-bindings: arm: omap: Convert L4 interconnect to DT schema
dt-bindings: power: Convert TI SmartReflex to DT schema
of: reserved_mem: Introduce devres-managed initialization function
dt-bindings: interrupt-controller: Add StarFive JHB100 plic
dt-bindings: irq: sun7i-nmi: Document the Allwinner A733 NMI controller
dt-bindings: Correct white-space style
dt-bindings: fix typos and brackets
docs: dt: submitting-patches: Mention expectation about dt-check-style
docs: dt: maintainer: Add Devicetree and OF maintainer profile document
docs: dt: writing-schema: Extend expectations about example part of binding
dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU
of: base: Handle optional argument in of_parse_phandle_with_args_map()
dt-bindings: update Sudeep Holla's email address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
The ZynqMP clock controller binding shares only #clock-cells with the
Versal bindings. Move it to a dedicated xlnx,zynqmp-clk.yaml schema.
Also remove "(Optional clock)" from clock description because it is visible
from schema itself.
Also update versal-firmware example to match changes in
xlnx,zynqmp-firmware.yaml.
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/973a8a5441cf13622594b95dd0dd20a5f42ccece.1783516336.git.michal.simek@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Document clock-controller under zynqmp-firmware in the binding example so
ZynqMP DTs validate against xlnx,versal-clk.yaml (Versal example already did).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/12dba601a8b631e565dd98e52a89b0ec18fcdce2.1783516336.git.michal.simek@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
MAINTAINERS disagrees with Documentation/devicetree/bindings on Sudeep's
email address; fix the latter.
Fixes: 59e82a4237cf ("MAINTAINERS: Change Sudeep Holla's email address")
Signed-off-by: Laszlo Ersek <laszlo.ersek@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260720160235.36592-1-laszlo.ersek@arm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Document the SCM compatible for the Shikra SoC.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260501-shikra-scm-binding-v1-1-93d7faf1b784@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
On Qualcomm SoCs that support minidump, a word in always-on SRAM
is shared between the Operating System(HLOS) and boot firmware.
OS is expected to select the minidump download destination
either USB upload to a host PC or save to on-device storage.
Boot firmware will reads this word before DDR is initialized
on the warm reset following a crash to decide where to deliver
the minidump.
Add a 'sram' property to the SCM binding to allow the OS to
identify this SRAM region via a phandle.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260624190830.3131112-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document SCM compatible for the Qualcomm Maili SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260604-maili-soc-binding-v2-1-21b5e9bd1aa5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document SCM compatible for the Qualcomm Hawi SoC.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260401123825.589452-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document SCM on Qualcomm Nord SoC which is compatible with 'qcom,scm'.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260427130800.271146-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v7.1
Add ECS LIVA QC710, Glymur CRD, Mahua CRD, Purwa IoT EVK, and Asus
Vivobook to the QSEECOM allow-list, to enable UEFI variable access
through uefisecapp.
Register the Gunyah watchdog device if the SCM driver finds itself
running under Gunyah. Clean up some locking using guards.
Handle possible cases where AOSS cooling state is given a non-boolean
state.
Replace LLCC per-slice activation bitmap with reference counting. Also
add SDM670 support.
Improve probe deferral handling in the OCMEM driver.
Add Milos, QCS615, Eliza, Glymur, and Mahua support to the pd-mapper.
Add support for SoCCP-based pmic-glink, as found in Glymur and
Kaanapali.
Add common QMI service ids to the main qmi headerfile, to avoid
spreading these constants in various drivers.
Add support for version 2 of SMP2P and implement the irqchip state
reading support.
Add CQ7790, SA8650P, SM7450, SM7450P, and IPQ5210 SoC and the PM7550BA
PMIC identifiers to the socinfo driver.
Add Eliza and Mahua support to the UBWC driver, introduce helpers for
drivers to read out min_acc length and other programmable values, and
disable bank swizzling for Glymur.
Simplify the logic related to allocation of NV download request in the
WCNSS control driver.
* tag 'qcom-drivers-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
dt-bindings: firmware: qcom,scm: Document ipq9650 SCM
soc: qcom: ubwc: Add support for Mahua
soc: qcom: pd-mapper: Add support for Glymur and Mahua
soc: qcom: ubwc: Add configuration Eliza SoC
soc: qcom: ubwc: Remove redundant x1e80100_data
dt-bindings: firmware: qcom,scm: document Eliza SCM Firmware Interface
soc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not available
soc: qcom: ocmem: register reasons for probe deferrals
soc: qcom: ocmem: make the core clock optional
soc: qcom: ubwc: disable bank swizzling for Glymur platform
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v7.1
This batch mainly improves SCMI robustness on systems where the SCP does
not generate completion interrupts, and includes two small follow-up
cleanups in the SCMI core.
The main functional change adds support for the new DT property
'arm,no-completion-irq'. When present for mailbox/shared-memory based
SCMI implementations, the driver forces SCMI operations into polling
mode so affected platforms can continue to operate even with broken
firmware interrupt behavior.
In addition, it
- replaces open-coded size rounding in the base protocol path with
round_up() for clarity, with no functional change
- updates the SCMI quirk snippet macro implementation so quirk handlers
can use break and continue directly when invoked inside loop contexts
* tag 'scmi-updates-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Support loop control in quirk code snippets
firmware: arm_scmi: Use round_up() for base protocol list size calculation
firmware: arm_scmi: Implement arm,no-completion-irq property
dt-bindings: firmware: arm,scmi: Document arm,no-completion-irq property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the scm compatible for ipq9650 SoC.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260325-ipq9650_scm-v1-1-ad6a3fe53f38@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the SCM Firmware Interface on the Eliza SoC.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311-eliza-bindings-scm-v2-1-b2d2e69068e3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the scm compatible for ipq5210 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260318-ipq5210_boot_to_shell-v2-4-a87e27c37070@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document new property arm,no-completion-irq . This optional property
is intended for hardware that does not generate completion interrupts
and can be used to unconditionally enable forced polling mode of
operation.
With this property set, such implementations which do not generate
interrupts can be interacted with, until they are fixed to generate
interrupts properly.
Note that, because the original base protocol exchange also requires
some sort of completion mechanism, it is not possible to query SCMI
itself for this property and it must be described in DT. While this
does look a bit like policy, the SCMI provider is part of the
hardware, hence DT.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20260117010241.186685-1-marek.vasut+renesas@mailbox.org>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used
as a sub-PMIC.
The interface for both is the ACPM firmware protocol, so update the
binding to allow the relevant node and update the example here to
describe the connection for both PMICs.
Since we have two PMICs here, but can not use the 'reg' property (as
the addressing is based on software, i.e. the ACPM firmware), the node
names reflect that with their respective suffix. The existing 'pmic'
therefore becomes deprecated in favour of 'pmic-1'.
While at it, update the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260210-s2mpg1x-regulators-v8-1-c429d709c0e0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
Merge series from André Draszik <andre.draszik@linaro.org>:
This series extends the existing S2MPG10 PMIC driver to add support for
the regulators, and adds new S2MPG11 core and regulator drivers.
The patches are kept together in one series, due to S2MPG11 and its
regulators being very similar to S2MPG10.
The Samsung S2MPG11 PMIC is a Power Management IC for mobile
applications with buck converters, various LDOs, power meters, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC and both are used on the
Google Pixel 6 and 6 Pro (oriole / raven).
A DT update for Oriole / Raven to enable these is required which I will
send out separately.
|
|
Using lowercase for the buck and ldo nodenames is preferred, as
evidenced e.g. in [1].
Convert the example here to lowercase before we add any bindings
describing the s2mpg1x regulators that will enforce the spelling.
Link: https://lore.kernel.org/all/20250223-mysterious-infrared-civet-e5bcbf@krzk-bin/ [1]
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-1-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SCU MU driver has already supported the simple and efficient single-TX
and single-RX channel layout since 2021. The older multi-channel MU
configurations (tx0..tx3 and rx0..rx3) are less efficient in practice and
not needed.
Mark these legacy mbox-names and mboxes tuple layouts as deprecated in the
binding schema. The driver continues to support them for backward
compatibility in case firmware publishes the legacy properties.
The example section is updated accordingly to demonstrate the recommended
layout.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260127-scu-v2-1-03f3aaa56e1b@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the CZ.NIC Turris Mox rWTM firmware binding to DT schema format.
Add the "marvell,armada-3700-rwtm-firmware" compatible which was not
documented.
Link: https://patch.msgid.link/20251215212545.3318816-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Updates the Device Tree bindings for Xilinx firmware by introducing
conditional schema references for the pinctrl node.
Previously, the pinctrl node directly referenced
xlnx,zynqmp-pinctrl.yaml. However, this patch modifies the schema to
conditionally apply the correct pinctrl schema based on the compatible
property. Specifically:
- If compatible contains "xlnx,zynqmp-pinctrl", reference
xlnx,zynqmp-pinctrl.yaml.
- If compatible contains "xlnx,versal-pinctrl", reference
xlnx,versal-pinctrl.yaml.
Additionally, an example entry for "xlnx,versal-pinctrl" has been
added under the examples section.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Link: https://patch.msgid.link/20251212100542.2756757-3-ronak.jain@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The absence of a compatible property caused dt_binding_check to skip
the zynqmp_firmware node.
To address this, add "xlnx,zynqmp-firmware" to the compatible property
in the example section for the zynqmp_firmware node.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251212100542.2756757-2-ronak.jain@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
zynqmp-aes-gcm updated to self discover, corresponding dt binding
can be mark deprecated.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.19
- Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5)
- Agilex5 updates:
- Add GMAC0 for NAND daughter card
- Add SMMU support
- Add VGIC maintenance interrupt
- Add L2 and L3 cache
- Add support for the 013b board
- Add I3C support
- Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5
- Add support for Agilex3 board(a variant of the Agilex5 board)
- dt-bindings update:
- Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5
- Document Enclustra Mercury SA1 and AA1 boards
- Document Agilex5 013b board
- Document Agilex3 board
- Fix dtbs_check warnings:
- stratix10-swvp
- Agilex(NAND and Clock manager)
- Move sdmmc-ecc to base DTSI file(Stratix10)
* tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (35 commits)
arm64: dts: socfpga: agilex5: update qspi partitions for 013b board
arm64: dts: socfpga: add Agilex3 board
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: intel: agilex5: Add Altera compatible for I3C controllers
arm64: dts: socfpga: Add Agilex5 SVC node with memory region
dt-bindings: firmware: svc: Add IOMMU support for Agilex5
arm64: dts: socfpga: agilex5: Add SMMU-V3-PMCG nodes
arm64: dts: socfpga: agilex5: Add L2 and L3 cache
arm64: dts: socfpga: agilex5: fix CHECK_DTBS warning for NAND
arm64: dts: socfpga: agilex5: add support for 013b board
dt-bindings: intel: Add Agilex5 SoCFPGA 013b board
arm64: dts: socfpga: agilex5: add VGIC maintenance interrupt
arm64: dts: socfpga: agilex: fix dtbs_check warning for NAND
arm64: dts: socfpga: agilex: fix dtbs_check warning for clock manager
arm64: dts: socfpga: stratix10-swvp: fix dtbs_check warnings swvp
arm64: dts: socfpga: move sdmmc-ecc to the base DTSI file
ARM: dts: socfpga: add Enclustra SoM dts files
dt-bindings: altera: removal of generic PE1 dts
ARM: dts: socfpga: removal of generic PE1 dts
dt-bindings: altera: add Mercury AA1 variants
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In Agilex5, the TBU (Translation Buffer Unit) can now operate in non-secure
mode, enabling Linux to utilize it through the IOMMU framework. This allows
improved memory management capabilities in non-secure environments. With
Agilex5 lifting this restriction, we are now extending the device tree
bindings to support IOMMU for the Agilex5 SVC.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Document SCM compatible for the Qualcomm Kaanapali SoC.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251102-knp-soc-binding-v3-2-11255ec4a535@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the SCM compatible for Qualcomm Glymur SoC.
Secure Channel Manager(SCM) is used to communicate
with secure firmware.
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250918141738.2524269-1-pankaj.patil@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The firmware exposes clocks that can be controlled via the
Alive Clock and Power Manager (ACPM) interface.
Make the ACPM node a clock provider by adding the mandatory
"#clock-cells" property, which allows devices to reference its
clock outputs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-1-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates/fixes for v6.18
These SCMI changes bring a mix of improvements, fixes, and cleanups:
1. Device Tree bindings - allow multiple SCMI instances by suffixing
node names (Nikunj Kela).
2. Code hardening - constify both scmi_{transport,voltage_proto}_ops
so they reside in read-only memory (Christophe JAILLET).
3. VirtIO transport initialization - set DRIVER_OK before SCMI probing
to prevent potential stalls; while recent rework removes the practical
risk, this ensures correctness (Junnan Wu).
4. Quirk handling - fix a critical bug by preventing writes to string
constants, avoiding faults in read-only memory (Johan Hovold).
5. i.MX SCMI MISC protocol - extend support to discover board info,
retrieve configuration and build data, and document the new
MISC_BOARD_INFO command; all handled gracefully if unsupported (Peng Fan).
6. Logging cleanup - simplify device tree node name logging by using
the %pOF format to print full paths (Krzysztof Kozlowski).
* tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Simplify printks with pOF format
firmware: arm_scmi: imx: Discover MISC board info from the system manager
firmware: arm_scmi: imx: Support retrieving MISC protocol configuration info
firmware: arm_scmi: imx: Discover MISC build info from the system manager
firmware: arm_scmi: imx: Add documentation for MISC_BOARD_INFO
firmware: arm_scmi: quirk: Prevent writes to string constants
firmware: arm_scmi: Fix function name typo in scmi_perf_proto_ops struct
firmware: arm_scmi: Mark VirtIO ready before registering scmi_virtio_driver
firmware: arm_scmi: Constify struct scmi_transport_ops
firmware: arm_scmi: Constify struct scmi_voltage_proto_ops
dt-bindings: firmware: arm,scmi: Allow multiple instances
Link: https://lore.kernel.org/r/20250915101341.2987516-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
BBM protocol supports a single power button, supported by driver
imx-sm-bbm-key.c. By default this is KEY_POWER, but can also be overwritten
using linux,code. Add a reference to this schema and add linux,code as a
supported property.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add compatible for MSM8937.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250903-msm8937-v9-3-a097c91c5801@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable multiple SCMI instances by appending an instance-number suffix
to the 'scmi' node name. The SCMI spec assumes a single SCMI platform,
but in practice its responsibilities may be split across several SCMI
platform/server instances. However, only one instance can serve as the
system-wide (true) SCMI platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Deepti Jaggi <quic_djaggi@quicinc.com>
Message-Id: <20250730-8255-scmi-v6-1-a7d8ba19aded@quicinc.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131456.247610-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250725100241.120106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.17
This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.
The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.
Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards
New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.
* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...
Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the SCM Firmware Interface on the Milos SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250713-sm7635-fp6-initial-v2-4-e8f9a789505b@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
