Merge branch 'pci/controller/dwc-qcom'

- Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing
  resets used by downstream devices like USB controllers (Christopher
  Obbard)

- Block accesses to downstream devices on link down to reduce a storm of
  Completion Timeout AER interrupts (Qiang Yu)

- Skip system suspend/resume for firmware-managed PCIe, where firmware
  manages clocks, regulators, resets, etc (Mrinmay Sarkar)

- Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
  (Manivannan Sadhasivam)

- Deinitialize endpoint on remove (Guangshuo Li)

- Treat Root Port error recovery as successful even if link doesn't come up
  after reset because the device was hot-unplugged (Konrad Dybcio)

- Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present,
  indicating an external MSI controller (Ayiluri Naga Rashmi)

* pci/controller/dwc-qcom:
  PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present
  PCI: qcom: Ignore -ENODEV after Root Port reset
  PCI: qcom-ep: Deinitialize endpoint on remove
  PCI: qcom: Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
  PCI: qcom: Skip system suspend/resume for firmware-managed PCIe
  PCI: qcom: Block accesses to downstream devices on link down
  PCI: qcom: Only check bridge nodes for PERST# GPIOs

0 files changed, 0 insertions, 0 deletions