| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
# Conflicts:
# mm/internal.h
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
|
|
# Conflicts:
# fs/coredump.c
# fs/f2fs/f2fs.h
# fs/fuse/dax.c
# fs/xfs/libxfs/xfs_btree.c
|
|
Waking up a thread per packet is expensive when an application
processes variable-length frames (e.g., RPC) that span multiple
packets.
SO_RCVLOWAT can defer wakeups, but because the frame size is
encoded in a fixed-size descriptor at the start of each frame,
the application has to:
1. wake up and recv() the descriptor,
2. raise SO_RCVLOWAT to the payload size via setsockopt(),
3. wake up and recv() the payload, and
4. reset SO_RCVLOWAT back to the descriptor size via
setsockopt() for the next frame.
This requires an extra wakeup and two setsockopt() syscalls
for every single RPC frame.
With SOCKMAP, we can parse skb and suppress wakeups in kernel,
but SOCKMAP adds overhead and also kills zerocopy.
Let's add lighter-weight opt-in callbacks to bpf_tcp_ops to
replace that.
.enqueue_rcvq(): invoked when TCP stack enqueues skb to
sk->sk_receive_queue
.dequeue_rcvq(): invoked in tcp_cleanup_rbuf() after data
is dequeued from sk->sk_receive_queue
Those callbacks can be enabled on a per-socket basis by
bpf_tcp_ops_set_flags():
bpf_tcp_ops_set_flags((struct tcp_sock *)sk,
BPF_TCP_OPS_FLAG_RCVQ, 0);
Later, we will add a new kfunc to adjust sk->sk_rcvlowat from
these callbacks.
This will allow the bpf_tcp_ops prog to parse each skb and
dynamically adjust sk->sk_rcvlowat to suppress unnecessary EPOLLIN
wakeups until sufficient data is available in the receive queue.
The placement of bpf_tcp_ops_call() in tcp_ofo_queue() and
tcp_fastopen_add_skb() is chosen to provide the same snapshot
as tcp_queue_rcv().
For example, if bpf_tcp_ops_call() were called before updating
TCP_SKB_CB(skb)->seq in tcp_fastopen_add_skb(), BPF prog would
need an extra branch for the unlikely TFO case to strip SYN.
In addition, the TCP stack can queue overlapping skbs into recvq.
Once rcv_nxt is updated with a new skb, BPF prog can no longer
infer the previous rcv_nxt from skb->len.
Lastly, dequeue_rcvq() is placed in tcp_cleanup_rbuf() rather
than __tcp_cleanup_rbuf() so that it is not called for sockets
in SOCKMAP, where calling sk->sk_data_ready() from the new
kfunc would otherwise trigger infinite recursion.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20261008031604.256498-7-kuniyu@google.com
|
|
The legacy SOCK_OPS guards some hooks with a per-socket flag,
tp->bpf_sock_ops_cb_flags.
In contrast, bpf_tcp_ops was initially designed without per-socket
flags so that users can simply define only the callbacks they need.
However, it turned out that even attaching a bpf_tcp_ops with a NULL
callback incurs measurable overhead in the fast path. [0]
We could reuse tp->bpf_sock_ops_cb_flags, but it is u8 and has only
1 bit left for a new opt-in callback, while not all of the 7 existing
opt-in hooks are in the fast path and really need a flag guard.
Moreover, tp->bpf_sock_ops_cb_flags has two bpf helper functions to
update it, both of which require sock_owned_by_me(sk):
* bpf_sock_ops_cb_flags_set()
* bpf_setsockopt(TCP_BPF_SOCK_OPS_CB_FLAGS)
Both helpers only overwrite the field, which leads to reading and
modifying the flags in the BPF prog and then writing them back
via the helper. This prevents use from the fast path (tc or
cgroup_skb) hooks where bh_lock_sock() alone cannot prevent races
with process context.
Let's add a new u32 field, tp->bpf_tcp_ops_flags, at the end of the
tcp_sock_read_txrx cacheline group, along with a new kfunc,
bpf_tcp_ops_set_flags().
bpf_tcp_ops_set_flags() takes bitmasks of flags to enable and
disable and updates tp->bpf_tcp_ops_flags atomically via
try_cmpxchg() without relying on lock_sock().
The kfunc is exposed to bpf_tcp_ops, BPF_PROG_TYPE_CGROUP_SOCKOPT,
and BPF_PROG_TYPE_CGROUP_SKB.
The first argument is struct tcp_sock * so that bpf_tcp_sock() etc
is required for cgroup hooks, but not for bpf_tcp_ops where struct
sock * is promoted to struct tcp_sock * automatically.
The fast-path callbacks will be guarded by the new flags in a later
patch after updating the existing selftest to avoid breaking bisection.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/netdev/CAMB2axMwBuz3X4Uwn5uzZUqm91EbiMnbQX832wUFOQ44fOwDnQ@mail.gmail.com/ #[0]
Link: https://patch.msgid.link/20261008031604.256498-3-kuniyu@google.com
|
|
Describe SECCOMP_FILTER_FLAG_RESTART_BEFORE_RECV in the UAPI header, as
SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV is described above it, and say in
the documentation that supervisors must tolerate ENOENT from
SECCOMP_IOCTL_NOTIF_RECV, which the flag makes routine. Note at the
fget_raw() call that O_PATH files are allowed on purpose.
Build tested ARCH=x86_64 defconfig (kernel/seccomp.o and headers) with
GCC 16.2.0, and SPHINXDIRS=userspace-api htmldocs.
Assisted-by: LLM
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
An interrupted user notification wait returns ERESTARTSYS before the
syscall body has run. If the notifying task's handler for the delivered
signal was installed without SA_RESTART, that task sees EINTR even for
calls whose callers do not expect it. This can make fork fail
unexpectedly or make close report EINTR while leaving the descriptor
open. A leaked pipe write end can prevent readers from seeing EOF.
The supervisor cannot repair this result once the interrupted task
removes the notification. If removal happens before receipt, the
supervisor never receives that request; a reply using its ID would fail
with ENOENT. Receiving notifications eagerly only narrows the scheduling
window. WAIT_KILLABLE_RECV protects supervisor processing after receipt,
but deliberately leaves the pre-receive wait interruptible.
A sandbox also cannot transparently fix this in the target. It cannot
require arbitrary workloads to retry calls such as fork and close.
Retrying close on EINTR is unsafe when the native syscall has already
released the descriptor. Forcing SA_RESTART on application handlers
would change cancellation behavior for other blocking calls.
Sandlock encounters this while mediating process creation to enforce
process limits. For example, dash installs its SIGCHLD handler without
SA_RESTART. While dash is creating a pipeline, an earlier child can exit
and generate SIGCHLD while dash waits for a fork notification to be
received. The interrupted wait then makes fork return EINTR, causing
dash to report "Cannot fork". Removing fork from notification mediation
would bypass the process-limit enforcement that sandlock needs.
Add SECCOMP_FILTER_FLAG_RESTART_BEFORE_RECV, requiring NEW_LISTENER.
Under notify_lock, convert an interrupted wait's ERESTARTSYS to
ERESTARTNOINTR only while the notification remains INIT. The notifying
task's signal handler still runs; if it returns normally, syscall entry
and the filter are evaluated again.
Keep this opt-in because commit c2aa2dfef243 ("seccomp: Add
wait_killable semantic to seccomp user notifier") deliberately preserved
pre-receipt interruption so workloads could abandon requests before the
supervisor starts processing them. The flag can be combined with
WAIT_KILLABLE_RECV to defer non-fatal signals after receipt. Neither
supervisor-supplied errors nor the native syscall's restart behavior is
changed.
Assisted-by: Codex:gpt-6
Signed-off-by: Cong Wang <cwang@multikernel.io>
Link: https://patch.msgid.link/20260924204209.477694-2-xiyou.wangcong@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
There are no address spaces in Rust. LLVM emits plain loads and stores
for arena memory, without cast_kern:
r3 = 0x20 ll // R_BPF_64_64 .bss, libbpf puts it into arena
r2 = *(u64 *)(r3 + 0) // R3 invalid mem access 'scalar'
lock *(u64 *)(r2 + 8) += r1
Add BPF_F_ARENA_SCALAR flag of BPF_PROG_LOAD. When the program is loaded
with it and has an arena treat ldx, stx, st and atomics through a number
as arena access. It's as safe as access through PTR_TO_ARENA: JIT adds
the base of arena to the low 32 bits of the address. The program has
an arena only with CAP_BPF and CAP_PERFMON.
Registers of the program are not changed, since Rust compares and
stores the address after the access. bpf_do_misc_fixups() copies
the low 32 bits into BPF_REG_AX and the access goes through it:
r2 = *(u64 *)(r3 + 0) -> w12 = w3
r2 = *(u64 *)(r12 + 0)
Constant blinding needs BPF_REG_AX for immediates and leaves insns that
use BPF_REG_AX alone. So the immediate of st through a number is not
blinded, the rest of the program is:
*(u64 *)(r3 + 0) = 1 -> w12 = w3
*(u64 *)(r12 + 0) = 1
The same insn may see PTR_TO_ARENA on another path. It works for both.
It's a flag, since a number is also what the verifier makes of a pointer
that went away when the program has CAP_PERFMON: a ringbuf record after
bpf_ringbuf_submit(), a pointer to the packet after bpf_skb_pull_data().
Programs in C that have an arena keep "invalid mem access 'scalar'" for
such bugs.
JIT tells with bpf_jit_supports_arena_scalar() that it takes BPF_REG_AX
as the address of arena access. With other JITs the flag is rejected
with -EOPNOTSUPP. x86 and arm64 do:
- x86: the fault handler finds the register that holds the address
through reg2pt_regs[]. Add BPF_REG_AX, r10 of x86, there.
- arm64: nothing else is needed. The JIT takes any register as the
address and the fault handler reads it by its number. Compile tested
only.
Any number is an address of arena, NULL and small numbers included, like
it is for PTR_TO_ARENA: arena code in C dereferences NULL and relies on
the fault being handled.
Still rejected:
- insn that sees a number on one path and a pointer that is not
PTR_TO_ARENA on another.
- numbers passed to helpers and kfuncs, except __arena arguments.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20261002124714.180012-4-alexei.starovoitov@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
The existing BPF_PROG_STREAM_READ_BY_FD command only supports polling a
program stream through repeated bpf() calls. It cannot block for new data
or integrate with poll-based event loops.
Add BPF_PROG_STREAM_OPEN to return a read-only, close-on-exec file
descriptor for a selected program stream. Reads block by default and
BPF_F_STREAM_NONBLOCK, the only accepted flag, provides non-blocking
behavior. poll reports readable data and reports hangup once the program
has been freed. Like pipes and sockets, the descriptor is not seekable and
lseek fails with ESPIPE.
A stream descriptor deliberately does not retain the program. Move each
stream into a separately refcounted allocation so program teardown can mark
it dead and wake descriptor users while outstanding descriptors drain
buffered data safely. Readers sample the dead flag before looking for data,
so EOF is reported only when the stream was already dead before it was
found empty; data published right before teardown is never skipped.
Only programs loaded through BPF_PROG_LOAD get streams. Classic BPF
filters, JIT subprograms and shim programs never write to one, and
kernel-side writers already resolve a subprogram to its main program, so
those programs no longer carry stream state.
Readiness needs its own counter. Stream capacity is charged before
allocation and before an element is published to the stream log, so using
that reservation as the read and poll condition can report readable data
while no element exists: a blocking reader retries instead of sleeping and
a lone non-blocking reader can see POLLIN followed by EAGAIN. Publish bytes
with release ordering after adding elements to the lockless log, use
acquire loads before consuming them or reporting readiness, limit each read
to its readable snapshot and subtract only bytes actually copied. This
keeps the aggregate count correct even when concurrent publishers update it
out of publication order. With several readers on one stream, readiness
remains advisory, as it is for pipes. The capacity counter is kept solely
for enforcing the stream size limit.
Wakeups are always deferred through irq_work. Stream writers run in
whatever context the program runs in: NMI context for perf_event programs,
sections with interrupts disabled inside bpf_spin_lock or rqspinlock
critical sections since bpf_stream_vprintk() is KF_SPINLOCK_SAFE, and
tracing programs attached anywhere in the kernel, including inside the wait
queue and epoll code itself. Waking waiters directly from there can
deadlock, and no cheap context check covers every case: on PREEMPT_RT,
spinlock_t sections do not disable interrupts, so in_nmi() or
irqs_disabled() cannot tell such a program apart from a benign one. Queue
an irq_work item instead, as bpf_ringbuf does.
Queue it only when a publication turns an empty stream readable. Readers
block and pollers wait only after finding the stream empty, and the
readable count never drops below zero because each read is bounded by its
snapshot, so the first publication after such an observation is the one
that makes the count positive, and it is the one that queues the wakeup.
Publications into a stream that already holds data raise no interrupt, so
a program that prints while nobody drains its stream pays for a single
irq_work until the stream is emptied again. This matches bpf_ringbuf, which
notifies only once the consumer has caught up. Blocking readers and
level-triggered pollers re-check the readable count before waiting, so they
cannot miss data, and edge-triggered epoll consumers drain until EAGAIN
before waiting again, as epoll(7) requires.
Synchronize pending work before releasing the final stream reference so
the callback cannot outlive the stream, but only when the work was ever
queued: irq_work_sync() waits for an RCU grace period on PREEMPT_RT and on
architectures without an irq_work interrupt.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260925045536.1480933-3-memxor@gmail.com
|
|
Add BTF_KIND_LOC_PARAM, BTF_KIND_LOC_PROTO and BTF_KIND_LOCSEC
to help represent location information for functions.
BTF_KIND_LOC_PARAM is used to represent how we retrieve data at a
location; either via register(s), or register+offset, a dereference
of a register+offset or a constant value.
BTF_KIND_LOC_PROTO represents location information about a location
with multiple BTF_KIND_LOC_PARAMs.
And finally BTF_KIND_LOCSEC is a set of location sites, each
of which has
- a BTF_KIND_FUNC function associated with the inline site
- a location prototype specifying where to find the function
parameters
- an address offset relative to the kernel base address
This can be used to support representing
- a fully-inlined function at potentially multiple inline sites
with potentially different parameter availability
- a partially-inlined function where some _LOC_PROTOs represent
inlined sites as above and others have normal _FUNC representations
Also BTF_KIND_LOCSEC struct btf_loc will have two type id
references; one for the associated func, the other for the loc_proto.
Accordingly increase the number of m_offs references in btf_field_desc
to 2.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260924111428.75957-2-alan.maguire@oracle.com
|
|
BPF programs that manage their own objects have no way to run their own
logic once an RCU grace period has elapsed. bpf_obj_drop() defers a
free, but returning an index to an allocator or unpinning a resource
once readers are done has no equivalent. sched_ext's BPF library works
around this today by pushing freed nodes onto a list and having a
userspace thread call membarrier(MEMBARRIER_CMD_GLOBAL) and then run a
BPF program to reclaim them.
Add:
int bpf_call_rcu(struct bpf_rcu_head *rh, void *map,
int (*callback)(struct bpf_map *map, void *key,
void *value));
@rh is a struct bpf_rcu_head embedded in a value of @map, so the
callback runs as callback(map, key, value) for the element it lives in
and needs no cookie. A head can only be armed once, which bounds
outstanding work by the number of elements.
struct bpf_rcu_head holds the callback state inline rather than a
pointer to it, as bpf_timer, bpf_wq and bpf_task_work do, because there
is nothing to cancel and so nothing that has to outlive the map value.
That avoids an allocation and a state machine on the arming path at the
cost of 48 bytes per element.
An RCU callback cannot be cancelled, so everything it touches has to
stay alive until it runs:
- The callback is the program's text, so arming takes a program
reference as bpf_timer, bpf_wq and bpf_task_work do, dropped once
the callback returns. bpf_prog_inc_not_zero() also fails the arm
with -EBADF once the program is dying.
- The map is held by that reference through used_maps. An inner map
is not, so bpf_rcu_head is rejected in one.
- The field is only accepted in BPF_MAP_TYPE_ARRAY, whose elements
are never freed individually. A hash element can be deleted and
recycled while a callback is queued on it.
- The head is disarmed before the callback runs so it can be armed
again from there, which takes a new program reference before the
running callback drops its own. Arming therefore fails with -EPERM
once the map is held by neither a process nor bpffs.
bpf_iter hands a program a writable pointer to the live element, which
would let it overwrite a queued head, so bpf_iter_attach_map() rejects
maps carrying one.
The callback is verified non-sleepable even when the caller is
sleepable, and RCU invokes it with BH disabled.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260922200208.3203834-2-puranjay@kernel.org
|
|
Sync the headers for the selftests.
Link: https://patch.msgid.link/20260821-work-coredump-filter-v1-2-91f9a73ef03e@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Sync the headers for the selftests.
Link: https://patch.msgid.link/20260820-work-coredump-sparse-v2-15-ba32dd718c51@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add the TCP header option callbacks to the bpf_tcp_ops struct_ops type:
parse_hdr - parse the options of an incoming skb on an established
connection
hdr_opt_len - reserve space in the TCP header for bpf options
write_hdr_opt - write the reserved bpf options
These mirror the BPF_SOCK_OPS_PARSE_HDR_OPT_CB, _HDR_OPT_LEN_CB and
_WRITE_HDR_OPT_CB legacy sockops callbacks, but are exposed as struct_ops
members so a program can implement them with normal function signatures
and per-member helper sets.
The reserved header window is shared between the legacy sockops and
bpf_tcp_ops paths. tcp_{syn,synack,established}_options() first run the
legacy BPF_SOCK_OPS_HDR_OPT_LEN_CB and then call hdr_opt_len, so both
sources accumulate into opts->bpf_opt_len; at write time the legacy
options are emitted first and bpf_tcp_ops writes after them.
API design
bpf_tcp_ops overloads the sock_ops header-option helpers rather than
introducing a new API: bpf_reserve_hdr_opt(), bpf_store_hdr_opt() and
bpf_load_hdr_opt() are exposed per-member (reserve for hdr_opt_len,
store/load for write_hdr_opt, load for parse_hdr) and share the existing
kernel option-walking core via _bpf_sock_ops{store,load}hdr_opt(), with
the bpf_tcp_ops wrappers synthesizing a temporary bpf_sock_ops_kern from
the program ctx. This keeps a port from the legacy
BPF_SOCK_OPS*_HDR_OPT_CB callbacks mechanical (same helper calls) and
adds no new UAPI helper/kfunc surface.
An alternative considered was to drop the option helpers entirely: have
hdr_opt_len reserve space purely through its return value, and introduce
a dedicated TCP-header-option dynptr used for both reading and writing.
That is a cleaner, more self-contained interface, but it is a larger
change and does not reuse the legacy helpers, making a port from sockops
less mechanical. It can be pursued as a follow-up; the helper-based
interface here keeps this series focused on moving the hooks to
struct_ops.
The hdr_opt_len fast path in tcp_established_options() is gated by
cgroup_bpf_enabled(CGROUP_TCP_SOCK_OPS). Note this is a global,
per-attach-type static branch: it is enabled whenever any bpf_tcp_ops is
attached, even one that does not implement hdr_opt_len or that is attached
to a different cgroup. In those cases the block still runs but
bpf_tcp_ops_hdr_opt_len() no-ops via the per-member check in the dispatch
macro. A per-member/per-cgroup gate could be added later if the extra
fast-path work proves measurable.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://patch.msgid.link/20260917200542.3689605-13-ameryhung@gmail.com
|
|
This patch adds necessary infrastructure to attach a struct_ops
map to a cgroup. The initial need was to support migrating
the legacy BPF_PROG_TYPE_SOCK_OPS to a struct_ops.
Recently, there are other struct_ops use cases that
need to attach struct_ops to a cgroup. For example,
the recent BPF OOM and memcg discussion in LSFMMBPF 2026.
The motivation is to create a consistent expectation
for attaching struct_ops to cgroup instead of each subsystem
creating its own infrastructure. This logic includes
hierarchy expectation, ordering expectation,
attachment API, and rcu gp.
There is already an existing implementation for attaching
multiple bpf progs to a cgroup. There are also tools
built around it for querying. Attaching a struct_ops map
(which is a group of bpf programs) could also adhere to
a similar API and potentially reuse most of the existing
implementation.
A couple of ideas have been tried. One of them
is to use mprog.c. In terms of the amount of changes,
I eventually came to the same conclusion as in
commit 120933984460 ("bpf: Implement mprog API on top of existing cgroup progs").
I then shifted the focus to reusing the current
{update,compute,activate,purge}_effective_progs() which has
the main logic that implements the mprog API.
Since then, I tried to add a 'struct cgroup *cgroup' member
to the existing 'struct bpf_struct_ops_link' and link_create
will create a 'struct bpf_struct_ops_link' object to be stored
in the pl->link. This turns out to have more changes on
both cgroup.c and bpf_struct_ops.c than I like.
This patch directly reuses the 'struct bpf_cgroup_link' which
cgroup.c already understands. Add 'struct bpf_map *map'
to 'struct bpf_cgroup_link'. In the future, as more subsystems
are extended by struct_ops, we may consider to make
'struct bpf_map *map' as a primary citizen of a link
like 'struct bpf_prog *prog' and directly add
'struct bpf_map *map' to the generic 'struct bpf_link'.
The pl->link could be the traditional 'prog' link or the
new 'map' link. The places that need to handle them differently
have already been refactored into the new prog_list_*() added in
the earlier patch. In those new prog_list_*(), this patch will
check "pl->link && pl->link->map", learn that it is a 'map' link
and handle it correctly.
The bpf_prog_array also needs to handle that its item can store
the traditional 'prog' or it can store a struct_ops map.
The places that need to handle them differently have also
been refactored into the new bpf_cgroup_array_*() added
in the earlier patch. The two differences are:
- different sentinel (dummy_bpf_prog in prog vs cfi_stub in struct_ops)
- the array for struct_ops may need to go through different
rcu gp.
The bpf_cgroup_array_*() functions use the cgroup_bpf_attach_type (ie atype)
to distinguish the array is storing prog or storing struct_ops map.
This patch also implements a separate struct bpf_link_ops
"cgroup_struct_ops_link_ops" to have a separate link_ops implementation
that only handles the cgroup's struct_ops link.
Questions:
- Although this patch did not change it, it is not obvious to me how
the replace_effective_progs() and purge_effective_progs() handle
cases when there are existing BPF_F_PREORDER progs attached
in the hlist.
Misc notes:
- CGROUP_TCP_SOCK_OPS is added to the 'enum cgroup_bpf_attach_type'.
The actual implementation of the tcp_bpf_ops (a struct_ops)
will be added in the next patch.
- free_after_mult_rcu_gp is added to 'struct bpf_struct_ops' such that
the bpf_prog_array can have a mix of sleepable and
non-sleepable prog in a struct_ops. This can tell
how the bpf_prog_array should be freed.
- For a struct_ops that supports cgroup attachment, it does not need to
implement its own reg/unreg function. reg/unreg to a cgroup is
done by the common infrastructure added in this patch.
- The cgroup's struct_ops link only supports BPF_F_ALLOW_MULTI.
This is enforced internally in cgroup_bpf_struct_ops_attach.
This should be consistent with the current prog's link
behavior in cgroup_bpf_link_attach.
In the future, we may allow each subsystem to choose differently.
- A cgroup_atype member is added to 'struct bpf_struct_ops'.
When a subsystem struct_ops needs to support cgroup attachment,
it needs to add a value to 'enum cgroup_bpf_attach_type'
and then assign it to the newly added cgroup_atype member
in the bpf_struct_ops.
- During LINK_CREATE in syscall, the patch uses the same
BPF_STRUCT_OPS (in attr->link_create.attach_type).
The bpf_struct_ops_link_create learns the map and
from the map it learns the st_ops. If the st_ops->cgroup_atype
is not 0, it will create a cgroup's link.
- When a subsystem registers a struct_ops that supports cgroup
attachment, the struct_ops infrastructure will also ask the
cgroup infrastructure to remember a few things. This is done
by calling cgroup_bpf_struct_ops_register().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260917200542.3689605-10-ameryhung@gmail.com
|
|
Minor touch ups to the XSK-related doc strings in the netdev spec.
Tx checksum is (obviously?) Layer 4 (TCP/UDP), not Layer 3 (IP).
The xdp_zc_max_segs change is more subtle, I guess, but to kernel devs
saying "frags" may sound like the number of skb frags. The value includes
the head in this case. The default of 1 means single buffer, XDP_USE_SG
sockets are refused when it is 1. Let's use the word "buffer" instead
of "frag".
Link: https://patch.msgid.link/20260916021608.1702731-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sync the UAPI header changes of supporting SIMD/eGPRs/SSP sampling into
corresponding tools UAPI headers.
Additionally, support the new introduced perf_event_attr fields in the
perf_event_attr__fprintf and perf_event__attr_swap() helpers, and add
sanity check for the new introduced __reserved_4 field in
perf_attr_check().
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
|
|
Add explicit padding before launch_time so xsk_tx_metadata has the same
layout on 32-bit and 64-bit systems.
On several architectures (csky, i386, nios2, m65k, openrisc, sh), the old
native 32-bit layout put launch_time at offset 12 and had a natural size of
20 bytes. Using sizeof(struct xsk_tx_metadata) as tx_metadata_len was already
rejected because the length must be a multiple of eight, so the
straightforward use of the interface was broken on those ABIs. Userspace
could still register a padded length of 24 bytes, though; mixing the old and
new layouts then silently reads launch_time from the wrong offset and
misprograms packet launch times. This intentionally replaces that
incompatible layout because the affected architectures are unlikely to
have any notable users. (x86_64 and arm64 have the most users and are _not_
affected)
Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260819160535.1472459-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
|
|
Pull fscrypt updates from Eric Biggers:
"The main change this cycle is a significant simplification that's been
overdue for a while now: standardizing on a single file contents
encryption implementation in ext4 and f2fs, instead of having two.
Specifically, the original filesystem-layer file contents encryption
implementation is removed, and the blk-crypto implementation is now
used unconditionally. blk-crypto delegates either to inline crypto
hardware or to the CPU via blk-crypto-fallback. The latter is
functionally equivalent to the original filesystem-layer code.
The blk-crypto implementation already existed, but previously it was
used only when the filesystem was mounted with "-o inlinecrypt". Now,
"-o inlinecrypt" just selects whether inline crypto hardware is used.
To allow maintaining that user control over hardware use, the
blk-crypto API is extended with a new flag BLK_CRYPTO_CFG_ALLOW_HW.
Overall, this removes quite a bit of redundant code from ext4, f2fs,
and fs/crypto/. It should make things easier for ongoing filesystem
efforts such as iomap support, large folios, and btrfs encryption
(btrfs had already been planning to use blk-crypto exclusively.)
There are two small behavior changes of note:
- Direct I/O now works on encrypted files even without "-o inlinecrypt",
rather than falling back to buffered I/O. This is effectively a
bugfix, though I'll continue to keep an eye out for any user that
may have been depending on the buffered I/O fallback.
- IV_INO_LBLK_32 policies are no longer supported in certain cases
that didn't make sense and have no known uses.
This has been in linux-next since July 22 with no reported issues. All
encryption xfstests pass on ext4 and f2fs. As usual I've also been
using it on a system with an fscrypt-encrypted home directory. Of
course, the blk-crypto code paths also aren't new and were already
being used on many systems via the inlinecrypt mount option.
In addition to the main change described above, there are a few other
cleanups such as using lock guards for mutexes, improving
documentation, and removing a workaround for outdated gcc versions"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: (29 commits)
blk-crypto: Update docs for blk-crypto-fallback motivation
blk-crypto: Remove unused function blk_crypto_config_supported()
fscrypt: Update docs for data path
fscrypt: Remove unused function fscrypt_finalize_bounce_page()
f2fs: Update outdated comment in f2fs_write_begin()
fs: Update outdated comment for SB_INLINECRYPT
fscrypt: Update encryption policy version docs
fscrypt: Replace some variable-size memsets with fixed-size
fscrypt: Add safety checks to non-block-based en/decryption
fscrypt: Merge bio.c and inline_crypt.c into block.c
fscrypt: Remove unused functions and workqueue
fscrypt: Remove fs-layer zeroout code
fscrypt: Remove fscrypt_dio_supported()
fscrypt: Replace calls to fscrypt_inode_uses_inline_crypto()
fs/buffer: Remove fs-layer decryption code
f2fs: Remove fs-layer file contents en/decryption code
ext4: Further de-generalize the bio postprocessing code
ext4: Make ext4_bio_write_folio() return void
ext4: Remove fs-layer file contents en/decryption code
Documentation: fscrypt: Update docs for inlinecrypt
...
|
|
Add new bpf_skb_adjust_room() decapsulation flags:
- BPF_F_ADJ_ROOM_DECAP_L4_GRE
- BPF_F_ADJ_ROOM_DECAP_L4_UDP
- BPF_F_ADJ_ROOM_DECAP_IPXIP4
- BPF_F_ADJ_ROOM_DECAP_IPXIP6
These flags let BPF programs describe which tunnel layer is being
removed, so later changes can update tunnel-related GSO state
accordingly during decapsulation.
This patch only introduces the UAPI flag definitions and helper
documentation.
Co-developed-by: Max Tottenham <mtottenh@akamai.com>
Co-developed-by: Anna Glasgall <aglasgal@akamai.com>
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Signed-off-by: Anna Glasgall <aglasgal@akamai.com>
Signed-off-by: Nick Hudson <nhudson@akamai.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20260812083115.73100-4-nhudson@akamai.com
|
|
The existing anonymous enum for BPF_FUNC_skb_adjust_room flags is
named to enum bpf_adj_room_flags to enable CO-RE (Compile Once -
Run Everywhere) lookups in BPF programs.
Co-developed-by: Max Tottenham <mtottenh@akamai.com>
Co-developed-by: Anna Glasgall <aglasgal@akamai.com>
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Signed-off-by: Anna Glasgall <aglasgal@akamai.com>
Signed-off-by: Nick Hudson <nhudson@akamai.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/20260812083115.73100-2-nhudson@akamai.com
|
|
Every devmem dmabuf binding today hands the page_pool PAGE_SIZE niovs.
This caps a single RX descriptor at PAGE_SIZE, burning CPU on buffer
churn for large flows.
Add a bind-time netlink attribute, NETDEV_A_DMABUF_RX_PAGE_SIZE, that
lets userspace request a larger niov size. The value must be a power of
two >= PAGE_SIZE.
The TX path is changed to always pass PAGE_SIZE.
Measurements:
Setup: kperf in devmem RX/TX cuda mode, 4 flows, 64 MB messages, 60s,
dctcp, num-rx-queues=4, dmabuf-rx/tx-size-mb=2048, 10 runs per niov
size, mlx5.
CPU Util:
niov net sirq % net idle % app sys % app idle %
----- ---------------- ---------------- ---------------- ----------------
4K 62.38 +/- 8.27 33.40 +/- 7.51 54.15 +/- 10.23 43.67 +/- 10.53
16K 58.91 +/- 5.35 35.23 +/- 5.88 41.05 +/- 8.87 56.42 +/- 9.24
32K 64.12 +/- 0.68 31.09 +/- 1.48 44.54 +/- 3.51 52.63 +/- 3.65
64K 54.69 +/- 5.54 39.67 +/- 5.81 35.47 +/- 3.11 61.97 +/- 3.27
RX app sys % drops ~19% from 4K to 64K.
Throughput:
niov RX dev Gbps RX flow avg Gbps
----- ---------------- -----------------
4K 300.63 +/- 53.21 75.16 +/- 13.30
16K 321.35 +/- 28.20 80.34 +/- 7.05
32K 347.63 +/- 2.20 86.91 +/- 0.55
64K 332.11 +/- 14.26 83.03 +/- 3.56
Throughput seems to increase, but the stdev is pretty wide so could just
be noise.
kperf support (not yet merged):
https://github.com/facebookexperimental/kperf/commit/8837577f920876bce6986ec18869ac04439ebcd2
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260805-tcpdm-large-niovs-v8-1-3e0225e2808c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the IFF_BACKPRESSURE flag to the UAPI header and to its tools/ copy.
The flag has no effect yet, it is the opt-in switch for the qdisc
backpressure logic added by the following patches.
It is added to TUN_FEATURES only in the last patch of the series, once the
implementation is complete. Until then TUNSETIFF silently masks it off, as
it does for any flag outside TUN_FEATURES.
Keeping the flag and its users in separate patches would either leave a
window where backpressure is unconditional, or make the opt-in a later
add-on. Adding the flag first lets every following patch be a no-op
unless it is set.
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20260803183641.96882-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Coverage for UFFDIO_REGISTER_MODE_RWP and UFFDIO_RWPROTECT:
rwp-async async mode — touch pages, verify permissions are
auto-restored without a message
rwp-sync sync mode — access blocks, handler resolves via
UFFDIO_RWPROTECT
rwp-pagemap PAGEMAP_SCAN reports still-cold pages via
inverted PAGE_IS_ACCESSED
rwp-mprotect RWP survives mprotect(PROT_NONE) ->
mprotect(PROT_READ|PROT_WRITE) round-trip
rwp-gup GUP walks through a protnone RWP PTE (pipe
write/read drives the GUP path)
rwp-async-toggle UFFDIO_SET_MODE flips between sync and async
without re-registering
rwp-close closing the uffd restores page permissions
rwp-fork RWP survives fork() with EVENT_FORK; child's
PTEs keep the uffd bit
rwp-fork-pin RWP survives fork() on an RO-longterm-pinned
anon page (forces copy_present_page()); child
read auto-resolves and clears the bit, proving
PAGE_NONE was in place
rwp-wp-exclusive register with MODE_WP|MODE_RWP returns -EINVAL
All tests run against anon, shmem, shmem-private, hugetlb, and
hugetlb-private memory, except rwp-fork-pin which is anon-only —
copy_present_page() is the private-anon pinned-exclusive fork path.
Snapshot the RWP additions into tools/include/uapi/linux/userfaultfd.h so
the selftest builds without requiring "make headers" first, matching the
mechanism established by commit 580ea358af0a ("selftests/mm: fix
additional build errors for selftests").
Link: https://lore.kernel.org/ak-Z9KO2mP9HMOPW@thinkstation
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: James Houghton <jthoughton@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PAGEMAP_SCAN already reports PAGE_IS_WRITTEN from the inverted uffd PTE
bit, targeting the UFFDIO_WRITEPROTECT workflow. UFFDIO_RWPROTECT reuses
the same PTE bit as a marker for read-write protection, but "has been
written" and "has been accessed" are distinct semantic signals — they
happen to share one PTE bit today only because the two implementations
share infrastructure.
Give RWP its own pagemap category so the UAPI does not conflate them:
PAGE_IS_WRITTEN reported on VM_UFFD_WP VMAs, !pte_uffd(pte)
PAGE_IS_ACCESSED reported on VM_UFFD_RWP VMAs, !pte_uffd(pte)
Both still read the same PTE bit today, but each is scoped to the VMA
whose registered mode makes the bit meaningful. If a future
implementation moves RWP to a separate PTE bit, only PAGE_IS_ACCESSED
switches over.
This is a UAPI narrowing. Outside VM_UFFD_WP VMAs the uffd bit is always
clear, so PAGEMAP_SCAN used to flag PAGE_IS_WRITTEN on every present PTE
there — a meaningless duplicate of PAGE_IS_PRESENT. Now PAGE_IS_WRITTEN
fires only inside VM_UFFD_WP VMAs.
pagemap_hugetlb_category() now takes the vma like its PTE/PMD peers.
Link: https://lore.kernel.org/20260708111417.173443-12-kirill@shutemov.name
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Assisted-by: Claude:claude-opus-4-6
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: James Houghton <jthoughton@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To pick up the changes in:
103ff3a50e3a50a9 ("KVM: s390: Add capability to support 2G hugepages")
229132c309d667bb ("LoongArch: KVM: Add DMSINTC device support")
2619da73bb2f10d8 ("KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs")
4aebd7d5c72f805e ("KVM: s390: Add KVM capability for ESA mode guests")
4f256d5770febb9d ("KVM: x86: nSVM: Save/restore gPAT with KVM_{GET,SET}_NESTED_STATE")
822790ab01495d67 ("KVM: x86: Define KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT")
8800dbf6614aad10 ("KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled")
bf8f3cec939db68e ("KVM: s390: vsie: Refactor handle_stfle")
c547c51ff4d44c78 ("KVM: arm64: gic-v5: Add ARM_VGIC_V5 device to KVM headers")
d7507a94a0720223 ("KVM: SVM: Treat exit_code as an unsigned 64-bit value through all of KVM")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
b588019e85f49069 ("rtnetlink: add RTEXT_FILTER_NAME_ONLY support")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/rtnetlink.h include/uapi/linux/rtnetlink.h
Please see tools/include/uapi/README for further details.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
de9e2b3d88af3641 ("uapi: Provide DIV_ROUND_CLOSEST()")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h
Please see tools/include/uapi/README for further details.
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that the arrays of per-mode keys in struct fscrypt_master_key have
been replaced by a linked list, the definition of FSCRYPT_MODE_MAX
doesn't do anything useful. (Previously it was used to size these
arrays.) Remove it.
Link: https://patch.msgid.link/20260618231404.132829-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
BPF_RB_OVERWRITE_POS is supported by bpf_ringbuf_query() but was missing
from the helper documentation. Add it to the flags list in both the
kernel UAPI header and its tools/ mirror.
Signed-off-by: Jianlin Shi <shijianlin11@foxmail.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/bpf/tencent_22134645443B75ED907D2A85A47AD554A709@qq.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
BPF_FIB_LOOKUP_VLAN resolves a VLAN egress. The reverse is also
useful: an XDP program receiving a VLAN-tagged frame on a physical
device wants the lookup to behave as if the packet had arrived on the
corresponding VLAN subinterface, so iif-based policy routing and VRF
table selection use the right ingress.
Add BPF_FIB_LOOKUP_VLAN_INPUT. When set, params->h_vlan_proto and
params->h_vlan_TCI are read as an input VLAN tag and the matching VLAN
device of params->ifindex is resolved with __vlan_find_dev_deep_rcu().
The device must be up and in the same network namespace as
params->ifindex (a VLAN device can be moved to another netns while
registered on its parent; receive would deliver into that other
namespace, which a lookup here cannot represent). If params->ifindex
is itself a VLAN device, its inner (QinQ) subinterface is matched.
For a bond or team, a tag on a port matches no device and returns
NOT_FWDED; pass the master's ifindex.
The lookup then runs with the resolved device as the ingress;
params->ifindex itself is not modified on the input side. When the
resolved device is enslaved to a VRF, both the full lookup (via the
l3mdev rule) and BPF_FIB_LOOKUP_DIRECT (via l3mdev_fib_table_rcu())
select the VRF's table from the resolved ingress. That follows from
feeding the resolved device to the flow as the ingress
(fl4.flowi4_iif = dev->ifindex), which is what makes l3mdev resolve
the VRF master from the subinterface rather than from
params->ifindex.
The two failure classes get different treatment on purpose. A
h_vlan_proto other than 802.1Q/802.1ad is API misuse and returns
-EINVAL, since it would otherwise reach the WARN in vlan_proto_idx()
with a program-controlled value. An unmatched VID, a device that is
down, or one in another namespace is a data outcome and returns
BPF_FIB_LKUP_RET_NOT_FWDED, matching the DIRECT path when
fib_get_table() finds no table and mirroring real ingress, where the
receive path drops such frames. A VID of 0 (a priority tag) is looked
up literally and normally fails the same way; receive instead
processes such frames untagged, so callers should not set the flag for
priority tags. Proceeding on the physical device for any of these
would be fail-open for the policy-routing cases above.
The h_vlan fields share a union with tbid, so the flag cannot be
combined with BPF_FIB_LOOKUP_TBID. It describes ingress, so it also
cannot be combined with BPF_FIB_LOOKUP_OUTPUT. Both combinations
return -EINVAL; restricting now keeps a later relaxation backward
compatible. Combining with BPF_FIB_LOOKUP_VLAN is allowed: the tag is
consumed on the ingress side and the egress tag is written on
success.
Under !CONFIG_VLAN_8021Q the __vlan_find_dev_deep_rcu() stub returns
NULL, so every lookup with a valid proto returns NOT_FWDED, which is
correct since no VLAN device can exist.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260713162305.1237211-3-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
bpf_fib_lookup() returns the FIB-resolved egress ifindex straight
from the fib result. When the egress is a VLAN device, the returned
ifindex is the VLAN netdev's, which has no XDP xmit handler; XDP
programs that want to forward the frame (e.g. xdp-forward) must
instead target the underlying physical device and push the VLAN tag
themselves. Today the program has no way to learn either the
underlying ifindex or the VLAN tag without maintaining its own
VLAN-to-ifindex map in userspace and refreshing it on netlink
events.
Add BPF_FIB_LOOKUP_VLAN. When the caller sets this flag and the fib
result is a VLAN device whose immediate parent is a real (non-VLAN)
device in the same network namespace, populate the existing output
fields params->h_vlan_proto and params->h_vlan_TCI from the VLAN
device and replace params->ifindex with the parent's ifindex.
params->h_vlan_TCI carries the VID only, with PCP and DEI bits zero; a
consumer wanting to set egress priority writes PCP itself.
params->smac is the VLAN device's own address, which can differ from
the parent's.
Only the immediate parent is resolved, via vlan_dev_priv(dev)->real_dev
and not vlan_dev_real_dev(), which walks to the bottom of a stack. When
the immediate parent is not a real device in the same namespace, the
lookup returns BPF_FIB_LKUP_RET_VLAN_FAILURE and leaves params->ifindex
at the input. This covers a stacked VLAN (QinQ), where the immediate
parent is itself a VLAN device and one h_vlan_proto/h_vlan_TCI pair
cannot describe two tags, and a parent in another network namespace (a
VLAN device can be moved while its parent stays), whose ifindex would
be meaningless in the caller's namespace. A program that wants the
VLAN device's own ifindex re-issues the lookup, with a re-initialized
params, without BPF_FIB_LOOKUP_VLAN, so the unreducible case stays
distinct from a physical egress. That distinction matters for XDP: a
program cannot xmit on a VLAN device, so a success carrying the VLAN
ifindex would make it redirect to a device with no ndo_xdp_xmit and
drop the frame at xdp_do_flush(). The swap and the vlan fields are
written only on the reduce path; other output fields keep their
existing behaviour, so a frag-needed result still reports the route
mtu in params->mtu_result.
BPF_FIB_LOOKUP_VLAN is only useful to XDP, which cannot redirect to a
VLAN device. A tc program can redirect to the VLAN device directly, so
bpf_skb_fib_lookup() rejects the flag with -EINVAL; bpf_xdp_fib_lookup()
accepts it. When the flag is not set, behaviour is unchanged:
h_vlan_proto and h_vlan_TCI are zeroed and ifindex is left at the FIB
result.
The new block is compiled only under CONFIG_VLAN_8021Q since
vlan_dev_priv() is not defined otherwise; without that config
is_vlan_dev() is constant false and the flag is accepted but never
acts. That is safe because no VLAN device can exist there, so every
egress is already physical.
This lets an XDP redirect target the physical device and learn the
tag to push in a single lookup, which xdp-forward's optional VLAN
mode (xdp-project/xdp-tools#504) wants from the kernel side.
The helper's input semantics are unchanged; the reverse direction
(supplying a tag as lookup input) is added in the following patch.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20260713162305.1237211-2-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Adding BPF_OBJ_GET_INFO_BY_FD support for tracing_multi links.
We expose following tracing_multi link data:
- attach_type of the program
- number of ids
- array of BTF ids
- array of its related kernel addresses
- array of cookies
The change follows the kprobe_multi and uprobe_multi link-info convention
of optional output arrays with an in/out count,
On top of standard tracing link data we also expose addresses, because they
are useful info for user (especially when the attachment was done via pattern).
This data is hidden when kallsyms does not allow exposing kernel pointer values.
Assisted-by: Codex:GPT-5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260629212208.895962-2-jolsa@kernel.org
|
|
We have several use cases where a pod injects traffic into the datapath
of another so that the traffic appears to have originated from that
pod. One such use case is a synthetic flow generator which injects
synthetic traffic into a pod's datapath to enable dynamic probing and
debugging. Another is a transparent proxy where connections originating
from one pod are redirected towards another which proxies that
connection. The new connection is bound to the IP of the original pod
using IP_TRANSPARENT and its traffic is injected into that pod's
datapath and handled as if it had originated there. This can be used for
mTLS, etc.
We use bpf_redirect(BPF_F_INGRESS) to direct traffic leaving the proxy,
flow generator, etc. towards the target pod, ensuring that eBPF programs
that are meant to intercept traffic leaving that pod are executed.
However, this doesn't work with netkit.
With netkit, an ingress redirection from proxy to workload skips eBPF
programs that are meant to intercept traffic leaving the pod, since they
reside on the netkit peer device. One workaround is to attach the
same program to both the netkit peer device and the TCX ingress hook for
the netkit pair's primary interface, but
a) This seems hacky and we need to be careful not to run the same
program twice for the same skb in cases where we want to pass that
traffic to the host stack.
b) We're trying to keep the proxy redirection / traffic injection
systems as modular and separated from Cilium as possible, the system
that manages netkit setup and core eBPF programming.
It would be handy if instead we could redirect traffic directly from
one netkit peer device to another. This patch proposes an extension
to bpf_redirect_peer to allow us to do just that.
With this patch, the BPF_F_EGRESS flag tells bpf_redirect_peer to emit
the skb in the egress direction of the target interface's peer device
While the main use case is netkit, I suppose you could also use this
mode with veth as well if, e.g., there were some eBPF programs attached
to that side of the veth pair that needed to intercept traffic.
+---------------------------------------------------------------------+
| +-------------------------+ 6. bpf_redirect_neigh(eth0) |
| | pod (10.244.0.10) | ------------------------ |
| | | | | |
| | +--------+ | | +---------+ | |
| | 1. packet -->| | | | | | | |
| | leaves ^ | netkit |<===========|======| netkit | | |
| | | | peer |=======(eBPF)=====>| primary | | |
| | | | | | | | | | |
| | | +--------+ | | +---------+ | |
| | | | | 2. bpf_redirect v |
| +-----------|-------------+ |___________________ +-------|
| | | | eth0 |
| | 5. bpf_redirect_peer(BPF_F_EGRESS) | +-------|
| |________________________ | |
| +-------------------------+ | | |
| | proxy (10.244.0.11) | | | |
| | IP_TRANSPARENT | | | |
| | +--------+ | | +---------+ | |
| | 3. packet <--| | | | | |<-- |
| | enters | netkit |<===========|======| netkit | |
| | [proxy] | peer |=======(eBPF)=====>| primary | |
| | 4. packet -->| | | | | |
| | leaves +--------+ | +---------+ |
| | sip=10.244.0.10 | |
| +-------------------------+ |
+---------------------------------------------------------------------+
Using the proxy use case as an example, in step 5 we would redirect
traffic leaving the proxy towards the pod's peer device using
bpf_redirect_peer(BPF_F_EGRESS).
As a bonus, since the skb doesn't have to go through the backlog queue
it can take full advantage of netkit's performance benefits. I set up a
test where outgoing iperf3 traffic is injected into the datapath of
another pod using either bpf_redirect_peer(BPF_F_EGRESS) or
bpf_redirect(BPF_F_INGRESS). I used Cilium's eBPF host routing mode
which skips the host stack and uses BPF redirect helpers to do all the
routing.
(net.ipv4.tcp_congestion_control=cubic,mtu=1500,100GiB link,Cilium
eBPF host routing mode)
BASELINE [bpf_redirect(BPF_F_INGRESS)]
1. [iperf pod] ==bpf_redirect([pod b], BPF_F_INGRESS)==> [pod b]
2. [pod b] ==bpf_redirect_neigh([eth0])==> eth0
3. eth0 ==over network==> [host b]
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-60.00 sec 231 GBytes 33.0 Gbits/sec 12060 sender
[ 5] 0.00-60.00 sec 230 GBytes 33.0 Gbits/sec receiver
TEST [bpf_redirect_peer(BPF_F_EGRESS)]
1. [iperf pod] ==bpf_redirect_peer([pod b], BPF_F_EGRESS)==> [pod b]
2. [pod b] ==bpf_redirect_neigh([eth0])==> eth0
3. eth0 ==over network==> [host b]
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-60.00 sec 272 GBytes 38.9 Gbits/sec 0 sender
[ 5] 0.00-60.00 sec 272 GBytes 38.9 Gbits/sec receiver
In this test, using bpf_redirect_peer(BPF_F_EGRESS) for the hop from
[iperf pod] to [pod b] led to ~18% more throughput compared to
bpf_redirect(BPF_F_INGRESS).
Signed-off-by: Jordan Rife <jordan@jrife.io>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260618182035.43811-2-jordan@jrife.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
This adds observability for the io_uring zcrx rx-buf-len configuration.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow uprobe_multi link to identify the target binary by an already
opened file descriptor.
Adding new BPF_F_UPROBE_MULTI_PATH_FD flag and the path_fd field for
the attr.link_create.uprobe_multi struct.
When the flag is set, we resolve the target from path_fd, without the
flag, we keep the existing string path behavior.
I don't see a use case for supporting O_PATH file descriptors, because
we need to read the binary first to get probes offsets, so I'm using
the CLASS(fd, f), which fails for O_PATH fds.
Assisted-by: Codex:GPT-5.4
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260611114230.950379-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e85 ("net: txgbe: rework service event handling")
57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2a6 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d5e ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes: 655f8919d549 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing IFLA_BOND_BROADCAST_NEIGH in if_link uapi header.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-2-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding support to use session attachment with tracing_multi link.
Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows
the BPF_TRACE_FSESSION behaviour but on the tracing_multi link.
Such program is called on entry and exit of the attached function
and allows to pass cookie value from entry to exit execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support to specify cookies for tracing_multi link.
Cookies are provided in array where each value is paired with provided
BTF ID value with the same array index.
Such cookie can be retrieved by bpf program with bpf_get_attach_cookie
helper call.
We need to sort cookies array together with ids array in check_dup_ids,
to keep the id->cookie relation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
