| Age | Commit message (Collapse) | Author |
|---|
|
Plenty of spots around the kernel need the full definition of struct
nfs_fh but not the cred, sunrpc, and uapi dependencies that
linux/nfs.h pulls in along with it.
Relocate struct nfs_fh to its own header, and include that header in
linux/nfs.h so existing consumers keep building. Over time, consumers
can then replace
#include <linux/nfs.h>
with
#include <linux/nfs_fh.h>
While relocating the code, add kernel-doc comments for the FH
operations and convert nfs_compare_fh() to return bool.
Link: https://patch.msgid.link/20260720141442.783935-2-cel@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
|
|
The Boot Loader Interface (BLI) [1] defines EFI variables that expose
boot loader state to the running OS. LoaderInfo identifies the boot
loader, while LoaderDevicePartUUID records the GPT partition UUID of
the partition containing it.
LoaderDevicePartUUID is used, for example, by systemd-gpt-auto-generator
[2] to identify the disk the boot loader was launched from and
automatically detect and mount partitions on it.
GRUB [3] and systemd-boot [4] populate these variables, but when the
kernel is started directly by EFI firmware, there is no conventional
external boot loader to provide them. In that case, because the EFI stub
performs the boot loader role, it should provide the variables itself.
Use LoaderInfo as a sentinel: if it is already set by an earlier boot
stage or cannot be set, bail out. Otherwise, populate the other BLI
variables.
Parse the loaded image device path, extract the GUID signature from its
GPT HD() node and publish it under the Linux loader entry vendor GUID as
the volatile LoaderDevicePartUUID EFI variable.
Install the efi_bli_set_variables() hook in both the generic efi-stub.c
path and the x86-specific x86-stub.c path.
[1] The Boot Loader Interface
Link: https://systemd.io/BOOT_LOADER_INTERFACE/
[2] systemd-gpt-auto-generator
Link: https://www.freedesktop.org/software/systemd/man/latest/systemd-gpt-auto-generator.html
[3] GRUB -- §16.2 bli
Link: https://www.gnu.org/software/grub/manual/grub/html_node/bli_005fmodule.html
[4] systemd -- systemd-boot UEFI Boot Manager
Link: https://github.com/systemd/systemd/blob/main/docs/BOOT.md?plain=1#L102
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
[ardb: - constify 'image' pointer parameter
- pass efi_guid_t* to efi_snprintf()]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
ucs2_as_utf8() takes a maxlength argument, which specifies how many
bytes the function is permitted to store into the destination buffer.
The same value is used as an upper bound for the ucs2_strnlen()
invocation, which is reasonable in the general case, as each UCS-2
character produces at least one byte of UTF-8 output, and so there is
never a need to process more than 'maxlength' UCS-2 characters.
However, if the UCS-2 string is not NUL terminated, ucs2_strnlen() may
read past the end of the buffer if 'maxlength' is set to a high value.
Current callers pass UCS-2 strings that are expected to be NUL
terminated, but for processing the load options in the EFI stub, a
version is needed that takes a separate limit argument. So split that
off from the current implementation.
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Marco Giunta <marco_giunta@outlook.it> says:
The aw88399 sysst check requires BSTS (boost finished) to assert during
startup. On hardware where the boost converter is bypassed via external
power supply (EN_HVBAT in BSTCTRL10, i.e. register 0x69 bit 2), BSTS never
asserts and init fails.
The vendor's generic Android driver (aw883xx, [1]) handles this by reading
EN_HVBAT and conditionally skipping the BSTS check.
When the original aw88399 driver was ported to the in-tree ASoC driver,
this logic was not included.
During the development of the HDA side codec driver, I worked around this
with a per-instance bsts_unreliable flag set from the HDA scodec
driver's per-model quirk table. While functional, this approach requires
every new device where the boost converter is bypassed to carry a quirk
entry, and prevents users from testing the driver on such devices via the
model= alc269 module parameter without a custom kernel to add the entry.
This series adds the correct hardware-based check from the vendor driver
(patch 1) and removes the now-unnecessary workaround (patch 2),
simplifying the code and removing a barrier to testing on new devices.
[1] https://www.awinic.com/en/driver/AW88399QNR/594
Link: https://patch.msgid.link/SN6PR19MB230304C2E75499FE23B53885FC8F2@SN6PR19MB2303.namprd19.prod.outlook.com
|
|
Now that the shared library correctly skips the BSTS check when the boost
converter is bypassed, the per-instance bsts_unreliable flag added as a
workaround in the HDA side codec driver is unnecessary.
Remove it from the library, the HDA driver, and the shared header.
This also simplifies testing the HDA side codec driver on new devices,
as new models no longer need a quirk entry to bypass the BSTS check.
Users can test via the model= module parameter in alc269 without a custom
kernel.
Signed-off-by: Marco Giunta <marco_giunta@outlook.it>
Link: https://patch.msgid.link/SN6PR19MB2303CC64AF7DEC3C5C98A512FC8F2@SN6PR19MB2303.namprd19.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The sysst check in aw_dev_check_sysst() requires BSTS (boost finished)
to assert, but on hardware where the boost converter is bypassed via
external power supply (BSTCTRL10 register 0x69, EN_HVBAT bit 2 set),
BSTS (SYSST register 0x01, bit 9) will never assert.
The vendor's generic driver (aw883xx) handles this by reading EN_HVBAT and
conditionally masking out BSTS from the sysst check. The in-tree driver
missed this logic when the original code was ported upstream.
Add the same conditional check, matching the vendor driver's
aw_dev_sysst_check() implementation.
Fixes: 8ade6cc7e261 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Marco Giunta <marco_giunta@outlook.it>
Link: https://patch.msgid.link/SN6PR19MB2303FF1922BF5F876378066FFC8F2@SN6PR19MB2303.namprd19.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Configure the driver to correctly initialize and enable the bass speakers
on devices utilizing the TAS2781 amplifier. Without this change, only the
tweeters or main speakers are active, leading to thin audio output.
Set up the required register sequences and routing to ensure the bass
channels are properly powered and mixed into the audio stream.
Signed-off-by: Georg Wenzel <g.wenzel@gmail.com>
Link: https://patch.msgid.link/20261004071202.89116-1-g.wenzel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is the same function to read from pageache. XFS will also need
this, so move this to core fsverity.
Note that f2fs and ext4 functions diverged a bit, as ext4 operated over
folios and f2fs operated over pages. The common one will operate over
folios.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://patch.msgid.link/20261002223705.2175542-5-aalbersh@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Let filesystem iterate over hashes in the block and check if these are
hashes of zeroed data blocks. XFS will use this to decide if it want to
store tree block full of these hashes.
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://patch.msgid.link/20261002223705.2175542-4-aalbersh@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
This function will be used by XFS's scrub to force fsverity activation,
therefore, to read fsverity context.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20261002223705.2175542-3-aalbersh@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running.
Fixes: bc1540561c9e ("power_supply: Add API for safe access of power supply function attrs")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260910-bq257xx-init-v3-1-4e219a1a04a5@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Every HiSilicon uncore PMU driver allocates its own static cpuhp state
even though they all register identical online/offline callbacks. This
wastes slots in the cpuhp state enum and needlessly fragments the
hotplug state space.
Move the cpuhp state setup into the shared hisi_uncore_pmu framework:
register a single dynamic state (CPUHP_AP_ONLINE_DYN) at framework
module init and export it for all HiSilicon uncore PMU drivers to use.
Drop the now-unused static CPUHP_AP_PERF_ARM_HISI_* entries from
include/linux/cpuhotplug.h.
The L3C PMU driver keeps a private dynamic state because it has its own
hotplug callbacks for migrating multiple per-CPU interrupt affinities,
but switches from its former static slot to CPUHP_AP_ONLINE_DYN for
consistency.
No intended functional changes.
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Match the BQ28Z620 under its own chip ID so that code touching its
relocated data flash can tell it apart from the BQ28Z610. Reuse the
BQ28Z610 register map and properties, as the standard commands the
driver reads are unchanged.
Keep the 10 mW scaling of AveragePower() even though the BQ28Z620 TRM
lists it in mW: readings on hardware match V * I only in 10 mW units.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20261002-bq28z620-v1-2-bdcc10d42519@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
- Fix task work flags management regression in the hrtimer
rearming code that can leave task work items unprocessed
(Karl Mehltretter)
* tag 'timers-urgent-2026-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Use the mask to clear TIF_HRTIMER_REARM from the exit work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix race between perf_event_exit_task() and perf_pending_task()
(Luo Gengkun)
- Fix perf header output management regressions (Ian Rogers)
- Require kernel access for text poke events (Zhengchuan Liang)
* tag 'perf-urgent-2026-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Require kernel access for text poke events
perf: Replace perf_event_header__init_id with full header init
perf: Fix race between perf_event_exit_task() and perf_pending_task()
|
|
Modern mount tools (util-linux >= 2.39.1) use the new mount API
(fsopen, fsconfig, fsmount, move_mount) instead of the legacy mount(2)
syscall. The generic SYSCALL audit record logs the fsopen syscall but
does not capture the filesystem name string, creating an audit gap for
filesystem mount operations.
Add an FSOPEN auxiliary record that logs the dereferenced filesystem
name string passed to fsopen(2).
type=SYSCALL ... : arch=x86_64 syscall=fsopen ... a1=FSOPEN_CLOEXEC
type=FSOPEN ... : fs_name="tmpfs"
Link: https://github.com/linux-audit/audit-kernel/issues/152
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
[PM: Christian Brauner commented "Seems fine"]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
During HDMI 2.1 FRL link training, the source and sink can negotiate a
Transmitter Feed-Forward Equalization (TxFFE) level to improve the
signal quality. Starting from zero, the source may increment the TxFFE
level up to a maximum agreed during the LTS3 stage if the sink keeps
reporting FLT failures. TxFFE adjustment is optional and only attempted
when both the source and the connected sink support it.
Since the existing HDMI PHY configuration API covers the FRL rate/lane
selection only, provide the following fields to the frl sub-struct of
phy_configure_opts_hdmi:
* ffe_level: the TxFFE level to apply, only meaningful when
set_ffe_level is set.
* set_ffe_level: a 1-bit flag that changes the semantics of the
phy_configure() call, i.e. when set, the PHY driver must apply the new
ffe_level and ignore the other frl related fields.
The flag-based approach reflects an important invariant in the link
training process: whenever the FRL rate or lane count changes, the TxFFE
level must be reset to zero. A separate phy_configure() call with
set_ffe_level can only follow after the rate has been established,
making the two operations deliberately distinct.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260901-hdptx-ffe-v2-1-3a5922c76fc5@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
iterate_dir() takes the directory's i_rwsem shared and holds it across
->iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock.
Fixes: 9d4e752a24f7 ("namespace: allow creating empty mount namespaces")
Cc: stable@vger.kernel.org # v7.1+
Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-19-dd44b89d44ce@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Don't let nullfs be watched. fanotify refuses mount and filesystem marks
on SB_NOUSER superblocks but inode marks of inotify, fanotify and
dnotify go through. The one inode of knullfs is the root of every
kernel thread and the following patches make it reachable from
userspace as the directory that stands in for an unmounted mount. A
watch placed through one such directory would report the opens through
all the others, across users.
Add FS_DISALLOW_NOTIFY next to FS_DISALLOW_NOTIFY_PERM, refuse a mark on
any object of such a filesystem in fsnotify_add_mark_list() where every
backend ends up and set it for nullfs. There's nothing to watch on a
permanently empty and immutable filesystem.
Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-16-dd44b89d44ce@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
|
|
finish_dispatch() uses the qseq embedded in p->scx.ops_state to tell
whether the QUEUED instance of a task it's about to claim is the one
scx_bpf_dsq_insert() saw. qseq is generated from rq->scx.ops_qseq, but
the counters of different rqs are independent, so if a task is dequeued
and re-enqueued on a different rq between scx_bpf_dsq_insert() and
finish_dispatch(), the new QUEUED instance can end up with the same
qseq as the old one:
CPU X CPU Z
----- -----
enqueue p on rq A, qseq = N
ops.dispatch()
scx_bpf_dsq_insert(p)
records qseq N
sched_setaffinity(p)
dequeue p from rq A
enqueue p on rq B, qseq = N
finish_dispatch(p, N)
qseq matches, p is claimed
The claim itself is still atomic so the core stays consistent, but an
insert issued for a previous QUEUED instance gets applied to a new one
which the BPF scheduler has just received through ops.enqueue(). This
breaks the guarantee that dispatches targeting a stale instance are
ignored.
Generate qseq from a per-task counter, p->scx.ops_qseq, instead so that
consecutive QUEUED instances of a task never share a qseq regardless of
which rq they're on. The counter is only updated in
scx_do_enqueue_task() with the task's rq locked, so no additional
synchronization is needed, and it fits in an existing hole in struct
sched_ext_entity on 64bit. Remove the now unused rq->scx.ops_qseq.
Never generate qseq 0. NONE and DISPATCHING don't carry a qseq, so
scx_bpf_dsq_insert() on a task in either state records 0. With a
per-task counter, every task's first QUEUED instance would otherwise get
qseq 0 and could be claimed by such an insert. Wrap the counter where
the QSEQ field wraps so that it can't reach a value that shifts to 0 on
32bit either.
Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Assisted-by: Claude:claude-opus-5.5
Signed-off-by: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
We have a few drivers using same pair of the PCI IDs across the kernel and
there seems more to go, consolidate AtomISP v2 PCI IDs in pci_ids.h database.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The software nodes ipu-bridge registers on a successful init are never
unregistered. There is no module_exit and no remove hook, and every
software_node_unregister_node_group() call sits on an error unwind label
inside ipu_bridge_init(), so on success the nodes stay registered and
readable after the module is unloaded, which a later rebind relies on.
Nothing reachable from a registered node may therefore point into the
module image. PROPERTY_ENTRY_BOOL() stores a pointer to its name, so the
"clock-noncontinuous" string literal leaves the surviving node carrying a
dangling property name once ipu-bridge is gone.
Add the name to struct ipu_property_names, which is copied by value into
each struct ipu_sensor, and use that copy, as every other endpoint
property name already does.
Fixes: 8e3def7bf410 ("media: ipu-bridge: Request non-continuous clock for ov5693 on IPU6")
Reported-by: D. Manresa <dmanresa@gmail.com>
Closes: https://lore.kernel.org/linux-media/20260905211307.542810-1-dmanresa@gmail.com/
Signed-off-by: Fernando Rimoli <fernandorimoli11@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 7.3-rc6. Nothing major
here, just lots of small fixes for reported issues, some of them very
long-standing:
- tty hangup fixes that have been there since the BKL days and kept
tripping people up over time.
- vt selection bugfix
- other vt bugfixes (memory leaks and screen update fixes)
- n_gsm bugfix
- qcom-geni serial driver bugfix
- 8250 serial driver bugfixes
- other tiny serial driver fixes
All of these have been in linux-next, the last few only a few days but
testing here seems solid (this pull request was generated on that
tree)"
* tag 'tty-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
tty: add missing driver flag kernel-doc colon
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
vt: skip screen update for DEC alignment test on backgroup consoles
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
serial: sc16is7xx: reduce TX refill rate with half-FIFO trigger
serial: sc16is7xx: refill TX FIFO below trigger using fresh TXLVL
serial: tegra: don't clear the Tx FIFO on an Rx-only reset
serial: sc16is7xx: fix TX gap caused by kfifo circular buffer wrap-around
tty: fix saved termios reset race
tty: serial: mpc52xx_uart: move static declarations up.
tty: serial: max3100: shut down timer before freeing port
tty: add break_wait kernel-doc
serial: qcom-geni: keep registered console runtime active
serial: qcom-geni: Fix unbalanced runtime PM resume for no_console_suspend
serial: qcom-geni: avoid unused-function warning
tty: serial: qcom_geni_serial: Keep console RX functional after deep idle
soc: qcom: geni-se: Correct QUP Core ICC vote constants
serial: 8250_bcm7271: fix use-after-free in brcmuart_remove()
serial: vt8500: Fix clock reference leak in vt8500_serial_probe()
kgdboc: Fix tty driver reference leak in configure_kgdboc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here is a big set of USB and Thunderbolt driver fixes for 7.3-rc6.
They were delayed on my side due to conference travel, not the fault
of the submitters at all. Included in here are:
- lots of small thunderbolt fixes for reported issues due to more
testing and devices and a few reverts as well based on that work
- more usb-serial device ids added
- usb-serial and cdc-acm driver hangup and other fixes
- dwc3 driver fixes for reported problems
- lots of usb gadget driver fixes as people again fuzz these drivers
and send in fixes, which is nice to finally see
- typec driver fixes for reported problems
- octeon-hcd driver fixes for reported problems
- more usb-storage quirks added
- other small USB driver bugs resolved for reported problems
All of these have been in linux-next without any reported issues"
* tag 'usb-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (63 commits)
usb: dwc3: gadget: fix IRQ storm on invalid event buffer count
Revert "usb: dwc3: gadget: fix IRQ storm on invalid event buffer count"
USB: gadget: dummy-hcd: Fix wait for outstanding request completions
usb: typec: port-mapper: Only match USB4 port if host interface is available
usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe
usb: dwc3: gadget: fix IRQ storm on invalid event buffer count
usb: typec: ucsi: Get the connector fwnode based on reg value
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
usb: core: clear both ep_in and ep_out for non-ep0 control endpoints
USB: cdc-acm: skip URB restart in port_shutdown if disconnected
usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC
usb: gadget: aspeed-vhub: cancel wake work on device removal
thunderbolt: Disable CL states for the Anker Prime TB5 dock
thunderbolt: stream: Announce support for FMODE_NOWAIT
usb: typec: ucsi: displayport: Current CAM OOB index fixup
usb: ohci-st: disable controller wakeup on removal
usb: ohci-spear: disable controller wakeup on removal
usb: ohci-s3c2410: disable controller wakeup on removal
usb: ohci-da8xx: disable controller wakeup on cleanup
usb: cdns3: fix use-after-free in cdns3_gadget_exit()
...
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Link: https://patch.msgid.link/20260907062518.12810-1-hemanth.selam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are no address spaces in Rust. LLVM emits plain loads and stores
for arena memory, without cast_kern:
r3 = 0x20 ll // R_BPF_64_64 .bss, libbpf puts it into arena
r2 = *(u64 *)(r3 + 0) // R3 invalid mem access 'scalar'
lock *(u64 *)(r2 + 8) += r1
Add BPF_F_ARENA_SCALAR flag of BPF_PROG_LOAD. When the program is loaded
with it and has an arena treat ldx, stx, st and atomics through a number
as arena access. It's as safe as access through PTR_TO_ARENA: JIT adds
the base of arena to the low 32 bits of the address. The program has
an arena only with CAP_BPF and CAP_PERFMON.
Registers of the program are not changed, since Rust compares and
stores the address after the access. bpf_do_misc_fixups() copies
the low 32 bits into BPF_REG_AX and the access goes through it:
r2 = *(u64 *)(r3 + 0) -> w12 = w3
r2 = *(u64 *)(r12 + 0)
Constant blinding needs BPF_REG_AX for immediates and leaves insns that
use BPF_REG_AX alone. So the immediate of st through a number is not
blinded, the rest of the program is:
*(u64 *)(r3 + 0) = 1 -> w12 = w3
*(u64 *)(r12 + 0) = 1
The same insn may see PTR_TO_ARENA on another path. It works for both.
It's a flag, since a number is also what the verifier makes of a pointer
that went away when the program has CAP_PERFMON: a ringbuf record after
bpf_ringbuf_submit(), a pointer to the packet after bpf_skb_pull_data().
Programs in C that have an arena keep "invalid mem access 'scalar'" for
such bugs.
JIT tells with bpf_jit_supports_arena_scalar() that it takes BPF_REG_AX
as the address of arena access. With other JITs the flag is rejected
with -EOPNOTSUPP. x86 and arm64 do:
- x86: the fault handler finds the register that holds the address
through reg2pt_regs[]. Add BPF_REG_AX, r10 of x86, there.
- arm64: nothing else is needed. The JIT takes any register as the
address and the fault handler reads it by its number. Compile tested
only.
Any number is an address of arena, NULL and small numbers included, like
it is for PTR_TO_ARENA: arena code in C dereferences NULL and relies on
the fault being handled.
Still rejected:
- insn that sees a number on one path and a pointer that is not
PTR_TO_ARENA on another.
- numbers passed to helpers and kfuncs, except __arena arguments.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20261002124714.180012-4-alexei.starovoitov@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The current REMOTE_EVENT() takes as a __printk argument a string format
and a list of arguments, such as RE_PRINTK("foo=%d bar=%d", foo, bar).
Add a REMOTE_EVENT_CUSTOM_PRINTK() where the __printk argument can be a
function. This intends to support the creation of a "printk" event for
the arm64 nVHE/pKVM hypervisor with a dynamic prototype and by extension
a dynamic print format.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://patch.msgid.link/20261001143000.3371786-4-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The Zone Management Receive command Zone Receive Action Specific (ZRASF)
reporting option values for the Full and Read Only zone states are swapped
compared to the NVM Express Zoned Namespace Command Set Specification,
Revision 1.5, Figure 35:
- 5h lists the zones in the ZSF:Full state.
- 6h lists the zones in the ZSRO:Read Only state.
The nvmet ZNS backend uses these constants to map the ZRASF value received
from the host to a block layer zone condition when filtering zones in
Report Zones. Because of the swap, a host asking for full zones was given
the read only zones, and a host asking for read only zones was given the
full zones.
Swap the values of NVME_ZRASF_ZONE_STATE_FULL and
NVME_ZRASF_ZONE_STATE_READONLY to match the specification.
Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Karl Bonde Torp <k.torp@samsung.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.4:
Cross-subsystem Changes:
Documentation:
- Fix indention in display-related DT bindings
Core Changes:
- Provide helpers for calculating absolute and relative timeouts
clients:
- fbdev: Move helpers from drm_kms_helper.ko to drm_client_lib.ko
display:
- dp/mst: Improve DPCD compliance
sched:
- fix locking
Driver changes:
amdxdna:
- Support AIE2 rev 9
- Fix UAF access in scheduler fences
- Update workqueue interface
bridge:
- Select DRM_PANEL_BRIDGE for various drivers that require it
host1x:
- Support partitioning
imagination
- Clean up firmware interface
imx:
- Replace simple-display with regular atomic helpers
ivpu:
- Simplify NULL-pointer handling in cleanup code
mxsfb:
- Support bus formats plus DT bindings
panel:
- ebbg-ft8719: Fix MODULE_LICENSE() string; Improve initialization
- edp: NV140WU2-M70
- ilitek-ili9882t: Support Ilitek IL79600A plus DT bindings
- simple: Support Truly TFT320240-229-E plus DT bindings; Support BOE
DV215FHM-R01 plus DT bindings
- Refactor struct drm_panel to contain struct drm_bridge plus fallout in
various panel drivers
panthor:
- Validate user-space input against firmware limits
renesas:
- Support RZ/G3L SoC
ssd130x:
- ssd132x: Set correct hardware window when clearing screen
host1x:
- support partitioning
panel:
- fix fallout from bridge-related changes
tegra:
- improve syncobj handling on submit
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20261002120720.GA720384@linux.fritz.box
|
|
Previously, all supported SoCs only used the A major revision. The
Tegra210B01 SoC incremented the major revision. Add support for this.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
|
|
Cross-merge BPF and other fixes after downstream PR.
Conflicts:
arch/arm64/net/bpf_jit_comp.c
arch/x86/net/bpf_jit_comp.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull smb client fixes from Paulo Alcantara:
"Fix a series of data corruption and I/O error bugs found by running
generic/363 (fsx) in a loop against Windows Server 2022 and Samba.
- Stop data dirtied past EOF through an mmap from reappearing as file
content once the file is extended by a write, truncate, zero range,
copy range or clone range
- Flush dirty data and drain in-flight I/O before operations that
assume the pagecache and the server agree on the file: querying
allocated ranges, the O_TRUNC open, interior zero range, and
server-side copy/clone
- Stop a genuine size-extending zero range or preallocate from being
refused with -EOPNOTSUPP when the inode is not read caching, by
querying the server's authoritative EOF instead of trusting a stale
cached i_size
- Zero the untransferred tail of a short read, both in the netfs
read-gaps path (where stale folio content could otherwise be
written back to the server) and in the DIO/unbuffered read
collector, and tell a real EOF apart from a stale cached
remote_i_size after a lease downgrade
- Require stable pages on signed connections so a buffered write
can't modify a folio whose signature has already been computed and
is in flight, which the server rejected with STATUS_ACCESS_DENIED
and the client surfaced as -EIO
- Split several cifsFileInfo flags out of a shared bitfield byte so
concurrent updates taken under different locks no longer clobber
each other through a byte-level RMW"
* tag 'cifs-fixes-7.3-rc6' of https://git.manguebit.org/linux:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
smb: client: require stable pages for signed connections
smb: client: distinguish real EOF from a stale remote_i_size on read
netfs: zero the tail of a short DIO/unbuffered read
smb: client: only require read lease for size-extending preallocate
netfs: zero gaps in read-gaps folio to avoid writing back stale data
smb: client: only require read lease for size-extending zero range
smb: client: drain and invalidate before server-side copy/clone
smb: client: flush dirty data before zeroing a range
smb: client: drain outstanding I/O before truncating on O_TRUNC open
smb: client: flush and commit data before querying allocated ranges
smb: client: discard post-EOF pagecache when extending a file via clone range
smb: client: discard post-EOF pagecache when extending a file via copy range
smb: client: discard post-EOF pagecache when extending a file via zero range
smb: client: clear post-EOF pagecache when extending a file via truncate
netfs: clear post-EOF pagecache when extending a file via write
|
|
Add documentation to describe StarFive JHB100 SoC System Controller
Registers.
Add the PLL clocks for the sys0, per0, and per1 domains under syscon,
as well as the PCIe RP reset.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix overflow of backward jump offset in constant blinding
(Alexei Starovoitov)
- Fix packet range of packet pointers sharing an id when var_off
tightens umax of one pointer and not the other (Alexei Starovoitov)
- Fix objects stuck in free_by_rcu_ttrace list of bpf memalloc
(Alexei Starovoitov)
- Fix use-after-free of progs detached from busy trampolines: wait for
an RCU tasks grace period before freeing trampoline progs, and patch
detached progs out of trampoline images that are still in use
(Florent Revest)
- Hold map BTF for the memory allocator destructor record to fix UAF in
deferred bpf_mem_alloc destruction (Kumar Kartikeya Dwivedi)
- Fix missing migration protection in resizable hashtab
lookup_and_delete batch operation (Ömer Mete Kaya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch()
selftests/bpf: Add a test for objects stuck in free_by_rcu_ttrace
bpf: Fix objects stuck in free_by_rcu_ttrace
bpf: Factor out __do_call_rcu_ttrace()
selftests/bpf: Test packet range of pointers sharing an id
bpf: Fix packet range of pointers sharing an id
selftests/bpf: Detach a trampoline prog while a task sleeps before it
bpf: Skip detached progs in trampoline images that are still in use
bpf: Wait for an RCU tasks grace period before freeing trampoline progs
bpf: Hold map BTF for the memory allocator destructor record
bpf: Fix overflow of jump offset in constant blinding
|
|
Add bindings for the Peripheral-3 clock and reset generator (PER3CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add bindings for the Peripheral-2 clock and reset generator (PER2CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add bindings for the Peripheral-1 clock and reset generator (PER1CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add bindings for the Peripheral-0 clock and reset generator (PER0CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add bindings for the System-2 clocks and reset generator (SYS2CRG) on
JHB100 SoC.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add bindings for the System-1 clocks and reset generator (SYS1CRG) on
JHB100 SoC.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add bindings for the System-0 clocks and reset generator (SYS0CRG) on
JHB100 SoC.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Store fdb destinations in struct net_bridge_dst and access them through
the destination helpers. This doesn't change their representation or
behavior, fdb destinations still contain only bridge port pointers.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260930071411.2786201-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of small fixes, which became much larger as a pile of
pending homework during my vacation in the last weeks.
The majority of changes are device-specific quirks and ASoC updates,
along with a few ALSA core fixes and USB-audio hardening as well as a
few regression fixes.
ALSA Core:
- Serialize ALSA sequencer compat port-info ioctls
HD-audio:
- Fix ALC235 codec headset handling
- Fix regression on Tegra194 controller support
- Quirks / fixes for Lenovo, ASUS, Acer, Dell, Higole, HP, and IPASON
laptops
USB-audio:
- Hardening for line6 and ua101 drivers to deal with malformed
packets
- Fix input device leak on probe error in caiaq driver
- Apply quirks generically for Audient and Behringer devices
- Quirks for ASUS SupremeFX Hi-Fi, HiBy FC4 (native DSD), and MSI MAG
B850M MORTAR WIFI
ASoC:
- Runtime PM fixes for SDCA class function driver
- Fix uninitialized stream configs in RT1017 and MAX98363 SDW codecs
- AMD ACP SoundWire support for ASUS and Lenovo models
- Quirks for Intel machines (Lenovo Yoga Slim 7, Chuwi Hi8)
- Qualcomm LPASS fixes for playback constraints and WSA macro volume
- Codec / platform fixes for rt274/rt286, cs42l43, wm8903, Tegra ASRC
Misc:
- Regression fix for silent playback on Creative Titanium HD
- Error handling fix at probe via auto-cleanup in ice1712"
* tag 'sound-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
spi: cs42l43: Workaround for wrong speaker ID on Dell XPS 13 DX13260
ALSA: ice1712: Fix the error handling via auto-cleanup at probe
ALSA: core: Define auto-cleanup for snd_card_free()
ALSA: hda/realtek: Add ALC235 support for headset mode
ALSA: hda/realtek: Add micmute LED quirk for Acer Swift SFG16-72
ALSA: hda/realtek: Fix mute and micmute LEDs on HP ENVY x360 15-ey0xxx
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion 14-dv1001TU
ALSA: ctxfi: Fix silent playback on Titanium HD (SB1270)
ALSA: usb-audio: Apply IGNORE_CTL_ERROR quirk to all Audient devices
ALSA: usb-audio: Apply boot quirk for Behringer models generically
ASoC: codecs: lpass-wsa-macro: rewrite the interpolator volume after enabling clocks
ALSA: hda/realtek: Fix speakers on ASUS PM3406CHA
ALSA: hda/realtek: Add quirk for HP Pavilion AiO 24 speaker
ALSA: hda/realtek: Add mute LED quirk for HP Laptop 15-fd2xxx
ASoC: amd: acp-config: Add ACP70 DMI quirk for ASUS UM5406GA
ALSA: hda/realtek: Add mute LED quirks for HP Pavilion 15-eh3174nw and HP Laptop 15-dw1xxx
ASoC: Intel: Add quirk to block match table for Lenovo Yoga Slim 7
ALSA: hda/realtek: Add mute LED quirk for HP Victus 15-fb2xxx
ALSA: hda/realtek: Add quirk for Acer Nitro AN515-45
ALSA: hda/realtek: Add quirk for Lenovo ThinkBook G8+
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- VMGENID memory needs to be mapped with the decrypted tag, so that
SEV-SNP machines can boot
- A fix for an initialization race in VMGENID, followed by a cleanup
- Trivial kernel doc cleanups in siphash and random.c
- A fix for a new compilation failure with recent clang on PPC and
RISC-V, due to generating an out-of-line memset in the vDSO
* tag 'random-7.3-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: vDSO: avoid call to memset() when zeroing reserved parameter
random: fix vgetrandom_opaque_params kernel-doc
random: vDSO: fix repeated word 'to' in comment
siphash: clean up kernel-doc comments
virt: vmgenid: move to using dev_set/get_drvdata
virt: vmgenid: set driver_data before registering notification handlers
virt: vmgenid: remap memory as decrypted
|
|
Remove the local TC9563_GPIO_MASK and TC9563_GPIO_DEASSERT_BITS
definitions, which are no longer used after switching to the GPIO
descriptor API. Move TC9563_GPIO_CONFIG and TC9563_RESET_GPIO
definitions in tc9563.h header file.
Replace the direct regmap-based per-port reset logic in
assert_deassert_reset() with gpiod_direction_output() calls, falling
back to the legacy regmap approach only when no reset-gpios DT
property is present for a given port.
Add the reset GPIO pointer to struct tc9563_pwrctrl_cfg and introduce
tc9563_pwrctrl_parse_reset_line() to look up reset-gpios from each PCI
downstream port child node. The lookup is done lazily at the beginning of
power_on(), returning -EPROBE_DEFER until the GPIO chip is registered.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260909-pci-tc9563-aux-v5-4-c9b33f56c8d3@oss.qualcomm.com
|
|
Add a driver for the GPIO controller embedded in the Toshiba TC9563 PCIe
switch (and the Qualcomm QPS615). The device implements 37 GPIOs using two
register banks: three registers control the first 32 GPIOs and three more
control GPIOs 32-36. GPIOs 20 and 21 are reserved while GPIOs 22-24,
27-28, 31, and 34 are input-only.
Register the driver as an auxiliary device driver. The TC9563 power
controller creates the auxiliary device and provides a regmap that gives
access to the GPIO registers, so use the gpio-regmap helpers to implement
the GPIO chip.
Signed-off-by: Alex Elder <elder@riscstar.com>
Co-developed-by: Daniel Thompson <daniel@riscstar.com>
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
Co-developed-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
[bhelgaas: commit log per https://lore.kernel.org/arQ2mDjqHv4gmoOK@lore-desk]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260909-pci-tc9563-aux-v5-2-c9b33f56c8d3@oss.qualcomm.com
|
