| Age | Commit message (Collapse) | Author |
|---|
|
On some boards a power sequencing target has no host-controllable enable
for its function, for instance when the enable line is not wired up to a
GPIO and is hardwired to an always-on level. The pcie-m2 "uart" target is
one such example: when the M.2 connector does not route the W_DISABLE2#
signal to a host GPIO, its enable/disable are no-ops and the consumer
cannot gate the Bluetooth function at all or exclusively.
Add a generic pwrseq_is_controllable() helper. It reports whether the
target's final unit provides a host-controllable dedicated power actuator.
The target can implement a new optional is_controllable() callback,
reporting whether that actuator is effective on this target (for example
depending on GPIO presence). If the target does not provide the callback,
it is assumed to be controllable.
Note this only describes the target's own enable actuator. It does not
imply that a power-off reaches an electrical OFF state, since a target may
have multiple consumers. It also does not mean that power is uncontrolled
for the target's dependencies: those may still be gated on their own. And
it does not restrict consumers from calling pwrseq_power_off() either,
which remains valid to drop this consumer's vote on the (possibly shared)
resources and dependencies of the target.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260904-monza-wireless-v6-3-d8c5042b3efd@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Instead of using 0 and 1 as magic numbers, let's add proper defines
whose names tell the reader what the meaning behind them is.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624-pwrseq-match-defines-v1-3-a59d90a951f1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider parts but does not implement any new DT bindings so that
the actual power sequencing is never revealed in the DT representation.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240605123850.24857-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
