| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee.git
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
Reject zero-sized allocations in tee_dyn_shm_alloc_helper()
* tag 'tee-fix-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
Fix kernel-doc warnings
* tag 'qcomtee-fix-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: qcomtee: fix kernel-doc warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
OP-TEE fixes for v7.3
- Register the TEE devices only once fully initialized
- Support FF-A shared memory offsets on large-page kernels
* tag 'optee-fixes-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: ffa: support shared memory offsets on large-page kernels
optee: register TEE devices only once fully initialized
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'qcomtee_fix_for_v7.3', 'qcomtee_for_v7.4', 'tee_for_v7.4' and 'optee_for_v7.4' into next
|
|
The OP-TEE driver reaches OP-TEE through the SMC ABI or the FF-A ABI,
both specific to Arm, yet builds both unconditionally together with the
SMC Calling Convention definitions they rely on: ffa_abi.c is always
compiled and only its registration is conditioned on
IS_REACHABLE(CONFIG_ARM_FFA_TRANSPORT), and optee_private.h includes
<linux/arm-smccc.h> and defines the SMC and FF-A specific types for
every file of the driver. This is fine as long as the driver depends on
HAVE_ARM_SMCCC, but it keeps the driver from being built for an
architecture without SMCCC, such as RISC-V.
Build smc_abi.c only when HAVE_ARM_SMCCC is set and ffa_abi.c only when
the FF-A transport is enabled, and provide stubs for their registration
otherwise, so that it fails with -EOPNOTSUPP as the FF-A ABI already
does when the FF-A transport is not reachable. Keep the SMCCC header,
the SMC invoke function type, the SMC and FF-A specific structures and
the SMC RPC register parameters in optee_private.h under the same
conditions, and drop the unused <linux/arm-smccc.h> include from
notif.c.
Make OPTEE depend on ARM_FFA_TRANSPORT || !ARM_FFA_TRANSPORT, as it
already does for RPMB, so that the driver is limited to a module when
the FF-A transport is one, rather than built in without FF-A support.
ffa_abi.c is thus built exactly when the FF-A transport is reachable
from the driver, and the IS_REACHABLE() checks in
optee_ffa_abi_register() and optee_ffa_abi_unregister() are always
true, so drop them.
OPTEE still depends on HAVE_ARM_SMCCC, so smc_abi.c is still always
built. The only visible change is that OPTEE=y can no longer be
combined with ARM_FFA_TRANSPORT=m: such a configuration now resolves to
OPTEE=m, with the FF-A ABI available.
Signed-off-by: Marouene Boubakri <marouene.boubakri@oss.nxp.com>
Signed-off-by: Jens Wiklander <jens.wiklander@oss.qualcomm.com>
|
|
OP-TEE FF-A memory objects use 4 KiB pages, while the kernel page
size may be larger. Consequently, tee_shm->offset can be greater than
or equal to FFA_PAGE_SIZE, but OP-TEE rejects such a value in
internal_offs.
Do not encode the excess page offset in offs_low/offs_high. Those
fields describe the logical memref offset and are copied back into
tee_param->shm_offs on return. Folding the page offset into them breaks
parameter round trips when a memref is reused. They are also ignored by
the OPTEE_RPC_CMD_SHM_ALLOC response path, which uses only global_id and
internal_offs to construct the shared-memory mobj.
Instead, start the FF-A descriptor at the 4 KiB page containing the
shared buffer, the same approach as optee_fill_pages_list() in the SMC
ABI. Store the remaining in-page offset in internal_offs and preserve
shm_offs in offs_low/offs_high. This keeps internal_offs within the
FF-A page size, maps RPC allocations at the correct address, and
preserves normal memref offsets across repeated invocations.
Tested on ARMv8-A with 64 KiB PAGE_SIZE. OP-TEE OS ran as a secure
partition under Hafnium (SPMC) over FF-A. Verified registered shared
memory with tee_shm->offset >= 4 KiB, memref reuse on the same
TEEC_Operation, and RPC OPTEE_RPC_CMD_SHM_ALLOC (xtest regression
6007-6009). optee_hello_world, optee_aes, and xtest regression 1005,
1007, 1008, 4001-4003 and 6001-6003 also passed.
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Acked-by: Liming Sun <limings@nvidia.com>
Acked-by: James Hurley <jahurley@nvidia.com>
Acked-by: Dave Thompson <davthompson@nvidia.com>
Signed-off-by: Mahantesh Salimath <mahantesh@nvidia.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@oss.qualcomm.com>
|
|
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_get(), which merely checks that
teedev->desc is non-NULL, which was already set by tee_device_alloc().
Therefore, there is effectively no gate at all.
A context opened in that window can run against a struct optee where
- optee->call_queue.mutex is not initialized by optee_cq_init()
- optee->supp mutex and completions is not initialized by
optee_supp_init()
- optee->rpmb_dev_mutex is not initialized yet,
- the message argument cache is not initialized by
optee_shm_arg_cache_init()
- optee->ctx is still NULL
Any open session or invoke during this window takes uninitialized
mutexes and dereferences a NULL pointer.
Fix it by moving both tee_device_register() calls down to the point
where all of struct optee is set up.
Fixes: 4fb0a5eb364d ("tee: add OP-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Shao-Fu Chen <shf.chen@mediatek.com>
[JW: adding fixes and cc]
Signed-off-by: Jens Wiklander <jens.wiklander@oss.qualcomm.com>
|
|
tee_dyn_shm_alloc_helper() derives nr_pages from a caller-supplied size
and passes it to alloc_pages_exact() without checking it. For size == 0
nr_pages is 0, and alloc_pages_exact(0) calls get_order(0), which is
documented as undefined and returns BITS_PER_LONG - PAGE_SHIFT. The page
allocator then trips its order > MAX_PAGE_ORDER warning and fails the
allocation; on a panic_on_warn kernel that ends the boot.
This can be triggered by TEE_IOC_SHM_ALLOC with struct
tee_ioctl_shm_alloc_data where size is 0.
Reject a zero page count, as register_shm_helper() already does for the
register path.
Fixes: cf4441503e20 ("tee: optee: Move pool_op helper functions")
Cc: stable@vger.kernel.org
Cc: lvc-project@linuxtesting.org
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@oss.qualcomm.com>
|
|
The driver explicitly sets the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop this
unused assignment.
While touching this array unify spacing and usage of commas and use
a named initializer for .name for improved readability.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@oss.qualcomm.com>
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
Fix kernel-doc issues present since the driver was added in commit
d6e290837e50 ("tee: add Qualcomm TEE driver"):
- async_release() documents its second parameter as @msg, but the
parameter is named async_msg (msg is a local variable);
- struct qcomtee_msg_object_invoke documents member @ctx, but the
member is named cxt;
- enum qcomtee_arg_type leaves QCOMTEE_ARG_TYPE_NR undescribed.
The cxt spelling is part of the QTEE message format and is used
throughout the driver; struct qcomtee_msg_callback in the same header
already documents it as @cxt, so the comment is corrected rather than
the member.
No functional changes.
Fixes: d6e290837e50 ("tee: add Qualcomm TEE driver")
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Assisted-by: Claude:claude-opus-5 [kernel-doc]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
Sashiko (locally) reports a possible null dereference under memory
pressure due to the lack of validation of the allocated pointer.
Fix that by adding the missing check.
Fixes: 2b78d79cdf96 ("optee: FF-A: dynamic protected memory allocation")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Sebastian Ene <sebastianene@google.com>
Signed-off-by: Jens Wiklander <jenswi@kernel.org>
|
|
The driver explicitly sets the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop this
unused assignment.
While touching this array unify spacing and usage of commas and use
a named initializer for .name for improved readability.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jenswi@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
OP-TEE updates for 7.2
- Fix kernel-doc warnings in optee_private.h and optee_msg.h
- Allow MT_NORMAL_TAGGED shared memory to support ARM64 MTE buffers
* tag 'optee-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: fix kernel-doc warnings
tee: optee: Allow MT_NORMAL_TAGGED shared memory
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
AMD-TEE update for 7.2
Store buffer ID in tee_shm->sec_world_id and remove internal tracking
structures to align with other TEE drivers
* tag 'amdtee-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: amdtee: store buffer ID in tee_shm->sec_world_id
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
QCOMTEE fix for v7.1
Adding a missing va_end in early return qcomtee_object_user_init()
* tag 'qcomtee-fix-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
OP-TEE fix for v7.1
Prevent possible use after free in supplicant communication.
* tag 'optee-fix-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: prevent use-after-free when the client exits before the supplicant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
TEE fixes for v7.1
Fixing:
- params_from_user() cleanup in error path in tee_ioctl_supp_recv()
- possible tee_shm leak in error path in register_shm_helper()
- padding in struct tee_ioctl_object_invoke_arg
* tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
qcomtee_object_user_init() is a variadic function and when the function
return because there's no dispatch callback in QCOMTEE_OBJECT_TYPE_CB
case, there's no va_end to cleanup "ap" object initialized by va_start
and that can cause undefined behavior. So make sure to use va_end before
returning the error code when there's no dispatch callback.
This is reported by Coverity Scan as "Missing varargs init or cleanup".
Fixes: d6e290837e50 ("tee: add Qualcomm TEE driver")
Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
params_from_user() may acquire tee_shm references for MEMREF parameters
before failing after partially processing the supplied parameter array.
In tee_ioctl_supp_recv(), those references are currently not released on
that error path.
Fix this by freeing MEMREF references before returning when
params_from_user() fails.
Keep the final cleanup path in tee_ioctl_supp_recv() unchanged since
supp_recv() may consume and replace the supplied parameters, unlike the
other TEE ioctl callback paths.
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
register_shm_helper() allocates shm before calling
iov_iter_npages(). If iov_iter_npages() returns 0, the function
jumps to err_ctx_put and leaks shm.
This can be triggered by TEE_IOC_SHM_REGISTER with
struct tee_ioctl_shm_register_data where length is 0.
Jump to err_free_shm instead.
Fixes: 7bdee4157591 ("tee: Use iov_iter to better support shared buffer registration")
Cc: stable@vger.kernel.org
Cc: lvc-project@linuxtesting.org
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Fix kernel-doc issues in optee_private.h and optee_msg.h:
- Add missing documentation for struct members: optee_msg_param_value,
optee_msg_param, optee_msg_arg, optee, and optee_ffa;
- Ensure member descriptions follow the order of declaration;
- Use consistent formatting (lowercase descriptions and ':' after
member names);
- Adjust indentation for better alignment;
This resolves kernel-doc warnings such as missing member descriptions
and incorrect prototype documentation.
No functional changes.
Signed-off-by: Rodrigo Zaiden <rodrigoffzz@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
On ARM64, shared memory can have MT_NORMAL_TAGGED attribute when using
the Memory Tagging Extension (MTE). The OP-TEE driver needs to
recognize this as normal memory to allow sharing such buffers with the
Secure World.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Drop struct amdtee_shm_data and the per-context shm_list. In
handle_map_shmem() save the returned buf_id in shm->sec_world_id
instead of allocating a list node. Use shm->sec_world_id (with
get_buffer_id() removed) in amdtee_unmap_shmem() and in call.c when
building memref params. Remove shm_list and shm_mutex from
amdtee_context_data.
Aligns amdtee with other TEE drivers (optee, tstee, qcomtee) that use
tee_shm->sec_world_id for the secure-world handle.
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
|
|
Simplify the TEE implementor ID match by returning the boolean
expression directly instead of going through an if/else.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Earlier TEE subsystem assumed to refcount all the memory pages to be
shared with TEE implementation to be refcounted. However, the slab
allocations within the kernel don't allow refcounting kernel pages.
It is rather better to trust the kernel clients to not free pages while
being shared with TEE implementation. Hence, remove refcounting of kernel
pages from register_shm_helper() API.
Fixes: b9c0e49abfca ("mm: decline to manipulate the refcount on a slab page")
Reported-by: Marco Felsch <m.felsch@pengutronix.de>
Reported-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the
client wait as killable so it can be interrupted during shutdown or
after a supplicant crash. This changes the original lifetime expectations:
the client task can now terminate while the supplicant is still processing
its request.
If the client exits first it removes the request from its queue and
kfree()s it, while the request ID remains in supp->idr. A subsequent
lookup on the supplicant path then dereferences freed memory, leading to
a use-after-free.
Serialise access to the request with supp->mutex:
* Hold supp->mutex in optee_supp_recv() and optee_supp_send() while
looking up and touching the request.
* Let optee_supp_thrd_req() notice that the client has terminated and
signal optee_supp_send() accordingly.
With these changes the request cannot be freed while the supplicant still
has a reference, eliminating the race.
Fixes: 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop")
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Tested-by: Ox Yeh <ox.yeh@mediatek.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE sysfs for 6.20
- Add an optional generic sysfs attribute for TEE revision
- Implement revision reporting for OP-TEE using both SMC and FF-A ABIs
* tag 'tee-sysfs-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: store OS revision for TEE core
tee: add revision sysfs attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
AMDTEE update for 6.20
Remove unused return variables
* tag 'amdtee-update-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: amdtee: Remove unused return variables
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE bus callback for 6.20
- Move from generic device_driver to TEE bus-specific callbacks
- Add module_tee_client_driver() and registration helpers to reduce
boilerplate
- Convert several client drivers (TPM, KEYS, firmware, EFI, hwrng,
and RTC)
- Update documentation and fix kernel-doc warnings
* tag 'tee-bus-callback-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tpm/tpm_ftpm_tee: Fix kdoc after function renames
tpm/tpm_ftpm_tee: Make use of tee bus methods
tpm/tpm_ftpm_tee: Make use of tee specific driver registration
KEYS: trusted: Make use of tee bus methods
KEYS: trusted: Migrate to use tee specific driver registration function
firmware: tee_bnxt: Make use of tee bus methods
firmware: tee_bnxt: Make use of module_tee_client_driver()
firmware: arm_scmi: Make use of tee bus methods
firmware: arm_scmi: optee: Make use of module_tee_client_driver()
efi: stmm: Make use of tee bus methods
efi: stmm: Make use of module_tee_client_driver()
hwrng: optee - Make use of tee bus methods
hwrng: optee - Make use of module_tee_client_driver()
rtc: optee: Make use of tee bus methods
rtc: optee: Migrate to use tee specific driver registration function
tee: Adapt documentation to cover recent additions
tee: Add probe, remove and shutdown bus callbacks to tee_client_driver
tee: Add some helpers to reduce boilerplate for tee client drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
OP-TEE update for 6.20
- A micro optimization by making a local array static const
- Update OP-TEE mailing list as moderated
- Update an outdated comment for cmd_alloc_suppl()
* tag 'optee-update-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: make read-only array attr static const
MAINTAINERS: Mark the OP-TEE mailing list moderated
optee: update outdated comment
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Don't populate the read-only array attr on the stack at run
time, instead make it static const.
Signed-off-by: Colin Ian King <coking@nvidia.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Collect OP-TEE OS revision from secure world for both SMC and FF-A
ABIs, store it in the OP-TEE driver, and expose it through the
generic get_tee_revision() callback.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
|
|
Add a generic TEE revision sysfs attribute backed by a new
optional get_tee_revision() callback. The revision string is
diagnostic-only and must not be used to infer feature support.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
In tee_params_to_amd_params() and amd_params_to_tee_params(), return 0
directly and remove the unused return variables.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The function cmd_alloc_suppl() was renamed as
optee_rpc_cmd_alloc_suppl() in commit c51a564a5b48
("optee: isolate smc abi"). Update the comment
accordingly.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Introduce a bus specific probe, remove and shutdown function. For now
this only allows to get rid of a cast of the generic device to a
tee_client device in the drivers and changes the remove prototype to
return void---a non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all tee_client drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Similar to platform drivers (and others) create dedicated register and
unregister functions and a macro to simplify modules that only need to
handle driver registration in their init and exit handlers.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
QCOMTEE fixes2 for v6.18
- initialize result before use in in error path
- fix uninitialized pointers with free attribute
* tag 'qcomtee-fixes2-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: qcomtee: initialize result before use in release worker
tee: qcomtee: fix uninitialized pointers with free attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
