| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- pKVM state isolation: years after pKVM started being enabled
upstream, we finally get the basics in the form of state isolation.
The vcpu state is now off-limit for the host for protected VMs
- pKVM also grows a hypervisor-private memory allocator, allowing it
to deal with sub-page allocation, much like everywhere else
- pKVM also lands a trace_printk() equivalent, which hopefully will
make debugging a bit easier
- First shot at annotating portions of the KVM/arm64 code to be
extracted and built on s390. The real fun is yet to come
- Allow pre-faulting of stage-2 canonical mappings from userspace,
joining x86 and s390 in implementing this feature
- Add a reverse mapping infrastructure for shadow stage-2,
significantly improving performance when MMU notifiers kick in, and
avoiding full unmap of all shadow tables for this VM
- Next step of GICv5 enablement, adding support for the IRS block,
and providing both SPI and LPI support. This is the first point
where KVM/arm64 can support an SMP GICv5 guest
- As a preliminary to eventually enabling CCA, add a bunch of
infrastructure to KVM/arm64, splitting some of the basic operations
into individual backends (normal VM, normal pKVM VM, protected pKVM
VM). This allows CCA to later slot in without polluting the rest of
KVM with its firmware-driven nonsense
- Make ID registers immutable from the point where a vcpu is able to
run, even if it fails to run. This prevents KVM from sampling
untrusted values
- Restore some type checking to the EL2 object. KVM/arm64 originally
had some strong type checking between the kernel and the EL2
object, but lost it along the way when the private hypercall
interface was (somewhat pointlessly) converted to SMCCC. Type
checking is back, syscall style, and with added sparse goodies
- Expand the FFA support to FFA_NOTIFICATION_*, and add some
sanitisation of the protocol that pKVM relays to the "trusted"
runtime
- Make GICv3 RD assignment more robust to userspace nonsense
- Convert the remaining MMU fault handler backends to
kvm_s2_fault_vma_info and co., fixing a number of bugs in the
process
- Fix the SError/SEA selftests to be both more robust and less
braindead
- Fix a smattering of documentation bugs, some of them as a result of
our AI friends spitting out credible assertions based on
non-existing symbols
- The usual collection of low impact bug fixes (SMCCC, timers, PMU)
Loongarch:
- Add separate vmid support
- Simplify MSI interrupt injection
- Add crash hypercall support
- Allow to set pv_feature until vCPU run
- Enable HW page table walk automatically in selftests
s390:
- rework page allocation for secure guest variable storage
- Selftests and documentation improvements
- Replace get_zeroed_page with kzalloc
- Fix corner cases of floating interrupt injection
- Initial arm64 on s390 support
x86:
- Clean up the handling of vcpu->arch.xen.long_mode to be consistent
and correctly handle 32-bit/64-bit alignment, and various other bug
fixes have accumulated over the months since v1
- Grab KVM's SRCU "lock" in kvm_zap_gfn_range() to fix a recurring
bug where callers fail to do so
- Fix a variety of issues in the pre-fault code that are mostly
benign in the current code base, but will show up in big ways
if/when the pre-faulting logic is used to implementing
prefetch-on-fault for the TDP MMU
- For PREEMPT_RT=y kernels, drop the rmaps' individual bit-spinlock
and just walk the rmaps' with mmu_lock taken. On the write side
(which always uses mmu_lock), the bit-spinlock was assuming that
preemption was disabled, but that is *not* true when rwlocks become
sleepable
- Prepare a memory_fault exit (paired with -EFAULT) when KVM hits an
error PFN, e.g. so that userspace can resolve transient issues
instead of killing the guest. Convert a variety of WARN()+EFAULT
paths into KVM_BUG_ON()+EIO so that KVM can hard commit to filling
memory_fault on -EFAULTs that occur in the page fault path
- Fix a NX hugepage un-accounting bug where KVM would always uncharge
the shadow MMU, even when handling TDP MMU pages
- Mask off the address space ID when checking for illegal usage of
kvm_set_internal_memslot() to prevent false negatives on the sanity
check
- Explicitly zero reserved flags when delivering a SynIC message to
avoid leaking a byte of stack information to the guest
- Rework TDX's handling of the canonical MMU root level to not rely
on userspace to fill CPUID correctly, as doing so lets userspace
trivially trigger a KVM_BUG_ON()
- Reject KVM_SET_NESTED_STATE if userspace "restores" L1 with
EFER.LMA=1 && EFER.LME=0, which confuses KVM into trying to
configure an 64-bit MMU without PAE
- Ignore EFER.LMA (clear it from KVM's cached save state) if
EFER.LME=0 when preparing L2 state, to fix another way to confuse
KVM's MMU (and because real hardware also ignores EFER.LMA)
- Improve KVM's sanity checks for a misconfigured MMU to (hopefully)
detect all of the ways KVM can botch EFER.LMA vs. CR4.PAE
- Remove the "full" out-param from kvm_x86_ops.flush_tlb_gva() as the
param is only used to avoid what effectively amounts to a single
memory write
- Fix a mostly-benign bug where KVM can write through a guest's
read-only mapping due to not checking the error code when
expediting emulated MMIO page faults
- Honor the guest's view of the "EFER.LMSLE must be zero" defeature
so that userspace can provide migration compatibility between Rome
and Milan+
- Pend a KVM_REQ_EVENT request when an exception is morphed into a
nested VM-Exit, otherwise KVM can fail to actually deliver the
nested VM-Exit, e.g. when injecting a page fault
- Add support for PML on SVM
- Add support for virtualizing Bus Lock Detect on SVM, and fix a
number of DR6 bugs and warts along the way
- Fix a variety of warts in KVM's handling of guest TSC, kvmclock,
and timekeeping in general, as a (big) first step towards
addressing several longstanding problems with the kvmclock
implementation. Most notably, fix a precision issue where
get_kvmclock_ns() computed the clock from the *host* TSC without
applying guest TSC scaling, causing systemic drift from the values
the guest computes from its own TSC
- Rip out KVM's shadow timekeeping structures, now that ktime
snapshots are powerful enough to replace it
- Misc fixes and cleanups
x86 (AMD):
- Fix a benign-in-practice bug where KVM unintentionally sets a
non-zero error code when delivering exceptions to SEV-ES+ guests
- Force a new ASID in both VMCBs on pCPU migration to fix a bug where
KVM can run a VMCB with a stale ASID due to the tracking being
per-CPU, not per-VMCB
- Return INVALID_INPUT to the guest instead of exiting to userspace
with -EIO if KVM can't access "guest request" buffer, i.e. try to
keep the guest alive if the guest or userspace goofs
x86 (Intel):
- Enable Notify VM-Exits (now called Instruction Timeout in the SDM)
and Bus Lock VM-Exits for TDX guests when they're enabled by
userspace (KVM forgot to wire up the TDX Module knobs)
- Move all common (between VMX and TDX) APIs/helpers to
common.h/main.c, and change all namespace prefixes from "vmx" to
"vt"
- Fix a thankfully benign bug (due to other areas of KVM being
hardened) where userspace can bypass INIT_MEM_REGION's address wrap
check by providing a nr_pages that will overflow a u64 when
converted to bytes, and fix an also- benign off-by-one bug in the
check (inclusive vs. exclusive)
- Set the vmcs.GUEST_ACTIVITY_STATE back to ACTIVE when userspace
sets KVM's mp_state to anything other than HALTED, e.g. so that a
vCPU doesn't get stuck in HLT if userspace emulates RESET
guest_memfd:
- Take the invalidate lock when unbinding a dying file to fix a race
with kvm_gmem_invalidate_end() that results in KVM leaving the MMU
invalidation count elevated. Not taking the lock in the first place
was pure misguided paranoid
- When binding a memslot, purge the bindings if storing the new
memslot fails, as Xarray's "store range" API can subtly fail
partway through
- Establish memslot<=>guest_memfd bindings *after* the memslot is
ready, as the memslot becomes reachable the instant the binding is
installed
- Don't grab a page refcount when reloading an SNP VMSA and stop
returning a "struct page" from guest_memfd's PFN lookup altogether,
to ensure that KVM doesn't hold any unnecessary refcounts (the
lifetime of the page is ensured by MMU notifiers and similar
hooks). Preventing unnecessary refcounts greatly simplifies
supporting in-place SHARED=>PRIVATE conversions
- Add support for in-place PRIVATE<=>SHARED conversion, i.e. allow a
single guest_memfd instance to be used for both PRIVATE and SHARED
variations of CoCo guests' memory (though not at the same time).
This eliminates the need to double allocate guest memory for TDX
and SNP, and is basically a hard requirement for pKVM, which relies
on being able to preserve memory contents on conversions
- Hack-a-fix a deadlock bug in ->error_remove_folio() by returning
-EBUSY if the filemap invalidate lock is contended. Punt on a
proper fix for the moment, as a proper fix likely involves
reworking truncate_error_folio()
- Add a pile of selftests for in-place conversions
- Misc guest_memfd cleanups
Generic:
- Move some configuration items to preprocessor symbols, to help with
arm-on-s390's need to compile the same code twice with different
values
- Allow KVM implementations to choose alternative device names, also
for s390's support of ARM virtualmachines
- Switch the KVM-VFIO interface and external consumers over to
standard file-based reference counting, eliminating all external
KVM symbol exports
Selftests:
- Rework KVM selftest's handling of memory regions all so that PPC
can force its page table allocations to be naturally aligned
- PPC support
- Fix emulation of VMPTRST and VMPTRLD when eVMCS is in-use to match
real Hyper-V's behavior
- Saturate L2's TSC frequency if stacking L1 and L2 scaling
multipliers exceeds what hardware supports, as attempting to run L2
with an illegal multiplier will either cause VM-Entry to fail (VMX)
or trigger a #GP when writing MSR_AMD64_TSC_RATIO (SVM). The #GP is
thankfully benign in the grand scheme as even "unsafe" WRMSRs have
exception fixup
- Rework KVM selftest's handling of memory regions so that PPC can
force its page table allocations to be naturally aligned
- Clean up selftest's VMX instruction helpers, and drop an absurd
number of completely useless return values, e.g. functions that
unconditionally return %true and then have every caller assert
success
- Add selftests support for Zhaoxin CPUs
- Overhaul the TSC scaling test to add a regression test for the
saturation behavior, and to increase its coverage in general
- Fix selftests usage various NUMA syscalls to account for an
undocumented, but known since 2007, off-by-one kernel bug. Add
helpers to try and avoid re-introducing the same flaws in the
future
- Automatically run xAPIC IPI migration test (between NUMA nodes)
when possible, as the entire point of the test is verify KVM's
handling of page migration of the APIC backing page
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (506 commits)
KVM: always make in-place conversion a compile-time constant when possible
KVM: x86: leave the legacy private attribute in for TDX and SEV
KVM: split CONFIG_KVM_PRIVATE_MEMATTR_VM out of KVM_VM_MEMORY_ATTRIBUTES
selftests: kvm: remove useless comma operator
arm64: Use proper include variant
MAINTAINERS: Add entry for ARM on s390 KVM
KVM: s390: arm64: Integrate arm on s390
KVM: s390: arm64: Implement basic page fault handler
KVM: s390: arm64: Implement vCPU IOCTLs
KVM: s390: arm64: Implement vm/vcpu create destroy
KVM: s390: arm64: Implement required functions
KVM: s390: Add basic arm64 kvm module
s390/hwcaps: Report SAE support as hwcap
KVM: s390: arm64: Introduce host definitions
s390: Introduce Start Arm Execution instruction
KVM: s390: Use arm64 code
s390/tools: Use arm64 headers
KVM: s390: Use dedicated function for migration mode
s390/Kconfig: remove PCI dependency from HAS_IOMEM
KVM: s390: Kick PV cpus at the right time for service irqs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for sclp-vt220 terminal resize events e.g. for QEMU
- Warn if kernel command line contains non-printable EBCDIC characters
- Improve show_code() disassembly output by using reliable markers for
the instruction address and faulting instruction
- Rework exception handling to require only a single exception table
entry per faulting instruction: convert all inline assemblies from
EX_TABLE to the new EX_TABLE_INSN macros. The previous exception
handling was error prone since it usually required two EX_TABLE
entries: one pointing at the instruction, and one pointing behind it
- Disallow kprobes on instructions with exception table entries to
avoid exception handlers decoding a breakpoint instead of the
original instruction
- Preemptible percpu ops changes:
- Simplify percpu_entry() and percpu_exit() by encoding the percpu
base, offset, and pointer registers into the lowcore marker,
allowing percpu_exit() to update the percpu pointer on CPU
migration without comparing the interrupted instruction
- Convert this_cpu_cmpxchg(), this_cpu_xchg(), and
this_cpu_cmpxchg128() to preemptible percpu ops; provide
this_cpu_try_cmpxchg()
- Emulate virtual timer in appldata via delayed work and remove the
s390 specific vtimer infrastructure
- Add lock contention tracepoints to rwlock slowpath
- Fix incorrect return address in signal frame setup
- Fix cpum_cf CPU hotplug handling
- Convert various __get_free_pages() / get_zeroed_page() users to
kmalloc() / kzalloc()
- PCI:
- Improve RPCIT instruction tracing
- Fix double-free, use-after-free, and resource leaks in zPCI MSI
and IRQ setup / cleanup paths
- Crypto and zcrypt:
- Improve reply message and length verification checks for CCA,
EP11, and ICA messages to prevent out-of-bounds reads
- Add missing array_index_nospec() for domain index uses in zcrypt
to prevent speculative execution bypass
- Fix out-of-bounds read in cca_query_crypto_facility()
- Various other small fixes and improvements
* tag 's390-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (102 commits)
s390/signal: Cleanup coding style
s390/signal: Fix incorrect return address in signal frame
s390/probes: Fix wrong mnemonic comment for clgib
s390/probes: Add missing fixup for bctgr and bic
s390/probes: Fix wrong opcode for cgrb fixup
s390: Select ARCH_MEMORY_ORDER_TSO
s390/mm: Cleanup pXXp_flush_lazy() routines
s390/pci: Add function handle to RPCIT insn trace
s390/pci: Use 32-bit fh outside of inline asm
s390/pci: Adjust alignment in insn trace
s390/sclp: Remove redundant memset after memblock_alloc_low()
s390/entry: Save lowcore on invalid kernel stack
s390/entry: Last breaking event vs invalid kernel stack
s390/percpu: ImplemenHeiko Carstenst this_cpu_try_cmpxchg()
s390/percpu: Drop unused output register from arch_this_cpu_to_op()
s390/percpu: Drop unused output register from arch_this_cpu_add()
s390/percpu: Use asm_inline for arch_this_cpu_add()
s390/extable: Remove EX_TABLE macros and fallback extable search
s390/bpf: Simplify exception table entry handling
s390/sclp: Convert inline assembly to EX_TABLE_INSN
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Changes for 7.4
- rework page allocation for secure guest variable storage
- selftests
- documentation
- replace get_zeroed_page with kzalloc
- fix floating interrupt inject for corner cases
- initial arm64 on s390 support
This also contains the patch
"arm64: Use proper include variant"
as a build fix. It is also part of the arm tree.
|
|
Report SAE support as hwcap (and /proc/cpuinfo)
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
memblock_alloc_low() returns zeroed memory, so the memset after the
allocation in sclp_early_get_core_info() is redundant.
So remove the memset.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert the sclp_service_call exception table entries to use
EX_TABLE_INSN.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert the diag_ftp exception table entry to use EX_TABLE_INSN.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
fs3270_ioctl() initializes rc to 0 and its cmd switch has no default
branch, so an unrecognized ioctl command returns success without doing
anything. Follow the ioctl convention and reject unknown commands with
-ENOTTY.
[hca@linux.ibm.com: shortened commit description]
Signed-off-by: Shirong Zhao <shxzhaosr@163.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The cma_alloc bit as well as the response can contain old data.
cma_release will not free the kmalloced memory in that case and
the response code might leak kernel stack data to CAP_SYS_ADMIN
users.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add support for sclp vt220 resize events to enable host-initiated
terminal resizing when using the sclp-vt220 console.
This allows QEMU to dynamically resize the console. On older kernel
versions, these events are safely ignored as the kernel drops events
with undefined tty codes.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Introduce sclp-vt220 event buffer type to replace the
byte-manipulation behavior in the receiver function with well defined
primitives.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In preparation for converting the kmalloc family of allocators to the
type-aware kmalloc_obj family, we need to make sure that the returned
type from the allocation matches the type of the variable being
assigned. (The kmalloc family returns "void *", which can be implicitly
cast to any pointer type.)
These allocate as many pointers as ebc_key_maps and ebc_func_table hold,
but the sizes were taken from the whole arrays, which would make the
allocation types pointers to those arrays rather than the "u_short **"
and "char **" being assigned. Allocate ARRAY_SIZE-many entries instead.
The resulting allocation sizes are the same.
Build tested ARCH=s390 allmodconfig with GCC s390x-linux-gnu 16.1.0:
drivers/s390/char/keyboard.o
Assisted-by: LLM coccinelle
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
All character drivers pass clang's compile time context analysis.
Therefore enable CONTEXT_ANALYSIS.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add __must_hold() attribute to raw3215_make_room() in order to let
clang's context analysis know that "get_ccwdev_lock(raw->cdev)" must be
held on function entry. This can also be easily verified when inspecting
the function.
Without this annotation this leads to a valid warning when context
analysis is enabled:
drivers/s390/char/con3215.c:485:9: warning:
expecting spinlock 'raw->cdev->ccwlock' to be held at start of each loop [-Wthread-safety-analysis]
485 | while (RAW3215_BUFFER_SIZE - raw->count < length) {
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Since [1] cond_resched() is a no-op on s390. Remove all calls.
This also entirely removes uv_call_sched() and replaces all call sites
with uv_call(), since both functions are identical after the removal
of cond_resched().
[1] commit 7dadeaa6e851 ("sched: Further restrict the preemption modes")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add SCLP Action Qualifiers used by the Spyre stack for reporting of the
card's initialization status, recoverable errors, and telemetry data.
Co-developed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records.
Cc: stable@vger.kernel.org
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
|
Detect alternate STFLE interpretive execution facility 2.
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260612-vsie-alter-stfle-fac-v4-2-74f0e1559929@linux.ibm.com>
|
|
con3270_alloc_view() allocates a staging buffer used to assemble
3270 datastream content before it is copied into channel program
requests.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Rename the memory block lookup helper to make the acquired reference
explicit, add memory_block_put() to wrap put_device(), remove
find_memory_block(), and use memory_block_get() as the single block-id
based lookup interface.
This makes it clearer to callers that a successful lookup holds a
reference that must be dropped, reducing the chance of forgetting the
matching put and leaking the memory block device reference.
Link: https://lore.kernel.org/linux-mm/7887915D-E598-42B3-9AFE-BFFBACE8DE2D@linux.dev/#t
Link: https://lore.kernel.org/20260512072635.3969576-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com> #s390
Cc: Richard Cheng <icheng@nvidia.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace symbolic permissions with octal permissions, which are preferred.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
allmodconfig with clang W=1 points out unused global variables:
drivers/s390/char/zcore.c:49:23: error: variable
'zcore_reipl_file' set but not used [-Werror,-Wunused-but-set-global]
drivers/s390/char/zcore.c:50:23: error: variable
'zcore_hsa_file' set but not used [-Werror,-Wunused-but-set-global]
Remove both of them, since there is no point in keeping them.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
allmodconfig with clang W=1 points out an unused global variable:
drivers/s390/char/sclp_vt220.c:85:12: error: variable
'sclp_vt220_buffered_chars' set but not used [-Werror,-Wunused-but-set-global]
Just remove it.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The new SCLP action qualifier 4 is used by user-space code to provide
NVMe SMART log data to the platform.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Remove the SCLP_OFB Kconfig option and enable the guarded code
unconditionally. This guards only a few lines of code, so the impact is
very low while at the same time this reduces the large number of Kconfig
options.
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The create_class() api is retiring in favor of class_register() (see:
https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/).
The HMCDRV_DEV_CLASS define is hiding a use of create_class(), but it is
permanently disabled as it is commented out. To avoid supporting code
that is disabled, the suggestion is to remove all code hiding be behind
any #ifdef HMCDRV_DEV_CLASS.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260308103255.757461-1-jkoolstra@xs4all.nl
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Recent cleanups and code consolidations in the s390 tape device driver
renamed files and function namespaces from tape_34xx to tape_3490 to
better reflect the single support of the IBM 3490E device in the
codebase.
These changes also renamed the driver name to tape_3490, which
consequently broke userspace as the sysfs driver path is now
/sys/bus/ccw/drivers/tape_3490/ instead of
/sys/bus/ccw/drivers/tape_34xx/.
Change the device driver name back to tape_34xx to fix userspace.
Fixes: 9872dae6102e ("s390/tape: Rename tape_34xx.c to tape_3490.c")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The tape device driver only supports 3490E devices on Virtual Tape Server
(VTS). There is no point in keeping separated options and modules for
different device types and general hardware support. Consolidate the tape
config option into a single option, which enables the complete tape support
with one singular module called 'tape_s390'. The corresponding module entry
points are adapted and consolidate in tape_init() and tape_exit()
respectively in tape_core.c
The current module author and descriptions of the individual tape
modules are outdated and haven't been changed for quite some time.
Change it to a more generic description that is in line with the
corresponding supported s390 architecture for the single tape module.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The driver now exclusively supports 3490 tape devices, given support for
3480 tape devices has been removed. Update the device driver name, its
source file name, and change any occurrences of "34xx/34XX" to "3490" in
the source code and comments.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Quite a few Error Recovery Action (ERA) codes and sense data entries are
not relevant anymore for the Virtual Tape Server (VTS) and are not being
used by VTS. Most of them were relevant for actual physical errors when
a tape cartridge got stuck or a tape didn't rewind properly for example.
Remove these codes from the sense data analysis as it's dead code
anyway.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The only supported device type by the Virtual Tape Server is 3490. The
3480 device type was an old physical tape model and doesn't exist
anymore. Remove 3480 from the list and any mention of it.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Quite a few command definitions are either not used or don't exist for
3490 tape devices on Virtual Tape Servers (VTS). Cleanup the list, which
makes it easier to understand what commands are actually implemented by
the driver. The lists below outline the exact reason for the removal.
Description for existing commands are adapted to reflect the removal of
support for old device types.
The following commands don't exist in VTS for 3490 devices and are
unused:
INVALID_00 0x00
DIAG_MODE_SET 0x0B
FORCE_STREAM_CNT 0xEB
LOOP_WRITE_TO_READ 0x8B
MODE_SET_C3 0xC3
MODE_SET_CB 0xCB
MODE_SET_D3 0xD3
NEW_MODE_SET 0xEB
RELEASE 0xD4
REQ_TRK_IN_ERROR 0x1B
RESERVE 0xF4
SET_DIAGNOSE 0x4B
The following command definitions are not used:
CONTROL_ACCESS 0xE3
PERF_SUBSYS_FUNC 0x77
READ_BACKWARD 0x0C
READ_BUFFER 0x12
READ_BUFF_LOG 0x24
READ_CONFIG_DATA 0xFA
READ_DEV_CHAR 0x64
READ_MESSAGE_ID 0x4E
READ_SUBSYS_DATA 0x3E
SENSE_GROUP_ID 0x34
SENSE_ID 0xE4
SET_GROUP_ID 0xAF
SET_INTERFACE_ID 0x73
SET_TAPE_WRITE_IMMED 0xC3
SUSPEND 0x5B
SYNC 0x43
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
For real 3490 tape models a logical block was composed of a direction
bit (wrap), a segment number, a format mode, and a logical block number.
This is represented in a 4byte identifier.
The Virtual Tape Server (VTS) emulates 3490 tape devices and uses a
stripped block id format where bit 0-9 of the 4byte identifier are
always 0. Bit 10-31 represent the logical block number.
All tapes use the 3480-2 XF format, which was defined via
TAPE34XX_FMT_3480_2_XF but never used. There is also no special handling
required anymore as this is the only format being used.
Since VTS doesn't require any special handling of block ids and format,
corresponding code is removed.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The LOAD_DISPLAY (LDD) X'9F' is still accepted by the Virtual Tape
Server (VTS) but does not perform any action.
Remove all functions and definitions related to this command.
The tape_34xx_ioctl() function is also removed as it was mainly used to
handle additional ioctl functionality. LOAD_DISPLAY was the only left
case. All other ioctls are handled in tapechar_ioctl().
With LOAD_DISPLAY, the remaining definitions in asm/tape390.h are gone.
Delete the file.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Physical 3590/3592 tape models are not supported anymore for a very long
time. The Virtual Tape Server (VTS) emulates and presents only 3490E
models to the host. This is the only supported model and storage server.
Remove the entire code base for 3590/3592 models as it can be considered
dead code for quite some time already.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Teach the memory hotplug path to tear down KASAN shadow that
was mapped during early boot when a memory block is offlined.
Track for each sclp_mem whether its range was covered by the early
KASAN shadow via an early_shadow_mapped flag. When such a block is
deconfigured and removed via sclp_config_mem_store(), compute the
corresponding shadow range and call vmemmap_free() to unmap the
boot mapped shadow, then clear the flag.
Using vmemmap_free() for the early shadow is safe despite the use
of large mappings in the boot-time KASAN setup. The initial shadow
is mapped with 1M and 2G pages, where possible. The minimum hotplug
memory block size is 128M and always aligned (the identity mapping
is at least 2G aligned), which corresponds to a 16M chunk of at
least 1M aligned shadow. PMD-mapped 1M shadow pages therefore
never need splitting, and PUD-mapped 2G shadow pages can now be
split following the preceding changes.
Relax the modify_pagetable() sanity check in vmem so that, with
KASAN enabled, it may also operate on the KASAN shadow region in
addition to the 1:1 mapping and vmemmap area. This allows the KASAN
shadow unmapping to reuse the common vmem helpers.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There shouldn't be any 31 bit code around anymore that matters.
Remove the compat layer support required to run 31 bit code.
Reason for removal is code simplification and reduced test effort.
Note that this comes without any deprecation warnings added to config
options, or kernel messages, since most likely those would be ignored
anyway.
If it turns out there is still a reason to keep the compat layer this
can be reverted at any time in the future.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
For now, including <asm/pgalloc.h> instead of <linux/pgalloc.h> is
technically fine unless the .c file calls p*d_populate_kernel() helper
functions.
But it is a better practice to always include <linux/pgalloc.h>. Include
<linux/pgalloc.h> instead of <asm/pgalloc.h> outside arch/.
Link: https://lkml.kernel.org/r/20251024113047.119058-3-harry.yoo@oracle.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the global kernel command line parameter
memory_hotplug.memmap_on_memory is set to false, per-memory-block
memmap_on_memory setting can still be set to true. However, when
configuring memory block, add_memory_resource() would configure it
without memmap_on_memory.
i.e.
Even if the MHP_MEMMAP_ON_MEMORY flag is set,
mhp_supports_memmap_on_memory() returns false unless the kernel command
line parameter "memory_hotplug.memmap_on_memory" is enabled. When both
the flag and the cmdline parameter are set, the memory block can be
configured with or without memmap_on_memory support.
To ensure consistent behavior, permit configuring per-memory-block
memmap_on_memory only when the memory_hotplug.memmap_on_memory kernel
command line parameter is enabled.
This is similar to commit 73954d379efd ("dax: add a sysfs knob to
control memmap_on_memory behavior")
Fixes: ff18dcb19aab ("s390/sclp: Add support for dynamic (de)configuration of memory")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Jan Höppner says:
====================
The tape device driver is limited to a block size of 65535 bytes since a
single CCW can only transfer up to 64K-1 bytes (The count field is a
16bit value). This series introduces data chaining for all read/write
functions to support block sizes larger than 65535.
The tape device type 3490 (emulated) and 3590/3592 can handle up to
256K. [1]
[1] https://www.ibm.com/docs/en/zos/3.1.0?topic=blksize-system-determined-block-size
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The tape device type 3590/3592 and emulated 3490 VTS can handle a block
size of up to 256K bytes. Currently the tape device driver is limited to
a block size of 65535 bytes (64K-1). This limitation stems from the
maximum of 65535 bytes of data that can be transferred with one
Channel-Command Word (CCW).
To work around this limitation data chaining is used which uses several
CCW to transfer an entire 256K block of data. A single CCW holds a
maximum of 65535 bytes of data.
Set MAX_BLOCKSIZE to 262144 (= 256K) to allow for data transfers with
larger block sizes. The read_block() and write_block() discipline
functions calculate the number of CCWs required based on the IDAL buffer
array size that was created for a given block size. If there is more
than one CCW required for the data transfer, the new helper function
tape_ccw_dc_idal() is used to build the data chain accordingly.
The Interruption-Repsonse Block (irb) is added to the tape_request
struct so that the tapechar_read/write() functions can analyze what data
was read or written accordingly.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
