| Age | Commit message (Collapse) | Author |
|---|
|
The Arm MPAM-Fb specification [1] describes a protocol to access MSC
registers through a firmware interface. This requires a shared memory
region to hold the message, and a mailbox to trigger the access.
For ACPI this is wrapped as a PCC channel, described using existing
ACPI abstractions.
Add code to parse those PCC table descriptions associated with an MSC,
and store the parsed information in the MSC struct.
There can be multiple PCC channels, and each channel can serve multiple
MSCs, so we need to keep track of the channel usage, using a list and
a refcount.
This will be used by the MPAM-Fb access wrapper code.
[1] https://developer.arm.com/documentation/den0144/latest
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Ritwick Sharma <ritwick.sharma@arm.com> # on Arm AGI CPU
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Tested-by: Srivathsa L Rao <srivathsa.rao@oss.qualcomm.com>
Reviewed-by: Srivathsa L Rao <srivathsa.rao@oss.qualcomm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
The Arm MPAM Firmware-backed (Fb) Profile document[1] describes an
alternative way of accessing the "Memory System Components" (MSC) in an
MPAM enabled system.
Normally the MSCs are MMIO mapped, but in some implementations this
might not be possible (MSC located outside of the local socket, MSC
mapped secure-only) or desirable (direct MMIO access too slow or needs
to be mediated through a control processor). MPAM-fb standardises a
protocol to abstract MSC accesses, building on the SCMI protocol.
Add functions that do an MSC read or write access by redirecting the
request through a firmware interface. For now this done via an ACPI
PCC shared memory and mailbox combination.
Since the protocol used is only a small subset of the full SCMI spec,
and the SCMI protocol has no full ACPI support anyway, open-code the
(simple) SCMI message generation, for just the fields we need.
[1] https://developer.arm.com/documentation/den0144/latest
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Tested-by: Ritwick Sharma <ritwick.sharma@arm.com> # on Arm AGI CPU
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Srivathsa L Rao <srivathsa.rao@oss.qualcomm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
Enough MPAM support is present to enable ARCH_HAS_CPU_RESCTRL. Let it
rip^Wlink!
ARCH_HAS_CPU_RESCTRL indicates resctrl can be enabled. It is enabled by the
arch code simply because it has 'arch' in its name.
This removes ARM_CPU_RESCTRL as a mimic of X86_CPU_RESCTRL. While here,
move the ACPI dependency to the driver's Kconfig file.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
|
|
In anticipation of MPAM being useful remove the CONFIG_EXPERT restriction.
This was done to prevent the driver being enabled before the user-space
interface was wired up.
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: Added second paragraph ]
Signed-off-by: James Morse <james.morse@arm.com>
|
|
The bitmap reset code has been a source of bugs. Add a unit test.
This currently has to be built in, as the rest of the driver is
builtin.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Probing MPAM is convoluted. MSCs that are integrated with a CPU may
only be accessible from those CPUs, and they may not be online.
Touching the hardware early is pointless as MPAM can't be used until
the system-wide common values for num_partid and num_pmg have been
discovered.
Start with driver probe/remove and mapping the MSC.
Cc: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
