| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
|
|
The netevent notifier handles neighbour updates and redirects by
queuing nfp_tun_neigh_update() on system_highpri_wq. Each work item
holds a reference to the neighbour, but only stores a pointer to the
flower app.
During device removal, nfp_tunnel_config_stop() unregisters the
notifier. This waits for notifier callbacks to return, but does not
wait for the work they queued. The teardown then frees app->priv and
app without waiting for these work items. Flushing cmsg_work in
nfp_flower_clean() does not cover the neighbour update work.
A pending work item can therefore run after the app has been freed.
Its call to nfp_flower_get_port_id_from_netdev() can then access freed
memory while checking whether the neighbour's device can be offloaded.
Even notifications for unrelated devices can reach this check. The
same problem affects shutdown and probe error paths that tear down the
app after the netevent notifier has been registered.
One possible interleaving is shown below. The neighbour belongs to
another network device that remains registered.
CPU0 (remove) CPU1 (notifier / kworker)
nfp_tun_neigh_event_handler()
queue_work(system_highpri_wq, ...)
return
/* Work has not run yet. */
nfp_tunnel_config_stop()
unregister_netevent_notifier()
/* Notifier callbacks have finished, but work may be pending. */
nfp_flower_clean()
vfree(app->priv)
app->priv = NULL
nfp_app_free()
kfree(app)
nfp_tun_neigh_update()
app = update_work->app
nfp_flower_get_port_id_from_netdev()
app->priv /* use-after-free */
The work items are allocated per event and free themselves, so they
cannot be cancelled individually, and flushing system_highpri_wq is
not allowed. Use a dedicated workqueue for neighbour updates instead.
In nfp_tunnel_config_stop(), unregister the notifier and destroy the
workqueue before cleaning up the tunnel state. This prevents new work
from being queued and waits for pending and running work to finish
while the app and its resources are still valid.
Found by code inspection.
Fixes: 0ad722bd9ee3 ("nfp: flower: fix for take a mutex lock in soft irq context and rcu lock")
Signed-off-by: Sicong Huang <congei42@163.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Miller <davem@davem-thinkpadp1gen8.ibmlond.csb>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Introduce scalar evolution (SCEV) analysis in the verifier.
It infers how registers and stack slots change in a loop and lets
the verifier check bounded loops with induction variables as ranges
instead of walking every iteration. The number of processed insns
drops ten fold in programs with loops (Eduard Zingerman)
- Add 'callx' instruction: indirect call of a static BPF subprogram.
The address is taken with ld_imm64 or loaded from read-only data.
Supported by x86-64, arm64 and riscv64 JITs (Alexei Starovoitov, Pu
Lehui)
- Add unwind_goto and unwind_exit instructions, so that Rust panic or
C++ exception can run destructors of every frame it passes through.
The normal path is free of unwind code. Supported by x86-64 and
arm64 JITs (Alexei Starovoitov)
- Support programs compiled by rust-bpf: treat load and store through
a number as arena access with BPF_F_ARENA_SCALAR, accept rust names
in BTF (Alexei Starovoitov)
- Raise BPF program stack size from 512 bytes to 2 KiB on x86-64 and
arm64 (Kumar Kartikeya Dwivedi)
- Support struct, union and __int128 up to 16 bytes passed and
returned by value in BPF subprograms and kfuncs, and fix x86-64 and
arm64 trampolines for such arguments (Yonghong Song)
- Introduce a common way to attach struct_ops to a cgroup via
bpf_link. bpf_tcp_ops is the first user and mirrors TCP sock_ops
callbacks (Martin KaFai Lau, Amery Hung)
- Describe inlined functions in BTF. New kinds tell where the inline
sites are and how to fetch the arguments there.
CONFIG_DEBUG_INFO_BTF_INLINE keeps it apart from the main BTF in
.BTF.inline section or in btf_vmlinux_inline.ko (Alan Maguire)
- Fix many memory safety, lifetime and locking bugs in BPF core,
verifier, iterators, local storage, dynptr, devmap, cpumap and
seg6local (Josef Bacik, Alexei Starovoitov)
- Diff stat is dominated by selftests and by removal of
lib/test_bpf.c. Its 16k lines of instruction tests were converted
to BPF selftests that BPF CI runs on every architecture it covers
(Daniel Borkmann)
Other features and fixes:
- Add KASAN checks to memory accesses of JITed programs on x86-64
(Alexis Lothoré)
- Complete unification of helper, kfunc and subprog argument checks
in the verifier (Amery Hung)
- Add bpf_copy_from_user_mm[_str]() kfuncs (Anastasios Papagiannis)
- Various features and fixes (Daniel Borkmann):
- Add .bpf keyring for program signature verification, modelled
after dm-verity keyring, and support ML-DSA in signing tools
- Emit shorter and faster code in x86-64 JIT for patterns that
LLVM generates
- Fix various issues in gotox handling
- Let BPF LSM set xattrs at inode creation with bpf_inode_init_xattr()
(David Windsor, Daniel Borkmann)
- Use sleepable page allocation in sleepable arena paths. Fix races
between arena free, allocation and user page fault (Emil Tsalapatis)
- Switch BPF crypto from lskcipher to AES-CBC and AES-ECB libraries
(Eric Biggers)
- Add bpf_proactive_reclaim() kfunc (Hui Zhu)
- Render decl_tags in libbpf btf_dump and add tests for bpftool C
dump (Ihor Solodrai)
- Speed up tracing_multi attach on x86 (Jiri Olsa)
- Various features and fixes (Kumar Kartikeya Dwivedi):
- Add BPF_PROG_STREAM_OPEN command to read BPF streams through a
file descriptor with poll support
- Let kernel structs publish arena pointers with __arena type tag
- Fix __uninit kfunc output buffers and fastcall rewrite with
indirect stack accesses
- Refuse CO-RE relocations for signed programs
- Add enqueue_rcvq and dequeue_rcvq hooks to bpf_tcp_ops to adjust
sk_rcvlowat and avoid unnecessary wakeups (Kuniyuki Iwashima)
- Add bpf_ksock_sendto() kfunc and allow ksock connect and send from
bpf_wq (Mahe Tardy)
- Fix racy plt target update in arm64 bpf_arch_text_poke()
(Matthew Wood)
- Restructure BPF selftests Makefile as a layered build
(Mykola Lysenko)
- Speed up hash map lookups for u32 and u64 keys (Mykyta Yatsenko)
- Add signed div/mod, movsx, bswap and gotol to MIPS JITs, signed
div/mod to parisc JITs (Nicholas Dudar, Johan Almbladh)
- Fix stack overflow in build ID parser on 32-bit (Nickolai
Zeldovich)
- Add stack arguments, signed arena loads and gotox to riscv64 JIT.
Pu Lehui is now co-maintainer of riscv BPF JITs (Pu Lehui, Chen
Pei, Feng Jiang)
- Add bpf_call_rcu() and bpf_call_rcu_tasks_trace() kfuncs. Support
fetching and/or/xor atomics in arena on x86-64 (Puranjay Mohan)
- Fix flaky selftests, selftests with clang 23 and bpf-gcc
(Qiliang Yuan, KaFai Wan, Vineet Gupta)
- Fix builds broken by fatal resolve_btfids warnings, BTF generation
on ARC, and define arch_cmpxchg_local() on arc, hexagon and
openrisc (Sasha Levin)
- Reduce memory use of hash maps by up to 50% per element
(T.J. Mercier)
- Mark pointer fields of sched_ext ops arguments as trusted (Tejun
Heo)
- Remove legacy bpf_asm, bpf_dbg and bpf_jit_disasm tools (Xia Yan)
- Fix index overflow in queue and stack maps, arena range tree after
allocation failure, tail call loop after freplace detach, lost
signal in bpf_send_signal() (Yuan Chen)
- Many more fixes and cleanups"
* tag 'bpf-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (660 commits)
selftests/bpf: Time tc_edt from its first packet with data
selftests/bpf: Test unwind_exit of an exception callback
selftests/bpf: Tests for 32-bit scalar evolution bounds computation
bpf: Reject unwind_goto and unwind_exit in offloaded progs
bpf: Support 32-bit linear scalar evolution
bpf: Make unwind_exit of an exception callback exit in JITs
selftests/bpf: Test forbidden bpf_ksock_sendto() LSM attach
selftests/bpf: Test ksock sendto()
bpf: Add bpf_ksock_sendto() kfunc
selftests/bpf: Test unwinding from R0: R2 subprog
selftests/bpf: Add a C++ prog with exceptions
selftests/bpf: Add tests for unwind_goto and unwind_exit
bpf, arm64: Support unwind_goto and unwind_exit
bpf, x86: Support unwind_goto and unwind_exit
bpf: Add unwind_goto and unwind_exit insns
tools/bpf: Remove legacy BPF tools
bpf: Annotate data races on bpf_lru_node type
selftests/bpf: Add arena allocation race tests
bpf: Fix arena race between page free and alloc leading to incoherency
bpf: Revalidate faulted arena pages before installing user mappings
...
|
|
The IEEE 802.1Qaz standard defines that bandwidth allocation percentages
only apply to ETS traffic classes. Reject ETS configurations that
specify non-zero bandwidth for non-ETS traffic classes.
Placing this check in dcbnl_ieee_set() enforces the constraint uniformly
for all drivers rather than relying on each driver to validate it
independently.
Drop the equivalent check from NFP's dcb_ets_check(). Keep ETS
bandwidth-sum validation unchanged.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20261011083929.739261-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is error-prone to require callers to fetch netns and
neigh_table and pass it with dev to neigh_lookup(), etc.
Let's replace neigh_lookup() and friends with IPv4 helpers.
Note that __neigh_lookup(create=false) is replaced with
ipv4_neigh_lookup() and __neigh_lookup(create=true) and
__neigh_lookup_errno() are split into ipv4_neigh_lookup()
and ipv4_neigh_create().
Fixes: 2430df635a59 ("ipv4: Replace &arp_tbl with arp_table(net).")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20261003212336.1304988-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below in neigh_mark_dead() [0]
where tbl->lock was not held while neigh_ifdown() should
have acquired one.
This only happens when a neigh_table accidentally has a
neighbour from a different netns.
In ip6_finish_output2(), the net argument is the caller's and
does not always match dev_net(dev) fetched from dst. (e.g. xfrm)
It is error-prone to require callers to fetch netns and
neigh_table and pass it with dev to neigh_lookup(), etc.
Let's replace neigh_lookup() and friends with IPv6 helpers.
Note that __neigh_lookup() is split into ipv6_neigh_lookup()
and ipv6_neigh_create().
[0]:
debug_locks && !(lock_is_held(&(&n->tbl->lock)->dep_map) != 0)
WARNING: net/core/neighbour.c:154 at neigh_mark_dead+0x2fb/0x340 net/core/neighbour.c:154, CPU#0: syz.0.857/9765
Modules linked in:
CPU: 0 UID: 0 PID: 9765 Comm: syz.0.857 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
RIP: 0010:neigh_mark_dead+0x2fb/0x340 net/core/neighbour.c:154
Code: e8 03 42 80 3c 28 00 74 08 48 89 df e8 ee 9a 80 f8 4c 89 33 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 86 95 10 f8 90 <0f> 0b 90 e9 8f fd ff ff 48 c7 c1 80 9a 7a 90 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003726600 EFLAGS: 00010287
RAX: ffffffff89b7467a RBX: ffff888022e86000 RCX: 0000000000080000
RDX: ffffc900047fa000 RSI: 0000000000003e08 RDI: 0000000000003e09
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000004
R10: dffffc0000000000 R11: fffff520006e4cb8 R12: ffff888022e8613c
R13: dffffc0000000000 R14: ffff888022e86020 R15: ffff888022e86000
FS: 00007f9c30f046c0(0000) GS:ffff888124cc6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000076c56000 CR4: 00000000003526f0
Call Trace:
<TASK>
neigh_flush_one+0x27c/0x5a0 net/core/neighbour.c:388
neigh_flush_dev net/core/neighbour.c:432 [inline]
__neigh_ifdown+0x1fb/0xc70 net/core/neighbour.c:465
neigh_ifdown+0x1f/0x30 net/core/neighbour.c:487
rt6_disable_ip+0x751/0x7e0 net/ipv6/route.c:5058
addrconf_ifdown+0x155/0x1ad0 net/ipv6/addrconf.c:3892
addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1
notifier_call_chain+0x1a5/0x3d0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2350 [inline]
netif_set_mtu_ext+0x5ac/0x830 net/core/dev.c:9963
do_setlink+0xa81/0x47a0 net/core/rtnetlink.c:3247
rtnl_setlink+0x578/0x820 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7159
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800
__sock_sendmsg net/socket.c:815 [inline]
sock_write_iter+0x2de/0x3e0 net/socket.c:1266
do_iter_readv_writev+0x612/0x8c0 fs/read_write.c:-1
vfs_writev+0x343/0x990 fs/read_write.c:1058
do_writev+0x154/0x2e0 fs/read_write.c:1104
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f9c2ff9e159
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9c30f04028 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f9c30225fa0 RCX: 00007f9c2ff9e159
RDX: 0000000000000001 RSI: 00002000000003c0 RDI: 0000000000000004
RBP: 00007f9c3003506b R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f9c30226038 R14: 00007f9c30225fa0 R15: 00007ffed3c74808
</TASK>
Fixes: df5f4f372de5 ("ipv6: Replace &nd_tbl with nd_table(net).")
Reported-by: syzbot+5a8857f0b4a0a7b12c62@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6abd69a9.80e1c6cc.22483f.0005.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20261003212336.1304988-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nfp_ct_do_nft_merge() inserts nft_m_entry into nft_merge_tb and
increments nft_merge_count before calling nfp_fl_ct_add_offload(). If
that call fails, the error path removes the entry from its lists and
frees it, but leaves the hash entry and count behind.
Remove the hash entry and undo the count increment before freeing
nft_m_entry.
Cc: stable+noautosel@kernel.org # untested fix to unlikely driver error path
Fixes: a87ceb3d42af ("nfp: flower: offload tc flows of multiple conntrack zones")
Reported-by: Changyul Lee <lcy8047@gmail.com>
Signed-off-by: Sang-Hoon Choi <csh0052@gmail.com>
Link: https://patch.msgid.link/20261003.final049.214b9988b1e1f0a7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Conflicts:
arch/arm64/net/bpf_jit_comp.c
arch/x86/net/bpf_jit_comp.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.3-rc5).
Conflicts:
drivers/net/mdio/mdio-realtek-rtl9300.c
89a8a1eef2d44 ("net: mdio: realtek-rtl9300: fix RTL931x C22 extended page selection")
cc3cb8db1eef9 ("net: mdio: realtek-rtl9300: Add page tracking")
https://lore.kernel.org/arUZOqy73bE2pp0w@sirena.org.uk
net/8021q/vlan_dev.c
cd5dd68267c4 ("vlan: ensure sufficient headroom in vlan_dev_hard_header()")
ca6ff8dd70eb ("vlan: annotate data-races in vlan_dev_priv fields")
Adjacent changes:
net/ipv6/ip6_gre.c
dd47bcf279f1 ("ip6_gre: Call ip6erspan_tunnel_unlink_md() in ip6erspan_changelink().")
cce829e2aa1d ("ip6_gre: Protect ip6gre_net.tunnels[][] with mutex.")
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c
b5d9e9d4d0c1 ("eth: fbnic: use the Rx queue napi pointer to find the napi vector")
c0aca269ec07 ("eth: fbnic: Make Rx completion coalescing configurable")
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
d68acbf93531 ("net: stmmac: selftests: Support running selftests on DSA conduits")
85ca3292d7a3 ("net: stmmac: Remove ARP offload code")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
3173cba11701 ("net: libwx: fix races in Tx timestamp handling")
7042c8c193e5 ("net: libwx: rename wx_pf_flags to wx_flags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The verifier indexes a frame's stack state directly through
state->stack[spi] and computes the number of tracked slots as
allocated_stack / BPF_REG_SIZE in every file that touches stack slots,
and so does the nfp offload driver. Route all of these through two
helpers, bpf_stack_slot() and bpf_stack_nr_slots(), so the layout of the
per-frame stack state is visible in one place. The one lookup that goes
the other way, reg_to_target() in the diagnostics code, maps a register
pointer back to its slot by address and now says that it relies on the
slots forming one contiguous array. Both helpers take a const frame: the
slot accessor returns the slot through the frame's stack pointer, so
read-only code such as the state printer can use it without giving up
its qualifiers. Functions that look up the same slot repeatedly now
fetch it once.
No functional change.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20260924165740.2146806-2-memxor@gmail.com
|
|
nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the
xfrm_state it found. The delete path can erase the entry and drop the last
state reference in that interval. RX can then try to increment a zero
refcount after the state has been queued for destruction.
The driver queues firmware invalidation asynchronously; the delete path
does not wait for the command to complete or drain pending RX processing.
The XFRM garbage collector waits for an RCU grace period before freeing
the state. That delays reclamation but does not make acquiring a reference
from zero valid.
Take the xfrm_state reference before releasing the XArray lock so
xa_erase() cannot run between lookup and reference acquisition.
Fixes: 57f273adbcd4 ("nfp: add framework to support ipsec offloading")
Reported-by: Changyul Lee <lcy8047@gmail.com>
Signed-off-by: Sang-Hoon Choi <csh0052@gmail.com>
Link: https://patch.msgid.link/179001455912.44752.17153022439349797877.idr-bug-92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.3-rc3).
Conflicts:
drivers/net/dsa/mt7530.c
3c18e3c9a54e ("net: dsa: mt7530: populate lpi_interfaces to fix EEE support")
10d9d8328e8a ("net: dsa: mt7530: replace mt7530_read with regmap_read")
Adjacent changes:
drivers/net/bonding/bond_alb.c
1746ef2e2df2 ("bonding: use skb_cow_head() in bond_do_alb_xmit() and rlb_arp_xmit()")
4cef95f72bbd ("bonding: fix u32 overflow in compute_gap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nfp_net_fs_add() replaces an existing rule by deleting it from the
hardware, decrementing nn->fs.count and programming the new one. If
nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the
success path reaches list_replace() - so the list is one longer than
nn->fs.count, and it advertises a rule whose hardware entry has already
been torn down.
nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes
its buffer one entry short of what the GRXCLSRLALL walk wants to write.
That used to overwrite one u32 past the allocation; since the walk is
bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the
counter.
Fixes: 9eb03bb1c035 ("nfp: add ethtool flow steering callbacks")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260903032611.3000029-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[]
without consulting cmd->rule_cnt, which is how many entries the caller
had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the
ioctl sizes the buffer from the rule_cnt userspace passes in, so once an
admin has installed flow steering rules any user can ask for fewer slots
than there are rules and run off the end of the allocation. A rule_cnt
of 0 leaves the buffer pointer NULL and the walk dereferences it.
Bail out with -EMSGSIZE when the buffer fills up, the way the other
ntuple capable drivers do, and report how many locations were filled so
a shrinking rule list does not leave the caller reading stale slots.
Reported-by: VEGA <vega@nebusec.ai>
Fixes: 9eb03bb1c035 ("nfp: add ethtool flow steering callbacks")
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260903032611.3000029-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will allocate per-netns neigh_table in net->neigh_tables[].
Let's replace &nd_tbl with nd_table(net).
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260902203722.926528-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will allocate per-netns neigh_table in net->neigh_tables[].
Let's replace &arp_tbl with arp_table(net) and remove extern
definition for arp_tbl.
Three notes:
1. mlx5e_rep_netevent_event() and nfp_tun_neigh_event_handler()
have code assuming neigh_table other than &arp_tbl and
&nb_tbl, and the part is removed as it will be false once
per-netns table is allocated.
2. prestera and rocker uses init_net because they set
dev->netns_immutable to true.
3. mlx5e_tc_update_neigh_used_value() dereferences nhe->neigh_dev
in trace_mlx5e_tc_update_neigh_used_value().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260902203722.926528-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nfp_cpp_resource_find() allocates a CPP mutex handle for the matching
resource-table entry and then reports success. nfp_resource_try_acquire()
immediately passes that handle to nfp_cpp_mutex_trylock().
However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens
for a matching table entry, the resource lookup still returns success and
the following trylock dereferences a NULL mutex pointer while opening the
resource.
nfp_resource_acquire() already treats failure to allocate the table mutex
as -ENOMEM. Do the same for the resource mutex and fail the lookup before
publishing the rest of the resource handle.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: f01a2161577d ("nfp: add support for resources")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708143408.3168425-1-ruoyuw560@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
|
union devlink_param_value grows substantially once U64 array
parameters are added to devlink (from 32 bytes to over 264 bytes).
devlink_nl_param_value_fill_one() and devlink_nl_param_value_put()
copy the union by value in several places. Passing two instances as
value arguments alone consumes over 528 bytes of stack; combined with
deeper call chains the parameter stack can approach 800 bytes and trip
CONFIG_FRAME_WARN more easily.
Switch internal helpers and exported driver APIs to pass pointers to
union devlink_param_value rather than passing the union by value.
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com> #for ena
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260521095303.2395584-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by one
the PCI_DEVICE macros and then list expressions. The latter isn't easily
readable if you're not into PCI. Using named initializers is more
explicit and thus easier to parse.
Also use PCI_DEVICE* helper macros to assign .vendor, .device,
.subvendor and .subdevice where appropriate and skip explicit
assignments of 0 (which the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2)
Reviewed-by: Michael Grzeschik <mgr@kernel.org>
Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With .class_mask being zero the value of .class doesn't matter because
to check if a pci_device_id entry matches a given device the expression
(id->class ^ dev->class) & id->class_mask
is checked for being zero (see pci_match_one_device()). So drop the
useless and irritating assignment for .class to match what (I think) all
other drivers are doing that don't need to match on .class, i.e. set
both members to zero.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260511090023.1634387-5-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace direct access to bpf_reg_state->{smin,smax,umin,umax,
s32_min,s32_max,u32_min,u32_max}_value with getter/setter inline
functions, preparing for future switch to cnum-based internal
representation.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260424-cnums-everywhere-rfc-v1-v3-2-ca434b39a486@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is a mismatch between the passed arguments and the actual
nfp_encode_basic_qdr() function parameter names:
static int nfp_encode_basic_qdr(u64 addr, int dest_island, int cpp_tgt,
int mode, bool addr40, int isld1,
int isld0)
{
...
But "dest_island" and "cpp_tgt" are swapped at every call-site.
For example:
return nfp_encode_basic_qdr(*addr, cpp_tgt, dest_island,
mode, addr40, isld1, isld0);
As a result, nfp_encode_basic_qdr() receives "dest_island" as CPP target
type, which is always NFP_CPP_TARGET_QDR(2) for these calls, and "cpp_tgt"
as the destination island ID, which can accidentally match or be outside
the valid NFP_CPP_TARGET_* types (e.g. '-1' for any destination).
Since code already worked for years, also add extra pr_warn() to error
paths in nfp_encode_basic_qdr() to help identify any potential address
verification failures.
Detected using the static analysis tool - Svace.
Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Link: https://patch.msgid.link/20260422160536.61855-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert all drivers currently utilizing ipv6_stub to make direct
function calls. The fallback functions introduced previously will
prevent linkage errors when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260325120928.15848-7-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge trees after 7.0-rc1.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Previous commit changed BPF verifier to track pointer offsets entirely
in bpf_reg_state->var_off. This commit removes references to
bpf_reg_state->off in netronome code.
- In most of the places `.off` field is used as a part of a sum:
`reg->off + reg->var_off.value`. In such code the `reg->off` addend
is removed.
- Function jit.c:cross_mem_access() uses `.off` but ignores `.var_off`
to compute memory access offset. Here access to `.off` is replaced
with access to `.var_off.value`. verifier.c:nfp_bpf_check_ptr()
rejects programs for which !tnum_is_const(reg->var_off),
so the above change will read a valid constant.
Not sure why `.var_off` was ignored in this function previously.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-3-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260122-grxring_big_v4-v2-3-94dbe4dcaa10@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `struct_group_tagged()` helper
to separate the flexible array from the rest of the members in the
flexible structure. We then use the newly created tagged `struct
nfp_crypto_req_add_front_hdr` to replace the type of the objects
causing trouble in a couple of structures.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
Lastly, use container_of() to retrieve a pointer to the flexible
structure and, through that, access the flexible-array member when
needed.
So, with these changes, fix the following warnings:
drivers/net/ethernet/netronome/nfp/nfd3/../crypto/fw.h:58:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/ethernet/netronome/nfp/nfd3/../crypto/fw.h:65:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aSfDqouLFcA4h8JX@kspp
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Allow devlink_param::get() handlers to report error messages via
extack. This function is called in a few different contexts, but not
all of them will have an valid extack to use.
When devlink_param::get() is called from param_get_doit or
param_get_dumpit contexts, pass the extack through so that drivers can
report errors when retrieving param values. devlink_param::get() is
called from the context of devlink_param_notify(), pass NULL in for
the extack.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In nfp_net_alloc(), the memory allocated for xsk_pools is not freed in
the subsequent error paths, leading to a memory leak. Fix that by
freeing it in the error path.
Fixes: 6402528b7a0b ("nfp: xsk: add AF_XDP zero-copy Rx and Tx support")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251028160845.126919-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc8).
Conflicts:
tools/testing/selftests/drivers/net/bonding/Makefile
87951b566446 selftests: bonding: add test for passive LACP mode
c2377f1763e9 selftests: bonding: add test for LACP actor port priority
Adjacent changes:
drivers/net/ethernet/cadence/macb.h
fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf169e net: macb: Add TAPRIO traffic scheduling support
drivers/net/ethernet/cadence/macb_main.c
fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf169e net: macb: Add TAPRIO traffic scheduling support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The nfp_net_get_rxfh_key_size() function returns -EOPNOTSUPP when
devices don't support RSS, and callers treat the negative value as a
large positive value since the return type is u32.
Return 0 when devices don't support RSS, aligning with the ethtool
interface .get_rxfh_key_size() that requires returning 0 in such cases.
Fixes: 9ff304bfaf58 ("nfp: add support for reporting CRC32 hash function")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929054230.68120-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly
request the use of the per-CPU behavior. Both flags coexist for one release
cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These socket lookup functions required struct inet_hashinfo because
they are shared by TCP and DCCP.
* __inet_lookup_established()
* __inet_lookup_listener()
* __inet6_lookup_established()
* inet6_lookup_listener()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the above
4 functions.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove array_size() calls and replace vmalloc() with vmalloc_array() in
nfp_flower_metadata_init(). vmalloc_array() is also optimized better,
resulting in less instructions being used.
Place 'NFP_FL_STATS_ELEM_RS' with the sizeof() parameter as the second
argument to vmalloc_array() to avoid -Wcalloc-transposed-args compilation
warnings.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250816090659.117699-3-rongqianfeng@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This place is fetching the stats, u64_stats_update_begin()/end()
should not be used, and the fetcher of stats is in the same
context as the updater of the stats, so don't need any protection
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20250815015619.2713-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
Just turn nfp_tx_q_show() into a wrapper for helper that gets
told whether it's tx or xdp via an explicit argument and have
nfp_xdp_q_show() call the underlying helper instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20250702212205.GF3406663@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Acked-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20250618203823.1336156-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
