summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_main.c
AgeCommit message (Collapse)Author
2026-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-7.1-rc4). No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-12net: Consistently define pci_device_ids using named initializersUwe Kleine-König (The Capable Hub)
... and PCI device helpers. The various struct pci_device_id arrays were initialized mostly by one the PCI_DEVICE macros and then list expressions. The latter isn't easily readable if you're not into PCI. Using named initializers is more explicit and thus easier to parse. Also use PCI_DEVICE* helper macros to assign .vendor, .device, .subvendor and .subdevice where appropriate and skip explicit assignments of 0 (which the compiler takes care of). The secret plan is to make struct pci_device_id::driver_data an anonymous union (similar to https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/) and that requires named initializers. But it's also a nice cleanup on its own. This change doesn't introduce changes to the compiled pci_device_id arrays. Tested on x86 and arm64. Reviewed-by: Jijie Shao <shaojijie@huawei.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2) Reviewed-by: Michael Grzeschik <mgr@kernel.org> Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-08i40e: Cleanup PTP pins on probe failureMatt Vollrath
PTP pin structs are allocated early in probe, but never cleaned up. Fix this by calling i40e_ptp_free_pins in the error path. To support this, i40e_ptp_free_pins is added to the header and pin_config is correctly nullified after being freed. This has been an issue since i40e_ptp_alloc_pins was introduced. Fixes: 1050713026a08 ("i40e: add support for PTP external synchronization clock") Reported-by: Kohei Enju <kohei@enjuk.jp> Cc: stable@vger.kernel.org Signed-off-by: Matt Vollrath <tactii@gmail.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Kohei Enju <kohei@enjuk.jp> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-2-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-08i40e: Cleanup PTP registration on probe failureMatt Vollrath
Fix two conditions which would leak PTP registration on probe failure: 1. i40e_setup_pf_switch can encounter an error in i40e_setup_pf_filter_control, call i40e_ptp_init, then return non-zero, sending i40e_probe to err_vsis. 2. i40e_setup_misc_vector can return non-zero, sending i40e_probe to err_vsis. Both of these conditions have been present since PTP was introduced in this driver. Found with coccinelle. Fixes: beb0dff1251db ("i40e: enable PTP") Signed-off-by: Matt Vollrath <tactii@gmail.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-1-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-18i40e: don't advertise IFF_SUPP_NOFCSKohei Enju
i40e advertises IFF_SUPP_NOFCS, allowing users to use the SO_NOFCS socket option. However, this option is silently ignored, as the driver does not check skb->no_fcs, and always enables FCS insertion offload. Fix this by removing the advertisement of IFF_SUPP_NOFCS. This behavior can be reproduced with a simple AF_PACKET socket: import socket s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW) s.setsockopt(socket.SOL_SOCKET, 43, 1) # SO_NOFCS s.bind(("eth0", 0)) s.send(b'\xff' * 64) Previously, send() succeeds but the driver ignores SO_NOFCS. With this change, send() fails with -EPROTONOSUPPORT, as expected. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Kohei Enju <kohei@enjuk.jp> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-9-686c33c9828d@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-05i40e: use xdp.frame_sz as XDP RxQ info frag_sizeLarysa Zaremba
The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead of DMA write size. Different assumptions in i40e driver configuration lead to negative tailroom. Set frag_size to the same value as frame_sz in shared pages mode, use new helper to set frag_size when AF_XDP ZC is active. Fixes: a045d2f2d03d ("i40e: set xdp_rxq_info::frag_size") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-05i40e: fix registering XDP RxQ infoLarysa Zaremba
Current way of handling XDP RxQ info in i40e has a problem, where frag_size is not updated when xsk_buff_pool is detached or when MTU is changed, this leads to growing tail always failing for multi-buffer packets. Couple XDP RxQ info registering with buffer allocations and unregistering with cleaning the ring. Fixes: a045d2f2d03d ("i40e: set xdp_rxq_info::frag_size") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-12net: intel: fix PCI device ID conflict between i40e and ipw2200Ethan Nelson-Moore
The ID 8086:104f is matched by both i40e and ipw2200. The same device ID should not be in more than one driver, because in that case, which driver is used is unpredictable. Fix this by taking advantage of the fact that i40e devices use PCI_CLASS_NETWORK_ETHERNET and ipw2200 devices use PCI_CLASS_NETWORK_OTHER to differentiate the devices. Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards") Cc: stable@vger.kernel.org Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20260210021235.16315-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30i40e: drop udp_tunnel_get_rx_info() call from i40e_open()Mohammad Heib
The i40e driver calls udp_tunnel_get_rx_info() during i40e_open(). This is redundant because UDP tunnel RX offload state is preserved across device down/up cycles. The udp_tunnel core handles synchronization automatically when required. Furthermore, recent changes in the udp_tunnel infrastructure require querying RX info while holding the udp_tunnel lock. Calling it directly from the ndo_open path violates this requirement, triggering the following lockdep warning: Call Trace: <TASK> ? __udp_tunnel_nic_assert_locked+0x39/0x40 [udp_tunnel] i40e_open+0x135/0x14f [i40e] __dev_open+0x121/0x2e0 __dev_change_flags+0x227/0x270 dev_change_flags+0x3d/0xb0 devinet_ioctl+0x56f/0x860 sock_do_ioctl+0x7b/0x130 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x90/0x170 ... </TASK> Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from i40e_open() resolve the locking violation. Fixes: 1ead7501094c ("udp_tunnel: remove rtnl_lock dependency") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-12-27Merge branch '40GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-12-17 (i40e, iavf, idpf, e1000) For i40e: Przemyslaw immediately schedules service task following changes to filters to ensure timely setup for PTP. Gregory Herrero adjusts VF descriptor size checks to be device specific. For iavf: Kohei Enju corrects a couple of condition checks which caused off-by-one issues. For idpf: Larysa fixes LAN memory region call to follow expected requirements. Brian Vazquez reduces mailbox wait time during init to avoid lengthy delays. For e1000: Guangshuo Li adds validation of data length to prevent out-of-bounds access. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000: fix OOB in e1000_tbi_should_accept() idpf: reduce mbx_task schedule delay to 300us idpf: fix LAN memory regions command on some NVMs iavf: fix off-by-one issues in iavf_config_rss_reg() i40e: validate ring_len parameter against hardware-specific values i40e: fix scheduling in set_rx_mode ==================== Link: https://patch.msgid.link/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-17i40e: fix scheduling in set_rx_modePrzemyslaw Korba
Add service task schedule to set_rx_mode. In some cases there are error messages printed out in PTP application (ptp4l): ptp4l[13848.762]: port 1 (ens2f3np3): received SYNC without timestamp ptp4l[13848.825]: port 1 (ens2f3np3): received SYNC without timestamp ptp4l[13848.887]: port 1 (ens2f3np3): received SYNC without timestamp This happens when service task would not run immediately after set_rx_mode, and we need it for setup tasks. This service task checks, if PTP RX packets are hung in firmware, and propagate correct settings such as multicast address for IEEE 1588 Precision Time Protocol. RX timestamping depends on some of these filters set. Bug happens only with high PTP packets frequency incoming, and not every run since sometimes service task is being ran from a different place immediately after starting ptp4l. Fixes: 0e4425ed641f ("i40e: fix: do not sleep in netdev_ops") Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-11-24treewide: Drop pci_save_state() after pci_restore_state()Lukas Wunner
In 2009, commit c82f63e411f1 ("PCI: check saved state before restore") changed the behavior of pci_restore_state() such that it became necessary to call pci_save_state() afterwards, lest recovery from subsequent PCI errors fails. The commit has just been reverted and so all the pci_save_state() after pci_restore_state() calls that have accumulated in the tree are now superfluous. Drop them. Two drivers chose a different approach to achieve the same result: drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the pci_dev's "state_saved" flag to true before calling pci_restore_state(). Drop this as well. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
2025-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.17-rc8). Conflicts: drivers/net/can/spi/hi311x.c 6b6968084721 ("can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled") 27ce71e1ce81 ("net: WQ_PERCPU added to alloc_workqueue users") https://lore.kernel.org/72ce7599-1b5b-464a-a5de-228ff9724701@kernel.org net/smc/smc_loopback.c drivers/dibs/dibs_loopback.c a35c04de2565 ("net/smc: fix warning in smc_rx_splice() when calling get_page()") cc21191b584c ("dibs: Move data path to dibs layer") https://lore.kernel.org/74368a5c-48ac-4f8e-a198-40ec1ed3cf5f@kernel.org Adjacent changes: drivers/net/dsa/lantiq/lantiq_gswip.c c0054b25e2f1 ("net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()") 7a1eaef0a791 ("net: dsa: lantiq_gswip: support model-specific mac_select_pcs()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-22net: WQ_PERCPU added to alloc_workqueue usersMarco Crivellari
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly request the use of the per-CPU behavior. Both flags coexist for one release cycle to allow callers to transition their calls. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. All existing users have been updated accordingly. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-18i40e: improve VF MAC filters accountingLukasz Czapnik
When adding new VM MAC, driver checks only *active* filters in vsi->mac_filter_hash. Each MAC, even in non-active state is using resources. To determine number of MACs VM uses, count VSI filters in *any* state. Add i40e_count_all_filters() to simply count all filters, and rename i40e_count_filters() to i40e_count_active_filters() to avoid ambiguity. Fixes: cfb1d572c986 ("i40e: Add ensurance of MacVlan resources for every trusted VF") Cc: stable@vger.kernel.org Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-09i40e: fix Jumbo Frame support after iPXE bootJacob Keller
The i40e hardware has multiple hardware settings which define the Maximum Frame Size (MFS) of the physical port. The firmware has an AdminQ command (0x0603) to configure the MFS, but the i40e Linux driver never issues this command. In most cases this is no problem, as the NVM default value has the device configured for its maximum value of 9728. Unfortunately, recent versions of the iPXE intelxl driver now issue the 0x0603 Set Mac Config command, modifying the MFS and reducing it from its default value of 9728. This occurred as part of iPXE commit 6871a7de705b ("[intelxl] Use admin queue to set port MAC address and maximum frame size"), a prerequisite change for supporting the E800 series hardware in iPXE. Both the E700 and E800 firmware support the AdminQ command, and the iPXE code shares much of the logic between the two device drivers. The ice E800 Linux driver already issues the 0x0603 Set Mac Config command early during probe, and is thus unaffected by the iPXE change. Since commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set"), the i40e driver does check the I40E_PRTGL_SAH register, but it only logs a warning message if its value is below the 9728 default. This register also only covers received packets and not transmitted packets. A warning can inform system administrators, but does not correct the issue. No interactions from userspace cause the driver to write to PRTGL_SAH or issue the 0x0603 AdminQ command. Only a GLOBR reset will restore the value to its default value. There is no obvious method to trigger a GLOBR reset from user space. To fix this, introduce the i40e_aq_set_mac_config() function, similar to the one from the ice driver. Call this during early probe to ensure that the device configuration matches driver expectation. Unlike E800, the E700 firmware also has a bit to control whether the MAC should append CRC data. It is on by default, but setting a 0 to this bit would disable CRC. The i40e implementation must set this bit to ensure CRC will be appended by the MAC. In addition to the AQ command, instead of just checking the I40E_PRTGL_SAH register, update its value to the 9728 default and write it back. This ensures that the hardware is in the expected state, regardless of whether the iPXE (or any other early boot driver) has modified this state. This is a better user experience, as we now fix the issues with larger MTU instead of merely warning. It also aligns with the way the ice E800 series driver works. A final note: The Fixes tag provided here is not strictly accurate. The issue occurs as a result of an external entity (the iPXE intelxl driver), and this is not a regression specifically caused by the mentioned change. However, I believe the original change to just warn about PRTGL_SAH being too low was an insufficient fix. Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Link: https://github.com/ipxe/ipxe/commit/6871a7de705b6f6a4046f0d19da9bcd689c3bc8e Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-09-09i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error pathMichal Schmidt
If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration later than the first, the error path wants to free the IRQs requested so far. However, it uses the wrong dev_id argument for free_irq(), so it does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: <TASK> free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Use the same dev_id for free_irq() as for request_irq(). I tested this with inserting code to fail intentionally. Fixes: 493fb30011b3 ("i40e: Move q_vectors from pointer to array to array of pointers") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24i40e: use libie_aq_strMichal Swiatkowski
There is no need to store the err string in hw->err_str. Simplify it and use common helper. hw->err_str is still used for other purpouse. It should be marked that previously for unknown error the numeric value was passed as a string. Now the "LIBIE_AQ_RC_UNKNOWN" is used for such cases. Add libie_aminq module in i40e Kconfig. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24i40e: use libie adminq descriptorsMichal Swiatkowski
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow clean build. Get version descriptor is a little less detailed on i40e. To not mess up with shifting or union inside libie desc use get version descriptor from i40e. Move additional caps for i40e to libie. Fix RCT in declaration that is using libie_aq_desc; Use libie_aq_raw() wherever it can be used. The libie aq error is extended, cover it in ice driver just to clean build. In next patches the libie code for that will be used in each of intel driver. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-03i40e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean
New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert the Intel i40e driver to the new API, so that timestamping configuration can be removed from the ndo_eth_ioctl() path completely. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Milena Olech <milena.olech@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-18udp_tunnel: remove rtnl_lock dependencyStanislav Fomichev
Drivers that are using ops lock and don't depend on RTNL lock still need to manage it because udp_tunnel's RTNL dependency. Introduce new udp_tunnel_nic_lock and use it instead of rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to grab udp_tunnel_nic_lock mutex and might sleep). Cover more places in v4: - netlink - udp_tunnel_notify_add_rx_port (ndo_open) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_notify_del_rx_port (ndo_stop) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_get_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - udp_tunnel_drop_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_DROP_INFO - udp_tunnel_nic_reset_ntf (ndo_open) - notifiers - udp_tunnel_nic_netdevice_event, depending on the event: - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - triggers NETDEV_UDP_TUNNEL_DROP_INFO - ethnl_tunnel_info_reply_size - udp_tunnel_nic_set_port_priv (two intel drivers) Cc: Michael Chan <michael.chan@broadcom.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc2). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09i40e: add link_down_events statisticDawid Osuchowski
Introduce a link_down_events counter to the i40e driver, incremented each time the link transitions from up to down. This counter can help diagnose issues related to link stability, such as port flapping or unexpected link drops. The value is exposed via ethtool's get_link_ext_stats() interface. Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-09net: intel: move RSS packet classifier types to libieJacob Keller
The Intel i40e, iavf, and ice drivers all include a definition of the packet classifier filter types used to program RSS hash enable bits. For i40e, these bits are used for both the PF and VF to configure the PFQF_HENA and VFQF_HENA registers. For ice and iAVF, these bits are used to communicate the desired hash enable filter over virtchnl via its struct virtchnl_rss_hashena. The virtchnl.h header makes no mention of where the bit definitions reside. Maintaining a separate copy of these bits across three drivers is cumbersome. Move the definition to libie as a new pctype.h header file. Each driver can include this, and drop its own definition. The ice implementation also defined a ICE_AVF_FLOW_FIELD_INVALID, intending to use this to indicate when there were no hash enable bits set. This is confusing, since the enumeration is using bit positions. A value of 0 *should* indicate the first bit. Instead, rewrite the code that uses ICE_AVF_FLOW_FIELD_INVALID to just check if the avf_hash is zero. From context this should be clear that we're checking if none of the bits are set. The values are kept as bit positions instead of encoding the BIT_ULL directly into their value. While most users will simply use BIT_ULL immediately, i40e uses the macros both with BIT_ULL and test_bit/set_bit calls. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-09net: intel: rename 'hena' to 'hashcfg' for clarityJacob Keller
i40e, ice, and iAVF all use 'hena' as a shorthand for the "hash enable" configuration. This comes originally from the X710 datasheet 'xxQF_HENA' registers. In the context of the registers the meaning is fairly clear. However, on its own, hena is a weird name that can be more difficult to understand. This is especially true in ice. The E810 hardware doesn't even have registers with HENA in the name. Replace the shorthand 'hena' with 'hashcfg'. This makes it clear the variables deal with the Hash configuration, not just a single boolean on/off for all hashing. Do not update the register names. These come directly from the datasheet for X710 and X722, and it is more important that the names can be searched. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-01-07i40e: add ability to reset VF for Tx and Rx MDD eventsAleksandr Loktionov
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs. This flag is also used in other network adapters like ICE. Usage: - "on" - The problematic VF will be automatically reset if a malformed descriptor is detected. - "off" - The problematic VF will be disabled. In cases where a VF sends malformed packets classified as malicious, it can cause the Tx queue to freeze, rendering it unusable for several minutes. When an MDD event occurs, this new implementation allows for a graceful VF reset to quickly restore operational state. Currently, VF queues are disabled if an MDD event occurs. This patch adds the ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD event logging throttling to avoid dmesg pollution and unifies the format of Tx and Rx MDD messages. Note: Standard message rate limiting functions like dev_info_ratelimited() do not meet our requirements. Custom rate limiting is implemented, please see the code for details. Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com> Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_commit_partition_bw_settingDr. David Alan Gilbert
i40e_commit_partition_bw_setting() was added in 2017 by commit 4fc8c6763957 ("i40e: genericize the partition bandwidth control") but hasn't been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-8-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_del_filterDr. David Alan Gilbert
The last use of i40e_del_filter() was removed in 2016 by commit 9569a9a4547d ("i40e: when adding or removing MAC filters, correctly handle VLANs") Remove it. Fix up a comment that referenced it. Note: The __ version of this function is still used. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-7-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06i40e: Remove unused i40e_get_cur_guaranteed_fd_countDr. David Alan Gilbert
The last use of i40e_get_cur_guaranteed_fd_count() was removed in 2015 by commit 04294e38a451 ("i40e: FD filters flush policy changes") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250102173717.200359-6-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-04i40e: fix race condition by adding filter's intermediate sync stateAleksandr Loktionov
Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN. 1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption. Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX". Exact code for stable reproduction Intel can't open-source now. The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process. Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08i40e: Fix macvlan leak by synchronizing access to mac_filter_hashAleksandr Loktionov
This patch addresses a macvlan leak issue in the i40e driver caused by concurrent access to vsi->mac_filter_hash. The leak occurs when multiple threads attempt to modify the mac_filter_hash simultaneously, leading to inconsistent state and potential memory leaks. To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock), ensuring atomic operations and preventing concurrent access. Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in i40e_add_mac_filter() to help catch similar issues in the future. Reproduction steps: 1. Spawn VFs and configure port vlan on them. 2. Trigger concurrent macvlan operations (e.g., adding and deleting portvlan and/or mac filters). 3. Observe the potential memory leak and inconsistent state in the mac_filter_hash. This synchronization ensures the integrity of the mac_filter_hash and prevents the described leak. Fixes: fed0d9f13266 ("i40e: Fix VF's MAC Address change on VM") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-30i40e: Add Energy Efficient Ethernet ability for X710 Base-T/KR/KX cardsAleksandr Loktionov
Add "EEE: Enabled/Disabled" to dmesg for supported X710 Base-T/KR/KX cards. According to the IEEE standard report the EEE ability and the EEE Link Partner ability. Use the kernel's 'ethtool_keee' structure and report EEE link modes. Example: dmesg | grep 'NIC Link is' ethtool --show-eee <device> Before: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None Supported EEE link modes: Not reported Advertised EEE link modes: Not reported Link partner advertised EEE link modes: Not reported After: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None, EEE: Enabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Link partner advertised EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-13Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-07-11 (net/intel) This series contains updates to most Intel network drivers. Tony removes MODULE_AUTHOR from drivers containing the entry. Simon Horman corrects a kdoc entry for i40e. Pawel adds implementation for devlink param "local_forwarding" on ice. Michal removes unneeded call, and code, for eswitch rebuild for ice. Sasha removed a no longer used field from igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Remove the internal 'eee_advert' field ice: remove eswitch rebuild ice: Add support for devlink local_forwarding param i40e: correct i40e_addr_to_hkey() name in kdoc net: intel: Remove MODULE_AUTHORs ==================== Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-09i40e: Fix XDP program unloading while removing the driverMichal Kubiak
The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. Fixes: 6533e558c650 ("i40e: Fix reset path while removing the driver") Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29i40e: Fully suspend and resume IO operations in EEH caseThinh Tran
When EEH events occurs, the callback functions in the i40e, which are managed by the EEH driver, will completely suspend and resume all IO operations. - In the PCI error detected callback, replaced i40e_prep_for_reset() with i40e_io_suspend(). The change is to fully suspend all I/O operations - In the PCI error slot reset callback, replaced pci_enable_device_mem() with pci_enable_device(). This change enables both I/O and memory of the device. - In the PCI error resume callback, replaced i40e_handle_reset_warning() with i40e_io_resume(). This change allows the system to resume I/O operations Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29i40e: factoring out i40e_suspend/i40e_resumeThinh Tran
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been introduced. These functions were factored out from the existing i40e_suspend() and i40e_resume() respectively. This factoring was done due to concerns about the logic of the I40E_SUSPENSED state, which caused the device to be unable to recover. The functions are now used in the EEH handling for device suspend/resume callbacks. The function i40e_enable_mc_magic_wake() has been moved ahead of i40e_io_suspend() to ensure it is declared before being used. Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-08i40e: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-30i40e: Add and use helper to reconfigure TC for given VSIIvan Vecera
Add helper i40e_vsi_reconfig_tc(vsi) that configures TC for given VSI using previously stored TC bitmap. Effectively replaces open-coded patterns: enabled_tc = vsi->tc_config.enabled_tc; vsi->tc_config.enabled_tc = 0; i40e_vsi_config_tc(vsi, enabled_tc); Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Add helper to access main VEBIvan Vecera
Add a helper to access main VEB: i40e_pf_get_main_veb(pf) replaces 'pf->veb[pf->lan_veb]' Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Consolidate checks whether given VSI is mainIvan Vecera
In the driver code there are 3 types of checks whether given VSI is main or not: 1. vsi->type ==/!= I40E_VSI_MAIN 2. vsi ==/!= pf->vsi[pf->lan_vsi] 3. vsi->seid ==/!= pf->vsi[pf->lan_vsi]->seid All of them are equivalent and can be consolidated. Convert cases 2 and 3 to case 1. Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Add helper to access main VSIIvan Vecera
Add simple helper i40e_pf_get_main_vsi(pf) to access main VSI that replaces pattern 'pf->vsi[pf->lan_vsi]' Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-30i40e: Refactor argument of i40e_detect_recover_hung()Ivan Vecera
Commit 07d44190a389 ("i40e/i40evf: Detect and recover hung queue scenario") changes i40e_detect_recover_hung() argument type from i40e_pf* to i40e_vsi* to be shareable by both i40e and i40evf. Because the i40evf does not exist anymore and the function is exclusively used by i40e we can revert this change. Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>