| Age | Commit message (Collapse) | Author |
|---|
|
iris_get_instance() looks up an instance on core->instances and returns
it after dropping core->lock, without taking any reference. The threaded
interrupt handler uses this to find the instance a firmware response
belongs to and then takes inst->lock. Meanwhile userspace may close the
same file descriptor: iris_close() removes the instance from the list,
destroys inst->lock and frees the instance. The interrupt handler then
operates on freed memory and a destroyed mutex, a use-after-free.
Add a kref to struct iris_inst. iris_get_instance() takes a reference
under core->lock, so an instance it returns cannot be freed until the
caller drops that reference with iris_inst_put(). The instance is
released (mutexes destroyed, memory freed) only when the last reference
goes away, whether that is held by the closing thread or the interrupt
handler.
Fixes: 38fc8beaba55 ("media: iris: implement reqbuf ioctl with vb2_queue_setup")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add the necessary plumbing into the HFi Gen2 to signal the decoder
the right 10bit pixel format and stride when in compressed mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
To simplify code checking for pixel formats, add helpers to
check for 8bit and 10bit formats.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The HW response time is a constant between platforms. Remove it from the
iris_platform_data structure and use it directly.
Suggested-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add rotation control for encoder, enabling V4L2_CID_ROTATE and handling
90/180/270 degree rotation.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce handling for the QC08C format in the decoder. QC08C format is
NV12 with UBWC compression. Update format checks and configuration to
enable decoding of QC08C streams.
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add supports for the G/S_PARM V4L2 ioctls for encoder video device with
necessary hooks. This allows userspace to query the current streaming
parameters such as frame intervals and set desired streaming parameters
primarily the frame rate.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement the vb2 ops for the buf queue. These are the different buffer
attributes:
BUF_ATTR_DEFERRED - buffer queued by the client but not submitted to
firmware.
BUF_ATTR_PENDING_RELEASE - buffers requested to be released from
the firmware.
BUF_ATTR_QUEUED - buffers submitted to the firmware.
BUF_ATTR_DEQUEUED - buffers received from the firmware.
BUF_ATTR_BUFFER_DONE - buffers sent back to vb2.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
During the stream on operation, set some mandatory properties on the
firmware to start a session. Set all v4l2 properties, which are set by
the client, on to firmware, which is prepared with the dependency graph.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
During the stream on operation, send HFI_CMD_START on the capture and
output planes to start processing on the respective planes.
During the stream off operation, send HFI_CMD_STOP to the firmware,
which is a synchronous command. After the response is received by the
firmware, the session is closed on the firmware.
Introduce different states for the instance and state transitions.
IRIS_INST_INIT - video instance is opened.
IRIS_INST_INPUT_STREAMING - stream on is completed on output plane.
IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane.
IRIS_INST_STREAMING - stream on is completed on both output and capture
planes.
IRIS_INST_DEINIT - video instance is closed.
IRIS_INST_ERROR - error state.
|
v
-------------
+---------| INIT |--------- +
| ------------- |
| ^ ^ |
| / \ |
| / \ |
| v v |
| ----------- ----------- |
| | INPUT OUTPUT | |
|---| STREAMING STREAMING |---|
| ----------- ----------- |
| ^ ^ |
| \ / |
| \ / |
| v v |
| ------------- |
|--------| STREAMING |-----------|
| ------------- |
| | |
| | |
| v |
| ----------- |
+-------->| DEINIT |<----------+
| ----------- |
| | |
| | |
| v |
| ---------- |
+-------->| ERROR |<-----------+
----------.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the
driver with necessary hooks.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
