| Age | Commit message (Collapse) | Author |
|---|
|
In secondary queue LRCs, the QUEUE TIMESTAMP register is saved and
restored allowing us to view the individual queue run times. Add helpers
to read this value from the LRC.
BSpec: 73988
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-19-umesh.nerlige.ramappa@intel.com
|
|
For an LRC belonging to the secondary queue, in order to check if its
context group is active, we need to check the LRC of the primary queue.
In addition to that we want to compare the secondary queue position to
CSMQDEBUG register to check if the queue itself is active.
To do so, store primary LRC and position information in the LRC.
A note on references involved:
- In general the Queue takes a ref on its LRC.
- In addition, for multi-queue,
a. Primary Queue takes a ref for each Secondary LRC.
b. Each Secondary Queue takes a ref to the Primary Queue
In the current patch, each LRC in the queue group is storing a pointer
to primary LRC. Both primary and secondary LRCs are freed only when
primary queue is destroyed. At this time, all secondary queues are
already destroyed, so there is no one using secondary LRCs. We should be
good without taking any additional references.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-18-umesh.nerlige.ramappa@intel.com
|
|
Add a timestamp in milliseconds to the LRC snapshot to make it easier to
reason about how long the LRC has been running and the average duration
of each job.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-15-umesh.nerlige.ramappa@intel.com
|
|
Use the 64 bit value when available for the context timestamp in the LRC
snapshot.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260507162016.3888309-14-umesh.nerlige.ramappa@intel.com
|
|
The engine state size reported to GuC via ADS should only include the
engine state portion and should not include the indirect ring state page
that comes after it in the context image. The GuC uses this size to
overwrite the engine state in the LRC on watchdog resets and we don't
want it to overwrite the indirect ring state as well.
Fixes: d6219e1cd5e3 ("drm/xe: Add Indirect Ring State support")
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260504094924.3760713-4-satyanarayana.k.v.p@intel.com
|
|
Similar to i915's commit cebc13de7e704b1355bea208a9f9cdb042c74588
("drm/i915: Whitelist COMMON_SLICE_CHICKEN3 for UMD access"), except
that instead of putting the register on the allowlist for UMD to
program, the KMD is doing the programming at context initialization
based on a queue creation flag.
This is a recommended tuning setting for both gen12 and Xe_HP
platforms.
If a render queue is created with
DRM_XE_EXEC_QUEUE_SET_STATE_CACHE_PERF_FIX, COMMON_SLICE_CHICKEN3 will
be programmed at initialization to enable the render color cache to
key with BTP+BTI (binding table pool + binding table entry) instead of
just BTI (binding table entry). This enables the UMD to avoid emitting
render-target-cache-flush + stall-at-pixel-scoreboard every time a
binding table entry pointing to a render target is changed.
v2: Use xe_lrc_write_ring()
v3: Update xe_query.c to report availability
v4: Rename defines to add DISABLE_
v5: update commit message
v6: rebase
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39982
Bspec: 73993, 73994, 72161, 31870, 68331
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patch.msgid.link/20260306075504.1288676-1-lionel.g.landwerlin@intel.com
|
|
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
Fixes: 3c1fa4aa60b1 ("drm/xe: Move queue init before LRC creation")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> (v1)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-2-tomasz.lis@intel.com
|
|
An LRC is stored in memory as a special batchbuffer that hardware will
execute to re-load state when switching to the context; it's a
collection of register values (encoded as MI_LOAD_REGISTER_IMM commands)
and other state instructions (e.g., 3DSTATE_*). The value that will be
loaded for a given register can be determined by parsing the batchbuffer
to find MI_LRI commands and extracting the value from the offset/value
pairs it contains. Add functions to do this, which will be used in a
future patch to help verify that our expected reg_sr programming is in
place.
The implementation here returns the value as soon as it finds a match in
the LRC. Technically a register could appear multiple times (either due
to memory corruption or a hardware defect) and the last value
encountered would be the one in effect when the context resumes
execution. We can adjust the logic to keep looking and return the last
match instead of first in the future if we encounter real-world cases
where this would assist with debugging.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260218-sr_verify-v4-3-35d6deeb3421@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
We now have proper infrastructure to accurately check the LRC timestamp
without toggling the scheduling state for non-VFs. For VFs, it is still
possible to get an inaccurate view if the context is on hardware. We
guard against free-running contexts on VFs by banning jobs whose
timestamps are not moving. In addition, VFs have a timeslice quantum
that naturally triggers context switches when more than one VF is
running, thus updating the LRC timestamp.
For multi-queue, it is desirable to avoid scheduling toggling in the TDR
because this scheduling state is shared among many queues. Furthermore,
this change simplifies the GuC state machine. The trade-off for VF cases
seems worthwhile.
v5:
- Add xe_lrc_timestamp helper (Umesh)
v6:
- Reduce number of tries on stuck timestamp (VF testing)
- Convert job timestamp save to a memory copy (VF testing)
v7:
- Save ctx timestamp to LRC when start VF job (VF testing)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260110012739.2888434-8-matthew.brost@intel.com
|
|
Add support for queues of a multi queue group to set
their priority within the queue group by adding property
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY.
This is the only other property supported by secondary
queues of a multi queue group, other than
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE.
v2: Add kernel doc for enum xe_multi_queue_priority,
Add assert for priority values, fix includes and
declarations (Matt Brost)
v3: update uapi kernel-doc (Matt Brost)
v4: uapi change due to rebase
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-23-niranjana.vishwanathapura@intel.com
|
|
Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which sets the exec
queue default state to user data passed in. The intent is for a Mesa
tool to use this replay GPU hangs.
v2:
- Enable the flag DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE
- Fix the page size math calculation to avoid a crash
v4:
- Use vmemdup_user (Maarten)
- Copy default state first into LRC, then replay state (Testing, Carlos)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-10-matthew.brost@intel.com
|
|
Add replay_offset and replay_length lines to LRC HWCTX snapshot with the
idea being this information can be used extract the data which needs to
be pass to exec queue extension DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE
so GPU hang can be replayed via a Mesa tool.
The additional lines look like:
[HWCTX].replay_offset: 0x%x
[HWCTX].replay_length: 0x%x
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20251126185952.546277-9-matthew.brost@intel.com
|
|
A queue must be in the submission backend's tracking state before the
LRC is created to avoid a race condition where the LRC's GGTT addresses
are not properly fixed up during VF post-migration recovery.
Move the queue initialization—which adds the queue to the submission
backend's tracking state—before LRC creation.
Also wait on pending GGTT fixups before allocating LRCs to avoid racing
with fixups.
v2:
- Wait on VF GGTT fixes before creating LRC (testing)
v5:
- Adjust comment in code (Tomasz)
- Reduce race window
v7:
- Only wakeup waiters in recovery path (CI)
- Wakeup waiters on abort
- Use GT warn on (Michal)
- Fix kernel doc for LRC ring size function (Tomasz)
v8:
- Guard against migration not supported or no memirq (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-28-matthew.brost@intel.com
|
|
In general, kernel structures should be allocated in the kernel-dedicated
VRAM region. However, userspace context data - while used by the kernel -
does not need to reside there.
Let's force the allocation of such data in the general-purpose VRAM region
accessible to userspace.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-4-piotr.piorkowski@intel.com
|
|
The WA buffer we use to capture context utilization contains GGTT
references. This means its instructions have to be either fixed or
re-emitted during VF post-migration recovery.
This patch adds re-emitting content of the utilization WA BB during
the recovery.
The way we write to vram requires scratch buffer to be used before
the whole block is memcopied. We are re-using a scratch buffer
introduced in earlier part of the recovery. This is not a performance
optimization, but a necessity to avoid creating dependencies between
locks.
v2: Notable rebase after "Prepare WA BB setup for more users" patch
v3: Added error propagation
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-8-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
All contexts require an update of state data, as the data includes
GGTT references to memirq-related buffers.
Default contexts need these references updated as well, because they
are not refreshed when a new context is created from them.
The way we write to vram requires scratch buffer to be used
before the whole block is memcopied. Since using kalloc() within
specific recovery functions would lead to unintended relations
between locks, we are allocating the buffer earlier, before
any locks are taken. The same buffer will be used for other steps
of the recovery.
v2: Update addresses by xe_lrc_write_ctx_reg() rather than
set_memory_based_intr()
v3: Renamed parameter, reordered parameters in some functs
v4: Check if have MEMIRQ, move `xe_gt*` funct to proper file
v5: Revert back to requiring scratch buffer, but allocate it
earlier this time
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-6-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
All contexts require an update due to GGTT range shift, as that
affects their HWSP.
The HW status page of a context contains GGTT references, which
need to be shifted to a new range (or re-computed using the
previously updated vma nodes). The references include ring start
address and indirect state address.
v2: move some functions to better matched files
v3: Add missing kerneldocs
v4: Style fix
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-5-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
I was debugging some unrelated issue and noticed the current code was
very verbose. We can improve it easily by using the more common batch
buffer building pattern.
Before:
bb->cs[bb->len++] = MI_LOAD_REGISTER_REG | MI_LRR_DST_CS_MMIO;
c4d: 41 8b 56 10 mov 0x10(%r14),%edx
c51: 49 8b 4e 08 mov 0x8(%r14),%rcx
c55: 8d 72 01 lea 0x1(%rdx),%esi
c58: 41 89 76 10 mov %esi,0x10(%r14)
c5c: c7 04 91 01 00 08 15 movl $0x15080001,(%rcx,%rdx,4)
bb->cs[bb->len++] = entry->reg.addr;
c63: 8b 08 mov (%rax),%ecx
c65: 41 8b 56 10 mov 0x10(%r14),%edx
c69: 49 8b 76 08 mov 0x8(%r14),%rsi
c6d: 81 e1 ff ff 3f 00 and $0x3fffff,%ecx
c73: 8d 7a 01 lea 0x1(%rdx),%edi
c76: 41 89 7e 10 mov %edi,0x10(%r14)
c7a: 89 0c 96 mov %ecx,(%rsi,%rdx,4)
..etc..
After:
*cs++ = MI_LOAD_REGISTER_REG | MI_LRR_DST_CS_MMIO;
c52: 41 c7 04 24 01 00 08 movl $0x15080001,(%r12)
c59: 15
*cs++ = entry->reg.addr;
c5a: 8b 10 mov (%rax),%edx
..etc..
Resulting in the following binary change:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-348 (-348)
Function old new delta
xe_gt_record_default_lrcs.cold 304 296 -8
xe_gt_record_default_lrcs 2200 1860 -340
Total: Before=13554, After=13206, chg -2.57%
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710-lrc-refactors-v2-7-a5e2ca03f6bd@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Context Timestamp (CTX_TIMESTAMP) in the LRC accumulates the run ticks
of the context, but only gets updated when the context switches out. In
order to check how long a context has been active before it switches
out, two things are required:
(1) Determine if the context is running:
To do so, we program the WA BB to set an initial value for CTX_TIMESTAMP
in the LRC. The value chosen is 1 since 0 is the initial value when the
LRC is initialized. During a query, we just check for this value to
determine if the context is active. If the context switched out, it
would overwrite this location with the actual CTX_TIMESTAMP MMIO value.
Note that WA BB runs as the last part of the context restore, so reusing
this LRC location will not clobber anything.
(2) Calculate the time that the context has been active for:
The CTX_TIMESTAMP ticks only when the context is active. If a context is
active, we just use the CTX_TIMESTAMP MMIO as the new value of
utilization. While doing so, we need to read the CTX_TIMESTAMP MMIO
for the specific engine instance. Since we do not know which instance
the context is running on until it is scheduled, we also read the
ENGINE_ID MMIO in the WA BB and store it in the PPHSWP.
Using the above 2 instructions in a WA BB, capture active context
utilization.
v2: (Matt Brost)
- This breaks TDR, fix it by saving the CTX_TIMESTAMP register
"drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value"
- Drop tile from LRC if using gt
"drm/xe: Save the gt pointer in LRC and drop the tile"
v3:
- Remove helpers for bb_per_ctx_ptr (Matt)
- Add define for context active value (Matt)
- Use 64 bit CTX TIMESTAMP for platforms that support it. For platforms
that don't, live with the rare race. (Matt, Lucas)
- Convert engine id to hwe and get the MMIO value (Lucas)
- Correct commit message on when WA BB runs (Lucas)
v4:
- s/GRAPHICS_VER(...)/xe->info.has_64bit_timestamp/ (Matt)
- Drop support for active utilization on a VF (CI failure)
- In xe_lrc_init ensure the lrc value is 0 to begin with (CI regression)
v5:
- Minor checkpatch fix
- Squash into previous commit and make TDR use 32-bit time
- Update code comment to match commit msg
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4532
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-8-umesh.nerlige.ramappa@intel.com
|
|
Userspace is required to mark a queue as using PXP to guarantee that the
PXP instructions will work. In addition to managing the PXP sessions,
when a PXP queue is created the driver will set the relevant bits in
its context control register.
On submission of a valid PXP queue, the driver will validate all
encrypted objects mapped to the VM to ensured they were encrypted with
the current key.
v2: Remove pxp_types include outside of PXP code (Jani), better comments
and code cleanup (John)
v3: split the internal PXP management to a separate patch for ease of
review. re-order ioctl checks to always return -EINVAL if parameters are
invalid, rebase on msix changes.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
|
|
The key termination is done with a specific submission to the VCS
engine. This flow will be triggered in response to a termination
interrupt, whose handling is coming in a follow-up patch in the series.
v2: clean up defines and command emission code. (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-4-daniele.ceraolospurio@intel.com
|
|
- Configure the HW engines to work with MSI-X
- Program the LRC to use memirq infra (similar to VF)
- CS_INT_VEC field added to the LRC
Bspec: 60342, 72547
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-3-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add LRC ring start register to LRC snapshot to verify no LRC register
corruption upon hang. This could be possible if the indirect ring state
was mapped to user space or via an internal KMD memory corruption.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-4-matthew.brost@intel.com
|
|
The ring is currently in LRC BO but this may change going forward.
Include the ring address in the snapshot protecting again any future
changes.
v2:
- s/ring_desc/ring_addr (Jonathan)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-3-matthew.brost@intel.com
|
|
Add helper to compare ring head and tail to determine if LRC is idle.
v2:
- Fix kernel doc (CI, Zhanjun)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-2-matthew.brost@intel.com
|
|
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could
end up with 4 possible scenarios at this starting point of this decision:
1. the guc-captured register-dump is already there.
2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture
will not happen.
3. the user has started the driver in execlist-submission mode.
4. the guc-captured register-dump is not ready yet so we force GuC to kill
that context now, but:
A. we don't know yet if GuC will be successful on the engine-reset
and get the guc-err-capture, else kmd will do a manual reset later
OR B. guc will be successful and we will get a guc-err-capture
shortly.
So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD
capture first(which is not be reliable in guc-submission mode) and decide
later if we need to use that for the cases of 2 or 4A. So this flow is
part of the implementation for this patch.
Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor
list.
Add manual capture by read from hw engine if GuC capture is not ready.
If it becomes ready at later time, GuC sourced data will be used.
Although there may only be a small delay between (1) the check for whether
guc-err-capture is available at the start of guc_exec_queue_timedout_job
and (2) the decision on using a valid guc-err-capture or manual-capture,
lets not take any chances and lock the matching node down so it doesn't
get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached
nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
|
|
Add OAR support to allow userspace to execute MI_REPORT_PERF_COUNT on
render engines. Configuration batches are used to program the OAR unit, as
well as modifying the render engine context image of a specified exec queue
(to have correct register values when that context switches in).
v2: Rename/refactor xe_oa_modify_self (Umesh)
v3: Move IS_MI_LRI_CMD() into xe_oa.c (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-11-ashutosh.dixit@intel.com
|
|
LRC ctx timestamp support functions are used to determine how long a job
has run on the hardware.
v2:
- Don't use static inlines (Jani)
- Kernel doc
- s/ctx_timestamp_job/ctx_job_timestamp
v6:
- Add kernel doc for xe_lrc_update_timestamp (Lucas)
- Call xe_lrc_ctx_timestamp() in xe_lrc_update_timestamp (Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611144053.2805091-2-matthew.brost@intel.com
|
|
Add kernel-doc to xe_lrc_create/destroy and xe_lrc_get/put
interfaces.
v2: Fix kernel-doc for xe_lrc_create(), drop Fixes tag.
(Matt Brost, Michal Wajdeczko)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531161230.32317-1-niranjana.vishwanathapura@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Decouple xe_lrc from xe_exec_queue and reference count xe_lrc.
Removing hard coupling between xe_exec_queue and xe_lrc allows
flexible design where the user interface xe_exec_queue can be
destroyed independent of the hardware/firmware interface xe_lrc.
v2: Fix lrc indexing in wq_item_append()
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530032211.29299-1-niranjana.vishwanathapura@intel.com
|
|
It's not used anymore.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527135912.152156-5-thomas.hellstrom@linux.intel.com
|
|
Since sometimes a lock is required to initialize a seqno fence,
and it might be desirable not to hold that lock while performing
memory allocations, split the lrc seqno fence creation up into an
allocation phase and an initialization phase.
Since lrc seqno fences under the hood are hw_fences, do the same
for these and remove the xe_hw_fence_create() function since it
is not used anymore.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527135912.152156-3-thomas.hellstrom@linux.intel.com
|
|
Add a helper to capture CTX_TIMESTAMP from the context image so it can
be used to calculate the runtime.
v2: Add kernel-doc to clarify expectation from caller
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Prefer forward declarations over #include xe_lrc_types.h
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513084218.2084-4-michal.wajdeczko@intel.com
|
|
When Indirect Ring State is enabled, the Ring Buffer state and
Batch Buffer state are context save/restored to/from Indirect
Ring State instead of the LRC. The Indirect Ring State is a 4K
page mapped in global GTT at a 4K aligned address. This address
is programmed in the INDIRECT_RING_STATE register of the
corresponding context's LRC.
v2: Fix kernel-doc, add bspec reference
v3: Fix typo in commit text
Bspec: 67296, 67139
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507224255.5059-3-niranjana.vishwanathapura@intel.com
|
|
Add a xe_guc_exec_queue_snapshot_capture_delayed and
xe_lrc_snapshot_capture_delayed function to capture
the contents of LRC in the next patch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227131248.92910-2-maarten.lankhorst@linux.intel.com
|
|
This allows the dumping of HWSP and HW Context without exporting more
functions.
Changes since v1:
- GFP_KERNEL -> GFP_NOWAIT. (Souza)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227131248.92910-1-maarten.lankhorst@linux.intel.com
|
|
On some platforms we need to emit some non-register state while
recording an engine class' default LRC. Add the infrastructure to
support this; actual per-platform tables will be added in future
patches.
v2:
- Checkpatch whitespace fix
- Add extra assertion to ensure num_dw != 0. (Bala)
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20231025151732.3461842-6-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
For non-RCS engines, nearly all of the LRC state is composed of MI
instructions (specifically MI_LOAD_REGISTER_IMM). Providing a dump
interface allows us to verify that the context image layout matches
what's documented in the bspec, and also allows us to check whether LRC
workarounds are being properly captured by the default state we record
at startup.
For now, the non-MI instructions found in the RCS and CCS engines will
dump as "unknown;" parsing of those will be added in a follow-up patch.
v2:
- Add raw instruction header as well as decoded meaning. (Lucas)
- Check that num_dw isn't greater than remaining_dw for instructions
that have a "# dwords" field. (Lucas)
- Clarify comment about skipping over ppHWSP. (Lucas)
Bspec: 64993
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231016163449.1300701-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Engine was inappropriately used to refer to execution queues and it
also created some confusion with hardware engines. Where it applies
the exec_queue variable name is changed to q and comments are also
updated.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/162
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
