| Age | Commit message (Collapse) | Author |
|---|
|
UTS_RELEASE evaluates to a static string and changes quite easily (e.g.
uncommitted changes in the source tree or new commits). So when checking
if a patch introduces changes to the resulting binary each usage of
UTS_RELEASE is source of annoyance.
Instead of using UTS_RELEASE directly use init_utsname()->release which
evaluates to the same string but with that a change of UTS_RELEASE
doesn't affect xe_devcoredump.o.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patch.msgid.link/20260428102527.189593-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260326181017.2060209-1-zhanjun.dong@intel.com
|
|
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260202103756.62138-2-marco.crivellari@suse.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
clangd reports many "unused header" warnings throughout the Xe driver.
Start working to clean this up by removing unnecessary includes in our
.c files and/or replacing them with explicit includes of other headers
that were previously being included indirectly.
By far the most common offender here was unnecessary inclusion of
xe_gt.h. That likely originates from the early days of xe.ko when
xe_mmio did not exist and all register accesses, including those
unrelated to GTs, were done with GT functions.
There's still a lot of additional #include cleanup that can be done in
the headers themselves; that will come as a followup series.
v2:
- Squash the 79-patch series down to a single patch. (MattB)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260115032803.4067824-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Use scope-based cleanup for forcewake and runtime PM in the devcoredump
code. This eliminates some goto-based error handling and slightly
simplifies other functions.
v2:
- Move the forcewake acquisition slightly higher in
devcoredump_snapshot() so that we maintain an easy-to-understand LIFO
cleanup order. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-41-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
xe_pm_runtime_put() is missed to be called for the error path in
xe_devcoredump_read().
Add function description comments for xe_devcoredump_read() to help
understand it.
v2: more detail function comments and refine goto logic (Matt)
Fixes: c4a2e5f865b7 ("drm/xe: Add devcoredump chunking")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250707004911.3502904-6-shuicheng.lin@intel.com
|
|
The deleted code is no longer needed because patch "drm/xe/guc: Plumb
GuC-capture into dev coredump" has removed the related usage code.
Remove the code to tidy up the function.
v2: s/bacause/because
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250707004911.3502904-5-shuicheng.lin@intel.com
|
|
The device core dumps are copied in 1.5GB chunks, which leads to a
link-time error on 32-bit builds because of the 64-bit division not
getting trivially turned into mask and shift operations:
ERROR: modpost: "__moddi3" [drivers/gpu/drm/xe/xe.ko] undefined!
On top of this, I noticed that the ALIGN_DOWN() usage here cannot
work because that is only defined for power-of-two alignments.
Change ALIGN_DOWN into an explicit div_u64_rem() that avoids the
link error and hopefully produces the right results.
Doing a 1.5GB kvmalloc() does seem a bit suspicious as well, e.g.
this will clearly fail on any 32-bit platform and is also likely
to run out of memory on 64-bit systems under memory pressure, so
using a much smaller power-of-two chunk size might be a good idea
instead.
v2:
- Always call div_u64_rem (Matt)
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504251238.JsNgFeFc-lkp@intel.com/
Fixes: c4a2e5f865b7 ("drm/xe: Add devcoredump chunking")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250501012545.1045247-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Chunk devcoredump into 1.5G pieces to avoid hitting the kvmalloc limit
of 2G. Simple algorithm reads 1.5G at time in xe_devcoredump_read
callback as needed.
Some memory allocations are changed to GFP_ATOMIC as they done in
xe_devcoredump_read which holds lock in the path of reclaim. The
allocations are small, so in practice should never fail.
v2:
- Update commit message wrt gfp atomic (John H)
v6:
- Drop GFP_ATOMIC change for hwconfig (John H)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250423171725.597955-2-matthew.brost@intel.com
|
|
kzalloc returns a valid pointer or NULL if the allocation fails.
It never returns an error pointer. It is better to check for NULL directly.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220001710.1803749-3-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The log should print with "offset" instead of "size".
Correct the typo in the comment.
v2: split kzalloc change and add typo fix in commit message (Lucas)
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220001710.1803749-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa debug tool")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Having the exec queue snapshot inside a "GuC CT" section was always
wrong. Commit c28fd6c358db ("drm/xe/devcoredump: Improve section
headings and add tile info") tried to fix that bug, but with that also
broke the mesa tool that parses the devcoredump, hence it was reverted
in commit 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa
debug tool").
With the mesa tool also fixed, this can propagate as a fix on both
kernel and userspace side to avoid unnecessary headache for a debug
feature.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa debug tool")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123051112.1938193-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Fix all typos in files of xe, reported by codespell tool.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106102646.1400146-2-nitin.r.gote@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
There is a mesa debug tool for decoding devcoredump files. Recent
changes to improve the devcoredump output broke that tool. So revert
the changes until the tool can be extended to support the new fields.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c28fd6c358db ("drm/xe/devcoredump: Improve section headings and add tile info")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213172833.1733376-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There are now multiple places that can trigger a coredump. Some of
which can happen in parallel. There is already a check against
capturing multiple dumps sequentially, but without locking it doesn't
guarantee to work against concurrent dumps. And if two dumps do happen
in parallel, they can end up doing Bad Things such as one call stack
freeing the data the other call stack is still processing. Which leads
to a crashed kernel.
Further, it is possible for the DRM timeout to expire and trigger a
free of the capture while a user is still reading that capture out
through sysfs. Again leading to dodgy pointer problems.
So, add a mutext lock around the capture, read and free functions to
prevent inteference.
v2: Swap tiny scope spin_lock for larger scope mutex and fix
kernel-doc comment (review feedback from Matthew Brost)
v3: Move mutex locks to exclude worker thread and add reclaim
annotation (review feedback from Matthew Brost)
v4: Fix typo.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-4-John.C.Harrison@Intel.com
|
|
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044cb ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
|
|
There are debug level prints giving more information about the cause
of the hang immediately before core dumps are created. However, not
everyone has debug level prints enabled or saves the dmesg log at all.
So include that information in the dump file itself. Also, at least
one of those prints included the pid as well as the process name. So
include that in the capture too.
v2: Fix kvfree vs kfree and missing kernel-doc (review feedback from
Matthew Brost)
v3: Use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-2-John.C.Harrison@Intel.com
|
|
The delayed snapshot capture worker can access the GPU or VRAM both of
which require a PM reference. Take a reference in this worker.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 4f04d07c0a94 ("drm/xe: Faster devcoredump")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126174615.2665852-5-matthew.brost@intel.com
|
|
During capture time, the target job may be unavailable (e.g., if it's in
LR mode). However, the associated exec queue will be available
regardless, change xe_engine_snapshot_capture_for_job to take a queue
argument ann rename to xe_engine_snapshot_capture_for_queue.
v2:
- Reword commit message (Jonathan)
- Remove redundant queueu check (Zhanjun)
- Remove devcoredump job member (Zhanjun)
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-7-matthew.brost@intel.com
|
|
During capture time, the target job may be unavailable (e.g., if it's in
LR mode). However, the associated exec queue will be available
regardless, so add an exec queue param for such cases.
v2:
- Reword commit message (Jonathan)
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114022522.1951351-5-matthew.brost@intel.com
|
|
Let the introduction be useful for both userspace and kernel. Also
improve the formatting to wire up later to the documentation build.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102161254.1818604-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The guc_info debugfs file is meant to be a quick view of the current
software state of the GuC interface. Including the full CTB contents
makes the file as a whole much less human readable and is not
partiular useful in the general case. So don't pollute the info dump
with the full buffers. Instead, move those into a separate debugfs
entry that can be read when that information is actually required.
Also, improve the human readability by adding a few extra blank lines
to delimt the sections.
v2: Hide the internal capture/print params from external callers that
don't need to know (review feedback from Matthew Brost).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024002554.1983101-3-John.C.Harrison@Intel.com
|
|
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Use helper xe_force_wake_ref_has_domain to
verify all domains are initialized or not. Update the return handling of
xe_force_wake_get() to reflect this behavior, and ensure that the return
value is passed as input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
v5
- return unsigned int for xe_force_wake_get()
v6
- use helper xe_force_wake_ref_has_domain()
v7
- Fix commit message
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-12-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Save manual engine capture into capture list.
This removes duplicate register definitions across manual-capture vs
guc-err-capture.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-7-zhanjun.dong@intel.com
|
|
When we decide to kill a job, (from guc_exec_queue_timedout_job), we could
end up with 4 possible scenarios at this starting point of this decision:
1. the guc-captured register-dump is already there.
2. the driver is wedged.mode > 1, so GuC-engine-reset / GuC-err-capture
will not happen.
3. the user has started the driver in execlist-submission mode.
4. the guc-captured register-dump is not ready yet so we force GuC to kill
that context now, but:
A. we don't know yet if GuC will be successful on the engine-reset
and get the guc-err-capture, else kmd will do a manual reset later
OR B. guc will be successful and we will get a guc-err-capture
shortly.
So to accomdate the scenarios of 2 and 4A, we will need to do a manual KMD
capture first(which is not be reliable in guc-submission mode) and decide
later if we need to use that for the cases of 2 or 4A. So this flow is
part of the implementation for this patch.
Provide xe_guc_capture_get_reg_desc_list to get the register dscriptor
list.
Add manual capture by read from hw engine if GuC capture is not ready.
If it becomes ready at later time, GuC sourced data will be used.
Although there may only be a small delay between (1) the check for whether
guc-err-capture is available at the start of guc_exec_queue_timedout_job
and (2) the decision on using a valid guc-err-capture or manual-capture,
lets not take any chances and lock the matching node down so it doesn't
get re-claimed if GuC-Err-Capture subsystem is running out of pre-cached
nodes.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004193428.3311145-6-zhanjun.dong@intel.com
|
|
Include the GuC log in devcoredump captures because they can be useful
with debugging certain types of bug.
v2: Fix kerneldoc
v3: Drop module parameter as now using more compact ascii85 encoding
rather than hexdump (although still not compressed) (review feedback
from Matthew B). Rebase onto recent refactoring of devcoredump code.
v4: Don't move the submission snapshot inside the GuC internals
structure 'cos it really doesn't belong there.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003004611.2323493-11-John.C.Harrison@Intel.com
|
|
There is a need to include the GuC log and other large binary objects
in core dumps and via dmesg. So add a helper for dumping to a printer
function via conversion to ASCII85 encoding.
Another issue with dumping such a large buffer is that it can be slow,
especially if dumping to dmesg over a serial port. So add a yield to
prevent the 'task has been stuck for 120s' kernel hang check feature
from firing.
v2: Add a prefix to the output string. Fix memory allocation bug.
v3: Correct a string size calculation and clean up a define (review
feedback from Julia F).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003004611.2323493-5-John.C.Harrison@Intel.com
|
|
The xe_guc_exec_queue_snapshot is not really a GuC internal thing and
is definitely not a GuC CT thing. So give it its own section heading.
The snapshot itself is really a capture of the submission backend's
internal state. Although all it currently prints out is the submission
contexts. So label it as 'Contexts'. If more general state is added
later then it could be change to 'Submission backend' or some such.
Further, everything from the GuC CT section onwards is GT specific but
there was no indication of which GT it was related to (and that is
impossible to work out from the other fields that are given). So add a
GT section heading. Also include the tile id of the GT, because again
significant information.
Lastly, drop a couple of unnecessary line feeds within sections.
v2: Add GT section heading, add tile id to device section.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003004611.2323493-4-John.C.Harrison@Intel.com
|
|
There are a bunch of calls to drm_printf with static strings. Switch
them to drm_puts instead.
There are also a bunch of 'coredump->snapshot.XXX' references when
'coredump->snapshot' has alread been cached locally as 'ss'. So use
'ss->XXX' instead.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003004611.2323493-3-John.C.Harrison@Intel.com
|
|
The current algorithm to read out devcoredump is O(N*N) where N is the
size of coredump due to usage of the drm_coredump_printer in
xe_devcoredump_read. Switch to a O(N) algorithm which prints the
devcoredump into a readable format in snapshot work and update
xe_devcoredump_read to memcpy from the readable format directly.
v2:
- Fix double free on devcoredump removal (Testing)
- Set read_data_size after snap work flush
- Adjust remaining in iterator upon realloc (Testing)
- Set read_data upon realloc (Testing)
v3:
- Kernel doc
v4:
- Two pass algorithm to determine size (Maarten)
v5:
- Use scope for reading variables (Johnathan)
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2408
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-4-matthew.brost@intel.com
|
|
An xe file can outlive the associated process as the GPU cleanup is just
triggered upon file close (process kill) and completes sometime later.
If the file close triggers error conditions (GPU hangs) the process
cannot be safely referenced to retrieve the name and pid for debug
information. Store the process name and pid directly in the xe file to
be safe.
v2:
- Access file->pid via rcu_access_pointer (Matthew Auld)
Fixes: b10d0c5e9df7 ("drm/xe: Add process name to devcoredump")
Fixes: f6ca930d974e ("drm/xe: Add process name and PID to job timedout message")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723151045.1725417-1-matthew.brost@intel.com
|
|
5 minutes is too short for a regular user to search and understand
what he needs to do to report capture devcoredump and report a bug to
us, so here increasing this timeout to 1 hour.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Kernel VM do not have an Xe file. Include a check for Xe file in the VM
before trying to get pid from VM's Xe file when taking a devcoredump.
Fixes: b10d0c5e9df7 ("drm/xe: Add process name to devcoredump")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530203341.1795181-1-matthew.brost@intel.com
|
|
Using snprintf() with a format string from task->comm is a bit
dangerous since the string may be controlled by unprivileged
userspace:
drivers/gpu/drm/xe/xe_devcoredump.c: In function 'devcoredump_snapshot':
drivers/gpu/drm/xe/xe_devcoredump.c:184:9: error: format not a string literal and no format arguments [-Werror=format-security]
184 | snprintf(ss->process_name, sizeof(ss->process_name), process_name);
| ^~~~~~~~
In this case there is no reason for an snprintf(), so use a simpler
string copy.
Fixes: b10d0c5e9df7 ("drm/xe: Add process name to devcoredump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528133251.2310868-1-arnd@kernel.org
|
|
Process name help us track what application caused the gpug hang, this
is crucial when running several applications at the same time.
v2:
- handle Xe KMD exec_queues without VM
v3:
- use get_pid_task() (suggested by Nirmoy)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522201203.145403-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Here we are using drmm to ensure we release the coredump when unloading
the module, however the coredump is very much tied to the struct device
underneath. We can see this when we hotunplug the device, for which we
have already got a coredump attached. In such a case the coredump still
remains and adding another is not possible. However we still register
the release action via xe_driver_devcoredump_fini(), so in effect two or
more releases for one dump. The other consideration is that the
coredump state is embedded in the xe_driver instance, so technically
once the drmm release action fires we might free the coredumpe state
from a different driver instance, assuming we have two release actions
and they can race. Rather use devm here to remove the coredump when the
device is released.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1679
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522102143.128069-29-matthew.auld@intel.com
|
|
This will remove devcoredump from file system and free its resources
during driver unload.
This fix the driver unload after gpu hang happened, otherwise this
it would report that Xe KMD is still in use and it would leave the
kernel in a state that Xe KMD can't be unload without a reboot.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Always capture exec queues on snapshot regardless if exec queue has
pending jobs or not. Having jobs or not does indicate whether the exec
queue capture is useful.
Example bugs that would not be easily detected by skipping capture when
pending job list is empty:
- Jobs pending on exec queue have dependencies
- Leaking exec queue refs
- GuC protocol issues (i.e. losing G2H)
In addition to above bugs, in general it just useful to see every exec
queue registered with the GuC and its state.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405211632.223568-2-matthew.brost@intel.com
|
|
Assign 'xe_devcoredump_snapshot *' and 'xe_device *' only if
'coredump' is not NULL.
v2
- Fix commit messages.
v3
- Define variables before code.(Ashutosh/Jose)
v4
- Drop return check for coredump_to_xe. (Jose/Rodrigo)
v5
- Modify misleading commit message. (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328123739.3633428-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
My testing machine has only 8GB of RAM and while running piglit tests
I can reach the OOM cache in xe_vm_snapshot_capture() snap allocaiton
sometimes.
So to differentiate the OOM from race between capture and UMDs
unbinbind VMs here I'm adding a '[0].error: -12' to devcoredump.
v2:
- fix returned errno values
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307135229.41973-2-jose.souza@intel.com
|
|
A force_wake_get failure means that the HW might not be awake for the
access we're doing; this can lead to an immediate error or it can be a
more subtle problem (e.g. a register read might return an incorrect
value that is still valid, leading the driver to make a wrong choice
instead of flagging an error).
We avoid an error from the force_wake function because callers might
handle or tolerate the error, but this only works if all callers
are checking the error code. The majority already do, but a few are not.
These are mainly falling into 3 categories, which are each handled
differently:
1) error capture: in this case we want to continue the capture, but we
log an info message in dmesg to notify the user that the capture
might have incorrect data.
2) ioctl: in this case we return a -EIO error to userspace
3) unabortable actions: these are scenarios where we can't simply abort
and retry and so it's better to just try it anyway because there is a
chance the HW is awake even with the failure. In this case we throw a
warning so we know there was a forcewake problem if something fails
down the line.
v2: use gt_WARN_ON where appropriate
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318154924.3453513-1-daniele.ceraolospurio@intel.com
|
|
Add a xe_guc_exec_queue_snapshot_capture_delayed and
xe_lrc_snapshot_capture_delayed function to capture
the contents of LRC in the next patch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227131248.92910-2-maarten.lankhorst@linux.intel.com
|
|
Since we cannot immediately capture the BO's and userptr, perform it in
2 stages. The immediate stage takes a reference to each BO and userptr,
while a delayed worker captures the contents and then frees the
reference.
This is required because in signaling context, no locks can be taken, no
memory can be allocated, and no waits on userspace can be performed.
With the delayed worker, all of this can be performed very easily,
without having to resort to hacks.
Changes since v1:
- Fix crash on NULL captured vm.
- Use ascii85_encode to capture BO contents and save some space.
- Add length to coredump output for each captured area.
Changes since v2:
- Dump each mapping on their own line, to simplify tooling.
- Fix null pointer deref in xe_vm_snapshot_free.
Changes since v3:
- Don't add uninitialized value to snap->ofs. (Souza)
- Use kernel types for u32 and u64.
- Move snap_mutex destruction to final vm destruction. (Souza)
Changes since v4:
- Remove extra memset. (Souza)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-6-maarten.lankhorst@linux.intel.com
|
|
It's not strictly needed to clear right now, but this prevents bugs
from dangling pointers.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-2-maarten.lankhorst@linux.intel.com
|
|
Those addresses are necessary to Mesa tools knows where in VM are the
batch buffers to parse and print instructions that are human readable.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130135648.30211-2-jose.souza@intel.com
|
|
To properly decode batch buffer Mesa tools needs to know what
platform is this one, for now we can do that with PCI id but
already making it future proof by also printing GTs GMD version.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123204454.246788-5-jose.souza@intel.com
|
|
When devcoredump start to dump the VMs contents it will be necessary
to know the starting addresses of batch buffers of the job that hang.
This information it set in xe_sched_job and xe_sched_job is not easily
acessible from xe_exec_queue, so here changing the parameter, next
patch will append the batch buffer addresses to devcoredump snapshot
capture.
v3:
- update functions documentation to xe_sched_job
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123204454.246788-2-jose.souza@intel.com
|
