| Age | Commit message (Collapse) | Author |
|---|
|
Now a panel_bridge is automatically created for every drm_panel and the
panel-bridge API is just a deprecated wrapper to access it.
Update and simplify the code by just getting a reference to the
already-existing bridge using of_drm_find_and_get_bridge().
Also keep the "connected to non-panel bridge (unsupported)\n" error logic
by using the drm_bridge_is_panel() function.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260916-drm-bridge-every-panel-v3-12-83afb4f1a707@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
We want to move drm_panel.o from the main drm module to a new drm_panel
module, but there is one function in the drm module that calls into
drm_panel.c code:
drm_of_find_panel_or_bridge() (drm_of.c, drm module)
-> calls of_drm_find_panel (drm_panel.c, future drm_panel module)
Avoid this issue by moving drm_of_find_panel_or_bridge() to drm_panel.c.
Update Kconfig symbols of drivers calling drm_of_find_panel_or_bridge() to
select DRM_PANEL when this is not done already.
No functional changes, just moving code around.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260916-drm-bridge-every-panel-v3-1-83afb4f1a707@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The mcde driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-26-tzimmermann@suse.de
|
|
As config FRAMEBUFFER_CONSOLE already selects VT_HW_CONSOLE_BINDING, there
is no need for any drm driver to repeat that rule for selecting.
Remove those duplications of selecting VT_HW_CONSOLE_BINDING.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[sima: Note that this is only correct since a5ae331edb02 ("drm: Drop
select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION") because select in
Kconfig isn't recursive and so needs to be replicated.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108121757.14069-1-lukas.bulwahn@gmail.com
|
|
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
|
|
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.
Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
|
|
This implements support for DPI output using the port node
in the device tree to connect a DPI LCD display to the
MCDE. The block also supports TV-out but we leave that
for another day when we have a hardware using it.
We implement parsing and handling of the "port" node,
and follow that to the DPI endpoint.
The clock divider used by the MCDE to divide down the
"lcdclk" (this has been designed for TV-like frequencies)
is represented by an ordinary clock provider internally
in the MCDE. This idea was inspired by the PL111 solution
by Eric Anholt: the divider also works very similar to
the Pl111 clock divider.
We take care to clear up some errors regarding the number
of available formatters and their type. We have 6 DSI
formatters and 2 DPI formatters.
Tested on the Samsung GT-I9070 Janice mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: upstreaming@lists.sr.ht
Link: https://patchwork.freedesktop.org/patch/msgid/20201112142925.2571179-2-linus.walleij@linaro.org
|
|
This adds a new DRM driver for the ST-Ericsson Multi Channel
Display Engine, MCDE display controller.
This hardware has three independent DSI hosts and can composit
and display several memory buffers onto an LCD display. It
was developed for several years inside of ST-Ericsson and
shipped with a few million mobile phones from Sony and Samsung,
as well as with the Snowball community development board.
The driver is currently pretty rudimentary but supports a
simple framebuffer so we can get penguins and graphics when
using these SoCs.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524092019.19355-1-linus.walleij@linaro.org
|
