| Age | Commit message (Collapse) | Author |
|---|
|
Move struct amdgpu_wb and helpers out of the monolithic header amdgpu.h
into its own dedicated header amdgpu_wb.h.
Add amdgpu_wb_init() and amdgpu_wb_fini() into amdgpu_wb.h.
Move functions amdgpu_device_wb_get(), amdgpu_device_wb_free(),
amdgpu_device_wb_init(), and amdgpu_device_wb_fini() out of
amdgpu_device.c into new dedicated amdgpu_wb.c file.
Removed static from functions amdgpu_device_wb_init() and amdgpu_device_wb_fini().
Rename functions amdgpu_device_wb_get(), amdgpu_device_wb_free(),
amdgpu_device_wb_init(), and amdgpu_device_wb_fini() into
amdgpu_wb_get(), amdgpu_wb_free(), amdgpu_wb_init(), and amdgpu_wb_fini().
Update amdgpu/Makefile to build amdgpu_wb.o.
This is part of the ongoing effort to reduce the size of amdgpu.h into
their own respective separate headers.
Signed-off-by: Shahyan Soltani <shahyan.soltani@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire legacy RAS reset/query operations for sdma v4_4_2
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire sdma v4.4.2 ACA support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow the user to disable kernel queues. This can be used
to free up vmid resources if kernel queues are not needed.
Set amdgpu.user_queue=2 to disable kernel queues.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's possible that some sdma instances aren't working so we shouldn't try
to use them from TTM. To achieve this, delay the call to
amdgpu_sdma_set_buffer_funcs_scheds after the rings have been tested, and
then use the 'ready' property to decide if a sched should be used or not.
Note that currently it's not doing much, because if the ring helper fails
for any ring, the whole sdma block init fails.
---
v5: check buffer_funcs_enabled from amdgpu_ttm_access_memory_sdma
---
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will allow the use of all of them for clear/fill buffer
operations.
Since drm_sched_entity_init requires a scheduler array, we
store schedulers rather than rings. For the few places that need
access to a ring, we can get it from the sched using container_of.
Since the code is the same for all sdma versions, add a new
helper amdgpu_sdma_set_buffer_funcs_scheds to set buffer_funcs_scheds
based on the number of sdma instances.
Note: the new sched array is identical to the amdgpu_vm_manager one.
These 2 could be merged.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA 4.4.x has increased transfer limits.
v2: fix harder, use shifts to make it more obvious
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All sdma versions used the same logic, so add a helper and move the
common code to a single place.
---
v2: pass amdgpu_vm_pte_funcs as well
v3: drop all the *_set_vm_pte_funcs one liners
v5: rebased
---
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move everything to the supported resets masks rather than
having an explicit misc checks for this.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than checking in the callbacks, check if the reset
type is supported in the caller.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a parameter to amdgpu_sdma_reset_engine() to let the
caller handle the kernel rings. This allows the kernel
rings to back up their unprocessed state if the reset comes in
via the drm scheduler rather than KFD.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the force completion handling into the common
engine reset function. No need to duplicate it for
every IP version.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.17-2025-07-01:
amdgpu:
- FAMS2 fixes
- OLED fixes
- Misc cleanups
- AUX fixes
- DMCUB updates
- SR-IOV hibernation support
- RAS updates
- DP tunneling fixes
- DML2 fixes
- Backlight improvements
- Suspend improvements
- Use scaling for non-native modes on eDP
- SDMA 4.4.x fixes
- PCIe DPM fixes
- SDMA 5.x fixes
- Cleaner shader updates for GC 9.x
- Remove fence slab
- ISP genpd support
- Parition handling rework
- SDMA FW checks for userq support
- Add missing firmware declaration
- Fix leak in amdgpu_ctx_mgr_entity_fini()
- Freesync fix
- Ring reset refactoring
- Legacy dpm verbosity changes
amdkfd:
- GWS fix
- mtype fix for ext coherent system memory
- MMU notifier fix
- gfx7/8 fix
radeon:
- CS validation support for additional GL extensions
- Bump driver version for new CS validation checks
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250701194707.32905-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Move guilty logic into the ring reset callbacks. This
allows each ring reset callback to better handle fence
errors and force completions in line with the reset
behavior for each IP. It also allows us to remove
the ring guilty callback since that logic now lives
in the reset callback.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the force completion handling into each ring
reset function so that each engine can determine
whether or not it needs to force completion on the
jobs in the ring.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Going forward, we'll need more than just the vmid. Add the
guilty amdgpu_fence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This got missed during SDMA 4.4.4 support.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For the suspend and resume process, exclusive access is not required.
Therefore, it can be moved out of the full access section to reduce the
duration of exclusive access.
v3:
Move suspend processes before hardware fini.
Remove twice call for bare metal.
v4:
Refine code
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement soft reset engine callback for SDMA 4.4.x IPs. This avoids IP
version check in generic implementation.
V2: Correct physical instance ID calculation in soft_reset_engine (Jesse)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Simplify SDMA v4_4_2 queue reset and stop operations by:
1. Removing GET_INST(SDMA0) conversion for ring->me
2. Using the logical instance ID (ring->me) directly
3. Maintaining consistent behavior with other SDMA queue operations
This change aligns with the existing queue handling logic where
ring->me already represents the correct instance identifier.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To avoid a cast when calling drm_dev_wedged_event(), replace pid and
task name inside of struct amdgpu_task_info with struct
drm_wedge_task_info.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-6-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
|
|
This patch removes the deprecated SDMA reset callback mechanism, which was previously used to register pre-reset and post-reset callbacks for SDMA engine resets.
The callback mechanism has been replaced with a more direct and efficient approach using `stop_queue` and `start_queue` functions in the ring's function table.
The SDMA reset callback mechanism allowed KFD and AMDGPU to register pre-reset and post-reset functions for handling SDMA engine resets.
However, this approach added unnecessary complexity and was no longer needed after the introduction of the `stop_queue` and `start_queue` functions in the ring's function table.
1. **Remove Callback Mechanism**:
- Removed the `amdgpu_sdma_register_on_reset_callbacks` function and its associated data structures (`sdma_on_reset_funcs`).
- Removed the callback registration logic from the SDMA v4.4.2 initialization code.
2. **Clean Up Related Code**:
- Removed the `sdma_v4_4_2_set_engine_reset_funcs` function, which was used to register the callbacks.
- Removed the `sdma_v4_4_2_engine_reset_funcs` structure, which contained the pre-reset and post-reset callback functions.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Register stop/start/soft_reset queue functions for sdma v4_4_2.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for per-queue reset on SDMA v4.4.2 when running with:
1. MEC firmware version 17 or later
2. DPM indicates SDMA reset is supported
v2: Fixed supported firmware versions (Lijo)
Signed-off-by: Jesse.Zhang <Jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
this temporarily reverts
commit 6ec04e38b2f6 ("drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA")
it cause a regression.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We should only increase the deferred errors in UMC block.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit updates the VM flush implementation for the SDMA engine.
- Added a new function `sdma_v4_4_2_get_invalidate_req` to construct the VM_INVALIDATE_ENG0_REQ
register value for the specified VMID and flush type. This function ensures that all relevant
page table cache levels (L1 PTEs, L2 PTEs, and L2 PDEs) are invalidated.
- Modified the `sdma_v4_4_2_ring_emit_vm_flush` function to use the new `sdma_v4_4_2_get_invalidate_req`
function. The updated function emits the necessary register writes and waits to perform a VM flush
for the specified VMID. It updates the PTB address registers and issues a VM invalidation request
using the specified VM invalidation engine.
- Included the necessary header file `gc/gc_9_0_sh_mask.h` to provide access to the required register
definitions.
v2: vm flush by the vm inalidation packet (Lijo)
v3: code stle and define thh macro for the vm invalidation packet (Christian)
v4: Format definition sdma vm invalidate packet (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gfx and page queues are per instance, so track them
per instance.
v2: drop extra parameter (Lijo)
Fixes: fdbfaaaae06b ("drm/amdgpu: Improve SDMA reset logic with guilty queue tracking")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the kfd suspend/resume code into the caller. That
is where the KFD is likely to detect a reset so on the KFD
side there is no need to call them. Also add a mutex to
lock the actual reset sequence.
v2: make the locking per instance
Fixes: bac38ca8c475 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For SRIOV, skip the SDMA queue reset and return
error. The engine/queue reset failure will trigger
FLR in the sequence.
v2: do not add queue reset support mask for sriov
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the case of poison inband log, the error type need to be specified
by checking the deferred or poison bit of status register.
v2: check both deferred and poison bit
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the trap irq processing for page queue of sdma442
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by and Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Added `sdma_v4_4_2_update_reset_mask` function to update the reset mask.
- update the sysfs reset mask to the `late_init` stage to ensure that the SMU initialization
and capability setup are completed before checking the SDMA reset capability.
- For IP versions 9.4.3 and 9.4.4, enable per-queue reset if the MEC firmware version is at least 0xb0 and PMFW supports queue reset.
- Add a TODO comment for future support of per-queue reset for IP version 9.5.0.
This change ensures that per-queue reset is only enabled when the MEC and PMFW support it.
v2: fix ip version (9.5.4 -> 9.5.0)(Lijo)
Suggested-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds a reset function pointer to the SDMA v4.4.2 page ring
functionality. The new function pointer `reset` is set to
`sdma_v4_4_2_reset_queue`, which is responsible for resetting the SDMA queue.
Changes:
- Add `reset` function pointer to `sdma_v4_4_2_page_ring_funcs`.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch includes the remaining improvements to the SDMA reset logic:
- Added `gfx_guilty` and `page_guilty` flags to track guilty queues.
- Updated the reset and resume functions to handle the guilty state.
- Cached the `rptr` before reset.
v2:
1.replace the caller with a guilty bool.
If the queue is the guilty one, set the rptr and wptr to the saved wptr value,
else, set the rptr and wptr to the saved rptr value. (Alex)
2. cache the rptr before the reset. (Alex)
v3: Keeping intermediate variables like u64 rwptr simplifies resotre rptr/wptr.(Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch introduces the `is_guilty` callbacks for the GFX and PAGE rings.
These callbacks check if a ring is guilty of causing a timeout or error.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Modify the `amdgpu_sdma_reset_engine` function to accept a `suspend_user_queues` parameter.
- This parameter allows the function to conditionally suspend and resume user queues during SDMA resets.
- Ensure that user queues are suspended only when necessary to avoid unnecessary overhead and potential deadlocks.
- Restart the scheduler's work queue for the GFX and page rings after the reset to allow new tasks to be submitted.
This change improves synchronization between the KGD and the KFD during SDMA resets,
ensuring proper handling of user queues and avoiding race conditions.
V2: replace the ring_lock with the existed the scheduler
locks for the queues (ring->sched) on the sdma engine.(Alex)
v3: call drm_sched_wqueue_stop() rather than job_list_lock.
If a GPU ring reset was already initiated for one ring at amdgpu_job_timedout,
skip resetting that ring and call drm_sched_wqueue_stop()
for the other rings (Alex)
replace the common lock (sdma_reset_lock) with DQM lock to
to resolve reset races between the two driver sections during KFD eviction.(Jon)
Rename the caller to Reset_src and
Change AMDGPU_RESET_SRC_SDMA_KGD/KFD to AMDGPU_RESET_SRC_SDMA_HWS/RING (Jon)
v4: restart the wqueue if the reset was successful,
or fall back to a full adapter reset. (Alex)
move definition of reset source to enumeration AMDGPU_RESET_SRCS, and
check reset src in amdgpu_sdma_reset_instance (Jon)
v5: Call amdgpu_amdkfd_suspend/resume at the start/end of reset function respectively under !SRC_HWS
conditions only (Jon)
v6: replace the paramter src with a bool suspend_user_queues,
remove the paramter src in pre/post func. (Jon)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Suggested-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch refactors the SDMA reset functionality in the `sdma_v4_4_2` driver
to improve modularity and support shared usage between AMDGPU and KFD. The
changes include:
1. **Refactored SDMA Reset Logic**:
- Split the `sdma_v4_4_2_reset_queue` function into two separate functions:
- `sdma_v4_4_2_stop_queue`: Stops the SDMA queue before reset.
- `sdma_v4_4_2_restore_queue`: Restores the SDMA queue after reset.
- These functions are now used as callbacks for the shared reset mechanism.
2. **Added Callback Support**:
- Introduced a new structure `sdma_v4_4_2_reset_funcs` to hold the stop and
restore callbacks.
- Added `sdma_v4_4_2_set_reset_funcs` to register these callbacks with the
shared reset mechanism using `amdgpu_set_on_reset_callbacks`.
3. **Fixed Reset Queue Function**:
- Modified `sdma_v4_4_2_reset_queue` to use the shared `amdgpu_sdma_reset_queue`
function, ensuring consistency across the driver.
This patch ensures that SDMA reset functionality is more modular, reusable, and
aligned with the shared reset mechanism between AMDGPU and KFD.
v2: Renamed sdma_v4_4_2_set_reset_funcs to sdma_v4_4_2_set_engine_reset_funcs.
Renamed sdma_v4_4_2_reset_funcs to sdma_v4_4_2_engine_reset_funcs.(Alex)
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch introduces shared SDMA reset functionality between AMDGPU and KFD.
The implementation includes the following key changes:
1. Added `amdgpu_sdma_reset_queue`:
- Resets a specific SDMA queue by instance ID.
- Invokes registered pre-reset and post-reset callbacks to allow KFD and AMDGPU
to save/restore their state during the reset process.
2. Added `amdgpu_set_on_reset_callbacks`:
- Allows KFD and AMDGPU to register callback functions for pre-reset and
post-reset operations.
- Callbacks are stored in a global linked list and invoked in the correct order
during SDMA reset.
This patch ensures that both AMDGPU and KFD can handle SDMA reset events
gracefully, with proper state saving and restoration. It also provides a flexible
callback mechanism for future extensions.
v2: fix CamelCase and put the SDMA helper into amdgpu_sdma.c (Alex)
v3: rename the `amdgpu_register_on_reset_callbacks` function to
`amdgpu_sdma_register_on_reset_callbacks`
move global reset_callback_list to struct amdgpu_sdma (Alex)
v4: Update the reset callback function description and
rename the reset function to amdgpu_sdma_reset_engine (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of is_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of get_clockgating_state.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ACA error types managed by driver a direct 1:1
correspondence with those managed by firmware.
To address this, for each ACA bank, include
both the ACA error type and the ACA SMU type.
This addition is useful for creating CPER records.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <keivnyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Context empty interrupt is enabled for SDMA 4.4.2. Add a handler for
context empty interrupt so that it is disposed of fast, and not
propagated to KFD layer.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove apu check in sdma queue reset.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The sdma context empty interrupt is dropped in amdgpu_irq_dispatch
as unregistered interrupt src_id 243, this interrupt accounts to 1/3 of
total interrupts and causes IH primary ring overflow when running
stressful benchmark application. Disable this interrupt has no side
effect found.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's unused.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add sdma444 basic support
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFXOFF is not valid for these IP versions. Also, SDMA v4.4.2 is not in
GFX domain.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
