| Age | Commit message (Collapse) | Author |
|---|
|
Introduce devm_acpm_get_by_phandle() to standardize how consumer
drivers acquire a handle to the ACPM IPC interface. Enforce the
use of the "samsung,acpm-ipc" property name across the SoC and
simplify the boilerplate code in client drivers.
The first consumer of this helper is the Exynos ACPM Thermal Management
Unit (TMU) driver. The TMU utilizes a hybrid management approach: direct
register access from the Application Processor (AP) is restricted to the
interrupt pending (INTPEND) registers for event identification.
High-level functional tasks, such as sensor initialization, threshold
programming, and temperature reads, are delegated to the ACPM firmware
via this IPC interface.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-6-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The Thermal Management Unit (TMU) on the Google GS101 SoC is managed
through a hybrid model shared between the kernel and the Alive Clock
and Power Manager (ACPM) firmware.
Add the protocol helpers required to communicate with the ACPM for
thermal operations, including initialization, threshold configuration,
temperature reading, and system suspend/resume handshakes.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-5-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Replace the embedded `struct acpm_ops` inside `struct acpm_handle` with
a pointer to a `const struct acpm_ops`.
Previously, the operations structure was embedded directly within the
handle and populated dynamically at runtime via `acpm_setup_ops()`.
This resulted in mutable function pointers and unnecessary per-instance
memory overhead.
By defining `exynos_acpm_driver_ops` statically as a `const` structure,
the function pointers are now safely housed in the read-only `.rodata`
section. This improves security by preventing function pointer
overwrites, saves memory, and slightly reduces initialization overhead
in `acpm_probe()`.
Consequently, update all consumer drivers (clk, mfd) to access the
operations via the new pointer indirection (`->ops->`). Finally, fix
the previously empty kernel-doc description for the ops member to
reflect its new pointer nature.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-4-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Rename the `dvfs_ops` and `pmic_ops` members of `struct acpm_ops` to
`dvfs` and `pmic` respectively.
Since these members are housed within the `acpm_ops` structure and
utilize the `acpm_*_ops` types, the `_ops` suffix on the variable names
creates unnecessary redundancy (e.g., `handle.ops.dvfs_ops`).
This cleanup removes the stuttering, leading to cleaner consumer code.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/linux-samsung-soc/CADrjBPqzKpcd9vuCmNUptCUPyPpPbHcc19-7kN-1c0RpW1e5DQ@mail.gmail.com/T/#mcce154a7e0c6cd1ca6cd5a1e37541ed7a85a84d4 [1]
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-3-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Rename the `n_cmd` member of `struct acpm_rx_data` to `cmdcnt` to
maintain consistent nomenclature across the driver (aligning with
`txcnt`, `rxcnt`, and transfer helpers).
With the member renamed, annotate the dynamically allocated `cmd`
pointer with the `__counted_by_ptr(cmdcnt)` macro to improve runtime
bounds checking.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-2-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Both the DVFS and PMIC ACPM sub-drivers implement similar local helper
functions (acpm_dvfs_set_xfer and acpm_pmic_set_xfer) to initialize the
acpm_xfer structure before sending an IPC message.
Move this logic into a single centralized helper, acpm_set_xfer(),
in the core ACPM driver to reduce boilerplate, eliminate code
duplication, and prepare for the upcoming ACPM TMU helper sub-driver
which will also utilize this method.
Note that there is no change in underlying functionality. While the old
acpm_pmic_set_xfer() unconditionally assigned the RX buffer parameters
(xfer->rxd and xfer->rxcnt), the new unified helper introduces a
'response' boolean. All updated PMIC call sites now explicitly pass
'true' for this argument. This ensures the unified helper takes the
'if (response)' branch, performing the exact same assignments and
preserving the original PMIC behavior.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260515-acpm-tmu-helpers-v2-1-8ca011d5a965@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Sashiko identified a possible infinite loop [1].
ACPM IPC sequence numbers are tracked via a 64-bit bitmap. Previously,
acpm_prepare_xfer() used a do...while loop to search for a free
sequence number.
If all 63 available sequence numbers are leaked due to transient
hardware timeouts or mailbox failures, the bitmap becomes full.
The next call to acpm_prepare_xfer() would enter an infinite loop.
Fix this by utilizing the kernel's optimized bitmap search functions
(find_next_zero_bit / find_first_zero_bit). If the pool is completely
exhausted, log the failure and return -EBUSY to allow the kernel to
fail gracefully instead of hanging.
Furthermore, drop the allocation loop entirely. Because
acpm_prepare_xfer() is strictly called under the 'tx_lock' mutex,
sequence number allocations are perfectly serialized. If
find_next_zero_bit() locates a free bit, a single
test_and_set_bit_lock() is mathematically guaranteed to succeed.
To enforce this locking invariant, wrap the allocation in a
WARN_ON_ONCE. If the atomic set fails, it indicates the driver's
mutex serialization is fundamentally broken. The warning generates a
stack trace for debugging, while returning -EIO immediately aborts the
transfer to prevent silent payload corruption.
Cc: stable@vger.kernel.org
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-7-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Sashiko identified memory ordering races in [1].
The ACPM driver uses a globally shared 'bitmap_seqnum' to track
available sequence numbers. Even though threads now strictly free their
own sequence numbers, the allocation and freeing of these bits across
concurrent threads are effectively lockless operations and require
explicit LKMM memory barriers.
Previously, the driver used plain bitwise operators (test_bit, set_bit,
clear_bit), which lack ordering guarantees. This creates two race
conditions on weakly ordered architectures like ARM64:
1. Polling Release Violation: The polling thread copies its payload and
calls clear_bit(). Without a release barrier, the CPU can reorder
the memory operations, making the cleared bit globally visible
before the payload reads have fully completed.
2. TX Acquire Violation: The TX thread loops on test_bit(), calls
set_bit(), and then wipes the payload buffer via memset(). Without
an acquire barrier, the CPU can speculatively execute the memset()
before the bit is safely and formally claimed.
If these reorderings overlap, a new TX thread can claim the sequence
number and overwrite the buffer while the original polling thread is
still actively reading from it.
Fix this by upgrading the bitwise operators. Wrap the TX allocation in
test_and_set_bit_lock() to establish formal LKMM Acquire semantics, and
pair it with clear_bit_unlock() in the polling path to enforce Release
semantics.
Cc: stable@vger.kernel.org
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260423-acpm-fixes-sashiko-reports-v1-0-2217b790925e%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-6-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Sashiko identified severe races in the polling state machine [1].
In the ACPM driver's polling mode, threads waited for responses by
monitoring the globally shared 'bitmap_seqnum'. This caused false
timeouts because if a thread processed its response and freed the
sequence number, a concurrent TX thread could immediately reallocate
it before the polling thread woke up.
Additionally, the driver suffered from a cross-thread Use-After-Free
(UAF) preemption race. Previously, acpm_get_rx() cleared the sequence
number of whichever RX message it drained from the hardware queue. This
meant Thread A could globally free Thread B's sequence slot while
Thread B was asleep. A new Thread C could then steal the slot,
overwrite the buffer, and leave Thread B to wake up to corrupted state
or a timeout.
Fix this by rewriting the polling state machine:
1. Decouple polling from the global allocator by introducing a per-slot
'completed' flag, synchronized via smp_store_release() and
smp_load_acquire().
2. Strip acpm_get_saved_rx() out of acpm_get_rx() to make it a pure
queue-draining function. Introduce a 'native_match' boolean argument
which evaluates to true only if the thread natively processed its
own sequence number during the call. This explicitly informs the
polling loop whether it must retrieve its payload from the
cross-thread cache.
3. Centralize the cache fallback and sequence number free (clear_bit)
inside the polling loop. Crucially, the free operation now strictly
targets the thread's own TX sequence number (xfer->txd[0]), rather
than the drained RX sequence number. This enforces strict ownership:
a thread only ever frees its own allocated sequence slot, and only
at the exact moment it completes its poll, eliminating the UAF
window.
Furthermore, explicitly guard the 'native_match' assignment with an
if (rx_seqnum == tx_seqnum) check, even for zero-length (no payload)
responses. While an unguarded assignment wouldn't crash (because the
cache fallback acpm_get_saved_rx() safely returns early on zero-length
transfers) doing so would "lie" to the state machine. If a thread
drained the queue and found another thread's zero-length message,
setting native_match = true would falsely convince the polling loop
that it natively handled its own response. Maintaining a rigorous state
machine requires that native_match is only set when a thread explicitly
processes its own sequence number.
Cc: stable@vger.kernel.org
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260429-acpm-fixes-sashiko-reports-v3-0-47cf74ab09ad%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-5-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Sashiko identified the leak at [1].
The ACPM driver allocates hardware mailbox channels using
`mbox_request_channel()` during `acpm_channels_init()`. However, the
driver lacked a `.remove` callback and did not free these channels on
subsequent error paths inside `acpm_probe()`.
Additionally, if `acpm_achan_alloc_cmds()` failed during the channel
initialization loop, the function returned immediately, bypassing the
manual cleanup and permanently leaking any channels successfully
requested in previous loop iterations.
Fix this by modifying `acpm_free_mbox_chans()` to match the `devres`
action signature and registering it via `devm_add_action_or_reset()`.
Cc: stable@vger.kernel.org
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-2-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Sashiko identified a cross-thread RX length corruption bug when
reviewing the thermal addition to ACPM [1].
When multiple threads concurrently send IPC requests, the ACPM polling
mechanism can encounter responses belonging to other threads. To drain
the queue, the driver saves these concurrent responses into an internal
cache (`rx_data->cmd`) to be retrieved later by the owning thread.
Previously, the driver incorrectly used `xfer->rxcnt` (the expected
receive length of the *current* polling thread) when copying data for
*other* threads into this cache. If the threads expected responses of
different lengths, this resulted in buffer underflows (leading to reads
of uninitialized memory) or potential buffer overflows.
Fix this by replacing the boolean `response` flag in
`struct acpm_rx_data` with `rxcnt`, caching the exact expected receive
length for each specific transaction during transfer preparation. Use
this cached length when saving concurrent responses.
Consequently, ensure that `xfer->rxcnt` is explicitly zeroed in driver
helpers (e.g., `acpm_dvfs_set_xfer`) for fire-and-forget messages to
prevent uninitialized stack garbage from being interpreted as a massive
expected receive length.
Cc: stable@vger.kernel.org
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1]
Reported-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Closes: https://lore.kernel.org/r/20260426210255.73674-1-titouan.ameline@gmail.com/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-1-43b5ee7f1674@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
All the functions operating on the 'handle' pointer are claiming it is a
pointer to const thus they should not modify the handle. In fact that's
a false statement, because first thing these functions do is drop the
cast to const with container_of:
struct acpm_info *acpm = handle_to_acpm_info(handle);
And with such cast the handle is easily writable with simple:
acpm->handle.ops.pmic_ops.read_reg = NULL;
The code is not correct logically, either, because functions like
acpm_get_by_node() and acpm_handle_put() are meant to modify the handle
reference counting, thus they must modify the handle. Modification here
happens anyway, even if the reference counting is stored in the
container which the handle is part of.
The code does not have actual visible bug, but incorrect 'const'
annotations could lead to incorrect compiler decisions.
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260224104203.42950-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Use __counted_by_ptr() attribute on the acpm_xfer buffers so UBSAN will
validate runtime that we do not pass over the buffer size, thus making
code safer.
Usage of __counted_by_ptr() (or actually __counted_by()) requires that
counter is initialized before counted array.
Tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260219-firmare-acpm-counted-v2-3-e1f7389237d3@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Struct acpm_xfer holds two buffers with u32 commands - rxd and txd - and
counts their size by rxlen and txlen. "len" suffix is here ambiguous,
so could mean length of the buffer or length of commands, and these are
not the same since each command is u32. Rename these to rxcnt and
txcnt, and change their usage to count the number of commands in each
buffer.
This will have a benefit of allowing to use __counted_by_ptr later.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260219-firmare-acpm-counted-v2-2-e1f7389237d3@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
acpm_pmic_to_linux_err() uses an unsigned integer obtained from messages
as index of array to map them to error codes. Array index cannot be
negative, so make that explicit.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260219-firmare-acpm-counted-v2-1-e1f7389237d3@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Register by hand a platform device for the ACPM clocks.
The ACPM clocks are not modeled as a DT child of ACPM because:
1/ they don't have their own resources.
2/ they are not a block that can be reused. The clock identifying
data is reduced (clock ID, clock name and mailbox channel ID)
and may differ from a SoC to another.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-3-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add ACPM DVFS protocol handler. It constructs DVFS messages that
the APM firmware can understand.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-2-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
ACPM PMIC command handlers returned a u8 value when they should
have returned either zero or negative error codes.
Translate the APM PMIC errno to linux errno.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-input/aElHlTApXj-W_o1r@stanley.mountain/
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The mailbox framework has a single inflight request at a time. If
a request is sent while another is still active, it will be queued
to the mailbox core ring buffer.
ACPM protocol did not serialize the calls to the mailbox subsystem so we
could start the timeout ticks in parallel for multiple requests, while
just one was being inflight.
Consider a hypothetical case where the xfer timeout is 100ms and an ACPM
transaction takes 90ms:
| 0ms: Message #0 is queued in mailbox layer and sent out, then sits
| at acpm_dequeue_by_polling() with a timeout of 100ms
| 1ms: Message #1 is queued in mailbox layer but not sent out yet.
| Since send_message() doesn't block, it also sits at
| acpm_dequeue_by_polling() with a timeout of 100ms
| ...
| 90ms: Message #0 is completed, txdone is called and message #1 is sent
| 101ms: Message #1 times out since the count started at 1ms. Even though
| it has only been inflight for 11ms.
Fix the problem by moving mbox_send_message() and mbox_client_txdone()
immediately after the message has been written to the TX queue and while
still keeping the ACPM TX queue lock. We thus tie together the TX write
with the doorbell ring and mark the TX as done after the doorbell has
been rung. This guarantees that the doorbell has been rang before
starting the timeout ticks. We should also see some performance
improvement as we no longer wait to receive a response before ringing
the doorbell for the next request, so the ACPM firmware shall be able to
drain faster the TX queue. Another benefit is that requests are no
longer able to ring the doorbell one for the other, so it eases
debugging. Finally, the mailbox software queue will always contain a
single doorbell request due to the serialization done at the ACPM TX
queue level. Protocols like ACPM, that handle their own hardware queues
need a passthrough mailbox API, where they are able to just ring the
doorbell or flip a bit directly into the mailbox controller. The mailbox
software queue mechanism, the locking done into the mailbox core is not
really needed, so hopefully this lays the foundation for a passthrough
mailbox API.
Reported-by: André Draszik <andre.draszik@linaro.org>
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
|
|
Correct kerneldoc warnings after commit a8dc26a0ec43 ("firmware:
exynos-acpm: introduce devm_acpm_get_by_node()") changed the function
prototype:
exynos-acpm.c:672: warning: Function parameter or struct member 'acpm_np' not described in 'acpm_get_by_node'
exynos-acpm.c:672: warning: expecting prototype for acpm_get_by_phandle(). Prototype was for acpm_get_by_node() instead
While touching the lines, change the name of device_node pointer to
'np' to match convention.
Fixes: a8dc26a0ec43 ("firmware: exynos-acpm: introduce devm_acpm_get_by_node()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504222051.7TqaSQ48-lkp@intel.com/
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250424203308.402168-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
To allow ACPM clients to simply be children of the ACPM node in DT,
they need to be able to get the ACPM handle based on that ACPM node
directly.
Add an API to allow them to do so, devm_acpm_get_by_node().
At the same time, the previous approach of acquiring the ACPM handle
via a DT phandle is now obsolete and we can remove
devm_acpm_get_by_phandle(), which was there to facilitate that. There
are no existing or anticipated upcoming users of that API, because all
clients should be children of the ACPM node going forward.
Note that no DTs have been merged that use the old approach, so doing
this API change in this driver now will not affect any existing DTs or
client drivers.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250327-acpm-children-v1-2-0afe15ee2ff7@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
ACPM clients (PMIC, clocks, etc.) will be modeled as children of the
ACPM interface. Populate children platform_devices from device tree.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250327-acpm-children-v1-1-0afe15ee2ff7@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
This driver emits error messages when client drivers are trying to get
an interface handle to this driver here before this driver has
completed _probe().
Given this driver returns -EPROBE_DEFER in that case, this is not an
error and shouldn't be emitted to the log, similar to how
dev_err_probe() behaves, so just remove them.
This change also allows us to simplify the logic around releasing of
the acpm_np handle.
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250319-acpm-fixes-v2-2-ac2c1bcf322b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
ACPM commands that return more than 8 bytes currently don't work
correctly, as this driver ignores any such returned bytes.
This is evident in at least acpm_pmic_bulk_read(), where up to 8
registers can be read back and those 8 register values are placed
starting at &xfer->rxd[8].
The reason is that xfter->rxlen is initialized with the size of a
pointer (8 bytes), rather than the size of the byte array that pointer
points to (16 bytes)
Update the code such that we set the number of bytes expected to be the
size of the rx buffer.
Note1: While different commands have different lengths rx buffers, we
have to specify the same length for all rx buffers since acpm_get_rx()
assumes they're all the same length.
Note2: The different commands also have different lengths tx buffers,
but before switching the code to use the minimum possible length, some
more testing would have to be done to ensure this works correctly in
all situations. It seems wiser to just apply this fix here without
additional logic changes for now.
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250319-acpm-fixes-v2-1-ac2c1bcf322b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
We need to access the PMIC during late system shutdown and at that time
we are not allowed to sleep anymore.
To make this case work, and since we can't detect this case in a
non-racy way, switch to using udelay() unconditionally, instead of
usleep_range().
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250325-acpm-atomic-v3-2-c66aae7df925@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
acpm_dequeue_by_polling() uses a loop counter and assumes that each
iteration of the loop takes 20us. It may take longer, though, because
usleep_range() may sleep a different amount.
Switch to using ktime_get() / ktime_before() to detect the timeout
condition more reliably.
This change also makes the code easier to follow and it allows us to
adjust the sleep if necessary, without having to adjust the loop
counter exit condition.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250325-acpm-atomic-v3-1-c66aae7df925@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
When we're polling for responses and get a response that corresponds to
another request, we save the RX data in order to drain the RX queue.
If the response for the current request is not found in the request's
iteration of the queue, or if the queue is empty, we must check whether
the RX data was saved by a previous request when it drained the RX queue.
We failed to check for already saved responses when the queue was empty,
and requests could time out. Check saved RX before bailing out on empty
RX queue.
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Reported-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250324-acpm-drained-rx-queue-v1-1-577774335151@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
There is a spelling mistake in a dev_err_probe message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250217091341.297401-1-colin.i.king@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Alive Clock and Power Manager (ACPM) Message Protocol is defined for
the purpose of communication between the ACPM firmware and masters
(AP, AOC, ...). ACPM firmware operates on the Active Power Management
(APM) module that handles overall power activities.
ACPM and masters regard each other as independent hardware component and
communicate with each other using mailbox messages and shared memory.
This protocol driver provides the interface for all the client drivers
making use of the features offered by the APM. Add ACPM protocol support.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250213-gs101-acpm-v9-2-8b0281b93c8b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
