| Age | Commit message (Collapse) | Author |
|---|
|
The stm32 platform started out as a Cortex-M based microcontoller
platform in 2007, with a few of the older products gaining Linux kernel
support in 2016. These days, the only relevant chips for Linux are the
stm32mp1 (Cortex-A7) and stm32mp2 (Cortex-A35) product lines, with the
microcontrollers running smaller RTOSs on new products.
The microcontrollers were marked as deprecated in the linux-7.3LTS
release, which will remain supported for a few more years and
is expected to be sufficient for any of the remaining original users.
Remove the MCU support now, leaving only the stm32mp SoCs in the platform.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Christophe Parant <c.parant@phytec.fr>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Acked-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260914140821.1805449-12-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The Cortex-M3/M4/M7 cores were designed as a replacement for the earlier
ARM7TDMI and ARM9TDMI microarchitectures used in older microcontrollers.
At the moment, Linux can run these cores either when they are integrated
into a larger SoC, or as standalone microcontrollers. While there was
a lot of development work going into Cortex-M support from 2011 to 2016,
this largely stopped when it became clear that Zephyr and other RTOS
had taken over that market. To date, the only Cortex-M based based
microcontroller boards supported upstream are reference implementations.
Schedule these for removal after the next LTS kernel, so if any users
remain that want to update their kernels, they can stay on that
version for a few years before having to maintain the platform support
out of tree.
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # NXP LPC18xx/LPC43xx
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> # MPS2
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Frank Li <Frank.Li@nxp.com> # i.MX
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The STM32H747 is a dual-core MCU (Cortex-M7 running up to 480 MHz +
Cortex-M4 running up to 240 MHz) containing from 1 to 2 Mbytes of Flash
memory and 1 Mbyte of internal RAM.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Drop auto-selecting the driver, so it can be built either as a module or
built-in.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240620083115.204362-8-antonio.borneo@foss.st.com
|
|
Build the proper driver by selecting the appropriate config flag.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240620083115.204362-3-antonio.borneo@foss.st.com
|
|
Introduce a STM32 firewall framework that offers to firewall consumers
different firewall services such as the ability to check their access
rights against their firewall controller(s).
The STM32 firewall framework offers a generic API for STM32 firewall
controllers that is defined in their drivers to best fit the
specificity of each firewall.
There are various types of firewalls:
-Peripheral firewalls that filter accesses to peripherals
-Memory firewalls that filter accesses to memories or memory regions
-No type for undefined type of firewall
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
This patch adds initial support of STM32MP151 microprocessor (MPU)
based on Arm Cortex-A7. New Cortex-A infrastructure (gic, timer,...)
are selected if ARCH_MULTI_V7 is defined.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
There are a number of old Makefile.boot files that remain from the
multiplatform conversion, and three that are still in use.
These provide the "ZRELADDR", "PARAMS_PHYS" and "INITRD_PHYS" values
that are platform specific. It turns out that we can generally just
derive this from information that is available elsewhere:
- ZRELADDR is normally detected at runtime with the
CONFIG_AUTO_ZRELADDR flag, but also needed to be passed to
for 'make uImage'. In a multiplatform kernel, one always has
to pass this as the $(LOADADDR) variable, but in the StrongARM
kernels we can derive it from the sum of $(CONFIG_PHYS_OFFSET)
and $(TEXT_OFFSET) that are already known.
- PARAMS_PHYS and INITRD_PHYS are only used for bootpImage, which
in turn is only used for the pre-ATAGS 'param_struct' based boot
interface on StrongARM based machines with old boot loaders.
They can both be derived from CONFIG_PHYS_OFFSET and a machine
specific offset for the initrd, so all of the logic for these
can be part of arch/arm/boot/bootp/Makefile.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds initial support of STM32MP13 microprocessor family
based on Arm Cortex-A7. New Cortex-A infrastructure (gic, timer,...)
are selected if ARCH_MULTI_V7 is defined.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
The STM32H750 is a Cortex-M7 MCU running at 480MHz
and containing 128KBytes internal flash, 1MiB SRAM.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Link: https://lore.kernel.org/r/20200924101113.4528-1-alexandre.torgue@st.com
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
|
|
This appeared after the global fixups by commit e32465429490 ("ARM: use
"depends on" for SoC configs instead of "if" after prompt"). Fix it now.
Link: https://lore.kernel.org/r/20190710051320.8738-1-yamada.masahiro@socionext.com
Fixes: e32465429490 ("ARM: use "depends on" for SoC configs instead of "if" after prompt")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Make sure that ARM errata 814220 is selected by STM32MP157 SoC
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch enables AMBA support for stm32 family.
stm32 family embeds different amba pl180 variants.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
To be able to reboot the platform we need to use armv7m_restart for STM32
SoCs using ARMv7 cores.
Fixes: e0644101bd2f ("ARM: mach-stm32: prepare stm32 family to welcome armv7 architecture)
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
As both STM32F4 and STM32F7 SoCs embeds an AMBA PL180 mmci IP,
we need to enable AMBA support in mach-stm32.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
This patch adds initial support of STM32MP157 microprocessor (MPU)
based on Arm Cortex-A7. New Cortex-A infrastructure (gic, timer,...)
are selected if ARCH_MULTI_V7 is defined.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
This patch prepares the STM32 machine for the integration of Cortex-A
based microprocessor (MPU), on top of the existing Cortex-M
microcontroller family (MCU). Since both MCUs and MPUs are sharing
common hardware blocks we can keep using ARCH_STM32 flag for most of
them. If a hardware block is specific to one family we can use either
ARM_SINGLE_ARMV7M or ARCH_MULTI_V7 flag.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Uniformize STMicroelectronics copyrights header
Add SPDX identifier
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
CC: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Add new st,stm32f769 compatible machine name for STM32F769 MCU and update
documentation.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
This patch introduces the MACH_STM32F769 to make possible to only select
STM32F769 pinctrl driver.
By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
This patch introduces the MACH_STM32F469 to make possible to only select
STM32F469 pinctrl driver
By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The STM32H743 is a Cortex-M7 MCU running at 400MHz and containing 1MBytes
internal RAM.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
|
|
This patch introduces the MACH_STM32H743 to make possible to only select
STM32H743 pinctrl driver
By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
|
|
Create a dedicated Kconfig file in mach-stm32/ and move existing stm32
configs inside.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
|
|
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
|
|
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
|
|
STMicrolectronics's STM32 series is a family of Cortex-M
microcontrollers. It is used in various applications, and
proposes a wide range of peripherals.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
