diff options
Diffstat (limited to 'include/drm')
| -rw-r--r-- | include/drm/drm_atomic_helper.h | 22 | ||||
| -rw-r--r-- | include/drm/drm_bridge.h | 249 | ||||
| -rw-r--r-- | include/drm/drm_pagemap.h | 17 |
3 files changed, 102 insertions, 186 deletions
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 53382fe93537..e154ee4f0696 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -60,6 +60,12 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, int drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_atomic_state *state); int drm_atomic_helper_check_crtc_primary_plane(struct drm_crtc_state *crtc_state); +void drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_commit_crtc_disable(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev, + struct drm_atomic_state *state); int drm_atomic_helper_check(struct drm_device *dev, struct drm_atomic_state *state); void drm_atomic_helper_commit_tail(struct drm_atomic_state *state); @@ -89,8 +95,24 @@ drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state); +void drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev, + struct drm_atomic_state *state); + void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, struct drm_atomic_state *state); + +void drm_atomic_helper_commit_writebacks(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_crtc_enable(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev, + struct drm_atomic_state *state); + void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *old_state); diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 0ff7ab4aa868..dbafe136833f 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -176,33 +176,17 @@ struct drm_bridge_funcs { /** * @disable: * - * The @disable callback should disable the bridge. + * This callback should disable the bridge. It is called right before + * the preceding element in the display pipe is disabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @disable vfunc. If the preceding element is a &drm_encoder + * it's called right before the &drm_encoder_helper_funcs.disable, + * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms + * hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is disabled via one of: - * - * - &drm_bridge_funcs.disable - * - &drm_bridge_funcs.atomic_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms. - * * The @disable callback is optional. * * NOTE: @@ -215,34 +199,17 @@ struct drm_bridge_funcs { /** * @post_disable: * - * The bridge must assume that the display pipe (i.e. clocks and timing - * signals) feeding this bridge is no longer running when the - * @post_disable is called. + * This callback should disable the bridge. It is called right after the + * preceding element in the display pipe is disabled. If the preceding + * element is a bridge this means it's called after that bridge's + * @post_disable function. If the preceding element is a &drm_encoder + * it's called right after the encoder's + * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare + * or &drm_encoder_helper_funcs.dpms hook. * - * This callback should perform all the actions required by the hardware - * after it has stopped receiving signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is post-disabled (unless marked otherwise by the - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.post_disable - * - &drm_bridge_funcs.atomic_post_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms + * The bridge must assume that the display pipe (i.e. clocks and timing + * signals) feeding it is no longer running when this callback is + * called. * * The @post_disable callback is optional. * @@ -285,30 +252,18 @@ struct drm_bridge_funcs { /** * @pre_enable: * - * The display pipe (i.e. clocks and timing signals) feeding this bridge - * will not yet be running when the @pre_enable is called. - * - * This callback should perform all the necessary actions to prepare the - * bridge to accept signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is pre-enabled (unless marked otherwise by - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.pre_enable - * - &drm_bridge_funcs.atomic_pre_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: + * This callback should enable the bridge. It is called right before + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @pre_enable function. If the preceding element is a + * &drm_encoder it's called right before the encoder's + * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or + * &drm_encoder_helper_funcs.dpms hook. * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - &drm_encoder_helper_funcs.commit + * The display pipe (i.e. clocks and timing signals) feeding this bridge + * will not yet be running when this callback is called. The bridge must + * not enable the display link feeding the next bridge in the chain (if + * there is one) when this callback is called. * * The @pre_enable callback is optional. * @@ -322,31 +277,19 @@ struct drm_bridge_funcs { /** * @enable: * - * The @enable callback should enable the bridge. + * This callback should enable the bridge. It is called right after + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called after that + * bridge's @enable function. If the preceding element is a + * &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or + * &drm_encoder_helper_funcs.dpms hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is enabled via one of: - * - * - &drm_bridge_funcs.enable - * - &drm_bridge_funcs.atomic_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - drm_encoder_helper_funcs.commit - * * The @enable callback is optional. * * NOTE: @@ -359,30 +302,17 @@ struct drm_bridge_funcs { /** * @atomic_pre_enable: * - * The display pipe (i.e. clocks and timing signals) feeding this bridge - * will not yet be running when the @atomic_pre_enable is called. - * - * This callback should perform all the necessary actions to prepare the - * bridge to accept signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is pre-enabled (unless marked otherwise by - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.pre_enable - * - &drm_bridge_funcs.atomic_pre_enable + * This callback should enable the bridge. It is called right before + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @atomic_pre_enable or @pre_enable function. If the preceding + * element is a &drm_encoder it's called right before the encoder's + * &drm_encoder_helper_funcs.atomic_enable hook. * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - &drm_encoder_helper_funcs.commit + * The display pipe (i.e. clocks and timing signals) feeding this bridge + * will not yet be running when this callback is called. The bridge must + * not enable the display link feeding the next bridge in the chain (if + * there is one) when this callback is called. * * The @atomic_pre_enable callback is optional. */ @@ -392,31 +322,18 @@ struct drm_bridge_funcs { /** * @atomic_enable: * - * The @atomic_enable callback should enable the bridge. + * This callback should enable the bridge. It is called right after + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called after that + * bridge's @atomic_enable or @enable function. If the preceding element + * is a &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.atomic_enable hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is enabled via one of: - * - * - &drm_bridge_funcs.enable - * - &drm_bridge_funcs.atomic_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - drm_encoder_helper_funcs.commit - * * The @atomic_enable callback is optional. */ void (*atomic_enable)(struct drm_bridge *bridge, @@ -424,32 +341,16 @@ struct drm_bridge_funcs { /** * @atomic_disable: * - * The @atomic_disable callback should disable the bridge. + * This callback should disable the bridge. It is called right before + * the preceding element in the display pipe is disabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @atomic_disable or @disable vfunc. If the preceding element + * is a &drm_encoder it's called right before the + * &drm_encoder_helper_funcs.atomic_disable hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is disabled via one of: - * - * - &drm_bridge_funcs.disable - * - &drm_bridge_funcs.atomic_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms. - * * The @atomic_disable callback is optional. */ void (*atomic_disable)(struct drm_bridge *bridge, @@ -458,34 +359,16 @@ struct drm_bridge_funcs { /** * @atomic_post_disable: * - * The bridge must assume that the display pipe (i.e. clocks and timing - * signals) feeding this bridge is no longer running when the - * @atomic_post_disable is called. - * - * This callback should perform all the actions required by the hardware - * after it has stopped receiving signals from the preceding element. + * This callback should disable the bridge. It is called right after the + * preceding element in the display pipe is disabled. If the preceding + * element is a bridge this means it's called after that bridge's + * @atomic_post_disable or @post_disable function. If the preceding + * element is a &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.atomic_disable hook. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is post-disabled (unless marked otherwise by the - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.post_disable - * - &drm_bridge_funcs.atomic_post_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms + * The bridge must assume that the display pipe (i.e. clocks and timing + * signals) feeding it is no longer running when this callback is + * called. * * The @atomic_post_disable callback is optional. */ diff --git a/include/drm/drm_pagemap.h b/include/drm/drm_pagemap.h index f6e7e234c089..70a7991f784f 100644 --- a/include/drm/drm_pagemap.h +++ b/include/drm/drm_pagemap.h @@ -8,6 +8,7 @@ #define NR_PAGES(order) (1U << (order)) +struct dma_fence; struct drm_pagemap; struct drm_pagemap_zdd; struct device; @@ -174,6 +175,8 @@ struct drm_pagemap_devmem_ops { * @pages: Pointer to array of device memory pages (destination) * @pagemap_addr: Pointer to array of DMA information (source) * @npages: Number of pages to copy + * @pre_migrate_fence: dma-fence to wait for before migration start. + * May be NULL. * * Copy pages to device memory. If the order of a @pagemap_addr entry * is greater than 0, the entry is populated but subsequent entries @@ -183,13 +186,16 @@ struct drm_pagemap_devmem_ops { */ int (*copy_to_devmem)(struct page **pages, struct drm_pagemap_addr *pagemap_addr, - unsigned long npages); + unsigned long npages, + struct dma_fence *pre_migrate_fence); /** * @copy_to_ram: Copy to system RAM (required for migration) * @pages: Pointer to array of device memory pages (source) * @pagemap_addr: Pointer to array of DMA information (destination) * @npages: Number of pages to copy + * @pre_migrate_fence: dma-fence to wait for before migration start. + * May be NULL. * * Copy pages to system RAM. If the order of a @pagemap_addr entry * is greater than 0, the entry is populated but subsequent entries @@ -199,7 +205,8 @@ struct drm_pagemap_devmem_ops { */ int (*copy_to_ram)(struct page **pages, struct drm_pagemap_addr *pagemap_addr, - unsigned long npages); + unsigned long npages, + struct dma_fence *pre_migrate_fence); }; /** @@ -212,6 +219,8 @@ struct drm_pagemap_devmem_ops { * @dpagemap: The struct drm_pagemap of the pages this allocation belongs to. * @size: Size of device memory allocation * @timeslice_expiration: Timeslice expiration in jiffies + * @pre_migrate_fence: Fence to wait for or pipeline behind before migration starts. + * (May be NULL). */ struct drm_pagemap_devmem { struct device *dev; @@ -221,6 +230,7 @@ struct drm_pagemap_devmem { struct drm_pagemap *dpagemap; size_t size; u64 timeslice_expiration; + struct dma_fence *pre_migrate_fence; }; int drm_pagemap_migrate_to_devmem(struct drm_pagemap_devmem *devmem_allocation, @@ -238,7 +248,8 @@ struct drm_pagemap *drm_pagemap_page_to_dpagemap(struct page *page); void drm_pagemap_devmem_init(struct drm_pagemap_devmem *devmem_allocation, struct device *dev, struct mm_struct *mm, const struct drm_pagemap_devmem_ops *ops, - struct drm_pagemap *dpagemap, size_t size); + struct drm_pagemap *dpagemap, size_t size, + struct dma_fence *pre_migrate_fence); int drm_pagemap_populate_mm(struct drm_pagemap *dpagemap, unsigned long start, unsigned long end, |