diff options
| -rw-r--r-- | drivers/soc/qcom/qcom-geni-se.c | 270 | ||||
| -rw-r--r-- | include/linux/soc/qcom/geni-se.h | 19 |
2 files changed, 271 insertions, 18 deletions
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index cd1779b6a91a..15636a8dc907 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -19,6 +19,8 @@ #include <linux/of_platform.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> #include <linux/soc/qcom/geni-se.h> /** @@ -280,6 +282,12 @@ struct se_fw_hdr { #define geni_setbits32(_addr, _v) writel(readl(_addr) | (_v), _addr) #define geni_clrbits32(_addr, _v) writel(readl(_addr) & ~(_v), _addr) +enum domain_idx { + DOMAIN_IDX_POWER, + DOMAIN_IDX_PERF, + DOMAIN_IDX_MAX +}; + /** * geni_se_get_qup_hw_version() - Read the QUP wrapper Hardware version * @se: Pointer to the corresponding serial engine. @@ -582,6 +590,7 @@ static void geni_se_clks_off(struct geni_se *se) clk_disable_unprepare(se->clk); clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks); + clk_disable_unprepare(se->core_clk); } /** @@ -618,7 +627,18 @@ static int geni_se_clks_on(struct geni_se *se) ret = clk_prepare_enable(se->clk); if (ret) - clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks); + goto err_bulk_clks; + + ret = clk_prepare_enable(se->core_clk); + if (ret) + goto err_se_clk; + + return 0; + +err_se_clk: + clk_disable_unprepare(se->clk); +err_bulk_clks: + clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks); return ret; } @@ -899,30 +919,32 @@ EXPORT_SYMBOL_GPL(geni_se_rx_dma_unprep); int geni_icc_get(struct geni_se *se, const char *icc_ddr) { - int i, err; - const char *icc_names[] = {"qup-core", "qup-config", icc_ddr}; + struct geni_icc_path *icc_paths = se->icc_paths; if (has_acpi_companion(se->dev)) return 0; - for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) { - if (!icc_names[i]) - continue; - - se->icc_paths[i].path = devm_of_icc_get(se->dev, icc_names[i]); - if (IS_ERR(se->icc_paths[i].path)) - goto err; + icc_paths[GENI_TO_CORE].path = devm_of_icc_get(se->dev, "qup-core"); + if (IS_ERR(icc_paths[GENI_TO_CORE].path)) + return dev_err_probe(se->dev, PTR_ERR(icc_paths[GENI_TO_CORE].path), + "Failed to get 'qup-core' ICC path\n"); + + icc_paths[CPU_TO_GENI].path = devm_of_icc_get(se->dev, "qup-config"); + if (IS_ERR(icc_paths[CPU_TO_GENI].path)) + return dev_err_probe(se->dev, PTR_ERR(icc_paths[CPU_TO_GENI].path), + "Failed to get 'qup-config' ICC path\n"); + + /* The DDR path is optional, depending on protocol and hw capabilities */ + icc_paths[GENI_TO_DDR].path = devm_of_icc_get(se->dev, "qup-memory"); + if (IS_ERR(icc_paths[GENI_TO_DDR].path)) { + if (PTR_ERR(icc_paths[GENI_TO_DDR].path) == -ENODATA) + icc_paths[GENI_TO_DDR].path = NULL; + else + return dev_err_probe(se->dev, PTR_ERR(icc_paths[GENI_TO_DDR].path), + "Failed to get 'qup-memory' ICC path\n"); } return 0; - -err: - err = PTR_ERR(se->icc_paths[i].path); - if (err != -EPROBE_DEFER) - dev_err_ratelimited(se->dev, "Failed to get ICC path '%s': %d\n", - icc_names[i], err); - return err; - } EXPORT_SYMBOL_GPL(geni_icc_get); @@ -944,6 +966,28 @@ int geni_icc_set_bw(struct geni_se *se) } EXPORT_SYMBOL_GPL(geni_icc_set_bw); +/** + * geni_icc_set_bw_ab() - Set average bandwidth for all ICC paths and apply + * @se: Pointer to the concerned serial engine. + * @core_ab: Average bandwidth in kBps for GENI_TO_CORE path. + * @cfg_ab: Average bandwidth in kBps for CPU_TO_GENI path. + * @ddr_ab: Average bandwidth in kBps for GENI_TO_DDR path. + * + * Sets bandwidth values for all ICC paths and applies them. DDR path is + * optional and only set if it exists. + * + * Return: 0 on success, negative error code on failure. + */ +int geni_icc_set_bw_ab(struct geni_se *se, u32 core_ab, u32 cfg_ab, u32 ddr_ab) +{ + se->icc_paths[GENI_TO_CORE].avg_bw = core_ab; + se->icc_paths[CPU_TO_GENI].avg_bw = cfg_ab; + se->icc_paths[GENI_TO_DDR].avg_bw = ddr_ab; + + return geni_icc_set_bw(se); +} +EXPORT_SYMBOL_GPL(geni_icc_set_bw_ab); + void geni_icc_set_tag(struct geni_se *se, u32 tag) { int i; @@ -989,6 +1033,196 @@ int geni_icc_disable(struct geni_se *se) EXPORT_SYMBOL_GPL(geni_icc_disable); /** + * geni_se_resources_deactivate() - Deactivate GENI SE device resources + * @se: Pointer to the geni_se structure + * + * Deactivates device resources for power saving: OPP rate to 0, pin control + * to sleep state, turns off clocks, and disables interconnect. Skips ACPI devices. + * + * Return: 0 on success, negative error code on failure + */ +int geni_se_resources_deactivate(struct geni_se *se) +{ + int ret; + + if (has_acpi_companion(se->dev)) + return 0; + + if (se->has_opp) + dev_pm_opp_set_rate(se->dev, 0); + + ret = pinctrl_pm_select_sleep_state(se->dev); + if (ret) + return ret; + + geni_se_clks_off(se); + + return geni_icc_disable(se); +} +EXPORT_SYMBOL_GPL(geni_se_resources_deactivate); + +/** + * geni_se_resources_activate() - Activate GENI SE device resources + * @se: Pointer to the geni_se structure + * + * Activates device resources for operation: enables interconnect, prepares clocks, + * and sets pin control to default state. Includes error cleanup. Skips ACPI devices. + * + * Unlike geni_se_resources_deactivate(), this function doesn't alter the + * connected genpds' performance states, which must be additionally handled. + * + * Return: 0 on success, negative error code on failure + */ +int geni_se_resources_activate(struct geni_se *se) +{ + int ret; + + if (has_acpi_companion(se->dev)) + return 0; + + ret = geni_icc_enable(se); + if (ret) + return ret; + + ret = geni_se_clks_on(se); + if (ret) + goto out_icc_disable; + + ret = pinctrl_pm_select_default_state(se->dev); + if (ret) { + geni_se_clks_off(se); + goto out_icc_disable; + } + + return 0; + +out_icc_disable: + geni_icc_disable(se); + return ret; +} +EXPORT_SYMBOL_GPL(geni_se_resources_activate); + +/** + * geni_se_set_perf_level() - Set performance level for GENI SE. + * @se: Pointer to the struct geni_se instance. + * @level: The desired performance level. + * + * Sets the performance level by directly calling dev_pm_opp_set_level + * on the performance device associated with the SE. + * + * Return: 0 on success, or a negative error code on failure. + */ +int geni_se_set_perf_level(struct geni_se *se, unsigned long level) +{ + return dev_pm_opp_set_level(se->pd_list->pd_devs[DOMAIN_IDX_PERF], level); +} +EXPORT_SYMBOL_GPL(geni_se_set_perf_level); + +/** + * geni_se_set_perf_opp() - Set performance OPP for GENI SE by frequency. + * @se: Pointer to the struct geni_se instance. + * @clk_freq: The requested clock frequency. + * + * Finds the nearest operating performance point (OPP) for the given + * clock frequency and applies it to the SE's performance device. + * + * Return: 0 on success, or a negative error code on failure. + */ +int geni_se_set_perf_opp(struct geni_se *se, unsigned long clk_freq) +{ + struct device *perf_dev = se->pd_list->pd_devs[DOMAIN_IDX_PERF]; + struct dev_pm_opp *opp; + int ret; + + opp = dev_pm_opp_find_freq_floor(perf_dev, &clk_freq); + if (IS_ERR(opp)) { + dev_err(se->dev, "failed to find opp for freq %lu\n", clk_freq); + return PTR_ERR(opp); + } + + ret = dev_pm_opp_set_opp(perf_dev, opp); + dev_pm_opp_put(opp); + return ret; +} +EXPORT_SYMBOL_GPL(geni_se_set_perf_opp); + +/** + * geni_se_domain_attach() - Attach power domains to a GENI SE device. + * @se: Pointer to the geni_se structure representing the GENI SE device. + * + * This function attaches the power domains ("power" and "perf") required + * in the SCMI auto-VM environment to the GENI Serial Engine device. It + * initializes se->pd_list with the attached domains. + * + * Return: 0 on success, or a negative error code on failure. + */ +int geni_se_domain_attach(struct geni_se *se) +{ + struct dev_pm_domain_attach_data pd_data = { + .pd_flags = PD_FLAG_DEV_LINK_ON, + .pd_names = (const char*[]) { "power", "perf" }, + .num_pd_names = 2, + }; + int ret; + + ret = devm_pm_domain_attach_list(se->dev, + &pd_data, &se->pd_list); + if (ret == 0) + return -ENODEV; + else if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(geni_se_domain_attach); + +/** + * geni_se_resources_init() - Initialize resources for a GENI SE device. + * @se: Pointer to the geni_se structure representing the GENI SE device. + * + * This function initializes various resources required by the GENI Serial Engine + * (SE) device, including clock resources (core and SE clocks), interconnect + * paths for communication. + * It retrieves optional and mandatory clock resources, adds an OF-based + * operating performance point (OPP) table, and sets up interconnect paths + * with default bandwidths. The function also sets a flag (`has_opp`) to + * indicate whether OPP support is available for the device. + * + * Return: 0 on success, or a negative errno on failure. + */ +int geni_se_resources_init(struct geni_se *se) +{ + int ret; + + se->core_clk = devm_clk_get_optional(se->dev, "core"); + if (IS_ERR(se->core_clk)) + return dev_err_probe(se->dev, PTR_ERR(se->core_clk), + "Failed to get optional core clk\n"); + + se->clk = devm_clk_get(se->dev, "se"); + if (IS_ERR(se->clk) && !has_acpi_companion(se->dev)) + return dev_err_probe(se->dev, PTR_ERR(se->clk), + "Failed to get SE clk\n"); + + ret = devm_pm_opp_set_clkname(se->dev, "se"); + if (ret) + return ret; + + ret = devm_pm_opp_of_add_table(se->dev); + if (ret && ret != -ENODEV) + return dev_err_probe(se->dev, ret, "Failed to add OPP table\n"); + + se->has_opp = (ret == 0); + + ret = geni_icc_get(se, "qup-memory"); + if (ret) + return ret; + + return geni_icc_set_bw_ab(se, GENI_DEFAULT_BW, GENI_DEFAULT_BW, GENI_DEFAULT_BW); +} +EXPORT_SYMBOL_GPL(geni_se_resources_init); + +/** * geni_find_protocol_fw() - Locate and validate SE firmware for a protocol. * @dev: Pointer to the device structure. * @fw: Pointer to the firmware image. diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h index 0a984e2579fe..c5e6ab85df09 100644 --- a/include/linux/soc/qcom/geni-se.h +++ b/include/linux/soc/qcom/geni-se.h @@ -60,18 +60,24 @@ struct geni_icc_path { * @dev: Pointer to the Serial Engine device * @wrapper: Pointer to the parent QUP Wrapper core * @clk: Handle to the core serial engine clock + * @core_clk: Auxiliary clock, which may be required by a protocol * @num_clk_levels: Number of valid clock levels in clk_perf_tbl * @clk_perf_tbl: Table of clock frequency input to serial engine clock * @icc_paths: Array of ICC paths for SE + * @pd_list: Power domain list for managing power domains + * @has_opp: Indicates if OPP is supported */ struct geni_se { void __iomem *base; struct device *dev; struct geni_wrapper *wrapper; struct clk *clk; + struct clk *core_clk; unsigned int num_clk_levels; unsigned long *clk_perf_tbl; struct geni_icc_path icc_paths[3]; + struct dev_pm_domain_list *pd_list; + bool has_opp; }; /* Common SE registers */ @@ -528,12 +534,25 @@ void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len); int geni_icc_get(struct geni_se *se, const char *icc_ddr); int geni_icc_set_bw(struct geni_se *se); +int geni_icc_set_bw_ab(struct geni_se *se, u32 core_ab, u32 cfg_ab, u32 ddr_ab); void geni_icc_set_tag(struct geni_se *se, u32 tag); int geni_icc_enable(struct geni_se *se); int geni_icc_disable(struct geni_se *se); +int geni_se_resources_init(struct geni_se *se); + +int geni_se_resources_activate(struct geni_se *se); + +int geni_se_resources_deactivate(struct geni_se *se); + int geni_load_se_firmware(struct geni_se *se, enum geni_se_protocol_type protocol); + +int geni_se_domain_attach(struct geni_se *se); + +int geni_se_set_perf_level(struct geni_se *se, unsigned long level); + +int geni_se_set_perf_opp(struct geni_se *se, unsigned long clk_freq); #endif #endif |