pinctrl: qcom: ipq5018: replace gcc_plltest with pwm2 on gpio12

The pingroup table has gcc_plltest at function 5 of gpio12 and does not
offer pwm2 on that pin, so the pinmux core rejects a request for pwm2 on
gpio12 as an invalid group. On the hardware, function 5 of gpio12
carries the PWM2 output: the Xiaomi AX3000T v2 drives its blue status
LED from PWM2 on gpio12.

The vendor kernel shipped on that router (Linux 4.4, stock firmware
2.0.28) has pwm2 in this slot. Its pingroup table, as read from the
firmware image, lists these functions for gpio12:

  gpio, blsp0_spi, blsp0_i2c, blsp1_uart0, _, pwm2, qdss_tracedata_a,
  _, _, _

and has pwm3 at function 4 of gpio13, matching commit c6c159fcdb4e
("pinctrl: qcom: ipq5018: add missing pwm3 function on gpio13").

Measured on the board: with gpio12 set to each of the 16 function
values in turn, and PWM2 held at 0% and then at 100% duty, the pad
level read back from GPIO_IN follows PWM2 only at function 5. There it
does not follow PWM channels 0, 1 or 3, and the LED switches with PWM2.
Functions 4 and 7, which the table leaves empty, do not carry PWM2.

Put pwm2 in function 5 of gpio12 and list gpio12 in pwm2_groups. Drop
gpio12 from gcc_plltest_groups: none of its functions is gcc_plltest
any more, and selecting it would trigger the WARN_ON() in
msm_pinmux_set_mux().

Fixes: 725d1c891658 ("pinctrl: qcom: Add IPQ5018 pinctrl driver")
Assisted-by: LLM
Signed-off-by: Adriel Santos <adriel@adriel.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20261002160958.908424-1-adriel@adriel.eu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

0 files changed, 0 insertions, 0 deletions