Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

2 files changed, 349 insertions, 0 deletions

diff --git a/include/linux/net/intel/libie/adminq.h b/include/linux/net/intel/libie/adminq.h
new file mode 100644
index 000000000000..012b5d499c1a
--- /dev/null
+++ b/include/linux/net/intel/libie/adminq.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2025 Intel Corporation */
+
+#ifndef __LIBIE_ADMINQ_H
+#define __LIBIE_ADMINQ_H
+
+#include <linux/build_bug.h>
+#include <linux/types.h>
+
+#define LIBIE_CHECK_STRUCT_LEN(n, X)	\
+	static_assert((n) == sizeof(struct X))
+
+/**
+ * struct libie_aqc_generic - Generic structure used in adminq communication
+ * @param0: generic parameter high 32bit
+ * @param1: generic parameter lower 32bit
+ * @addr_high: generic address high 32bit
+ * @addr_low: generic address lower 32bit
+ */
+struct libie_aqc_generic {
+	__le32 param0;
+	__le32 param1;
+	__le32 addr_high;
+	__le32 addr_low;
+};
+LIBIE_CHECK_STRUCT_LEN(16, libie_aqc_generic);
+
+/**
+ * struct libie_aqc_get_ver -  Used in command get version (direct 0x0001)
+ * @rom_ver: rom version
+ * @fw_build: number coressponding to firmware build
+ * @fw_branch: branch identifier of firmware version
+ * @fw_major: major number of firmware version
+ * @fw_minor: minor number of firmware version
+ * @fw_patch: patch of firmware version
+ * @api_branch: brancch identifier of API version
+ * @api_major: major number of API version
+ * @api_minor: minor number of API version
+ * @api_patch: patch of API version
+ */
+struct libie_aqc_get_ver {
+	__le32	rom_ver;
+	__le32	fw_build;
+	u8	fw_branch;
+	u8	fw_major;
+	u8	fw_minor;
+	u8	fw_patch;
+	u8	api_branch;
+	u8	api_major;
+	u8	api_minor;
+	u8	api_patch;
+};
+LIBIE_CHECK_STRUCT_LEN(16, libie_aqc_get_ver);
+
+/**
+ * struct libie_aqc_driver_ver - Used in command send driver version
+ *				 (indirect 0x0002)
+ * @major_ver: driver major version
+ * @minor_ver: driver minor version
+ * @build_ver: driver build version
+ * @subbuild_ver: driver subbuild version
+ * @reserved: for feature use
+ * @addr_high: high part of response address buff
+ * @addr_low: low part of response address buff
+ */
+struct libie_aqc_driver_ver {
+	u8	major_ver;
+	u8	minor_ver;
+	u8	build_ver;
+	u8	subbuild_ver;
+	u8	reserved[4];
+	__le32	addr_high;
+	__le32	addr_low;
+};
+LIBIE_CHECK_STRUCT_LEN(16, libie_aqc_driver_ver);
+
+enum libie_aq_res_id {
+	LIBIE_AQC_RES_ID_NVM				= 1,
+	LIBIE_AQC_RES_ID_SDP				= 2,
+	LIBIE_AQC_RES_ID_CHNG_LOCK			= 3,
+	LIBIE_AQC_RES_ID_GLBL_LOCK			= 4,
+};
+
+enum libie_aq_res_access_type {
+	LIBIE_AQC_RES_ACCESS_READ			= 1,
+	LIBIE_AQC_RES_ACCESS_WRITE			= 2,
+};
+
+#define LIBIE_AQ_RES_NVM_READ_DFLT_TIMEOUT_MS		3000
+#define LIBIE_AQ_RES_NVM_WRITE_DFLT_TIMEOUT_MS		180000
+#define LIBIE_AQ_RES_CHNG_LOCK_DFLT_TIMEOUT_MS		1000
+#define LIBIE_AQ_RES_GLBL_LOCK_DFLT_TIMEOUT_MS		3000
+
+#define LIBIE_AQ_RES_GLBL_SUCCESS			0
+#define LIBIE_AQ_RES_GLBL_IN_PROG			1
+#define LIBIE_AQ_RES_GLBL_DONE				2
+
+/**
+ * struct libie_aqc_req_res - Request resource ownership
+ * @res_id: resource ID (look at enum definition above)
+ * @access_type: read or write (enum definition above)
+ * @timeout: Upon successful completion, FW writes this value and driver is
+ * expected to release resource before timeout. This value is provided in
+ * milliseconds.
+ * @res_number: for SDP, this is the pin ID of the SDP
+ * @status: status only used for LIBIE_AQC_RES_ID_GLBL_LOCK, for others reserved
+ * @reserved: reserved for future use
+ *
+ * Used in commands:
+ * request resource ownership (direct 0x0008)
+ * request resource ownership (direct 0x0009)
+ */
+struct libie_aqc_req_res {
+	__le16	res_id;
+	__le16	access_type;
+
+	__le32	timeout;
+	__le32	res_number;
+	__le16	status;
+	u8	reserved[2];
+};
+LIBIE_CHECK_STRUCT_LEN(16, libie_aqc_req_res);
+
+/**
+ * struct libie_aqc_list_caps - Getting capabilities
+ * @cmd_flags: command flags
+ * @pf_index: index of PF to get caps from
+ * @reserved: reserved for future use
+ * @count: number of capabilities records
+ * @addr_high: high part of response address buff
+ * @addr_low: low part of response address buff
+ *
+ * Used in commands:
+ * get function capabilities (indirect 0x000A)
+ * get device capabilities (indirect 0x000B)
+ */
+struct libie_aqc_list_caps {
+	u8	cmd_flags;
+	u8	pf_index;
+	u8	reserved[2];
+	__le32	count;
+	__le32	addr_high;
+	__le32	addr_low;
+};
+LIBIE_CHECK_STRUCT_LEN(16, libie_aqc_list_caps);
+
+/* Device/Function buffer entry, repeated per reported capability */
+#define LIBIE_AQC_CAPS_SWITCH_MODE			0x0001
+#define LIBIE_AQC_CAPS_MNG_MODE				0x0002
+#define LIBIE_AQC_CAPS_NPAR_ACTIVE			0x0003
+#define LIBIE_AQC_CAPS_OS2BMC_CAP			0x0004
+#define LIBIE_AQC_CAPS_VALID_FUNCTIONS			0x0005
+#define LIBIE_AQC_MAX_VALID_FUNCTIONS			0x8
+#define LIBIE_AQC_CAPS_SRIOV				0x0012
+#define LIBIE_AQC_CAPS_VF				0x0013
+#define LIBIE_AQC_CAPS_VMDQ				0x0014
+#define LIBIE_AQC_CAPS_8021QBG				0x0015
+#define LIBIE_AQC_CAPS_8021QBR				0x0016
+#define LIBIE_AQC_CAPS_VSI				0x0017
+#define LIBIE_AQC_CAPS_DCB				0x0018
+#define LIBIE_AQC_CAPS_FCOE				0x0021
+#define LIBIE_AQC_CAPS_ISCSI				0x0022
+#define LIBIE_AQC_CAPS_RSS				0x0040
+#define LIBIE_AQC_CAPS_RXQS				0x0041
+#define LIBIE_AQC_CAPS_TXQS				0x0042
+#define LIBIE_AQC_CAPS_MSIX				0x0043
+#define LIBIE_AQC_CAPS_VF_MSIX				0x0044
+#define LIBIE_AQC_CAPS_FD				0x0045
+#define LIBIE_AQC_CAPS_1588				0x0046
+#define LIBIE_AQC_CAPS_MAX_MTU				0x0047
+#define LIBIE_AQC_CAPS_NVM_VER				0x0048
+#define LIBIE_AQC_CAPS_PENDING_NVM_VER			0x0049
+#define LIBIE_AQC_CAPS_OROM_VER				0x004A
+#define LIBIE_AQC_CAPS_PENDING_OROM_VER			0x004B
+#define LIBIE_AQC_CAPS_NET_VER				0x004C
+#define LIBIE_AQC_CAPS_PENDING_NET_VER			0x004D
+#define LIBIE_AQC_CAPS_RDMA				0x0051
+#define LIBIE_AQC_CAPS_LED				0x0061
+#define LIBIE_AQC_CAPS_SDP				0x0062
+#define LIBIE_AQC_CAPS_MDIO				0x0063
+#define LIBIE_AQC_CAPS_WSR_PROT				0x0064
+#define LIBIE_AQC_CAPS_SENSOR_READING			0x0067
+#define LIBIE_AQC_INLINE_IPSEC				0x0070
+#define LIBIE_AQC_CAPS_NUM_ENABLED_PORTS		0x0072
+#define LIBIE_AQC_CAPS_PCIE_RESET_AVOIDANCE		0x0076
+#define LIBIE_AQC_CAPS_POST_UPDATE_RESET_RESTRICT	0x0077
+#define LIBIE_AQC_CAPS_NVM_MGMT				0x0080
+#define LIBIE_AQC_CAPS_EXT_TOPO_DEV_IMG0		0x0081
+#define LIBIE_AQC_CAPS_EXT_TOPO_DEV_IMG1		0x0082
+#define LIBIE_AQC_CAPS_EXT_TOPO_DEV_IMG2		0x0083
+#define LIBIE_AQC_CAPS_EXT_TOPO_DEV_IMG3		0x0084
+#define LIBIE_AQC_CAPS_TX_SCHED_TOPO_COMP_MODE		0x0085
+#define LIBIE_AQC_CAPS_NAC_TOPOLOGY			0x0087
+#define LIBIE_AQC_CAPS_FW_LAG_SUPPORT			0x0092
+#define LIBIE_AQC_BIT_ROCEV2_LAG			0x01
+#define LIBIE_AQC_BIT_SRIOV_LAG				0x02
+#define LIBIE_AQC_CAPS_FLEX10				0x00F1
+#define LIBIE_AQC_CAPS_CEM				0x00F2
+
+/**
+ * struct libie_aqc_list_caps_elem - Getting list of caps elements
+ * @cap: one from the defines list above
+ * @major_ver: major version
+ * @minor_ver: minor version
+ * @number: number of resources described by this capability
+ * @logical_id: logical ID, only meaningful for some types of resources
+ * @phys_id: physical ID, only meaningful for some types of resources
+ * @rsvd1: reserved for future use
+ * @rsvd2: reserved for future use
+ */
+struct libie_aqc_list_caps_elem {
+	__le16	cap;
+
+	u8	major_ver;
+	u8	minor_ver;
+	__le32	number;
+	__le32	logical_id;
+	__le32	phys_id;
+	__le64	rsvd1;
+	__le64	rsvd2;
+};
+LIBIE_CHECK_STRUCT_LEN(32, libie_aqc_list_caps_elem);
+
+/**
+ * struct libie_aq_desc - Admin Queue (AQ) descriptor
+ * @flags: LIBIE_AQ_FLAG_* flags
+ * @opcode: AQ command opcode
+ * @datalen: length in bytes of indirect/external data buffer
+ * @retval: return value from firmware
+ * @cookie_high: opaque data high-half
+ * @cookie_low: opaque data low-half
+ * @params: command-specific parameters
+ *
+ * Descriptor format for commands the driver posts on the Admin Transmit Queue
+ * (ATQ). The firmware writes back onto the command descriptor and returns
+ * the result of the command. Asynchronous events that are not an immediate
+ * result of the command are written to the Admin Receive Queue (ARQ) using
+ * the same descriptor format. Descriptors are in little-endian notation with
+ * 32-bit words.
+ */
+struct libie_aq_desc {
+	__le16	flags;
+	__le16	opcode;
+	__le16	datalen;
+	__le16	retval;
+	__le32	cookie_high;
+	__le32	cookie_low;
+	union {
+		u8	raw[16];
+		struct	libie_aqc_generic generic;
+		struct	libie_aqc_get_ver get_ver;
+		struct	libie_aqc_driver_ver driver_ver;
+		struct	libie_aqc_req_res res_owner;
+		struct	libie_aqc_list_caps get_cap;
+	} params;
+};
+LIBIE_CHECK_STRUCT_LEN(32, libie_aq_desc);
+
+/* FW defined boundary for a large buffer, 4k >= Large buffer > 512 bytes */
+#define LIBIE_AQ_LG_BUF				512
+
+/* Flags sub-structure
+ * |0  |1  |2  |3  |4  |5  |6  |7  |8  |9  |10 |11 |12 |13 |14 |15 |
+ * |DD |CMP|ERR|VFE| * *  RESERVED * * |LB |RD |VFC|BUF|SI |EI |FE |
+ */
+#define LIBIE_AQ_FLAG_DD			BIT(0)	/* 0x1    */
+#define LIBIE_AQ_FLAG_CMP			BIT(1)	/* 0x2    */
+#define LIBIE_AQ_FLAG_ERR			BIT(2)	/* 0x4    */
+#define LIBIE_AQ_FLAG_VFE			BIT(3)	/* 0x8    */
+#define LIBIE_AQ_FLAG_LB			BIT(9)	/* 0x200  */
+#define LIBIE_AQ_FLAG_RD			BIT(10)	/* 0x400  */
+#define LIBIE_AQ_FLAG_VFC			BIT(11) /* 0x800  */
+#define LIBIE_AQ_FLAG_BUF			BIT(12)	/* 0x1000 */
+#define LIBIE_AQ_FLAG_SI			BIT(13)	/* 0x2000 */
+#define LIBIE_AQ_FLAG_EI			BIT(14)	/* 0x4000 */
+#define LIBIE_AQ_FLAG_FE			BIT(15)	/* 0x8000 */
+
+/* error codes */
+enum libie_aq_err {
+	LIBIE_AQ_RC_OK		= 0,  /* Success */
+	LIBIE_AQ_RC_EPERM	= 1,  /* Operation not permitted */
+	LIBIE_AQ_RC_ENOENT	= 2,  /* No such element */
+	LIBIE_AQ_RC_ESRCH	= 3,  /* Bad opcode */
+	LIBIE_AQ_RC_EIO		= 5,  /* I/O error */
+	LIBIE_AQ_RC_EAGAIN	= 8,  /* Try again */
+	LIBIE_AQ_RC_ENOMEM	= 9,  /* Out of memory */
+	LIBIE_AQ_RC_EACCES	= 10, /* Permission denied */
+	LIBIE_AQ_RC_EBUSY	= 12, /* Device or resource busy */
+	LIBIE_AQ_RC_EEXIST	= 13, /* Object already exists */
+	LIBIE_AQ_RC_EINVAL	= 14, /* Invalid argument */
+	LIBIE_AQ_RC_ENOSPC	= 16, /* No space left or allocation failure */
+	LIBIE_AQ_RC_ENOSYS	= 17, /* Function not implemented */
+	LIBIE_AQ_RC_EMODE	= 21, /* Op not allowed in current dev mode */
+	LIBIE_AQ_RC_ENOSEC	= 24, /* Missing security manifest */
+	LIBIE_AQ_RC_EBADSIG	= 25, /* Bad RSA signature */
+	LIBIE_AQ_RC_ESVN	= 26, /* SVN number prohibits this package */
+	LIBIE_AQ_RC_EBADMAN	= 27, /* Manifest hash mismatch */
+	LIBIE_AQ_RC_EBADBUF	= 28, /* Buffer hash mismatches manifest */
+};
+
+static inline void *libie_aq_raw(struct libie_aq_desc *desc)
+{
+	return &desc->params.raw;
+}
+
+const char *libie_aq_str(enum libie_aq_err err);
+
+#endif /* __LIBIE_ADMINQ_H */
diff --git a/include/linux/net/intel/libie/pctype.h b/include/linux/net/intel/libie/pctype.h
new file mode 100644
index 000000000000..d783417fbf36
--- /dev/null
+++ b/include/linux/net/intel/libie/pctype.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2025 Intel Corporation */
+
+#ifndef __LIBIE_PCTYPE_H
+#define __LIBIE_PCTYPE_H
+
+/* Packet Classifier Type indexes, used to set the xxQF_HENA registers. Also
+ * communicated over the virtchnl API as part of struct virtchnl_rss_hashena.
+ */
+enum libie_filter_pctype {
+	/* Note: Values 0-28 are reserved for future use.
+	 * Value 29, 30, 32 are not supported on XL710 and X710.
+	 */
+	LIBIE_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP	= 29,
+	LIBIE_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP	= 30,
+	LIBIE_FILTER_PCTYPE_NONF_IPV4_UDP		= 31,
+	LIBIE_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK	= 32,
+	LIBIE_FILTER_PCTYPE_NONF_IPV4_TCP		= 33,
+	LIBIE_FILTER_PCTYPE_NONF_IPV4_SCTP		= 34,
+	LIBIE_FILTER_PCTYPE_NONF_IPV4_OTHER		= 35,
+	LIBIE_FILTER_PCTYPE_FRAG_IPV4			= 36,
+	/* Note: Values 37-38 are reserved for future use.
+	 * Value 39, 40, 42 are not supported on XL710 and X710.
+	 */
+	LIBIE_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP	= 39,
+	LIBIE_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP	= 40,
+	LIBIE_FILTER_PCTYPE_NONF_IPV6_UDP		= 41,
+	LIBIE_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK	= 42,
+	LIBIE_FILTER_PCTYPE_NONF_IPV6_TCP		= 43,
+	LIBIE_FILTER_PCTYPE_NONF_IPV6_SCTP		= 44,
+	LIBIE_FILTER_PCTYPE_NONF_IPV6_OTHER		= 45,
+	LIBIE_FILTER_PCTYPE_FRAG_IPV6			= 46,
+	/* Note: Value 47 is reserved for future use */
+	LIBIE_FILTER_PCTYPE_FCOE_OX			= 48,
+	LIBIE_FILTER_PCTYPE_FCOE_RX			= 49,
+	LIBIE_FILTER_PCTYPE_FCOE_OTHER			= 50,
+	/* Note: Values 51-62 are reserved for future use */
+	LIBIE_FILTER_PCTYPE_L2_PAYLOAD			= 63
+};
+
+#endif /* __LIBIE_PCTYPE_H */