Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...

1 files changed, 7 insertions, 12 deletions

diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index 443f6d05ce29..0fb79c4afb46 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -78,7 +78,6 @@
 struct hym8563 {
 	struct i2c_client	*client;
 	struct rtc_device	*rtc;
-	bool			valid;
 #ifdef CONFIG_COMMON_CLK
 	struct clk_hw		clkout_hw;
 #endif
@@ -91,19 +90,19 @@ struct hym8563 {
 static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct hym8563 *hym8563 = i2c_get_clientdata(client);
 	u8 buf[7];
 	int ret;
 
-	if (!hym8563->valid) {
-		dev_warn(&client->dev, "no valid clock/calendar values available\n");
-		return -EPERM;
-	}
-
 	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
 	if (ret < 0)
 		return ret;
 
+	if (buf[0] & HYM8563_SEC_VL) {
+		dev_warn(&client->dev,
+			 "no valid clock/calendar values available\n");
+		return -EINVAL;
+	}
+
 	tm->tm_sec = bcd2bin(buf[0] & HYM8563_SEC_MASK);
 	tm->tm_min = bcd2bin(buf[1] & HYM8563_MIN_MASK);
 	tm->tm_hour = bcd2bin(buf[2] & HYM8563_HOUR_MASK);
@@ -118,7 +117,6 @@ static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct hym8563 *hym8563 = i2c_get_clientdata(client);
 	u8 buf[7];
 	int ret;
 
@@ -157,8 +155,6 @@ static int hym8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	if (ret < 0)
 		return ret;
 
-	hym8563->valid = true;
-
 	return 0;
 }
 
@@ -556,9 +552,8 @@ static int hym8563_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	hym8563->valid = !(ret & HYM8563_SEC_VL);
 	dev_dbg(&client->dev, "rtc information is %s\n",
-		hym8563->valid ? "valid" : "invalid");
+		(ret & HYM8563_SEC_VL) ? "invalid" : "valid");
 
 	hym8563->rtc = devm_rtc_device_register(&client->dev, client->name,
 						&hym8563_rtc_ops, THIS_MODULE);