power: supply: fix typos in comments

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Link: https://patch.msgid.link/20260907063947.34852-2-hemanth.selam@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

6 files changed, 8 insertions, 8 deletions

diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index 741a45cc5f35..f7510ada6b73 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -1590,7 +1590,7 @@ static int bq25890_suspend(struct device *dev)
 	struct bq25890_device *bq = dev_get_drvdata(dev);
 
 	/*
-	 * If charger is removed, while in suspend, make sure ADC is diabled
+	 * If charger is removed, while in suspend, make sure ADC is disabled
 	 * since it consumes slightly more power.
 	 */
 	return bq25890_field_write(bq, F_CONV_RATE, 0);
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index fd4cd9cd2ce2..8e8c5109401a 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -904,7 +904,7 @@ static bool cm_setup_timer(void)
 }
 
 /**
- * charger_extcon_work - enable/diable charger according to the state
+ * charger_extcon_work - enable/disable charger according to the state
  *			of charger cable
  *
  * @work: work_struct of the function charger_extcon_work.
diff --git a/drivers/power/supply/da9030_battery.c b/drivers/power/supply/da9030_battery.c
index d25279c26030..8c4daec0a6b6 100644
--- a/drivers/power/supply/da9030_battery.c
+++ b/drivers/power/supply/da9030_battery.c
@@ -263,7 +263,7 @@ static void da9030_charger_check_state(struct da9030_charger *charger)
 		} else if (charger->adc.vbat_res >
 			   charger->thresholds.vbat_low) {
 			/* we are charging and passed LOW_THRESH,
-			   so upate DA9030 VBAT threshold
+			   so update DA9030 VBAT threshold
 			 */
 			da903x_write(charger->master, DA9030_VBATMON,
 				     charger->thresholds.vbat_low);
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index cbf3ac9c3e14..a53970af56cb 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -1080,7 +1080,7 @@ static int max17042_init_chip(struct max17042_chip *chip)
 		/* update capacity params */
 		max17042_update_capacity_regs(chip);
 
-		/* delay must be atleast 350mS to allow VFSOC
+		/* delay must be at least 350mS to allow VFSOC
 		 * to be calculated from the new configuration
 		 */
 		msleep(350);
diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c
index e7b4e10dcfd5..bc40bbb429e6 100644
--- a/drivers/power/supply/sbs-charger.c
+++ b/drivers/power/supply/sbs-charger.c
@@ -2,10 +2,10 @@
 /*
  * Copyright (c) 2016, Prodys S.L.
  *
- * This adds support for sbs-charger compilant chips as defined here:
+ * This adds support for sbs-charger compliant chips as defined here:
  * http://sbs-forum.org/specs/sbc110.pdf
  *
- * Implemetation based on sbs-battery.c
+ * Implementation based on sbs-battery.c
  */
 
 #include <linux/init.h>
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
index c1b67dac8ef6..72dfa15b3d80 100644
--- a/drivers/power/supply/smb347-charger.c
+++ b/drivers/power/supply/smb347-charger.c
@@ -149,7 +149,7 @@
  * @pre_charge_current: current (in uA) to use in pre-charging phase
  * @termination_current: current (in uA) used to determine when the
  *			 charging cycle terminates
- * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ * @pre_to_fast_voltage: voltage (in uV) threshold used for transitioning to
  *			 pre-charge to fast charge mode
  * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
  * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
@@ -302,7 +302,7 @@ static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val)
  *
  * Function checks whether any power source is connected to the charger and
  * updates internal state accordingly. If there is a change to previous state
- * function returns %1, otherwise %0 and negative errno in case of errror.
+ * function returns %1, otherwise %0 and negative errno in case of error.
  */
 static int smb347_update_ps_status(struct smb347_charger *smb)
 {