Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 653 insertions, 0 deletions

diff --git a/drivers/net/wireless/broadcom/b43/phy_common.c b/drivers/net/wireless/broadcom/b43/phy_common.c
new file mode 100644
index 000000000000..ec2b9c577b90
--- /dev/null
+++ b/drivers/net/wireless/broadcom/b43/phy_common.c
@@ -0,0 +1,653 @@
+/*
+
+  Broadcom B43 wireless driver
+  Common PHY routines
+
+  Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+  Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+  Copyright (c) 2005-2008 Michael Buesch <m@bues.ch>
+  Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
+  Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; see the file COPYING.  If not, write to
+  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+  Boston, MA 02110-1301, USA.
+
+*/
+
+#include "phy_common.h"
+#include "phy_g.h"
+#include "phy_a.h"
+#include "phy_n.h"
+#include "phy_lp.h"
+#include "phy_ht.h"
+#include "phy_lcn.h"
+#include "phy_ac.h"
+#include "b43.h"
+#include "main.h"
+
+
+int b43_phy_allocate(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &(dev->phy);
+	int err;
+
+	phy->ops = NULL;
+
+	switch (phy->type) {
+	case B43_PHYTYPE_G:
+#ifdef CONFIG_B43_PHY_G
+		phy->ops = &b43_phyops_g;
+#endif
+		break;
+	case B43_PHYTYPE_N:
+#ifdef CONFIG_B43_PHY_N
+		phy->ops = &b43_phyops_n;
+#endif
+		break;
+	case B43_PHYTYPE_LP:
+#ifdef CONFIG_B43_PHY_LP
+		phy->ops = &b43_phyops_lp;
+#endif
+		break;
+	case B43_PHYTYPE_HT:
+#ifdef CONFIG_B43_PHY_HT
+		phy->ops = &b43_phyops_ht;
+#endif
+		break;
+	case B43_PHYTYPE_LCN:
+#ifdef CONFIG_B43_PHY_LCN
+		phy->ops = &b43_phyops_lcn;
+#endif
+		break;
+	case B43_PHYTYPE_AC:
+#ifdef CONFIG_B43_PHY_AC
+		phy->ops = &b43_phyops_ac;
+#endif
+		break;
+	}
+	if (B43_WARN_ON(!phy->ops))
+		return -ENODEV;
+
+	err = phy->ops->allocate(dev);
+	if (err)
+		phy->ops = NULL;
+
+	return err;
+}
+
+void b43_phy_free(struct b43_wldev *dev)
+{
+	dev->phy.ops->free(dev);
+	dev->phy.ops = NULL;
+}
+
+int b43_phy_init(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	const struct b43_phy_operations *ops = phy->ops;
+	int err;
+
+	/* During PHY init we need to use some channel. On the first init this
+	 * function is called *before* b43_op_config, so our pointer is NULL.
+	 */
+	if (!phy->chandef) {
+		phy->chandef = &dev->wl->hw->conf.chandef;
+		phy->channel = phy->chandef->chan->hw_value;
+	}
+
+	phy->ops->switch_analog(dev, true);
+	b43_software_rfkill(dev, false);
+
+	err = ops->init(dev);
+	if (err) {
+		b43err(dev->wl, "PHY init failed\n");
+		goto err_block_rf;
+	}
+	phy->do_full_init = false;
+
+	err = b43_switch_channel(dev, phy->channel);
+	if (err) {
+		b43err(dev->wl, "PHY init: Channel switch to default failed\n");
+		goto err_phy_exit;
+	}
+
+	return 0;
+
+err_phy_exit:
+	phy->do_full_init = true;
+	if (ops->exit)
+		ops->exit(dev);
+err_block_rf:
+	b43_software_rfkill(dev, true);
+
+	return err;
+}
+
+void b43_phy_exit(struct b43_wldev *dev)
+{
+	const struct b43_phy_operations *ops = dev->phy.ops;
+
+	b43_software_rfkill(dev, true);
+	dev->phy.do_full_init = true;
+	if (ops->exit)
+		ops->exit(dev);
+}
+
+bool b43_has_hardware_pctl(struct b43_wldev *dev)
+{
+	if (!dev->phy.hardware_power_control)
+		return false;
+	if (!dev->phy.ops->supports_hwpctl)
+		return false;
+	return dev->phy.ops->supports_hwpctl(dev);
+}
+
+void b43_radio_lock(struct b43_wldev *dev)
+{
+	u32 macctl;
+
+#if B43_DEBUG
+	B43_WARN_ON(dev->phy.radio_locked);
+	dev->phy.radio_locked = true;
+#endif
+
+	macctl = b43_read32(dev, B43_MMIO_MACCTL);
+	macctl |= B43_MACCTL_RADIOLOCK;
+	b43_write32(dev, B43_MMIO_MACCTL, macctl);
+	/* Commit the write and wait for the firmware
+	 * to finish any radio register access. */
+	b43_read32(dev, B43_MMIO_MACCTL);
+	udelay(10);
+}
+
+void b43_radio_unlock(struct b43_wldev *dev)
+{
+	u32 macctl;
+
+#if B43_DEBUG
+	B43_WARN_ON(!dev->phy.radio_locked);
+	dev->phy.radio_locked = false;
+#endif
+
+	/* Commit any write */
+	b43_read16(dev, B43_MMIO_PHY_VER);
+	/* unlock */
+	macctl = b43_read32(dev, B43_MMIO_MACCTL);
+	macctl &= ~B43_MACCTL_RADIOLOCK;
+	b43_write32(dev, B43_MMIO_MACCTL, macctl);
+}
+
+void b43_phy_lock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+	B43_WARN_ON(dev->phy.phy_locked);
+	dev->phy.phy_locked = true;
+#endif
+	B43_WARN_ON(dev->dev->core_rev < 3);
+
+	if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+		b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
+}
+
+void b43_phy_unlock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+	B43_WARN_ON(!dev->phy.phy_locked);
+	dev->phy.phy_locked = false;
+#endif
+	B43_WARN_ON(dev->dev->core_rev < 3);
+
+	if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+		b43_power_saving_ctl_bits(dev, 0);
+}
+
+static inline void assert_mac_suspended(struct b43_wldev *dev)
+{
+	if (!B43_DEBUG)
+		return;
+	if ((b43_status(dev) >= B43_STAT_INITIALIZED) &&
+	    (dev->mac_suspended <= 0)) {
+		b43dbg(dev->wl, "PHY/RADIO register access with "
+		       "enabled MAC.\n");
+		dump_stack();
+	}
+}
+
+u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
+{
+	assert_mac_suspended(dev);
+	dev->phy.writes_counter = 0;
+	return dev->phy.ops->radio_read(dev, reg);
+}
+
+void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	assert_mac_suspended(dev);
+	if (b43_bus_host_is_pci(dev->dev) &&
+	    ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
+		b43_read32(dev, B43_MMIO_MACCTL);
+		dev->phy.writes_counter = 1;
+	}
+	dev->phy.ops->radio_write(dev, reg, value);
+}
+
+void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+	b43_radio_write16(dev, offset,
+			  b43_radio_read16(dev, offset) & mask);
+}
+
+void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+	b43_radio_write16(dev, offset,
+			  b43_radio_read16(dev, offset) | set);
+}
+
+void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+	b43_radio_write16(dev, offset,
+			  (b43_radio_read16(dev, offset) & mask) | set);
+}
+
+bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask,
+			  u16 value, int delay, int timeout)
+{
+	u16 val;
+	int i;
+
+	for (i = 0; i < timeout; i += delay) {
+		val = b43_radio_read(dev, offset);
+		if ((val & mask) == value)
+			return true;
+		udelay(delay);
+	}
+	return false;
+}
+
+u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
+{
+	assert_mac_suspended(dev);
+	dev->phy.writes_counter = 0;
+
+	if (dev->phy.ops->phy_read)
+		return dev->phy.ops->phy_read(dev, reg);
+
+	b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	assert_mac_suspended(dev);
+	if (b43_bus_host_is_pci(dev->dev) &&
+	    ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
+		b43_read16(dev, B43_MMIO_PHY_VER);
+		dev->phy.writes_counter = 1;
+	}
+
+	if (dev->phy.ops->phy_write)
+		return dev->phy.ops->phy_write(dev, reg, value);
+
+	b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
+{
+	b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
+}
+
+void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+	if (dev->phy.ops->phy_maskset) {
+		assert_mac_suspended(dev);
+		dev->phy.ops->phy_maskset(dev, offset, mask, 0);
+	} else {
+		b43_phy_write(dev, offset,
+			      b43_phy_read(dev, offset) & mask);
+	}
+}
+
+void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+	if (dev->phy.ops->phy_maskset) {
+		assert_mac_suspended(dev);
+		dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set);
+	} else {
+		b43_phy_write(dev, offset,
+			      b43_phy_read(dev, offset) | set);
+	}
+}
+
+void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+	if (dev->phy.ops->phy_maskset) {
+		assert_mac_suspended(dev);
+		dev->phy.ops->phy_maskset(dev, offset, mask, set);
+	} else {
+		b43_phy_write(dev, offset,
+			      (b43_phy_read(dev, offset) & mask) | set);
+	}
+}
+
+void b43_phy_put_into_reset(struct b43_wldev *dev)
+{
+	u32 tmp;
+
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~B43_BCMA_IOCTL_GMODE;
+		tmp |= B43_BCMA_IOCTL_PHY_RESET;
+		tmp |= BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~B43_TMSLOW_GMODE;
+		tmp |= B43_TMSLOW_PHYRESET;
+		tmp |= SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		usleep_range(1000, 2000);
+
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		usleep_range(1000, 2000);
+
+		break;
+#endif
+	}
+}
+
+void b43_phy_take_out_of_reset(struct b43_wldev *dev)
+{
+	u32 tmp;
+
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		/* Unset reset bit (with forcing clock) */
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~B43_BCMA_IOCTL_PHY_RESET;
+		tmp &= ~B43_BCMA_IOCTL_PHY_CLKEN;
+		tmp |= BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+
+		/* Do not force clock anymore */
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~BCMA_IOCTL_FGC;
+		tmp |= B43_BCMA_IOCTL_PHY_CLKEN;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		udelay(1);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		/* Unset reset bit (with forcing clock) */
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~B43_TMSLOW_PHYRESET;
+		tmp &= ~B43_TMSLOW_PHYCLKEN;
+		tmp |= SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
+		usleep_range(1000, 2000);
+
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		tmp &= ~SSB_TMSLOW_FGC;
+		tmp |= B43_TMSLOW_PHYCLKEN;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
+		usleep_range(1000, 2000);
+		break;
+#endif
+	}
+}
+
+int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
+{
+	struct b43_phy *phy = &(dev->phy);
+	u16 channelcookie, savedcookie;
+	int err;
+
+	/* First we set the channel radio code to prevent the
+	 * firmware from sending ghost packets.
+	 */
+	channelcookie = new_channel;
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+		channelcookie |= B43_SHM_SH_CHAN_5GHZ;
+	/* FIXME: set 40Mhz flag if required */
+	if (0)
+		channelcookie |= B43_SHM_SH_CHAN_40MHZ;
+	savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
+
+	/* Now try to switch the PHY hardware channel. */
+	err = phy->ops->switch_channel(dev, new_channel);
+	if (err)
+		goto err_restore_cookie;
+
+	/* Wait for the radio to tune to the channel and stabilize. */
+	msleep(8);
+
+	return 0;
+
+err_restore_cookie:
+	b43_shm_write16(dev, B43_SHM_SHARED,
+			B43_SHM_SH_CHAN, savedcookie);
+
+	return err;
+}
+
+void b43_software_rfkill(struct b43_wldev *dev, bool blocked)
+{
+	struct b43_phy *phy = &dev->phy;
+
+	b43_mac_suspend(dev);
+	phy->ops->software_rfkill(dev, blocked);
+	phy->radio_on = !blocked;
+	b43_mac_enable(dev);
+}
+
+/**
+ * b43_phy_txpower_adjust_work - TX power workqueue.
+ *
+ * Workqueue for updating the TX power parameters in hardware.
+ */
+void b43_phy_txpower_adjust_work(struct work_struct *work)
+{
+	struct b43_wl *wl = container_of(work, struct b43_wl,
+					 txpower_adjust_work);
+	struct b43_wldev *dev;
+
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+
+	if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED)))
+		dev->phy.ops->adjust_txpower(dev);
+
+	mutex_unlock(&wl->mutex);
+}
+
+void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
+{
+	struct b43_phy *phy = &dev->phy;
+	unsigned long now = jiffies;
+	enum b43_txpwr_result result;
+
+	if (!(flags & B43_TXPWR_IGNORE_TIME)) {
+		/* Check if it's time for a TXpower check. */
+		if (time_before(now, phy->next_txpwr_check_time))
+			return; /* Not yet */
+	}
+	/* The next check will be needed in two seconds, or later. */
+	phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2));
+
+	if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) &&
+	    (dev->dev->board_type == SSB_BOARD_BU4306))
+		return; /* No software txpower adjustment needed */
+
+	result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI));
+	if (result == B43_TXPWR_RES_DONE)
+		return; /* We are done. */
+	B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST);
+	B43_WARN_ON(phy->ops->adjust_txpower == NULL);
+
+	/* We must adjust the transmission power in hardware.
+	 * Schedule b43_phy_txpower_adjust_work(). */
+	ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work);
+}
+
+int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
+{
+	const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK);
+	unsigned int a, b, c, d;
+	unsigned int average;
+	u32 tmp;
+
+	tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset);
+	a = tmp & 0xFF;
+	b = (tmp >> 8) & 0xFF;
+	c = (tmp >> 16) & 0xFF;
+	d = (tmp >> 24) & 0xFF;
+	if (a == 0 || a == B43_TSSI_MAX ||
+	    b == 0 || b == B43_TSSI_MAX ||
+	    c == 0 || c == B43_TSSI_MAX ||
+	    d == 0 || d == B43_TSSI_MAX)
+		return -ENOENT;
+	/* The values are OK. Clear them. */
+	tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) |
+	      (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24);
+	b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp);
+
+	if (is_ofdm) {
+		a = (a + 32) & 0x3F;
+		b = (b + 32) & 0x3F;
+		c = (c + 32) & 0x3F;
+		d = (d + 32) & 0x3F;
+	}
+
+	/* Get the average of the values with 0.5 added to each value. */
+	average = (a + b + c + d + 2) / 4;
+	if (is_ofdm) {
+		/* Adjust for CCK-boost */
+		if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1)
+		    & B43_HF_CCKBOOST)
+			average = (average >= 13) ? (average - 13) : 0;
+	}
+
+	return average;
+}
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}
+
+
+bool b43_is_40mhz(struct b43_wldev *dev)
+{
+	return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
+void b43_phy_force_clock(struct b43_wldev *dev, bool force)
+{
+	u32 tmp;
+
+	WARN_ON(dev->phy.type != B43_PHYTYPE_N &&
+		dev->phy.type != B43_PHYTYPE_HT &&
+		dev->phy.type != B43_PHYTYPE_AC);
+
+	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		if (force)
+			tmp |= BCMA_IOCTL_FGC;
+		else
+			tmp &= ~BCMA_IOCTL_FGC;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		break;
+#endif
+#ifdef CONFIG_B43_SSB
+	case B43_BUS_SSB:
+		tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
+		if (force)
+			tmp |= SSB_TMSLOW_FGC;
+		else
+			tmp &= ~SSB_TMSLOW_FGC;
+		ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
+		break;
+#endif
+	}
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
+struct b43_c32 b43_cordic(int theta)
+{
+	static const u32 arctg[] = {
+		2949120, 1740967, 919879, 466945, 234379, 117304,
+		  58666,   29335,  14668,   7334,   3667,   1833,
+		    917,     458,    229,    115,     57,     29,
+	};
+	u8 i;
+	s32 tmp;
+	s8 signx = 1;
+	u32 angle = 0;
+	struct b43_c32 ret = { .i = 39797, .q = 0, };
+
+	while (theta > (180 << 16))
+		theta -= (360 << 16);
+	while (theta < -(180 << 16))
+		theta += (360 << 16);
+
+	if (theta > (90 << 16)) {
+		theta -= (180 << 16);
+		signx = -1;
+	} else if (theta < -(90 << 16)) {
+		theta += (180 << 16);
+		signx = -1;
+	}
+
+	for (i = 0; i <= 17; i++) {
+		if (theta > angle) {
+			tmp = ret.i - (ret.q >> i);
+			ret.q += ret.i >> i;
+			ret.i = tmp;
+			angle += arctg[i];
+		} else {
+			tmp = ret.i + (ret.q >> i);
+			ret.q -= ret.i >> i;
+			ret.i = tmp;
+			angle -= arctg[i];
+		}
+	}
+
+	ret.i *= signx;
+	ret.q *= signx;
+
+	return ret;
+}