Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

1 files changed, 39 insertions, 4 deletions

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index d9f5942ccc44..232bbd79a4de 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -230,7 +230,9 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 	int i;
 	unsigned long gpio_bits = dev->driver_info->data;
 
-	usbnet_get_endpoints(dev,intf);
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
 
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
@@ -625,6 +627,21 @@ static void ax88772_suspend(struct usbnet *dev)
 		   asix_read_medium_status(dev, 1));
 }
 
+/* Notes on PM callbacks and locking context:
+ *
+ * - asix_suspend()/asix_resume() are invoked for both runtime PM and
+ *   system-wide suspend/resume. For struct usb_driver the ->resume()
+ *   callback does not receive pm_message_t, so the resume type cannot
+ *   be distinguished here.
+ *
+ * - The MAC driver must hold RTNL when calling phylink interfaces such as
+ *   phylink_suspend()/resume(). Those calls will also perform MDIO I/O.
+ *
+ * - Taking RTNL and doing MDIO from a runtime-PM resume callback (while
+ *   the USB PM lock is held) is fragile. Since autosuspend brings no
+ *   measurable power saving here, we block it by holding a PM usage
+ *   reference in ax88772_bind().
+ */
 static int asix_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
@@ -676,7 +693,7 @@ static int ax88772_init_mdio(struct usbnet *dev)
 	priv->mdio->read = &asix_mdio_bus_read;
 	priv->mdio->write = &asix_mdio_bus_write;
 	priv->mdio->name = "Asix MDIO Bus";
-	priv->mdio->phy_mask = ~(BIT(priv->phy_addr) | BIT(AX_EMBD_PHY_ADDR));
+	priv->mdio->phy_mask = ~(BIT(priv->phy_addr & 0x1f) | BIT(AX_EMBD_PHY_ADDR));
 	/* mii bus name is usb-<usb bus number>-<usb device number> */
 	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
 		 dev->udev->bus->busnum, dev->udev->devnum);
@@ -833,7 +850,9 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev->driver_priv = priv;
 
-	usbnet_get_endpoints(dev, intf);
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		return ret;
 
 	/* Maybe the boot loader passed the MAC address via device tree */
 	if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) {
@@ -919,6 +938,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (ret)
 		goto initphy_err;
 
+	/* Keep this interface runtime-PM active by taking a usage ref.
+	 * Prevents runtime suspend while bound and avoids resume paths
+	 * that could deadlock (autoresume under RTNL while USB PM lock
+	 * is held, phylink/MDIO wants RTNL).
+	 */
+	pm_runtime_get_noresume(&intf->dev);
+
 	return 0;
 
 initphy_err:
@@ -948,6 +974,8 @@ static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
 	phylink_destroy(priv->phylink);
 	ax88772_mdio_unregister(priv);
 	asix_rx_fixup_common_free(dev->driver_priv);
+	/* Drop the PM usage ref taken in bind() */
+	pm_runtime_put(&intf->dev);
 }
 
 static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
@@ -1257,7 +1285,9 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	int ret;
 	u8 buf[ETH_ALEN] = {0};
 
-	usbnet_get_endpoints(dev,intf);
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		return ret;
 
 	/* Get the MAC address */
 	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
@@ -1600,6 +1630,11 @@ static struct usb_driver asix_driver = {
 	.resume =	asix_resume,
 	.reset_resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
+	/* usbnet enables autosuspend by default (supports_autosuspend=1).
+	 * We keep runtime-PM active for AX88772* by taking a PM usage
+	 * reference in ax88772_bind() (pm_runtime_get_noresume()) and
+	 * dropping it in unbind(), which effectively blocks autosuspend.
+	 */
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };