Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO driver updates from Greg KH:
 "Here is the big set of char, misc, iio, and other smaller driver
  subsystems for 6.15-rc1. Lots of stuff in here, including:

   - loads of IIO changes and driver updates

   - counter driver updates

   - w1 driver updates

   - faux conversions for some drivers that were abusing the platform
     bus interface

   - coresight driver updates

   - rust miscdevice binding updates based on real-world-use

   - other minor driver updates

  All of these have been in linux-next with no reported issues for quite
  a while"

* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
  samples: rust_misc_device: fix markup in top-level docs
  Coresight: Fix a NULL vs IS_ERR() bug in probe
  misc: lis3lv02d: convert to use faux_device
  tlclk: convert to use faux_device
  regulator: dummy: convert to use the faux device interface
  bus: mhi: host: Fix race between unprepare and queue_buf
  coresight: configfs: Constify struct config_item_type
  doc: iio: ad7380: describe offload support
  iio: ad7380: add support for SPI offload
  iio: light: Add check for array bounds in veml6075_read_int_time_ms
  iio: adc: ti-ads7924 Drop unnecessary function parameters
  staging: iio: ad9834: Use devm_regulator_get_enable()
  staging: iio: ad9832: Use devm_regulator_get_enable()
  iio: gyro: bmg160_spi: add of_match_table
  dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
  iio: adc: ad7768-1: remove unnecessary locking
  Documentation: ABI: add wideband filter type to sysfs-bus-iio
  iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
  iio: adc: ad7768-1: Fix conversion result sign
  iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
  ...

23 files changed, 922 insertions, 38 deletions

diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
index cb8dceaca70e..4787d7c6bac2 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -101,6 +101,29 @@ properties:
           and ETF configurations.
         $ref: /schemas/graph.yaml#/properties/port
 
+  memory-region:
+    items:
+      - description: Reserved trace buffer memory for ETR and ETF sinks.
+          For ETR, this reserved memory region is used for trace data capture.
+          Same region is used for trace data retention as well after a panic
+          or watchdog reset.
+          This reserved memory region is used as trace buffer or used for trace
+          data retention only if specifically selected by the user in sysfs
+          interface.
+          The default memory usage models for ETR in sysfs/perf modes are
+          otherwise unaltered.
+
+          For ETF, this reserved memory region is used by default for
+          retention of trace data synced from internal SRAM after a panic
+          or watchdog reset.
+      - description: Reserved meta data memory. Used for ETR and ETF sinks
+          for storing metadata.
+
+  memory-region-names:
+    items:
+      - const: tracedata
+      - const: metadata
+
 required:
   - compatible
   - reg
@@ -115,6 +138,9 @@ examples:
     etr@20070000 {
         compatible = "arm,coresight-tmc", "arm,primecell";
         reg = <0x20070000 0x1000>;
+        memory-region = <&etr_trace_mem_reserved>,
+                       <&etr_mdata_mem_reserved>;
+        memory-region-names = "tracedata", "metadata";
 
         clocks = <&oscclk6a>;
         clock-names = "apb_pclk";
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
new file mode 100644
index 000000000000..843b52eaf872
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-ctcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight TMC Control Unit
+
+maintainers:
+  - Yuanfang Zhang <quic_yuanfang@quicinc.com>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Jie Gan <quic_jiegan@quicinc.com>
+
+description: |
+  The Trace Memory Controller(TMC) is used for Embedded Trace Buffer(ETB),
+  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) configurations.
+  The configuration mode (ETB, ETF, ETR) is discovered at boot time when
+  the device is probed.
+
+  The Coresight TMC Control unit controls various Coresight behaviors.
+  It works as a helper device when connected to TMC ETR device.
+  It is responsible for controlling the data filter function based on
+  the source device's Trace ID for TMC ETR device. The trace data with
+  that Trace id can get into ETR's buffer while other trace data gets
+  ignored.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-ctcu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-1])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - in-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    ctcu@1001000 {
+        compatible = "qcom,sa8775p-ctcu";
+        reg = <0x1001000 0x1000>;
+
+        clocks = <&aoss_qmp>;
+        clock-names = "apb";
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                ctcu_in_port0: endpoint {
+                    remote-endpoint = <&etr0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                ctcu_in_port1: endpoint {
+                    remote-endpoint = <&etr1_out_port>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index 76163abed655..5ed40f21b8eb 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -55,8 +55,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 8eec07d9d454..07d21a3617f5 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -41,8 +41,7 @@ properties:
       - const: arm,primecell
 
   reg:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   qcom,dsb-element-bits:
     description:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
new file mode 100644
index 000000000000..54e7349317b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+# Copyright 2024 BayLibre, SAS.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4030 and AD4630 ADC families
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices AD4030 single channel and AD4630/AD4632 dual channel precision
+  SAR ADC families
+
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4030-24-4032-24.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-24_ad4632-24.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-16-4632-16.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4030-24
+      - adi,ad4032-24
+      - adi,ad4630-16
+      - adi,ad4630-24
+      - adi,ad4632-16
+      - adi,ad4632-24
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 102040816
+
+  spi-rx-bus-width:
+    enum: [1, 2, 4]
+
+  vdd-5v-supply: true
+  vdd-1v8-supply: true
+  vio-supply: true
+
+  ref-supply:
+    description:
+      Optional External unbuffered reference. Used when refin-supply is not
+      connected.
+
+  refin-supply:
+    description:
+      Internal buffered Reference. Used when ref-supply is not connected.
+
+  cnv-gpios:
+    description:
+      The Convert Input (CNV). It initiates the sampling conversions.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      The Reset Input (/RST). Used for asynchronous device reset.
+    maxItems: 1
+
+  interrupts:
+    description:
+      The BUSY pin is used to signal that the conversions results are available
+      to be transferred when in SPI Clocking Mode. This nodes should be
+      connected to an interrupt that is triggered when the BUSY line goes low.
+    maxItems: 1
+
+  interrupt-names:
+    const: busy
+
+required:
+  - compatible
+  - reg
+  - vdd-5v-supply
+  - vdd-1v8-supply
+  - vio-supply
+  - cnv-gpios
+
+oneOf:
+  - required:
+      - ref-supply
+  - required:
+      - refin-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4030-24";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-5v-supply = <&supply_5V>;
+            vdd-1v8-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
index 7d2229dee444..cbde7a0505d2 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
@@ -84,6 +84,10 @@ properties:
     description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
     maxItems: 1
 
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
   interrupts:
     minItems: 1
     items:
@@ -106,6 +110,15 @@ properties:
       The first cell is the GPn number: 0 to 3.
       The second cell takes standard GPIO flags.
 
+  '#trigger-source-cells':
+    description: |
+      First cell indicates the output signal: 0 = BUSY, 1 = ALERT.
+      Second cell indicates which GPn pin is used: 0, 2 or 3.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad4695.h.
+    const: 2
+
   "#address-cells":
     const: 1
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
new file mode 100644
index 000000000000..c6676d91b4e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4851.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD485X family
+
+maintainers:
+  - Sergiu Cuciurean <sergiu.cuciurean@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Analog Devices AD485X fully buffered, 8-channel simultaneous sampling,
+  16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
+  common-mode range inputs.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4855.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4856.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4857.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4858.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4851
+      - adi,ad4852
+      - adi,ad4853
+      - adi,ad4854
+      - adi,ad4855
+      - adi,ad4856
+      - adi,ad4857
+      - adi,ad4858
+      - adi,ad4858i
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+  vee-supply: true
+
+  vdd-supply: true
+
+  vddh-supply: true
+
+  vddl-supply: true
+
+  vio-supply: true
+
+  vrefbuf-supply: true
+
+  vrefio-supply: true
+
+  pwms:
+    description: PWM connected to the CNV pin.
+    maxItems: 1
+
+  io-backends:
+    maxItems: 1
+
+  pd-gpios:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel(@[0-7])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description:
+          The channel number, as specified in the datasheet (from 0 to 7).
+        minimum: 0
+        maximum: 7
+
+      diff-channels:
+        description:
+          Each channel can be configured as a bipolar differential channel.
+          The ADC uses the same positive and negative inputs for this.
+          This property must be specified as 'reg' (or the channel number) for
+          both positive and negative inputs (i.e. diff-channels = <reg reg>).
+          Since the configuration is bipolar differential, the 'bipolar'
+          property is required.
+        items:
+          minimum: 0
+          maximum: 7
+
+      bipolar: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vee-supply
+  - vdd-supply
+  - vio-supply
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0{
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "adi,ad4858";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            vcc-supply = <&vcc>;
+            vdd-supply = <&vdd>;
+            vee-supply = <&vee>;
+            vddh-supply = <&vddh>;
+            vddl-supply = <&vddl>;
+            vio-supply = <&vio>;
+            pwms = <&pwm_gen 0 0>;
+            io-backends = <&iio_backend>;
+
+            channel@0 {
+              reg = <0>;
+              diff-channels = <0 0>;
+              bipolar;
+            };
+
+            channel@1 {
+              reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
new file mode 100644
index 000000000000..801ed319ee82
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7191 ADC
+
+maintainers:
+  - Alisa-Dariana Roman <alisa.roman@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7191 ADC device. Datasheet can be
+  found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7191.pdf
+  The device's PDOWN pin must be connected to the SPI controller's chip select
+  pin.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7191
+
+  reg:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Must be present when CLKSEL pin is tied HIGH to select external clock
+      source (either a crystal between MCLK1 and MCLK2 pins, or a
+      CMOS-compatible clock driving MCLK2 pin). Must be absent when CLKSEL pin
+      is tied LOW to use the internal 4.92MHz clock.
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: AVdd voltage supply
+
+  dvdd-supply:
+    description: DVdd voltage supply
+
+  vref-supply:
+    description: Vref voltage supply
+
+  odr-gpios:
+    description:
+      ODR1 and ODR2 pins for output data rate selection. Should be defined if
+      adi,odr-value is absent.
+    minItems: 2
+    maxItems: 2
+
+  adi,odr-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should be present if ODR pins are pin-strapped. Possible values:
+      120 Hz (ODR1=0, ODR2=0)
+      60 Hz (ODR1=0, ODR2=1)
+      50 Hz (ODR1=1, ODR2=0)
+      10 Hz (ODR1=1, ODR2=1)
+      If defined, odr-gpios must be absent.
+    enum: [120, 60, 50, 10]
+
+  pga-gpios:
+    description:
+      PGA1 and PGA2 pins for gain selection. Should be defined if adi,pga-value
+      is absent.
+    minItems: 2
+    maxItems: 2
+
+  adi,pga-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should be present if PGA pins are pin-strapped. Possible values:
+      Gain 1 (PGA1=0, PGA2=0)
+      Gain 8 (PGA1=0, PGA2=1)
+      Gain 64 (PGA1=1, PGA2=0)
+      Gain 128 (PGA1=1, PGA2=1)
+      If defined, pga-gpios must be absent.
+    enum: [1, 8, 64, 128]
+
+  temp-gpios:
+    description: TEMP pin for temperature sensor enable.
+    maxItems: 1
+
+  chan-gpios:
+    description: CHAN pin for input channel selection.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - dvdd-supply
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+  - temp-gpios
+  - chan-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - oneOf:
+      - required:
+          - adi,odr-value
+      - required:
+          - odr-gpios
+  - oneOf:
+      - required:
+          - adi,pga-value
+      - required:
+          - pga-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7191";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7191_mclk>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            avdd-supply = <&avdd>;
+            dvdd-supply = <&dvdd>;
+            vref-supply = <&vref>;
+            adi,pga-value = <1>;
+            odr-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 24 GPIO_ACTIVE_HIGH>;
+            temp-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            chan-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index ada08005b3cd..ff4f5c21c548 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -27,6 +27,7 @@ description: |
   * https://www.analog.com/en/products/ad7388-4.html
   * https://www.analog.com/en/products/adaq4370-4.html
   * https://www.analog.com/en/products/adaq4380-4.html
+  * https://www.analog.com/en/products/adaq4381-4.html
 
 
 $ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -50,6 +51,7 @@ properties:
       - adi,ad7388-4
       - adi,adaq4370-4
       - adi,adaq4380-4
+      - adi,adaq4381-4
 
   reg:
     maxItems: 1
@@ -201,6 +203,7 @@ allOf:
             - adi,ad7380-4
             - adi,adaq4370-4
             - adi,adaq4380-4
+            - adi,adaq4381-4
     then:
       properties:
         refio-supply: false
@@ -218,6 +221,7 @@ allOf:
           enum:
             - adi,adaq4370-4
             - adi,adaq4380-4
+            - adi,adaq4381-4
     then:
       required:
         - vs-p-supply
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index e1f450b80db2..cf74f84d6103 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -17,13 +17,25 @@ description: |
   interface for the actual ADC, while this IP core will interface
   to the data-lines of the ADC and handle the streaming of data into
   memory via DMA.
+  In some cases, the AXI ADC interface is used to perform specialized
+  operation to a particular ADC, e.g access the physical bus through
+  specific registers to write ADC registers.
+  In this case, we use a different compatible which indicates the target
+  IP core's name.
+  The following IP is currently supported:
+    - AXI AD7606x: specialized version of the IP core for all the chips from
+      the ad7606 family.
 
   https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+  https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html
+  http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
 
 properties:
   compatible:
     enum:
       - adi,axi-adc-10.0.a
+      - adi,axi-ad7606x
+      - adi,axi-ad485x
 
   reg:
     maxItems: 1
@@ -47,17 +59,48 @@ properties:
   '#io-backend-cells':
     const: 0
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+    additionalProperties: true
+    required:
+      - compatible
+      - reg
+
 required:
   - compatible
   - dmas
   - reg
   - clocks
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: adi,axi-ad7606x
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+      patternProperties:
+        "^adc@[0-9a-f]+$": false
+
 additionalProperties: false
 
 examples:
   - |
-    axi-adc@44a00000 {
+    adc@44a00000 {
         compatible = "adi,axi-adc-10.0.a";
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
@@ -65,4 +108,31 @@ examples:
         clocks = <&axi_clk>;
         #io-backend-cells = <0>;
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    parallel_bus_controller@44a00000 {
+        compatible = "adi,axi-ad7606x";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
+        clocks = <&ext_clk>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606b";
+            reg = <0>;
+            pwms = <&axi_pwm_gen 0 0>;
+            pwm-names = "convst1";
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
+                            &gpio0 87 GPIO_ACTIVE_HIGH
+                            &gpio0 86 GPIO_ACTIVE_HIGH>;
+            io-backends = <&parallel_bus_controller>;
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
index dfc3f512918f..c2e5ff418920 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@@ -19,7 +19,14 @@ description:
 
 properties:
   compatible:
-    const: nxp,imx93-adc
+    oneOf:
+      - enum:
+          - nxp,imx93-adc
+      - items:
+          - enum:
+              - nxp,imx94-adc
+              - nxp,imx95-adc
+          - const: nxp,imx93-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index fd93ed3991e0..41e0c56ef8e3 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -15,6 +15,8 @@ properties:
       - const: rockchip,saradc
       - const: rockchip,rk3066-tsadc
       - const: rockchip,rk3399-saradc
+      - const: rockchip,rk3528-saradc
+      - const: rockchip,rk3562-saradc
       - const: rockchip,rk3588-saradc
       - items:
           - const: rockchip,rk3576-saradc
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml
new file mode 100644
index 000000000000..a51893e207d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7128/ADS7138 analog-to-digital converter (ADC)
+
+maintainers:
+  - Tobias Sperling <tobias.sperling@softing.com>
+
+description: |
+  The ADS7128 and ADS7138 chips are 12-bit, 8 channel analog-to-digital
+  converters (ADC) with build-in digital window comparator (DWC), using the
+  I2C interface.
+  ADS7128 differs in the addition of further hardware features, like a
+  root-mean-square (RMS) and a zero-crossing-detect (ZCD) module.
+
+  Datasheets:
+    https://www.ti.com/product/ADS7128
+    https://www.ti.com/product/ADS7138
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7128
+      - ti,ads7138
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      The regulator used as analog supply voltage as well as reference voltage.
+
+  interrupts:
+    description:
+      Interrupt on ALERT pin, triggers on low level.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@10 {
+            compatible = "ti,ads7138";
+            reg = <0x10>;
+            avdd-supply = <&reg_stb_3v3>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index 9eb9928500e2..3e323f1a5458 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -55,18 +55,18 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         dac@0 {
-           reg = <0>;
-           compatible = "adi,ad5390-5";
-           vref-supply = <&dacvref>;
+            reg = <0>;
+            compatible = "adi,ad5390-5";
+            vref-supply = <&dacvref>;
         };
     };
   - |
     i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       dac@42 {
-          reg = <0x42>;
-          compatible = "adi,ad5380-3";
-       };
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@42 {
+            reg = <0x42>;
+            compatible = "adi,ad5380-3";
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 1cb2adaf66f9..53d607441612 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -30,8 +30,9 @@ properties:
 
   clock-names:
     description:
-      Must be "clkin"
-    maxItems: 1
+      Must be "clkin" if the input reference is single ended or "clkin-diff"
+      if the input reference is differential.
+    enum: [clkin, clkin-diff]
 
   adi,mute-till-lock-en:
     type: boolean
diff --git a/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml
index ed0ea938f7f8..1e25cf781cf1 100644
--- a/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml
@@ -43,13 +43,13 @@ additionalProperties: false
 examples:
   - |
     i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-       temperature-sensor@43 {
-           compatible = "sciosense,ens210";
-           reg = <0x43>;
-       };
+        temperature-sensor@43 {
+            compatible = "sciosense,ens210";
+            reg = <0x43>;
+        };
     };
 ...
 
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
new file mode 100644
index 000000000000..a4c273c7a67f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16550 and similar IMUs
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+  - Ramona Gradinariu <ramona.gradinariu@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+  - Robert Budai <robert.budai@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16550
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 15000000
+
+  vdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Active low RESET pin.
+    maxItems: 1
+
+  clocks:
+    description: If not provided, then the internal clock is used.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+  - vdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        imu@0 {
+            compatible = "adi,adis16550";
+            reg = <0>;
+            spi-max-frequency = <15000000>;
+            spi-cpol;
+            spi-cpha;
+            vdd-supply = <&vdd>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml b/Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml
new file mode 100644
index 000000000000..bb1cc4404a55
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/brcm,apds9160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Combined Proximity & Ambient light sensor
+
+maintainers:
+  - Mikael Gonella-Bolduc <m.gonella.bolduc@gmail.com>
+
+description: |
+  Datasheet: https://docs.broadcom.com/docs/APDS-9160-003-DS
+
+properties:
+  compatible:
+    enum:
+      - brcm,apds9160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  ps-cancellation-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Proximity sensor cancellation pulse duration in half clock cycles.
+      This parameter determines a cancellation pulse duration.
+      The cancellation is applied in the integration phase to cancel out
+      unwanted reflected light from very near objects such as tempered glass
+      in front of the sensor.
+    default: 0
+    maximum: 63
+
+  ps-cancellation-current-picoamp:
+    description:
+      Proximity sensor crosstalk cancellation current in picoampere.
+      This parameter adjusts the current in steps of 2400 pA up to 276000 pA.
+      The provided value must be a multiple of 2400 and in one of these ranges
+      [60000 - 96000]
+      [120000 - 156000]
+      [180000 - 216000]
+      [240000 - 276000]
+      This parameter is used in conjunction with the cancellation duration.
+    minimum: 60000
+    maximum: 276000
+    multipleOf: 2400
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "brcm,apds9160";
+            reg = <0x53>;
+            vdd-supply = <&vdd_reg>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&pinctrl>;
+            ps-cancellation-duration = <10>;
+            ps-cancellation-current-picoamp = <62400>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
index a3a979553e32..f1048c30e73e 100644
--- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
@@ -4,14 +4,16 @@
 $id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dyna-Image AL3010 sensor
+title: Dyna-Image AL3000a/AL3010 sensor
 
 maintainers:
   - David Heidelberg <david@ixit.cz>
 
 properties:
   compatible:
-    const: dynaimage,al3010
+    enum:
+      - dynaimage,al3000a
+      - dynaimage,al3010
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml b/Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml
new file mode 100644
index 000000000000..d4a3f7981c36
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/silabs,si7210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Si7210 magnetic position and temperature sensor
+
+maintainers:
+  - Antoni Pokusinski <apokusinski01@gmail.com>
+
+description: |
+  Silabs Si7210 I2C Hall effect magnetic position and temperature sensor.
+  https://www.silabs.com/documents/public/data-sheets/si7210-datasheet.pdf
+
+properties:
+  compatible:
+    const: silabs,si7210
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        magnetometer@30 {
+            compatible = "silabs,si7210";
+            reg = <0x30>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd_3v3_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index 7cc365e0ebc8..7c0c6ab6fc69 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -40,15 +40,15 @@ unevaluatedProperties: false
 examples:
   - |
     spi {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       temperature-sensor@0 {
-           compatible = "maxim,max31865";
-           reg = <0>;
-           spi-max-frequency = <400000>;
-           spi-cpha;
-           maxim,3-wire;
-       };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@0 {
+            compatible = "maxim,max31865";
+            reg = <0>;
+            spi-max-frequency = <400000>;
+            spi-cpha;
+            maxim,3-wire;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
index 58aa1542776b..fbba5e934861 100644
--- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -44,8 +44,8 @@ examples:
         #size-cells = <0>;
 
         tmp117@48 {
-             compatible = "ti,tmp117";
-             reg = <0x48>;
-             vcc-supply = <&pmic_reg_3v3>;
+            compatible = "ti,tmp117";
+            reg = <0x48>;
+            vcc-supply = <&pmic_reg_3v3>;
         };
     };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 8704b0dfc9c0..8da408107e55 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -193,6 +193,8 @@ properties:
           - maxim,max20751
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
+            # mCube 3-axis 8-bit digital accelerometer
+          - mcube,mc3510c
             # Measurement Specialities I2C temperature and humidity sensor
           - meas,htu21
             # Measurement Specialities I2C temperature and humidity sensor