Merge tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.12-rc1.

  Nothing "major" in here, except for a new 9p network gadget that has
  been worked on for a long time (all of the needed acks are here)

  Other than that, it's the usual set of:

   - Thunderbolt / USB4 driver updates and additions for new hardware

   - dwc3 driver updates and new features added

   - xhci driver updates

   - typec driver updates

   - USB gadget updates and api additions to make some gadgets more
     configurable by userspace

   - dwc2 driver updates

   - usb phy driver updates

   - usbip feature additions

   - other minor USB driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  sub: cdns3: Use predefined PCI vendor ID constant
  sub: cdns2: Use predefined PCI vendor ID constant
  USB: misc: yurex: fix race between read and write
  USB: misc: cypress_cy7c63: check for short transfer
  USB: appledisplay: close race between probe and completion handler
  USB: class: CDC-ACM: fix race between get_serial and set_serial
  usb: r8a66597-hcd: make read-only const arrays static
  usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
  usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
  usb: storage: ene_ub6250: Fix right shift warnings
  usb: roles: Improve the fix for a false positive recursive locking complaint
  locking/mutex: Introduce mutex_init_with_key()
  locking/mutex: Define mutex_init() once
  net/9p/usbg: fix CONFIG_USB_GADGET dependency
  usb: xhci: fix loss of data on Cadence xHC
  usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
  usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
  usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
  usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
  usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
  ...

5 files changed, 88 insertions, 112 deletions

diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
index f4b1ca2fb562..ce665a2779b7 100644
--- a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
@@ -87,6 +87,12 @@ properties:
     maximum: 119
     default: 100
 
+  nxp,sim:
+    description:
+      The system integration module (SIM) provides system control and chip
+      configuration registers.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
 required:
   - compatible
   - reg
@@ -110,6 +116,17 @@ allOf:
       required:
         - fsl,anatop
 
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx7ulp-usbphy
+    then:
+      required:
+        - nxp,sim
+    else:
+      properties:
+        nxp,sim: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml
new file mode 100644
index 000000000000..a44bdf391887
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,ls1028a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale layerscape SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,ls1028a-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1028a-dwc3
+      - const: snps,dwc3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@fe800000 {
+        compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+        reg = <0xfe800000 0x100000>;
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
deleted file mode 100644
index afc30e98b123..000000000000
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-MSM SoC HSUSB controllers
-
-EHCI
-
-Required properties:
-- compatible:	Should contain "qcom,ehci-host"
-- regs:			offset and length of the register set in the memory map
-- usb-phy:		phandle for the PHY device
-
-Example EHCI controller device node:
-
-	ehci: ehci@f9a55000 {
-		compatible = "qcom,ehci-host";
-		reg = <0xf9a55000 0x400>;
-		usb-phy = <&usb_otg>;
-	};
-
-USB PHY with optional OTG:
-
-Required properties:
-- compatible:   Should contain:
-  "qcom,usb-otg-ci" for chipsets with ChipIdea 45nm PHY
-  "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
-
-- regs:         Offset and length of the register set in the memory map
-- interrupts:   interrupt-specifier for the OTG interrupt.
-
-- clocks:       A list of phandle + clock-specifier pairs for the
-                clocks listed in clock-names
-- clock-names:  Should contain the following:
-  "phy"         USB PHY reference clock
-  "core"        Protocol engine clock
-  "iface"       Interface bus clock
-  "alt_core"    Protocol engine clock for targets with asynchronous
-                reset methodology. (optional)
-
-- vdccx-supply: phandle to the regulator for the vdd supply for
-                digital circuit operation.
-- v1p8-supply:  phandle to the regulator for the 1.8V supply
-- v3p3-supply:  phandle to the regulator for the 3.3V supply
-
-- resets:       A list of phandle + reset-specifier pairs for the
-                resets listed in reset-names
-- reset-names:  Should contain the following:
-  "phy"         USB PHY controller reset
-  "link"        USB LINK controller reset
-
-- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
-                1 - PHY control
-                2 - PMIC control
-
-Optional properties:
-- dr_mode:      One of "host", "peripheral" or "otg". Defaults to "otg"
-
-- switch-gpio:  A phandle + gpio-specifier pair. Some boards are using Dual
-                SPDT USB Switch, witch is controlled by GPIO to de/multiplex
-                D+/D- USB lines between connectors.
-
-- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device
-                Mode Eye Diagram test. Start address at which these values will be
-                written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
-                "do not overwrite default value at this address".
-                For example: qcom,phy-init-sequence = < -1 0x63 >;
-                Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1.
-
-- qcom,phy-num: Select number of pyco-phy to use, can be one of
-                0 - PHY one, default
-                1 - Second PHY
-                Some platforms may have configuration to allow USB
-                controller work with any of the two HSPHYs present.
-
-- qcom,vdd-levels: This property must be a list of three integer values
-                (no, min, max) where each value represents either a voltage
-                in microvolts or a value corresponding to voltage corner.
-
-- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy
-                and controller driver therefore enables pull-up explicitly
-                before starting controller using usbcmd run/stop bit.
-
-- extcon:       phandles to external connector devices. First phandle
-                should point to external connector, which provide "USB"
-                cable events, the second should point to external connector
-                device, which provide "USB-HOST" cable events. If one of
-                the external connector devices is not required empty <0>
-                phandle should be specified.
-
-Example HSUSB OTG controller device node:
-
-    usb@f9a55000 {
-        compatible = "qcom,usb-otg-snps";
-        reg = <0xf9a55000 0x400>;
-        interrupts = <0 134 0>;
-        dr_mode = "peripheral";
-
-        clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
-                <&gcc GCC_USB_HS_AHB_CLK>;
-
-        clock-names = "phy", "core", "iface";
-
-        vddcx-supply = <&pm8841_s2_corner>;
-        v1p8-supply = <&pm8941_l6>;
-        v3p3-supply = <&pm8941_l24>;
-
-        resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
-        reset-names = "phy", "link";
-
-        qcom,otg-control = <1>;
-        qcom,phy-init-sequence = < -1 0x63 >;
-        qcom,vdd-levels = <1 5 7>;
-	};
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index aef42dacc202..18758efb8d29 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -52,6 +52,7 @@ properties:
           - qcom,sm8550-dwc3
           - qcom,sm8650-dwc3
           - qcom,x1e80100-dwc3
+          - qcom,x1e80100-dwc3-mp
       - const: qcom,dwc3
 
   reg:
@@ -289,6 +290,7 @@ allOf:
               - qcom,sc8280xp-dwc3
               - qcom,sc8280xp-dwc3-mp
               - qcom,x1e80100-dwc3
+              - qcom,x1e80100-dwc3-mp
     then:
       properties:
         clocks:
@@ -428,6 +430,21 @@ allOf:
           contains:
             enum:
               - qcom,ipq5332-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,x1e80100-dwc3
     then:
       properties:
@@ -486,6 +503,7 @@ allOf:
           contains:
             enum:
               - qcom,sc8180x-dwc3-mp
+              - qcom,x1e80100-dwc3-mp
     then:
       properties:
         interrupts:
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index 95ff9791baea..653a89586f4e 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -13,10 +13,9 @@ properties:
   compatible:
     oneOf:
       - const: ti,j721e-usb
-      - const: ti,am64-usb
       - items:
-          - const: ti,j721e-usb
           - const: ti,am64-usb
+          - const: ti,j721e-usb
 
   reg:
     maxItems: 1